Community discussions

Search found 9 matches

by caspernetherlands
Wed Jul 10, 2019 7:26 pm
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

I finally found where the problem was and fixed it! For those of you who are interested on knowing where the problem was, here you go. The problem was that the interface that is connected directly to the firewall, who is participant on the bridge-wan, did NOT have an IP address assigned to it. The o...
by caspernetherlands
Wed May 08, 2019 9:57 pm
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

I am going to try to bridge two different ports. Maybe this combo port is causing issues? That's the only thing I still haven't tried. The only difference I have noticed between these mikrotiks is that on the mikrotik that everything works fine, the bridge-wan shows all its participant ports as desi...
by caspernetherlands
Wed May 08, 2019 5:48 pm
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

Thanks guys! I've honestly tried everything above mentioned, putting the IP address on the bridge-wan as opposed to the combo port, and I've tried to use the IP firewall on the bridge settings too. Also those three firewall rules is just me testing by the time I exported the config. Either way, with...
by caspernetherlands
Tue May 07, 2019 9:42 pm
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

I have attached a simple diagram how our networks are connected. The idea is that the eth1 (firewall) and the SPF are in bridge so that we can sort out and prioritize the VoIP traffic from the traffic that's coming from the firewall - where all users are behind and the traffic that gets generated it...
by caspernetherlands
Sat May 04, 2019 4:17 am
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

Interesting, I kind of thought they didn't. and I suppose the attribute "ports" won't work either?

I honestly lost on what should I do at this point.
by caspernetherlands
Fri May 03, 2019 4:06 am
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

Yes sir, that's what I am actually struggling with. I am doing everything I can to send a copy of the packet to the CPU. Mikrotik wifi recommends to run this command, /interface ethernet switch rule add copy-to-cpu=yes dst-mac-address=4C:5E:0C:4D:12:4B/FF:FF:FF:FF:FF:FF ports=ether1 switch=switch1 T...
by caspernetherlands
Thu May 02, 2019 6:25 am
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

# may/01/2019 22:13:31 by RouterOS 6.44.3 # software id = Q4VP-P7RQ # # model = CCR1009-7G-1C-1S+ # serial number = 6F53040122100 /interface bridge add fast-forward=no name=bridge-fw-management add fast-forward=no name=bridge-lan add comment=voip+paloalto fast-forward=no name=bridge-wan /interface ...
by caspernetherlands
Wed May 01, 2019 7:57 pm
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Re: Bridge interface not showing traffic [SOLVED]

Sorry just catching up with this post. I surely can. Note here that I have the same router and configuration at another site and I don't have this issue.

But let me DM the config to you.
by caspernetherlands
Mon Apr 08, 2019 7:17 pm
Forum: Beginner Basics
Topic: Bridge interface not showing traffic [SOLVED]
Replies: 18
Views: 1200

Bridge interface not showing traffic [SOLVED]

Hi there, I am having this bridge issue on one of the CCR1009-7G-1C-1S+ for a long time now and I can't figure it out. I have created a WAN interface bridge where I have added the SFP+ETH0 combo (uplink from ISP) and ETH1, where my firewall is connected to. All of my users are behind the firewall --...