cAP ax is far away from being a regular home AP IMO.
Even if there is no CAP on the quickset why there is no WISP AP?
No access to HUB admins, so I will just create direct As2sB.HUB needs to add matching policy for each peer
How to measure jitter ?In practical terms, jitter values below 100 ms rarely cause voice drop-outs as most VoIP equipment has de-jittering buffers which handle that, but such high values already cause some discomfort as 200 ms round-trip delay is at the edge of acceptability.
I also do not understand how LEVEL_A_ gets priority over LEVEL_B_ and then over LEVEL_C_.Implementing VoIP traffic prioritization (Qos) with RouterOS v6 – Option 2
If I have s2s ipsec VPN will it go into "OTHER"?Implementing VoIP traffic prioritization (Qos) with RouterOS v6 – Option 2
Yes, sorry for ambiguous expression. Your rules handle packets forwarded by the router between the other end of the IPsec tunnel and other devices on its local LAN, my rules handle packets received and sent by your router itself.
1 chain=input action=accept protocol=tcp src-address=10.1.101.0/24 dst-port=22 log=no log-prefix="" ipsec-policy=in,ipsec
2 chain=output action=accept protocol=tcp dst-address=10.1.101.0/24 src-port=22 log=no log-prefix="" ipsec-policy=out,ipsec
Added in-interface=ether1 on NAT, hope it saves my life.Don't see any interfaces on your dst nat rules, add your WAN interface as "in" interface on these rules