Community discussions

MikroTik App

Search found 67 matches

by netravnen
Tue Jan 02, 2024 2:19 pm
Forum: General
Topic: advice/pitfalls of switch rule set vlan from mac
Replies: 2
Views: 601

Re: advice/pitfalls of switch rule set vlan from mac

The example from the docs is: Add VLANs in the Bridge VLAN table and specify ports: /interface bridge vlan add bridge=bridge1 tagged=ether2 untagged=ether7 vlan-ids=200,300,400 Add Switch rules which assign VLAN id based on MAC address: /interface ethernet switch rule add switch=switch1 ports=ether7...
by netravnen
Thu Dec 28, 2023 3:42 pm
Forum: General
Topic: VxLAN duplicate MACs in FDB
Replies: 2
Views: 734

Re: VxLAN duplicate MACs in FDB

/interface bridge vlan add bridge=bridge tagged=bridge,sfp1,vxlan1,ether2 vlan-ids=1401 add bridge=bridge tagged=bridge,sfp1,vxlan1,ether2 vlan-ids=1404 add bridge=bridge tagged=bridge,sfp1,vxlan1,ether2 vlan-ids=1500 Skip tagging the bridge interface unless you need an IP address added to the VLAN...
by netravnen
Mon Dec 25, 2023 11:57 pm
Forum: Forwarding Protocols
Topic: BGP Established Issue in between MikroTik and Juniper . Error: Unsupported capability received, code: 128
Replies: 6
Views: 996

Re: BGP Established Issue in between MikroTik and Juniper . Error: Unsupported capability received, code: 128

what does mean "Unsupported capability received, code: 128 "?
Exactly what the capability codes is.

MikroTik ROS does not (yet) support capability code 128 (Prestandard Route Refresh (deprecated)).

Try disabling the capability on the remote peer.
by netravnen
Tue Dec 19, 2023 10:20 pm
Forum: Forwarding Protocols
Topic: BGP v7.13 iBGP gateways
Replies: 2
Views: 788

Re: BGP v7.13 iBGP gateways

Thoughts. comments. This normal? Because those gateways are not reachable to router1. When I changed the gw in the filters that breaks it as well.. :(
Could you post an expect for the relevant /routing/filter/* part?
by netravnen
Tue Dec 19, 2023 10:10 pm
Forum: Virtualization
Topic: Containers on CHR (x86_64) - device-mode does not apply
Replies: 7
Views: 1683

Re: Containers on CHR (x86_64) - device-mode does not apply

CHR is x86_64 though. From a license perspective. The x86_64 is a license tightly knitted to the disk-id. With CHR being "cloud license" that can be moved from one CHR to another without "much hassle". Which is how I am used to perceive it. CHR != x86_64 (from a license perspect...
by netravnen
Tue Dec 19, 2023 7:49 pm
Forum: Virtualization
Topic: Containers on CHR (x86_64) - device-mode does not apply
Replies: 7
Views: 1683

Re: Containers on CHR (x86_64) - device-mode does not apply

I see what you mean. From the package page is can I added be seen that container is support on both x86_64 VM platform and CHR platform. https://help.mikrotik.com/docs/display/ROS/Packages > *) container - added support for running Docker (TM) containers on ARM, ARM64 and x86 (containers created bef...
by netravnen
Tue Dec 19, 2023 8:11 am
Forum: Virtualization
Topic: Containers on CHR (x86_64) - device-mode does not apply
Replies: 7
Views: 1683

Re: Containers on CHR (x86_64) - device-mode does not apply

https://help.mikrotik.com/docs/display/ ... chitecture

According to the table, the container feature is not available on CHR.

