Community discussions

Search found 117 matches

by frank333
Mon Jun 10, 2019 10:30 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

here, I'll send you my files, enter the right interface names, and delete the previous script environment.
PS: remember to bypass the fasttrack ,therefore the script does not work
by frank333
Sun Jun 09, 2019 6:05 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

rayohms, I also have problems in automatically starting the script; but I restart it manually every time I restart the router. In about six months I've restarted it twice. Can you at least start it manually?
by frank333
Tue Nov 13, 2018 8:33 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

if I don't run the script manually, the ACC script is not executed ; even if the sheduler counter marks the activation every 15 seconds.
Does not vary the the max limit in short, in queue list.
by frank333
Tue Nov 13, 2018 8:24 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

if I run the script from the terminal ( /system script run ACC ) after I turn on the router, works everything.
I hope I made myself clear, so tell me what I can do.
by frank333
Tue Nov 13, 2018 12:48 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

hi,
  • Yes, the counter is activated every 15 seconds.
  • If I run the script from terminal it works.
test.txt
by frank333
Fri Nov 09, 2018 4:03 pm
Forum: General
Topic: Efficient queue management with three classes
Replies: 1
Views: 308

Efficient queue management with three classes

the sebastia user uses an effective queue system, which consists of 3 simple classes ; here's what he writes: I got 3 classes: "20", "30" & "FT" for bulk / rest. The last one is where FastTrack is defaulting to. For classification I'm not using the QOS/DSCP classes (64 possible classifications), but...
by frank333
Fri Nov 09, 2018 3:50 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

systemscheduler.txt.rsc
I tried, but the schedule's not working. :(
I think it could be a different management of variables.
I open a new post for queue management viewtopic.php?f=2&t=141410
by frank333
Thu Nov 08, 2018 6:16 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

I put start type at 00:00:00 (I'd tried that before, but it didn't work.); * also make sure that the actual functions are loaded before that -> so start-time=startup & interval=0 but here I do not know how to do . tonight I try to restart the router. you on your router have a very simple dscp you wa...
by frank333
Thu Nov 08, 2018 11:08 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

Schermata del 2018-11-08 10.07.10.png hi, the script no longer starts when I restart the router, I solved partially, manually starting the script is a bit uncomfortable but it works. I wanted to ask you then how you did to set only 3 queues in the dscp because I can no longer find your explanation ...
by frank333
Wed Nov 07, 2018 8:13 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

sebastia, I updated to version v6.43.4 and your script doesn't work anymore, mysteries! What could have happened?
by frank333
Sun Nov 04, 2018 7:15 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

hello frankcale, if it's something simple I can answer you, what's your problem?
by frank333
Tue Jul 24, 2018 12:06 am
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

yes wireless ISP , so I have to resign myself and leave things as they are. :(
by frank333
Mon Jul 23, 2018 10:55 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

for example now (21.54 ETC) is starting to go wrong the line with very high latency, if I lower the max-limit on the uplink everything works wonderful. Weird?
by frank333
Mon Jul 23, 2018 10:28 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

Btest :mrgreen: , the script I've attached works well for the dowlink but for the uplink (ppoe gwLTE) I've already tried to modify it without results and I think I'd solve all the problems since I'm testing the pcc and it seems to work well when the connection is stable at 30/3.
by frank333
Mon Jul 23, 2018 9:03 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

I can't get what is ACC, and I don't know what bufferbloat are you talking about. https://www.gargoyle-router.com/wiki/doku.php?id=qos&s[]=acc comma 5 Do you mean a bufferboat problem related to WAN->LAN VoIP traffic or a bufferbloat problem related to the other WAN->LAN traffic? WAN->LAN traffic A...
by frank333
Mon Jul 23, 2018 7:36 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

sindy is a brilliant idea, but I wouldn't solve the problem of the bufferbloat that with this system of ACC+DSCP allows me to have very low latency inside the LAN.
by frank333
Sun Jul 22, 2018 11:50 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

I always thought that the 'Tik' bandwidth test took precedence over all LAN traffic. :(
But anyway it's obvious I think, that when I have 3 Mbps instead of 30 and very little traffic in lan, the wisp is reducing the bandwidth
by frank333
Sun Jul 22, 2018 10:54 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

i.e. throttling of the throttlable traffic 200 kbit/s below the currently available downlink bandwidth and keeping that margin for real time traffic. I have never been able to understand how to do this without using a script, since the maximum bandwidth in uploads and downloads varies continuously ...
by frank333
Sun Jul 22, 2018 10:15 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

