Anything new?

+10

I completely agree with andreacoppini. I did not even mention distributed (or local) forwarding functionality on AP's because I think all vendors implemented it. Personally I have very good experience with Trapeeze wireless and H3C controllers. Trapeeze has the best management and monitoring service...

Well hotel site is completely different network that school requires. You had on that site one simple ssid with no authentication at all? You simply cannot do 802.1x with seamless roaming and other stuff like that if you dont have centralized wireless controller. I don't even mention automated chann...

Hi, Mikrotik is not good for school and company enviroment. I guess you are gonna need some 802.1x authentication and stuff like that? You can't do seamless roaming between AP's without centrally managed wireless switch and AP's as thin clients Which country are you from? I can recommend some centra...

Same problem here, I even tested a downgrade.

Scenario:
RB600 <> RB411 17,5km wireless link, using nstreme best fit, disable csma.

with ROS 3.30 is throughput stable at 20mbit/s
with ROS 4.2 is unstable between 13-18mbit/s

same frequencies same everything.

Did anyone find solution?

Hi All, I finally got assingned some IPv6 addresses and today I was testing IPv6 with hotspot authentication. And it seems that hotspot completely ignore ipv6 client so ipv6 is able to gain full internet access without any logon to network or simple queve to limit his speed. I suppose this is just s...

3.27 on routers ABC and 3.28 on the rest.
Standard routing package

Hi all! I'm having some trouble with OSPF routing. I have quite simple network see URL: http://jirka.ehm.cz/temp/ospfnetwork.pdf Router's A, B, C are in area 0.0.0.0 and router A is connected to internet. Problem is with this topology router B somehow think's that better way for network's in area2 a...

Is there any future plan's for dude to support IPv6 monitoring?
I suppose there is, so when should we expect it?

I'm testing IPv6 in my network and monitoring if device is responding on ipv4 and on ipv6 could be very helpfull.

Thanks!

I set NAT on mikrotik device and question is if that is correct behaviour.

this is my settings:
chain=srcnat action=masquerade out-interface=wlan1

Is it correct?

I tryed several option's but everytime I seen inside customer's IP on hotspot


Thanks!

Hi all, I have a small problem with customer's that have their own MT box that is configured to NAT everything that goes from customer network outside, this device is connected to my wireless hotspot. I use for hotspot addresses 172.16.0.0/24 and customer have their home subnet 192.168.0.0/24. Probl...

Anyone from Mikrotik have comment on this?

Or at leaste does anyone have some script that would check ospf state and in case that is down it simply disabled and enabled IP addresses?

Hi all, I'm seeing some strange behaviour of OSPF on wireless link's. I have OSPF running on approx 40 router's and there is probaly some bug causing that randomly some wireless interface change state to down, If I check wireless registration table link uptime is in days. There is no message in log....

thank you for hint. But is routing-test stable and ready for production enviroment? I had some other interesting idea how to solve this problem, and I think this could work pretty well. I will use severeal areas in my network. for example I say that area 1.1.1.1 will have IP addresses from subnet 10...

I did some more testing today and find some troubles. I'm using stub area at end of network. and this is probaly why connected routes does'nt import into ospf. I did some more digging on internet and it looks like ospf don't support external routes in stub area. Is there some way around this problem...

3.22

Hi, I'm having some troubles with redistributing connected routes into a different area. I have backbone area where this function work's correcly. Then I have approx 20 router's in area2 randomly conected between them. I want to redistribute connected routes into OSPF. When I set them to As type 1, ...

Anyone with idea how to solve this? thx

Hi, I'm having some troubles with redistributing connected routes into a different area. I have backbone area where this function work's correcly. Then I have approx 20 router's in area2 randomly conected between them. I want to redistribute connected routes into OSPF. When I set them to As type 1, ...

omg, sorry guys! you are right.

I tested it before with or without this option but I guess that I simply did'nt wait long enough for ospf to reconfigure routes.

Thank you for help!

What about grouping multiple small /26 subnet's to large /24 ?

Here you go. It seems I'm unable to upload txt or any other format type to this forum so my config is here http://jirka.ehm.cz/temp/config.txt Thank you for any help. /routing ospf lsa print AREA TYPE ID ORIGINATOR SEQUENCE-NU... prilepy router 172.25.4.2 172.25.4.2 0x800000C5 prilepy router 172.26....

No, problem is that I have totally 3 areas. 1st 0.0.0.0 as backbone 2nd 1.1.1.1 type stub 3nd 2.2.2.2 type stub problem is that routes from area 1.1.1.1 are also distributed to area 2.2.2.2 any idea what problem could be here? Also is there any way to group simillar adress spaces on one router to on...

Hi,

I have exacly same problem. Was you able to find solution for it?

thx

I'm having same problem. Customer's stupid switch time to time loop my whole network.

Have anyone some idea howto detect it or better block this one radio station?



thanks

Have anyone find solution to this issue? I tryed everything you guys wrote there but still time to time (random time between day or few days) one side of dual nstreme hangs, and only disable and enable get it working again. Or what kind of information I should post there to get this problem solved? ...

Hi, Have anyone tryed to get working HA dude server? What i expect from this is 2 dude servers in different network parts, both monitoring all network and somehow synchronize between together. I now have one dude server but time to time some link to dude fall down, and in that time I have 600 messag...

Hi, I have set up dual nstreme link on 6km, signal is -60 everything is working, even with greater troughput, but after some time nstreme disconnect. If I on one 1st-side disable and enable nstreme everything starts work again. And also if I'm trying to modify some settings in dual nstreme interface...

thanks for help.

But isn't 6 connection per user so small number?
If i look in my linux number users have between 2-50 opened connections.

I want to limit connection per user.
thx for help, or link to thread in forum I did'nt find it