Community discussions

Search found 30 matches

by eider
Sun Mar 10, 2019 9:36 pm
Forum: SwOS
Topic: Older SwOS not available anymore.
Replies: 4
Views: 646

Re: Older SwOS not available anymore.

Your best bet is to open support ticket with MikroTik and ask for firmware file. There is no other way to remotely go back to 2.7p.
by eider
Sat Mar 09, 2019 9:15 pm
Forum: SwOS
Topic: Older SwOS not available anymore.
Replies: 4
Views: 646

Re: Older SwOS not available anymore.

Isn't 2.7p factory version? You should be able to run it by following reinstall/reset configuration manual (https://forum.mikrotik.com/viewtopic.php?t=137254#p679168). Since 2.7p would be > 2.7, the lowest available SwOS you can downgrade to would be 2.8 - https://download.mikrotik.com/swos2/css328p...
by eider
Thu Feb 07, 2019 11:30 am
Forum: SwOS
Topic: How does SwOS have access to Internet? Anyone to disable it?
Replies: 6
Views: 961

Re: How does SwOS have access to Internet? Anyone to disable it?

SwOS has no access to Internet - System page and update check is done client-side via JavaScript XHR request.
by eider
Thu Nov 22, 2018 12:27 pm
Forum: General
Topic: Configuration backup encrypted with default password in RouterOS v6.43.4 does not work like other versions of RouterOS
Replies: 6
Views: 1576

Re: Configuration backup encrypted with default password in RouterOS v6.43.4 does not work like other versions of Router

In newer version password is no longer stored as plain-text so it can not be used to encrypt backup file without user explicitly providing password.
by eider
Sat Nov 03, 2018 12:18 am
Forum: RouterBOARD hardware
Topic: hEX S no comms on any port with sfp1 iface disabled
Replies: 6
Views: 822

Re: hEX S no comms on any port with sfp1 iface disabled

Can confirm and I've reported this already under #2018091622001254 - they're fixing it in future versions. Do note that not all ports are affected - check block diagram.
by eider
Mon Oct 29, 2018 9:03 am
Forum: SwOS
Topic: CSS326-24G-2S+RM incorrect stats
Replies: 4
Views: 4052

Re: CSS326-24G-2S+RM incorrect stats

Already reported here: viewtopic.php?f=17&t=139046
by eider
Thu Oct 04, 2018 4:40 pm
Forum: General
Topic: DHCP client behavior change?
Replies: 0
Views: 226

DHCP client behavior change?

Was there any recent change in DHCP client behavior? It used to send DHCPREQUEST as broadcast (rebind) when using "/ip dhcp-client renew" but is now sending unicast (renew) to DHCP server and does not time out (silently ignores situation where no response is received and does not fall back to rebind...
by eider
Wed Sep 19, 2018 12:43 pm
Forum: RouterBOARD hardware
Topic: RB1100 dead
Replies: 12
Views: 1359

Re: RB1100 dead

Ethernet should be connected to ETH13 which is labeled as POE/BOOT if you wish to use Netinstall.
by eider
Tue Sep 18, 2018 3:17 pm
Forum: RouterBOARD hardware
Topic: Compatibility SFP and SFP +
Replies: 4
Views: 1203

Re: Compatibility SFP and SFP +

Yes, DACs usually do support SFP as well as SFP+. The one you listed definitely does. Obviously keep in mind that you won't get 10Gbps over SFP.
by eider
Fri Sep 14, 2018 1:10 pm
Forum: SwOS
Topic: CRS317 boot issue after power failure
Replies: 22
Views: 3219

Re: CRS317 boot issue after power failure

There are a lot of issues with auto-upgrade in SwOS. For example right now I see 2.7 as newest despite 2.8 being released for quite a while now. Attempting to manually fetch 2.9 via crafted links fail so most likely it was not planned to be released today or they found critical bug in last moment an...
by eider
Wed Sep 12, 2018 10:11 pm
Forum: SwOS
Topic: CSS106 Address Aquisition fallback default ip
Replies: 2
Views: 744

Re: CSS106 Address Aquisition fallback default ip

No, it will not. Confirmed this few days ago when setting small lab with CSS106 and CRS series router, both had same IP, tho in that case it was simple to resolve because of MAC Winbox.
by eider
Wed Sep 12, 2018 9:11 am
Forum: SwOS
Topic: CSS106-5G-1S v2.8 bogus TX and RX unicast counter with bit 32 set.
Replies: 7
Views: 1209

Re: CSS106-5G-1S v2.8 bogus TX and RX unicast counter with bit 32 set.