....So if your downlink bandwidth is 30 Mbit/s as you say, and you want to support two phone calls simultaneously, you have to leave a margin of at least 200 kbit/s so the max-limit of the queue shaping the "throttlable" traffic in WAN->LAN direction must be 29.8 Mbit/s. here's just that that gives...
by frank333
Sun Jul 22, 2018 9:19 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

I had not thought it could be done, so if I understood correctly in my case I have a ATA cisco with these data: proxy 83.211.227.21 port rtp min/max 13456/16482 and a sip port 5061. I could with rules of mangle and queue tree always give the highest priority to the voip service? :shock:
by frank333
Sun Jul 22, 2018 4:47 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

....and that you should use other criteria to assign priority to packets received from the WANs
here are these words that make me curious... how could it be done? :idea: :idea:
by frank333
Sun Jul 22, 2018 3:50 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

most likely your ISPs are honest and offer a stable connection, here with me instead offer you a 30/3 connection, but these values are never respected and the latency is variable 8-50ms use the dscp is a must! So all I have to do is leave the gw.LTE as a backup connection with the failover only (whi...
by frank333
Sun Jul 22, 2018 2:18 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

ok sindy , but I have very high latencies inside the lan when there are heavy downloads and having the voip the only way I've seen use to solve the problem , is the one of dscp, that's why I use it. I agree with you that the simplest things are also the best! ps: now I've disabled the dspc I see how...
by frank333
Sun Jul 22, 2018 1:34 pm
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

the traffic from/to gatewayLTE and to the house2 arrives at the 'Tik on the eth10 interface, the eth10 is part of the bridge and the whole bridge has this qos rule:
queue treeprint.txt
separating to dscp management of the gwLTE from the rest of the bridge, is no small thing for me ...
by frank333
Sun Jul 22, 2018 11:39 am
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

Re: PCC between wan pppoe , static gateway on bridge; and dscp management

For me, the only argument why to keep the WAN 2 (lte gateway) in house 2 is redundancy, i.e. that house 2 would still have internet connection if the inter-house link (or mains power in house 1) goes down. In all other respects, such setup only brings complexity. By moving the LTE gateway to house ...
by frank333
Sun Jul 22, 2018 1:05 am
Forum: General
Topic: PCC between wan pppoe , static gateway on bridge; and dscp management
Replies: 28
Views: 1129

PCC between wan pppoe , static gateway on bridge; and dscp management

I have a pcc between wan pppoe and a static gateway on bridge and I have the dscp configured to adjust to the bridge interface.
I would like the dscp to handle the static gateway traffic separately(the dscp works but works badly).
Does anyone know how to do it or do they have any examples to propose?
by frank333
Sun Jul 22, 2018 12:01 am
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

...
by frank333
Sat Jul 21, 2018 11:58 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

...
by frank333
Sat Jul 21, 2018 5:16 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

/queue tree> print Flags: X - disabled, I - invalid 0 ;;; Uplink QoS name="QoS_pppoe-out1" parent=pppoe-out1 packet-mark="" limit-at=0 queue=wireless-default priority=8 max-limit=2900k burst-limit=0 burst-threshold=0 burst-time=0s bucket-size=0.1 ..... 9 XI ;;; Downlink QoS name="QoS_bridge" parent...
by frank333
Sat Jul 21, 2018 3:00 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

All the dscp-marking rules are in the postrouting chain, which means that they cannot affect the already chosen route for a packet any more, so I assume it is just a coincidence that it started working after you've disabled them and that you have changes something else in parallel. as soon as you r...
by frank333
Sat Jul 21, 2018 2:52 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

test.jpeg
maybe I understood the problem! I tried to turn off all the rules of dscp and the load balancing works finally. now however how can I do to keep the dscp?
by frank333
Sat Jul 21, 2018 2:33 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

you have also browsed the internet normally ; it seems that all traffic passes via WAN2 instead it happens from WAN1 I'll attach the firewall prints also I have this strange situation: when I do a speedtest with the ipad I have correct upload values (combined bandwidth) instead if I do the test wit...
by frank333
Sat Jul 21, 2018 1:32 am
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