The first video in the Container Series on the MikroTik YouTube channel lists the same information. Containers, part 1, 1m5s mark Playlist
by netravnen
Thu Dec 07, 2023 7:17 pm
Forum: Scripting
Topic: [PHP] Realtime Traffic Graph on interfaces
Replies: 1
Views: 1611

Re: [PHP] Realtime Traffic Graph on interfaces

Depends on what you what to archive. How small you want your/accept your intervals to be. You could look into using MQTT for this (push model). Run a script on the MT device every <interval> which published the current up/down values to MQTT topic(s). Then have your service subscribe to the topics o...
by netravnen
Wed Dec 06, 2023 8:37 pm
Forum: Beginner Basics
Topic: IPv6 issues: v6 only for a few address blocks, v4 otherwise [SOLVED]
Replies: 8
Views: 2997

Re: IPv6 issues: v6 only for a few address blocks, v4 otherwise [SOLVED]

Looking into it a layer deeper. The on-link flag /ipv6 nd prefix does make sense in your scenario UNLESS all subnets are located on the same broadcast domain (which I assume is not the case). DHCPv4 support defining classless routes as a DHCP option. The draft for DHCPv6 seems to have not made it pa...
by netravnen
Wed Dec 06, 2023 8:28 am
Forum: Beginner Basics
Topic: IPv6 issues: v6 only for a few address blocks, v4 otherwise [SOLVED]
Replies: 8
Views: 2997

Re: IPv6 issues: Want to advertise three v6 pfx w/ SLAAC [SOLVED]

I am still not sure how to convince the routing tables on laptops etc. to only route to those three ipv6 address blocks and perfer-v4 otherwise. Perhaps I need to just live with the default route and use firewall to achieve what I want? Maybe I send back an ICMP unreachable for all but the blocks I...
by netravnen
Tue Dec 05, 2023 6:13 pm
Forum: Beginner Basics
Topic: IPv6 issues: v6 only for a few address blocks, v4 otherwise [SOLVED]
Replies: 8
Views: 2997

Re: IPv6 issues: Want to advertise three v6 pfx w/ SLAAC [SOLVED]

For tunnelbroker, there is an example available on the old mikrotik wiki. I recommend using this as a starting reference point for your configuration.
by netravnen
Sat Nov 25, 2023 11:39 pm
Forum: Beginner Basics
Topic: Setup a secure VPN
Replies: 3
Views: 1178

Re: Setup a secure VPN

See the documentation for getting started with a VPN solution on MT: https://help.mikrotik.com/docs/display/ROS/Virtual+Private+Networks Wireguard is the simplest to get going with. In terms of configuration required. ZeroTier will require at minimum a free account with ZeroTier.com. & connectin...
by netravnen
Sat Nov 25, 2023 11:29 pm
Forum: Beginner Basics
Topic: Setup a secure VPN
Replies: 3
Views: 1178

Re: Setup a secure VPN

Hello, I have CRS326-24G-2S+RM router at my office and RB760iGS at home, and i would like to setup a secure VPN. I am a newbie to this, can i get some help please? Thank you. The CRS326 is what I would call a great L3 switch with HW-offloading functionality if used within it's documented capabiliti...
by netravnen
Mon Nov 20, 2023 3:10 pm
Forum: General
Topic: RouterOS v7 - NetFlow v9 - SrcAS (Source Autonomous System) is missing
Replies: 2
Views: 797

Re: RouterOS v7 - NetFlow v9 - SrcAS (Source Autonomous System) is missing

https://help.mikrotik.com/docs/display/ROS/Traffic+Flow

Why not setup a Mikrotik CHR (KVM) in a lab to validate your design requirements?
by netravnen
Tue Nov 14, 2023 7:57 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 51901

Re: IS-IS

Looking way back at the comparison table, Virtual Links Supported ( ospf yes / is-is NO ). Isnt that a plus for OSPF? depends. and 'virtual links' is a big ambiguous. IS-IS requires an ethernet-like layer2 interface, it wont run over IPIP or Wireguard for example, but it will certainly work over an...
by netravnen
Mon Nov 13, 2023 5:27 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 51901

Re: IS-IS

Nice. Just noticed the inclusion of IS-IS in the 7.13beta1. Time for testing it out. :D
by netravnen
Mon Nov 13, 2023 10:10 am
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 90729

Re: v7.12 [stable] is released!

