3. Replace C1442 / C1443 capacitors on the main board with higher capacitance and voltage rating capacitors, 16V / 1000uf (Original 6.3V / 680uf) This one takes me a while, after removing capacitors from the PCB copper hole, the solder stuck in the hole, i need to drill it out... No need to fight w...

at v7.15b8, in dhcpv6 server before interm update interface disappear somehow, dhcpv6.png and since dynamic rule can't removed, user can't login again because of could not add dhcpv6 server with pool : server with such name already exists (7) @strods can you update vendor dictionary with new radius ...

According to changelog intel drivers updated.

*) x86 - ixgbe updated driver to 5.19.6 version;

Be sure card firmware up-to-date also.

All fine. Trust resource cpu usage. Profile give you only a hint about which service consume more resources.
Hard to talk between CHR and CCR without see a workload. Actually it's not ideal to compare tile and x86 processor either. I assume they are fine.

Transferring licenses between accounts not possible. Maybe mikrotik staff help over support, don't know. Otherwise open a new account, buy a single license and give credentials to your friend for use.

Seems it can be related with v7 because i have few instances at v6 and no expire error on them, all fine. But one CHR v7 with P1 showing same error.
Can you check license deadline?

I updated a CHR on AWS from 7.11.2 to 7.12 and it is not starting anymore, is there a known issue? Even the serial console isn't showing anything, it looks like the whole instance is broken. Upgrade v7.12 on vultr and no problem so far. Local instances of CHR and x86 upgraded and working fine also.

Enable this setting and try but use it with precautions.
https://wiki.mikrotik.com/wiki/Manual:PoE-Out

Put decimal to hex function as well to reduce confusion. Decimal 127 output must be 7F not 313237.

Hi,
Working PoE in input voltage for this device is 10 to 28 V. Either you have cable problem or new power supply has a problem and can't provide enough power/amp which is normally can do it easily.

Not even the serial console shows any output.

Beside os downgrade, wondering why bootloder do not respond. Can't you trigger backup bootloader with long pressing reset button while powering?

My bad. I didn't think that you are using pear.
Follow https://github.com/pear2/Net_RouterOS

Probably you are using routeros_api.class.php and updated while ago.
Take a look at https://github.com/BenMenking/routeros- ... .class.php
It's backward routeros compatible.

Used both at ESXI and didn't notice any performance issue so far. But can't promise future releases.
If you follow x86 path, few things you have to consider like pick proper disk size for operating system.
After licensing you can't expand operating system disk size. Otherwise you will loose license.

CHR need license renewal periodically. Don't know your environment but you can do it behind nat and allow something like license.mikrotik.com if you concern security. Beside that both x86 and chr were same as an os but chr contains virtual machine client tools, license transferable to another chr if...

Seems backup bootloader is 6.x and os 7.x so bootloader don't know how to load kernel and keep failing.
Can you try to install router os 6.x or reset bootloader to load main one...

Apply plenty waterproof tape on it and you're good to go.

Only disk size changing trigger CHR to change system id so you lost active license. Beside good idea to put notification at least if system id changed.

At winbox window clear cache before connecting and try again.

Some older models have two power input option but only one of it used (it can be identified with label but can't remember which ones right now). You have to open CCR to check it. If it's there you are good to go with another external 24V brick. Otherwise you have to put some diodes (probably 2 bridg...

Seems your 1072 has memory problem. Press any key within 2 seconds after power on and look for memory test at menu. Some friends reported some bad board capacitors can act same but before close inspection better to do test first.

Didn't notice anything wrong about uptime. Can you check hyper-v log for is vm restarted somehow mentioned time ago?
Form my side seems vm restarted and turned back again between your 2 ping interval.

First RouterOS customized operating system and don't have wide range driver inside. Second as far as i know RBM33G M2 slot belongs to M2 SSD's for expand storage nothing else. Third don't know what you are trying to do but RBM33G has enough eth connection on it maybe you should consider to put somet...

You aren't doing anything wrong. Probably when you hit stop or restart isp manager notify routeros and do it graceful reboot/shutdown. No matter what i did, container permission given only when i force vm to stop like power off and on like hardware. That's why i ask if you see that error/information...

When you do any option, are you see "router was rebooted without proper shutdown" error at first line at log when routeros come back?

after issue command;
/system/device-mode/update container=yes

do not shutdown or reboot at routeros. power off vm directly.