> /ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; test_speedtest.net (server 88.149.202.248) chain=postrouting action=passthrough routing-mark=to_WAN1 protocol=tcp log=no log-prefix="" 1 chain=postrouting action=passthrough routing-mark=to_WAN2 protocol=tcp log=no log-...
by frank333
Fri Jul 20, 2018 11:44 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

I did the count for the test on speedtest.net, I hope I wrote the right rules for mangle, it seems that much of the traffic passes on WAN2 (????) and yet is also committed WAN1 as for the download seems to me that there is some problem, for the upload instead I see that the band is summed up correct...
by frank333
Fri Jul 20, 2018 7:32 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

I managed to understand that in the address-list I have to insert the ip of the server speedtest that I use for the test 88.149.202.248 in my case, moreover since I have a gateway connected directly in lan I modified the rule of mangle so tell me if it seems correct to you : add chain=postrouting ac...
by frank333
Fri Jul 20, 2018 5:06 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

I entered the in address-list there ip computer from which launch speedtest.net I inserted the rule: /ip firewall mangle print where chain=postrouting dynamic=no comment=test_wireshark but the 'Tik does not accept the others instead are accepted /ip firewall address-list add list=speedtest address=1...
by frank333
Fri Jul 20, 2018 3:53 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

hi sindy ; thanks for your patience,
yes the traffic works on both WAN
I'm trying to do the test you suggested above but it's something new to me and I have to study it a bit...
The rule that was changed during the upgrade is intact and the configuration is the same.
by frank333
Fri Jul 20, 2018 3:36 pm
Forum: General
Topic: PCC upload speed issue
Replies: 30
Views: 2171

Re: PCC upload speed issue

also 'I, I have the same problem, thanks to sindy the pcc worked, then after a reboot measuring with speedtest.net the bandwidth in both download and upload no longer add up.
I'm trying to do the test with wireshark.
Someone has a suggestion to give me ?
by frank333
Mon Jul 09, 2018 12:16 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

For sebastia, or who knows how to do : I updated last night to version 6.42.5 and now the script $applyACC target=8.8.8.8 intfP=ether1 minRt=120 maxRt=190 intfQ=ether5 in the schedule no longer starts at the restart of the router even if half Start Time in startup . I read in the manual about the $a...
by frank333
Sun Jul 08, 2018 6:13 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

sindy, still immense gratitude, for all you have done for me!tnx!
by frank333
Sun Jul 08, 2018 5:18 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

The first src-nat rule in the list above (the one with src-address=192.168.8.0/24 ) seems unnecessary to me I eliminated src-address=192.168.8.0/24 it at least remains as a summary , for those in the future looking for help . One last thing, turning off the PCC, how could I do to automatically attr...
by frank333
Sun Jul 08, 2018 4:39 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

Summing up all the changes at the end I did this (what do you see wrong?) /ip firewall filter add chain=forward action=fasttrack-connection connection-state=established,related connection-mark=!WAN2_conn log=no log-prefix="" comment="defconf: fasttrack" add chain=forward action=accept in-interface=b...
by frank333
Sun Jul 08, 2018 3:52 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

the configuration is the same as post #51 with only the last addition in ip firewall nat
by frank333
Sun Jul 08, 2018 3:27 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

access to the LTE gateway is working, Load balancing works, (at least it seems to me...) known traffic on the interface coming from the LTE gateway and the pppoe gateway. Using icanhazip.com I sometimes have ip from WISP1 and some from WISP2 . If I do a speed test I have values higher than those I ...
by frank333
Sun Jul 08, 2018 2:28 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

yeahhhh works works ,wonderfu! You are a great sindy! I left the old rule that before allowed me access to the LTE gateway /ip firewall nat print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; defconf: masquerade chain=srcnat action=masquerade out-interface-list=WAN ipsec-policy=out,none 1 chai...
by frank333
Sun Jul 08, 2018 1:54 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

ip firewall filter print.txt
firewall filter print stats.txt
ip firewall mangle print.txt
ip firewall mangle print stats.txt
ip firewall nat print.txt
do not navigate
by frank333
Sun Jul 08, 2018 12:30 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

navigate on some sites and not on others, the LTE gateway is no longer visible
ip route rule print.txt
ip firewall mangle print.txt
by frank333
Sun Jul 08, 2018 11:33 am
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

with the above changes I can navigate, but seems to ignore the LTE gateway, also I can no longer ping on 192.168.8.1
by frank333
Sun Jul 08, 2018 11:14 am
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