Yes I know about this option, but I guess to simplify my configuration file I prefer MD5, which I also use in OSPFv2. OSPFv2 can only do MD5 - https://docs.frrouting.org/en/stable-9.0/ospfd.html @vecino From the GitHub Issue tracker ( frrouting/frr#14398 ) It would seem HMAC SHA support in OSPFv2 i...
by netravnen
Sat Nov 11, 2023 2:00 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 90729

Re: v7.12 [stable] is released!

MD5 encryption still doesn't work with OSPFv3 - testing between FRRouting 9.0.1 and 7.12. FRRouting vs FRRouting works fine. config: /routing ospf interface-template set *9 area=backbone-v3 auth=md5 auth-id=1 auth-key=************** ... log: default-v3 { version: 3 router-id: 10.***.***.1 } backbon...
by netravnen
Sat Nov 11, 2023 1:35 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 51901

Re: IS-IS

is-is is not TCP/IP, it's CLNP.
I know. 🤠
Why would it require IPv4 or IPv6 addressing to function?
feeling confused 😕 Unable to comprehend how to respond
by netravnen
Tue Nov 07, 2023 5:06 pm
Forum: RouterBOARD hardware
Topic: QSFP to SFP28 adapter
Replies: 2
Views: 2029

Re: QSFP to SFP28 adapter

I use QSFP to SFP28 adapter in CRS326. Auto negotiation is not working, link ok if only forcing 1G or 10G, but i need 25G. Just to be sure I got you right. Are you trying to run the ports at 25 Gbps speed in the CRS326-24S+2Q+RM that only supports 24x 1/10 Gbps, 2x 40 Gbps ports? From the brochure ...
by netravnen
Tue Oct 31, 2023 11:10 am
Forum: Beginner Basics
Topic: MPLS / VPLS over the internet [SOLVED]
Replies: 2
Views: 1509

Re: MPLS / VPLS over the internet [SOLVED]

Yes. It is possible to run MPLS over Layer 2 tunnels over the internet. Think GRE, openvpn, L2TP, openvpn, VXLAN, and Zerotier tunnels as examples. Apart from which layer 2 tunnel type you use. Keep in mind the encryption overhead if going with GRE or L2TP or VXLAN. (usually openvpn, wireguard, or i...
by netravnen
Thu Oct 19, 2023 7:42 pm
Forum: RouterBOARD hardware
Topic: CCR2004-1G-2XS-PCIe possible drivers Linux6.5.7 issue; PCI finds, but no eth interfaces [SOLVED]
Replies: 3
Views: 2987

Re: CCR2004-1G-2XS-PCIe possible drivers Linux6.5.7 issue; PCI finds, but no eth interfaces [SOLVED]

You will lose this device under windows. No driver support. Running stock kernel from upstream Debian or Ubuntu? (Can't see which linux based distribution you use.) Have the card myself running under proxmox with latest upstream 6.4.x kernel from proxmox no-subscription repository. To configure the ...
by netravnen
Thu Oct 19, 2023 1:05 pm
Forum: Announcements
Topic: NEWSLETTER 105
Replies: 56
Views: 44234

Re: NEWSLETTER 105

Nothing confusing here
🆗
by netravnen
Wed Oct 18, 2023 5:30 pm
Forum: Announcements
Topic: NEWSLETTER 105
Replies: 56
Views: 44234

Re: NEWSLETTER 105

Warning: mild rant about a confusing product name NEWSLETTER APRIL 2022 (#105) Read our latest newsletter and learn more about: * LHG LTE18 kit Argh. This is confusing. That both "LHG LTE18" and "LHGG LTE18" are used for this model. The product naming without double-G is IMO inc...
by netravnen
Thu Oct 12, 2023 6:34 pm
Forum: Announcements
Topic: v6.49.10 [long-term] is released!
Replies: 33
Views: 82937

Re: v6.49.10 [long-term] is released!

