Community discussions

MUM Europe 2020

Search found 14 matches

by jlpedrosa
Mon Feb 19, 2018 2:22 am
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 314
Views: 62098

Re: Usage GPON module SFP in Spain

Hi To configure the Zisa, you need to plug the fiber in, plug the sfp into the router. When it comes online you need to configure an ip into that router sfp leg, of the range 192.168.1.0/24 except .1 which is the IP of the sfp. then FROM the router, you can connect to 192.168.1.1 with telnet and use...
by jlpedrosa
Tue Jan 02, 2018 8:06 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

Hi In this case denying IGMP is crucial due to movistar implementation. Once you sent the memebership report, they will stop sending the routes to my interface, which make the routes expire and never work again. By deniying the outbound traffic, the rip engine does not realize it has not reached the...
by jlpedrosa
Fri Dec 29, 2017 11:46 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

I managed to get it working, but had to do a workaround.

Add route 0.0.0.0/0 so it listens to the mcast ip.
Deny all IGMP traffic outgoing from that interface (so the other end does not sees me and stops sending packets)

Regards!
by jlpedrosa
Fri Dec 29, 2017 6:29 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

Hi Well, this is how the ISP sets it up for Spain ;). For voice VLAN they assign the IP via DHCP, and then they publish the routes via RIPv2 to their sip server (which has been advertised via the DHCP option). But I am afraid you were not accurate in one point, the router does not accept the package...
by jlpedrosa
Fri Dec 29, 2017 1:57 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

Hi Thank you very much for the detailed explanation. Indeed I manually added the network of the vlan where the packets are being recived to the rip networks and it started working. In this(my) setup there´s an extra layer of complexity, the ip address of that interface (and the network), is obtained...
by jlpedrosa
Thu Dec 28, 2017 2:45 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

Hi

Thanks, but I´m afraid those are the routes that would get sent to your rip neighbours. I´ve already tried to add the remote router as a known neighbour, but no luck neither, ignores the routes receives.

Anyone? If not, should I open a bug or something?
by jlpedrosa
Thu Dec 28, 2017 1:00 am
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

Hi

Not an expert in dynamic routing, but, active means it will actively query the neighbors configured by requesting routes, instead of listening only. I activated it and saw for the first time requests being sent by the router.

Anyone knows why the router in not learning the RIP routes?

JL
by jlpedrosa
Wed Dec 27, 2017 11:17 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

Hi
Thanks, but that is the case, the interface receiving the RIP is has address:
IP:10.29.42.2/19
Network: 10.29.32.0

The source of the RIP packages is:
Internet Protocol Version 4, Src: 10.29.32.1, Dst: 224.0.0.9

So the first ip of the range. Any reason why this should not be working?
by jlpedrosa
Wed Dec 27, 2017 5:41 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

Re: RIP routers without next hop

Hi

Thanks for the answer, then I'd like to know why the router is not "learning/installing" the routes provided? I see that at IP level, the src addres is correct address for the router and the dst address is the multicast group for RIPv2 224.0.0.9.

Thanks in advance
by jlpedrosa
Tue Dec 26, 2017 2:02 pm
Forum: Forwarding Protocols
Topic: RIP routers without next hop
Replies: 20
Views: 1604

RIP routers without next hop

Hi! I´m configuring a mikrotik router to receive the routes for VoIP using RIP. This is how they configure their routers they deliver to subscribers.I set it up in v2 passive, as they do, on the interface for that service, and I see that I receive the RIP routes correctly, but they are not being add...
by jlpedrosa
Sat Dec 23, 2017 6:00 am
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 314
Views: 62098

Re: Usage GPON module SFP in Spain

Hi I think you're almost there, I think now you need to create the vlan in the interface (6 for data) and enable dhcp client to get your pub IP and def route. Could you please post the exact steps you followed to get to that state? What values (and how do they look like) for movistar? Also: I can on...
by jlpedrosa
Fri Dec 22, 2017 11:35 pm
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 314
Views: 62098

Re: Usage GPON module SFP in Spain

Hi Guys I got a SFP from Zisa, but after pluging it to the router, I don't have a clue how to access the SFP, I've tried telnet from the mikrotik itself or from a lan conencted to the mikrotic, but no signal from ip 192.168.1.1, I've also tried to asign that ip range to the interface, but no luck. C...
by jlpedrosa
Thu Dec 14, 2017 1:31 pm
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 314
Views: 62098

Re: Usage GPON module SFP in Spain

For orange spain they even check the Software versions, and they must match the ones they have registered in the OLT, so we need a GPON SFP that is able to do so. They guy in this forum that manged to do it with the chinse SFP had to re write the firmware manually to cheat the versions. Do you know ...
by jlpedrosa
Wed Dec 13, 2017 3:14 pm
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 314
Views: 62098

Re: Usage GPON module SFP in Spain

Hi I´m also interested in this thread A LOT. I´m going to have 1Gb simetric, and I´ll need a good router with ipsec. If Mikrotic would have support to configure all the gpon settings required would be an excellent option. Any update on the firmware? I´ve seen in other threads that the software versi...