/ip firewall mangle add chain=input in-interface=pppoe-out1 connection-mark=no-mark action=mark-connection new-connection-mark=WAN1_conn comment="PCC for LTE" add chain=input in-interface=bridge src-address=!10.0.0.0/24 connection-mark=no-mark action=mark-connection new-connection-mark=WAN2_conn add...
by frank333
Sun Jul 08, 2018 10:47 am
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

Hello sindy and good morning, I upgraded to 6.42.5, the automatic update worked without any problems. But there is a novelty now, I can no longer connect from a computer in the LAN to the LTE gateway (192.168.8.1). In the night I read back all the posts and checked to have written everything correct...
by frank333
Sat Jul 07, 2018 11:04 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I reset the counters , just that there is other traffic on the lan (ipad smartphone TV ) that I can not turn off .
Tonight I upgrade to version 6.42.5 then , let's try again tomorrow if you are not bored.
by frank333
Sat Jul 07, 2018 10:27 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

ip firewall mangle print stats.txt
ip firewall mangle print.txt
ip firewall filter print stats.txt
ip firewall filter print.txt
we continue tomorrow or another day if you want, it was not my intention to engage you so much!
However, I can still do it, :lol:
by frank333
Sat Jul 07, 2018 9:37 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I kept the default routes active and tried WAN1_conn and WAN2_conn , but it still doesn't work.
I have firefox on a computer with ubuntu and I have disabled web page caching, is connected in on the eth2 interface bridge
by frank333
Sat Jul 07, 2018 9:04 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

Schermata del 2018-07-07 19.53.19.png
the two methods with wan1-conn and wan2-conn do not work
by frank333
Sat Jul 07, 2018 8:29 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

then replacing the WAN2_conn field in all PCC rules; is it correct to do so? /ip firewall mangle add chain=input in-interface=pppoe-out1 connection-mark=no-mark action=mark-connection new-connection-mark=WAN1_conn add chain=input in-interface=bridge src-address=!10.0.0.0/24 connection-mark=no-mark a...
by frank333
Sat Jul 07, 2018 7:42 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I don't know how to do it; excuse me but I don't have much experience :( :(
by frank333
Sat Jul 07, 2018 5:36 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I hope I have fully understood what needs to be done.
I activated the marked conections one at a time:
wan1 mangle.png
wan1 iproules .png

forWAN2:
wan2 iproules.png
wan2 mangle.png
does not work in both cases
by frank333
Sat Jul 07, 2018 4:48 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

sorry sindy,
I do not use anything ! I tried the /ip route rule above but it does not work .
Now I try with the pcc rules enabling one connection at a time
by frank333
Sat Jul 07, 2018 4:29 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I tried again to insert 10.0.0.0/24 and the LAN seems to work
Schermata del 2018-07-07 15.25.12.png
then I try the additional instructions you gave me even if I didn't understand exactly how to do it; in /ip mangle firewall I have to disable them all leaving the first two active?
by frank333
Sat Jul 07, 2018 3:54 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

If you modify that /ip route rule to deal with dst-address=10.0.0.0/24 and enable the two routes with routing-marks again, does it work or not?
no does not work.
by frank333
Sat Jul 07, 2018 2:17 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

sindy, as soon as I enter the /ip route rules the lan freezes. /ip route add dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_WAN1 check-gateway=ping add dst-address=0.0.0.0/0 gateway=192.168.8.1 routing-mark=to_WAN2 check-gateway=ping Schermata del 2018-07-07 13.06.13.png alli, you must src...
by frank333
Sat Jul 07, 2018 10:18 am
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

This morning I was convinced I could finally get the load balancing instead as soon as I add the rules below the lan freezes. I thought that having a gateway on the bridge, it was enough to replace in-interface=ether5 with src-address=192.168.8.1 instead the issue is more complex. /ip firewall mangl...
by frank333
Sat Jul 07, 2018 12:55 am
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

