Thanks @tangent. To be specific I want to save power during night. The USB Wifi Dongle I am using can pass data both through wifi and USB connection. On RouteOS interface, it shows up as lte1. I've already disabled that as I don't use this USB data function. I purely use hex poe USB port for that do...
Hi, I'd like to power off my wifi dongle connecting to Hex Poe USB port during weekend. But seems like RouteOS lacks the capability to power off/on the USB port. What I can find is the USB power reset feature. Not sure what's the max seconds duration of the power reset can be set. If I put a large n...
Just an update. My ISP provided me an addon feature which is static IP address. Though the static IP is still delivered thru DHCP and needs renew every 4 hours. I haven't tried hardcode this IP to WAN interface manually cause I believe it needs to be registered on ISP's DHCP server for the traffic f...
My hex Poe upgrade from 6.45.6 to 6.45.7, the avg processor CPU increases to 5% from 2% before. Librenms snmp has a very clear graph. Edit: CPU became normal after 1 hour and 10 min. No idea what it was doing. Everything else looks normal at that time. No spike of traffic. Maybe recalculate address ...
Even if i request static ip address from ISP, the static ip is also delivered thru DHCP. No...! Ofcorse you can assign that static IP to an interface without the need of a dhcp client... Be sure of what you write before you tout it as gospel - this is DHCP but its mostly IPoE which is not your conv...
Remove the DHCP client from MikroTik and assign a static IP instead... as simple as that...! it's impossible to hard code a static public ip to WAN interface. once the DHCP lease expires, the ip will be recycled and assign to other users. Even if i request static ip address from ISP, the static ip ...
Can I confirm the spf interface down is caused by DHCP client not able to renew the lease in order to perform a DHCP full discover OR the spf interface speed negotiation issue that brings down the link then cause DHCP lose the IP? I just trying to understand whether it is a DHCP client issue or mayb...
I may expect Mikrotik will say that ISP DHCP server is not following RFC standard.
But check this thread. https://forums.whirlpool.net.au/archive/2654421
Issue seems get solved from various router vendor like ASUS, Cisco by upgrading firmware.
Anyone experienced similar issue? Thanks a lot.
I am using mikrotik hex poe on 6.45.6. WAN connects to Telstra NBN. It used to work perfectly on Telstra Cable. But seems like Telstra NBN using a different way doing DHCP server. Mikrotik DHCP client get dhcp release for 1 hour. In the middle of that hour if not get ACK, after dhcp lease timeout, t...
I spent the whole afternoon playing IGMP Proxy trying to figure out why HomeKit cannot connect on a different vlan.
Just realised routeros does not support this yet.
Any chance we can expect in v7?
On macos catalina using wine64 and automation start winbox64. Seems all normal. hex poe (v6.45.6). cpu is around 1~5%. But if i go to IP-FIREWALL-Address lists tab, CPU goes up to 54% immediately, then hopping between 25%-57% constantly. Only when i click other tabs, CPU returns normal. Anyone obser...
you can test port forwarding work or not by put a new system with the required port open. I experienced similar Plex Media Server Remote access flashing issue recently, and ends up with forgetting to allow the port on the Plex system itself (Synology DSM Firewall blocked it). RouterOS port forwardin...
Is it possible to increase the request timeout limit?
I use this app to connect to a remote router in different country. It always disconnected with timeout message when pulling 'big' data such as view Log / Address list etc.
Anyone noticed interface connectivity issue after upgrade? I have a remote HEX POE. No issue with the firmware upgrade. Rebooted twice and looks good. I can remote access the box via winbox without any issue. But after a third reboot, I noticed one interface to Synology NAS only has TX packet but ve...
I recently implemented the same for Sonos by using igmp-proxy not PIM. Just need to add the interfaces into igmp-proxy and set which one is upstream, then apply the firewall rules for allowing UPnP traffic. That's it. According to Mikrotik Wiki igmp proxy is slightly lightweight than PIM, that's why...
Would be great if the IP cloud can expand the feature to whole configuration, something like Cloud Winbox. User can login the cloud portal to modify and customize the configuration, when the router box connects to Internet, automatically grab updated cloud configuration and deploy it. Two beauties: ...
Hi, I have a remote hex poe. I tried to upgrade from 6.43 to 6.43.1. unfortunately, poor Internet speed, only download around 1MB file then timeout. But the upgrade process didn't do any check then reboot the box directly. Then it never back online again. What can I do next? Seems like a travel to t...
You can enable logging for the rules that you have created. Then you can see whether rules get hit.
You can also double check Dlink switch configuration. Maybe inter vlan traffic even not passing thru Mikrotik router.
Not really understand how you configure eth 6,7,8. Created multiple IP on the same interface as access port? That’s not trunk configuration on RouterOS I believe. Since you have Cisco wireless controller, you only need to configure WLC port to be trunk, all other AP port as access port. All the mult...
Agree with Jotne, besides the Mikrotik router, is there any other device connects to ISP, like modem or media converter?
Maybe that modem LAN interface does not support 1G.
Or bad cable. Or fault Mikrotik port. Have you tried different Mikrotik port to connect to WAN?
thank you florid, i am beginner in mikrotik how do i go about doing it in WinBox? i got to IP -> Routes -> +New Route what do i fill-in for dst address, gateway, type, and several other options there? i'm using winbox 6.42.1. thank you very much for your kind attention. Dst Address: 192.168.8.0/24 ...
florid, on wich MikroTik have you got this configuration? i am using hex poe rb960pgs. The configuration is not exported from the device. But I drafted according to wiki page. I planned to have the experts check the configuration before implementing change to my router. Right now it is not necessar...
Thanks CZFan and xvo The reason I am looking for HW offloading is my two IP cams have constant traffic (15Mbps) from vlan80 to NAS (NAS only has one NIC and not support trunk interface) in vlan10. The Cams are physically installed outside of my house so I want to put them in a separated 'untrusted' ...
Thanks, @CZFan I followed the wiki and thought about the configuration below. Haven't tested in production yet. Would you please help take a look? Appreciate your time. I want to achieve eth5-ap trunk port leads to Cisco AP which has vlan10 (native) and vlan80. eth1 and eth2 in vlan10, eth3 and eth4...
I am using a hex poe router for my home. sfp interface connect to WAN eth1-2 is local lan network eth3-4 connect to IP cams using POE eth5 is a trunk interface connects to a Cisco AP. Create a vlan interface (vlan80) under eth5. Cisco AP has two VLAN, one is a default vlan, the other is vlan80. I cr...
That's quite easy.
Create VLAN interfaces under ETH2 with the vlan id you want to tag. Eg. from vlan 102 to vlan 106. Create 5 vlan interfaces.
vlan 101 untagged vlan no need to create, just use eth2 should be fine.
Screen Shot 2018-01-25 at 10.50.08 PM.png Screen Shot 2018-01-25 at 10.51.02 PM.png I noticed some related message in log. And the wireless and clients got disconnected during that time. Not understand why. Both Router (rb960pgs) and AP (wAP ac) are running on 6.40.5. I expect the AP to run as stab...
The IP shows on the modem starts with 100.64 right? This is not a public IP, it is a private ip scope. Your ISP does another NAT. Nothing you can do other than talk to your ISP to get a public IP address. If you want to do port forwarding, you need to change the ISP modem to bridge mode and let Mikr...