Ah, I see. You are indeed right. didn't notice h-variant of these values are not zero. Yes, it looks like there's some issue with CPU counter improperly increasing upper bits. Would be interesting to catch a moment when it's being increased.
by eider
Tue Sep 11, 2018 10:09 pm
Forum: Announcements
Topic: SwOS version 2.8 released!
Replies: 37
Views: 12995

Re: SwOS version 2.8 released!

There seems to be some issue with CSS106 and 64-bit counter - either both SNMP and JavaScript are not updated to support it or internally this switch still uses 32-bit counters despite SNMP and JavaScript expecting 64-bit. Either way, this causes bogus values to be printed, despite switch actually p...
by eider
Tue Sep 11, 2018 10:06 pm
Forum: SwOS
Topic: CSS106-5G-1S v2.8 bogus TX and RX unicast counter with bit 32 set.
Replies: 7
Views: 1209

Re: CSS106-5G-1S v2.8 bogus TX and RX unicast counter with bit 32 set.

Perhaps just the fact that the web page was being displayed has something to do with the counters being incorrect. No, but web page constantly updates its stats so packets are being generated. Where do you enter the /stats.b and /sys.b ? These are just URI. You'll need to navigate to "http://192.16...
by eider
Tue Sep 11, 2018 8:27 pm
Forum: SwOS
Topic: CSS106 & Uptime
Replies: 5
Views: 1591

Re: CSS106 & Uptime

Again, I really don't know why it's not present on web interface. It's present in form of timeticks in response from /sys.b. Seems like an obvious thing to have there when switch itself reports it and especially if it was there before. upt:0x0204c23d 0x0204c23d = 33866301 / 100 = 338663 = 94 hours =...
by eider
Tue Sep 11, 2018 8:16 pm
Forum: SwOS
Topic: CSS106-5G-1S v2.8 bogus TX and RX unicast counter with bit 32 set.
Replies: 7
Views: 1209

Re: CSS106-5G-1S v2.8 bogus TX and RX unicast counter with bit 32 set.

That's a nice find! It looks like SwOS is calculating and counting packets correctly, however JavaScript code was not updated to reflect recent changed of counters to 64-bit, hence the issue. In actual response from /stats.b you'll find proper values in 'rup' (ordered by port #, from 0 to 5). In my ...
by eider
Tue Sep 11, 2018 9:22 am
Forum: Beginner Basics
Topic: RB2011 slow internet even with fasttrack
Replies: 98
Views: 13453

Re: RB2011 slow internet even with fasttrack

You should verify that hardware offloading is being enabled (indicated by H indicator on bridge port) and verify which functions are supported with it for your device's switch chip and confirm you're not running with any of incompatible options enabled.
by eider
Tue Sep 11, 2018 9:13 am
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 148
Views: 28806

Re: v6.43 [current] is released!

Hi, I've found issue in 6.43 when creating/editing new user via web interface.
I believe editing being blocked is intentional. Definitely a bug when creating new user however.
by eider
Tue Sep 11, 2018 1:23 am
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 148
Views: 28806

Re: v6.43 [current] is released!

Since updating RouterBOOT to 6.43 I can now see "Boot OS" option under Routerboard->Settings for cAP lite. I'm pretty sure that cAP lite does not support SwOS.