Please add in-interface=bridge to the rule action=accept chain=forward comment="accetta pacchetti che usano LTE come gateway" out-interface=bridge to improve security. Your setup is so unusual that I haven't realized immediately that this condition should be there. It's not a big deal that it was m...
by frank333
Sat Jul 07, 2018 12:24 am
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

failover also works perfectly, now I try to rewrite the CPP rules but I think and hope not to find problems now the most complex stage is over.
by frank333
Sat Jul 07, 2018 12:08 am
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

sindy you are a great wizard!!!! it works wonderfully! I would never have arrived without your help. thanks again!! :D :D :D :D
by frank333
Fri Jul 06, 2018 6:54 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

  • In the laptop (win7) of house 2 I configured the gateways statically: 192.168.8.1 (LTE) with metric 1 and the LAN gateway 10.0.0.1(RB3011) with metric 2 to connect to the rest of the LAN.
  • for failover I try to use the PPPOE gateway IP provided by the isp
  • I'll attach the router configuration
by frank333
Fri Jul 06, 2018 5:44 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I tried the changes but can't get them to work at this point I'd be happy with a simple failover. Now my LAN is configured as originally without any PCC rules has a pppoe gateway, and a dhcp server managed by the RB3011 . In the second house there is always the gateway with only the static ip and th...
by frank333
Fri Jul 06, 2018 3:32 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

thanks sindy ,
now I try to make the changes that you have recommended .
I'll post the results in a while (if it doesn't stop everything...) don't let me down, you're my lifeline :-)
by frank333
Fri Jul 06, 2018 2:54 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

Sorry, I've missed that. So actually the only interface of the router in house 1 which hosts the 192.168.8.0/24 subnet is ether5 , and when you connect a laptop to that router, the laptop gets its IP address from some other subnet associated to bridge , right? And when the laptop is connected in ho...
by frank333
Fri Jul 06, 2018 2:19 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

You have provided only configuration from one of the houses plus I don't understand the remark I take advantage of the two gateways by configuring the routes directly on the laptop So in general, you have to configure both houses' routers the same way as described here . The critical point is to av...
by frank333
Fri Jul 06, 2018 12:42 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

Re: How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I did as the manual says, but maybe I am wrong: #pppoe-out1 on eth1 #ether5 interface connected wifi to house2 (I can ping on the gateway 192.168.8.1) #bridge all interface rb3011 /ip address add address=10.0.0.0/24 network=10.0.0.0 broadcast=10.0.0.1 interface=bridge add address=192.168.8.2/24 netw...
by frank333
Thu Jul 05, 2018 8:37 pm
Forum: General
Topic: How can you load-balance between a pppoe gateway and a static gateway on the bridge?
Replies: 62
Views: 2966

How can you load-balance between a pppoe gateway and a static gateway on the bridge?

I would like to make load balacing between the pppoe gateway on the rb3011 and a LTE gateway with static ip that resides on a trunk of the lan connected in wifi . Someone can explain to me if you can do it. Currently in the second house I take advantage of the two gateways by configuring the routes ...
by frank333
Fri Apr 27, 2018 6:20 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45523

Re: v6.42.1 [current]

Default route distance should be 1 or more. It used to be 0 and upgrade magic doesn't fix it. I changed from 0 to 1 the value and it seems to work. the manual indicates distance :0 connection 1 static address . (I have no static but dynamic address though??) No, the manual says: 0 - Connected " Rou...
by frank333
Fri Apr 27, 2018 5:11 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45523

Re: v6.42.1 [current]

Default route distance should be 1 or more. It used to be 0 and upgrade magic doesn't fix it.
I changed from 0 to 1 the value and it seems to work. the manual indicates distance :0 connection 1 static address . (I have no static but dynamic address though??)
by frank333
Fri Apr 27, 2018 1:17 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45523

Re: v6.42.1 [current]

I switched from 6.42 version to 6.42.1 I have a wisp pppoe connection I have this error Schermata del 2018-04-27 11.37.55.png . Default Route Distance 0, should mean route type 0, connected,then the value should be corrected. Because instead it is highlighted in red as error or missing? Somebody kno...
by frank333
Sat Apr 21, 2018 5:20 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 105655