Point 7. is what you are looking for. Before contacting us: If you have purchased your device from a distributor, please contact them first. Check documentation and configuration examples. Maybe answer is already there. Make sure that your issue is present with the latest version of MikroTik RouterO...
by netravnen
Wed Oct 11, 2023 6:58 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 51901

Re: IS-IS

Code bits has arrived. /routing/stats/process/print where tasks=isis # TASKS PRIVATE-MEM-BLOCKS SHARED-MEM-BLOCKS PSS RSS VMS ID PID RPID PROCESS-TIME KERNEL-TIME MAX-BUSY MAX-CALC 11 isis 0 0 0 0 0 12 402 1 2s870ms 3s340ms 10ms 10ms /ip/route/print where is-is /routing/route/print where is-is Havin...
by netravnen
Fri Oct 06, 2023 3:34 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 51901

Re: IS-IS

Hmm. Looking at the 7.12beta and 7.12rc changelog and no mention of IS-IS... Might be punted to after 7.12... 🕵️ ⏳
by netravnen
Tue Oct 03, 2023 9:15 am
Forum: General
Topic: High CPU utilization on CRS354
Replies: 15
Views: 1686

Re: High CPU utilization on CRS354

This looks weird (sfp-sfpplus3). I know the one bond is disabled. But still..
/interface bonding add disabled=yes mode=802.3ad name=Link_to_IT-lite slaves=sfp-sfpplus2,sfp-sfpplus3
/interface bonding add mode=802.3ad name=to_ccr slaves=sfp-sfpplus3,sfp-sfpplus4
by netravnen
Tue Oct 03, 2023 9:10 am
Forum: General
Topic: High CPU utilization on CRS354
Replies: 15
Views: 1686

Re: High CPU utilization on CRS354

All the IP addresses are not assigned to an interface defined under /interface/vlan ? Assigning IP addresses directly to interfaces in a bridge or a VLAN interface defined under /interface/bridge/vlan is afaik the incorrect way of doing it with CRS3xx series switches. If HW-offleading is to be archi...
by netravnen
Wed Sep 20, 2023 10:21 am
Forum: General
Topic: BGP major bug found in 7.10.1
Replies: 5
Views: 908

Re: BGP major bug found in 7.10.1

All of a sudden BGP stopped working, no Connection, no Templates, nothing configured.
Any indicators of the "error" you gathered afterwards? Any log entries indicating what could have had happened?
by netravnen
Fri Sep 15, 2023 4:38 pm
Forum: General
Topic: Mikrotik S+RJ10 in CRS310-8G+2S+IN setting other data rate
Replies: 18
Views: 2654

Re: Mikrotik S+RJ10 in CRS310-8G+2S+IN setting other data rate

From another forum post about the same topic, I have the CSS610-8G-2S+ switch. Using the Mikrotik S+RJ10, the SwOS lite gives you the option to set manually only 1G, 100M & 10M speeds. On auto speed mode (and only on auto) you can get 10G, 5G & 2.5G speeds. The other side is connected to my ...
by netravnen
Fri Sep 15, 2023 4:27 pm
Forum: General
Topic: Mikrotik S+RJ10 in CRS310-8G+2S+IN setting other data rate
Replies: 18
Views: 2654

Re: Mikrotik S+RJ10 in CRS310-8G+2S+IN setting other data rate

What if you set autonegotation off on both sides and set speed on 5G ? Or 2.5G ? This might be what you are missing. 1. Force the same speed on both ends of the link, and 2. disable auto-negotiation completely on both ends of the link. /interface/ethernet/set <INTERFACE> speed=5G-baseT auto-negotia...
by netravnen
Sat Aug 19, 2023 11:54 am
Forum: Beginner Basics
Topic: MLAG Support On CHR?
Replies: 5
Views: 1718

Re: MLAG Support On CHR?