Image
by eider
Mon Sep 10, 2018 5:47 pm
Forum: General
Topic: hex S (RB760iGS) lane switching issue
Replies: 0
Views: 364

hex S (RB760iGS) lane switching issue

There seems to be an issue with hex S lane-switching feature, which could also be related to reports of other people having on link on SFP modules. As far as I observed, switching lane from Ethernet ports to SFP works fine, however switching from SFP to Ethernet does not - as soon as SFP module is r...
by eider
Mon Sep 10, 2018 4:52 pm
Forum: General
Topic: Winbox System->Health is shown on cAP lite when not supported
Replies: 2
Views: 247

Re: Winbox System->Health is shown on cAP lite when not supported

Actually Winbox is capable of adapting to hardware so long as it receives proper descriptors from device (they depend on RouterOS version, you can check roteros.jg in %appdata%\Mikrotik\Winbox for list of excluded devices for this particular menu). For example RB951G-2HnD is also missing health moni...
by eider
Mon Sep 10, 2018 3:04 pm
Forum: General
Topic: CCR1009-8G-1S not discovered in winbox
Replies: 1
Views: 320

Re: CCR1009-8G-1S not discovered in winbox

Check discovery interfaces first. If you find no issues there check if you have VirtualBox Host-Only Interface installed and enabled. In some cases Windows seems to favor this interface over Ethernet and causes Winbox to send broadcast requests for MDP over wrong interface. Had this happen twice alr...
by eider
Mon Sep 10, 2018 2:37 pm
Forum: Beginner Basics
Topic: RB2011 slow internet even with fasttrack
Replies: 98
Views: 13453

Re: RB2011 slow internet even with fasttrack

I'm running 6.42.7 currently on routerOS and firmware Read https://forum.mikrotik.com/viewtopic.php?f=21&t=128915 and https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Bridge_Hardware_Offloading And next time when doing upgrade - read changelog for every version since the one you have inst...
by eider
Mon Sep 10, 2018 2:24 pm
Forum: General
Topic: Winbox System->Health is shown on cAP lite when not supported
Replies: 2
Views: 247

Winbox System->Health is shown on cAP lite when not supported

Running 6.43 stable, on cAP lite there is Health option under System in Winbox. cAP lite does not support Health monitoring as far as I'm aware so it should not be visible there. Opening it shows very small window with 'OK' 'Cancel' and 'Apply' options and no content.

Image
by eider
Tue Sep 04, 2018 9:54 am
Forum: General
Topic: std failure: broken path (2). what is this?
Replies: 2
Views: 441

Re: std failure: broken path (2). what is this?

Looks like a bug with PPP profile when UPnP is disabled globally. Make sure UPnP is set to 'no' or 'default' under PPP profile (make sure you edit profile you're actively using)
by eider
Tue Aug 28, 2018 3:54 pm
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 88868

Re: Winbox vulnerability: please upgrade

keep in mind that it's a PHP which gets executed on web server. It could well be that the point of that script on server is to receive data about owned router and after it processes the data (the most important is router's public IP address), it just returns empty page of type text/plain Yes. Monit...
by eider
Mon Aug 27, 2018 9:18 am
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 88868

Re: Winbox vulnerability: please upgrade

To add to what @normis said - I've observed the same attack with SOCKS also attempting to send mass spam via port 25 (and only port 25) using From field in form of [random username]@[domain name from revdns]. The attack also added script and scheduler to run the script. Script was pointing at /mikro...
by eider
Wed Aug 22, 2018 4:46 pm
Forum: Beginner Basics
Topic: Blocking .io domains
Replies: 13
Views: 1368

Re: Blocking .io domains

However, your script is syntactically incorrect and results in a full reject on both chains due to missing line continuation marks. Please review or remove to prevent other user's from simply copying and pasting malfunctioning code. Fixed. Thanks. Additionally I do agree with others in here, that b...
by eider
Wed Aug 22, 2018 11:54 am
Forum: Beginner Basics
Topic: Blocking .io domains
Replies: 13
Views: 1368

Re: Blocking .io domains

This will block DNS requests to .io, both on output chain (from router, if router is serving DNS requests) and forward chain (in case user changes his DNS server to something else or router is not serving DNS requests). Block is done using reject so that resolver does not have to keep waiting for ti...
by eider
Thu Nov 30, 2017 10:17 pm
Forum: Beginner Basics
Topic: RouterBoard RB952Ui-5ac2nD IPSec phase 2 problem, help me!
Replies: 3
Views: 626

Re: RouterBoard RB952Ui-5ac2nD IPSec phase 2 problem, help me!

You need to check what algo are supported on client device and select correct options. As it stands now client actively responds that it is not able to utilize any of algo presented by server in proposal (by sending no-proposal-chosen - at this point server removes phase1 and assumes client disconne...