Re: Blacklist Filter update script

dear dave, sorry you want to close the server, I ask you just this, sets a monthly price fair, and post it qua payment via paypal or bitcoin, if the initiative is not successful then you will decide whether to close or not, what do you say?
Your script I need a lot is a shame to lose it!!
frank.
by frank333
Fri Apr 20, 2018 4:50 pm
Forum: Announcements
Topic: v6.42 [current]
Replies: 147
Views: 28058

Re: v6.42 [current]

installed now 6.42,works fine on rb3011.
by frank333
Thu Feb 08, 2018 12:33 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

Percentage of what? I meant to say that, instead of entering the max limit value you could assume a fixed value in percentage (e. g. 10%) or at choice. Of course, ROS should read the bandwidth instantly or after a set time. Again, percentage of what? Interface speed? Some queues are not related to ...
by frank333
Thu Feb 08, 2018 11:36 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

Percentage of what?
I meant to say that, instead of entering the max limit value you could assume a fixed value in percentage or at choice.
Of course, ROS should read the bandwidth instantly or after a set time.
(e. g. 10% bandwidth istantly / 1.10=max-limit)
by frank333
Thu Feb 08, 2018 1:11 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

Tip for developers, so that you do not enter the possibility of a percentage value instead of max-limits in the queue tree?
by frank333
Wed Feb 07, 2018 11:31 pm
Forum: Beginner Basics
Topic: Redirecting web traffic from Mikrotik to internal Squid using policy based routing
Replies: 2
Views: 333

Re: Redirecting web traffic from Mikrotik to internal Squid using policy based routing

Hello all, There is a beginner's guide on how to set up transparent interception of HTTP and HTTPS traffic in the network with help of external Squid proxy, Mikrotik router and Policy Based Routing. The tutorial is available at https://docs.diladele.com/tutorials/mikrotik_transparent_squid/index.ht...
by frank333
Tue Feb 06, 2018 12:59 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

in Bandwidth_Test you might have a box to save the ip of test servers without recompile it all the time?
by frank333
Mon Feb 05, 2018 6:37 pm
Forum: General
Topic: Bufferbloat
Replies: 1
Views: 1753

Re: Bufferbloat

Someone knows how to indicate a script, which mitigate the bufferbloat; I searched the forum for several hours but I found little information. On this site https://infogalactic.com/info/Bufferbloat they recommend using the mtr command with a simple script. Ros has the mtr command but it's the script...
by frank333
Tue Jan 30, 2018 10:33 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

So what to adjust?
The problem is that my isp, does not keep the upload level constant at 3M sometimes drops to 1M.
The queue-tree rule in upload therefore does not work.
The problem should be called bufferbloat (I've also opened a post but no one answers...).
by frank333
Tue Jan 30, 2018 9:53 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

Lol, nice try though ;). Nice graph I tried to copy your script and adapt it to the upload but it doesn't work at all. So in order to avoid the bufferbloat I have lowered the max limit of the queue to 1M but the connection works badly. Do you have any ideas about how to do it? PS: I'm looking to ma...
by frank333
Mon Jan 29, 2018 5:16 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

  • ROS7 will be ready in a year I think.
I think the same. For the last few years :)
Is it like saying that there is no hope?
And yet ARM devices are very good in my opinion;would be a real shame.
by frank333
Sun Jan 28, 2018 12:44 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

From the Codel Wiki: CoDel - in order to run well at line rate - requires the Linux 3.3 Byte Queue Limits . It has proven too hard to backport BQL to Linux 3.2 or earlier (an attempt for 3.2 exists, but no driver support), so you will need to upgrade to Linux 3.5 or later, and have a driver that su...
by frank333
Sat Jan 27, 2018 11:30 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97119

Re: v6.42rc [release candidate] is released!

implementing a new type of queue such cake or fq_codel would be a great addition, what do you think?
Metarouter for arm?
by frank333
Sat Jan 27, 2018 3:46 pm
Forum: General
Topic: Bufferbloat
Replies: 1
Views: 1753

Bufferbloat

I have an asymmetrical poor connection 30/3, the ISP lowers uploads randomly(I hope only when there is so much traffic). So in upload above all I have variable speeds from 1M to 3M . Every qos rule therefore no longer works correctly. How it can be done for change the Qos thresholds dynamically? Is ...
by frank333
Mon Jan 22, 2018 11:33 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 105655

Re: Blacklist Filter update script

Then, what I'm doing wrong? Can smb help me out. Thank you. Jacka, eliminates old variables in the environment 1.png eliminates all blacklists scripts and scheduler reboot router rewrites the launch script 3.png starts the blacklistUpdate script --->run script Must work, it controls ip-->firewall--...
by frank333
Mon Jan 22, 2018 12:02 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 105655

Re: Blacklist Filter update script

The script works very well! Thanks IntrusDave, you are a Wizard Master! :)
by frank333
Fri Jan 19, 2018 6:09 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

It was a trick, to let you examine the script as I don't understand where it crashes. :wink: I had tried 3 fast middle low classes but the videos were shot. Here's the 8.8.8.8 ping at 30 hours of my lan even when it's congested it stays always low finally!! Schermata del 2018-01-19 16.59.24.png
by frank333
Thu Jan 18, 2018 7:43 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

the ISP lowers uploads randomly, only when there is so much traffic.
Have you ever tried the mducharme script that I wrote on top of it, you can get it started?
by frank333
Thu Jan 18, 2018 6:36 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

Thanks sebastia! It WORKS wonderfully! (tested for 4 days) I had to use this script for the qos https://forum.mikrotik.com/viewtopic.php?t=113308 even if I had to run it in blocks (I don't know how to find the error in the original script I think of a syntax error but I can't correct it) P.S. Is it...
by frank333
Sun Jan 14, 2018 6:02 pm
Forum: Scripting
Topic: Script to monitor temperature
Replies: 11
Views: 3591

Re: Script to monitor temperature

Here in brazil temperatures can rise very quick in the summer, so i want to know if the A/C its ok!
works wonderfully!!
typical Brazilian temperature 40C° :-P :-P
Obrigado!
by frank333
Sun Jan 14, 2018 2:43 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

https://www.videosprout.com/video?id=eac7d795-7611-4db4-bf2d-ce4a1b471bb0 A flash in the pan! alternating moments of good ping and other bad times, how it can be seen from the video. :( I reduced the Max-Limit to 1M but still ignores it and downloads it to 3M as you can see from photos. Schermata d...
by frank333
Sun Jan 14, 2018 2:29 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

you have fasttrack activated but I thought I bypassed it using this rule in the firewall:
Firewall filter firewall filter add action=accept chain=forward comment="Bypass fasttrack for non-zero DSCP" connection-state=established, related dscp= 0!
Schermata del 2018-01-14 01.28.10.png
by frank333
Sun Jan 14, 2018 1:53 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

the test on queue 63 is correct 11 packs per 10 ping.

I've reduced the Max limit to 1800K but when I do the upload seems to ignore it and jumps to 3M.
by frank333
Sun Jan 14, 2018 12:50 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

ok I have understood, do the tests and put the video and the configuration modified.
by frank333
Sun Jan 14, 2018 12:32 am
Forum: Scripting
Topic: FastTrack-Friendly QoS Script
Replies: 45
Views: 13732

Re: FastTrack-Friendly QoS Script

Hi all, Here is my FastTrack-friendly QoS script, based on one made by IntrusDave. It supports IPv4 and IPv6, and uses DSCP markings to match packets. It is fasttrack-friendly, but does not require fasttrack............... I tried to run the script with ROS 6.41 but didn't start. I tried to run onl...
by frank333
Sat Jan 13, 2018 12:13 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

I also checked queue 63 and there is traffic. fasttrack bypassed with this /ip firewall filter add action=accept chain=forward comment="Bypass fasttrack for non-zero DSCP" connection-state=established,related dscp=!0 Are just a step away from the solution.... :lol: :lol: :lol: but the latency is al...
by frank333
Fri Jan 12, 2018 3:23 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

I deleted the variables with /system script environment> remove 0,1,2,3 and the script has finally started (v0.4 v0.5?) The script now works well in download (I downloaded a file using the whole bandwidth). In upload instead the latency is always on 100ms (also here I did upload at maximum speed to ...
by frank333
Thu Jan 11, 2018 12:26 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

Interesting ... may give this a look when I get time. pcunite, thank you for commenting, I also read your post on Qos, and it was of great help to me, I understood from your scripts some rules for compiling queue files especially in the management of HTB. Your explanations are very clear and simple...
by frank333
Wed Jan 10, 2018 9:47 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

As for downloading is concerned, your script works very well !! as you can see from the video the latency is always low. https://www.videosprout.com/mediaFile.jsp?id=5c8d16a2-4217-4ef9-a656-404cebae619b&cache=false&type=webm As for uploads, however, the latency is always very high as you can solve i...
by frank333
Wed Jan 10, 2018 6:05 pm
Forum: Scripting
Topic: DSCP mangle and queue trees
Replies: 8
Views: 6472

Re: DSCP mangle and queue trees

beautiful script intrusDave!!! it is correct to use the pppoe-out1 interface in wanInterfaceName when using a pppoeclient ? My ISP gives me a 30megabits download/3megabits upload connection ,it is correct to write 3000k in uploadBandwidth, or the value should be reduced by 10%? my conf # jan/09/2018...
by frank333
Tue Jan 09, 2018 12:14 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 77777

Re: v6.41 [current]

Hi, Chupaka, compared to the previous version 6.40.5.
I also have problems with PPPoE Client, every time the ISP changes ip I have to use the backup file, because the only reboot leaves the connection active but not working.
All I have to do is to downgrade to 6.40.5.
by frank333
Tue Jan 09, 2018 3:39 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

"I have a minRt of 28M and a maxRt of 31M and the script marks an error." -> what error do you get? https://i.imgur.com/Xc5z5W1.png "...limit rate moves down to reach the minRt..." -> if you try pinging the ping server from firewall what timeings do you get? Maybe you get RTT of >=50ms. -> what is t...
by frank333
Mon Jan 08, 2018 8:54 pm
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 77777

Re: v6.41 [current]

Simple queues do not work, or the way in which they are written has changed.
by frank333
Mon Jan 08, 2018 1:54 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

question for mikrotik administrators, you could insert this script in the next edition of ros, simplifying the procedure even noobs could use it, what do you think? :D
by frank333
Sun Jan 07, 2018 12:03 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

sebastia, thanks, I tried it but I have too many problems I list you, I don't know how to write the rules correctly in mangle firewall , I added them to the bottom of those that have 2 classes 20 and 30 but what chain I use, and the other parameters how should they be configured? In queue tre e I ad...
by frank333
Sat Jan 06, 2018 4:20 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

Throw in the towel. too complicated.

frank
by frank333
Sat Jan 06, 2018 2:26 am
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

sebastia, just bear with us ,are really noob :lol:
My ISP gives me a 30megabits download/3megabits upload connection

frank.
by frank333
Fri Jan 05, 2018 3:28 pm
Forum: Scripting
Topic: Script implementing Active Congestion Control
Replies: 62
Views: 7258

Re: Script implementing Active Congestion Control

sebastia, thank you for the script is just what I was looking for. I tried to launch it on rb3011 but it doesn't seem to start. 1)I ask you, can you paste an example of QoS on upload? (I use the dscp for the voip implemented with this script https://forum.mikrotik.com/viewtopic.php?f=9&t=110717) 2) ...
by frank333
Wed Jan 03, 2018 9:30 pm
Forum: General
Topic: Active Congestion Controller (ACC)
Replies: 5
Views: 723

Re: Active Congestion Controller (ACC)

I would be interested in the answer as well, as it applies to any dynamic bandwidth connection (ex: wireless, mobile data, ...). Basically how can the limits for QoS be adjusted so that, buffering doesn't occur? I don't know how to write the script to get ACC, but from what I read it seems like a p...
by frank333
Wed Jan 03, 2018 4:05 pm
Forum: General
Topic: Active Congestion Controller (ACC)
Replies: 5
Views: 723

Re: Active Congestion Controller (ACC)

hi p3rad0x, thank you for the answer, I had a router with gargoyle installed and the ACC system worked very well especially when the available bandwidth varied. It would be nice to write a script that does just as well since the mikrotik can be customized as you want. https://i.imgur.com/ELE3Fhp.png...
by frank333
Wed Jan 03, 2018 3:00 pm
Forum: General
Topic: Active Congestion Controller (ACC)
Replies: 5
Views: 723

Active Congestion Controller (ACC)

good morning to everyone. I have this problem my home connection has a variable download/upload band (sometimes 30M sometimes 2M) because I have a very bad ISP. When downloading large files the connection is congested, and on the whole LAN the latency increases a lot. Is there a way to configure the...