Hello, first time poster. I'm redoing my old homelab and have purchased two CRS328-24G-2S+RM switches and a hEX S for firewall. I've been trying to MLAG the hEX S across both switched and am missing something so I decided to create a virtual environment in VMWare workstation to play and debug what ...
by netravnen
Fri Aug 04, 2023 7:53 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 51901

Re: IS-IS

https://help.mikrotik.com/docs/display/ ... l+Overview

According to the wiki. It is on the way with snippets initial code arriving in 7.12
by netravnen
Fri Aug 04, 2023 7:51 pm
Forum: RouterOS beta
Topic: Feature Request: IS-IS
Replies: 7
Views: 5458

Re: Feature Request: IS-IS

https://help.mikrotik.com/docs/display/ ... l+Overview

Initial support is listed for 7.12. So I assume more features to arrive IS-IS related in the future.
by netravnen
Fri Aug 04, 2023 1:11 am
Forum: Announcements
Topic: Newsletter #113 | May 2023
Replies: 103
Views: 41915

Re: Newsletter #113 | May 2023

> CCR2004/CSS326-powered gaming festival

viewtopic.php?p=1016956#p1016956
by netravnen
Fri Aug 04, 2023 12:57 am
Forum: General
Topic: LTX2023 used CCR2216 at the WhaleLAN
Replies: 1
Views: 797

LTX2023 used CCR2216 at the WhaleLAN

Noticed on the Youtube stream of CrossTalk solutions a CCR2216-1G-12XS-2XQ being used at the LTX 2023 WhaleLAN event. ⟶ https://youtu.be/A-6vv_FG2B4?t=2218
by netravnen
Thu Aug 03, 2023 11:30 pm
Forum: General
Topic: Multiple bridge with only one bridge hardware offloaded possible?
Replies: 3
Views: 1203

Multiple bridge with only one bridge hardware offloaded possible?

According to this page ⟶ https://help.mikrotik.com/docs/display/ROS/L3+Hardware+Offloading#L3HardwareOffloading-L3HWMACAddressRangeLimitation(DX2000/DX3000seriesonly) Creating multiple bridges The devices support only one hardware bridge. If there are multiple bridges created, only one gets hardware...
by netravnen
Sat Jul 29, 2023 12:24 am
Forum: RouterOS beta
Topic: IPv6 Prefix ID per IPv6 enabled interface
Replies: 31
Views: 4875

Re: IPv6 Prefix ID per IPv6 enabled interface

Hi, My main issue/trouble with how the Prefix ID assignment is done. Is that I reboot the router (software upgrade). I cannot count on the Prefix (i.e. the /64 sub-delegated [by the ROS router] out of SP delegated /48) being stable. Meaning I experience a changing /64 Prefix. Which is quite annying....
by netravnen
Wed Jul 26, 2023 11:53 pm
Forum: RouterOS beta
Topic: IPv6 Prefix ID per IPv6 enabled interface
Replies: 31
Views: 4875

IPv6 Prefix ID per IPv6 enabled interface

@MikroTik, Does RouterOS v7 support specifying a static "IPv6 Prefix ID" on per-interface basis? Just rebooting my MikroTik router is a frustration. Due to every IPv6 enabled Local Area Network Interface changing the assigned /64 Subnet. To clarify, my provider assigns a reasonbly static /...
by netravnen
Mon May 01, 2023 2:42 pm
Forum: Forwarding Protocols
Topic: Mikrotik v7 BGP l2vpn-evpn
Replies: 14
Views: 7245

Re: Mikrotik v7 BGP l2vpn-evpn

+1

1. EVPN
by netravnen
Sun Oct 24, 2021 2:17 pm
Forum: RouterOS beta
Topic: BGP Filter bgp-as-path reject
Replies: 7
Views: 4570

Re: BGP Filter bgp-as-path reject

if (bgp-as-path 11111|22222) {reject} else {set bgp-local-pref 120; accept;} From https://help.mikrotik.com/docs/pages/viewpage.action?pageId=74678285 bgp-as-path {regexp} If the regexp follows normal syntax should the path not be written as "^(11111|22222) .*"? if (bgp-as-path "^(11...
by netravnen
Thu Oct 14, 2021 5:10 pm
Forum: RouterOS beta
Topic: Cant assign multiple /64 from /48 pool
Replies: 3
Views: 1725

Re: Cant assign multiple /64 from /48 pool

Running RouterOS 7.1rc4 on a CCR1009-8G-1S-1S+. I set up a DHCP Client to request a /48 Pool from my Provider. Now I want to provide a /64 from this Pool to two VLAN's. But the system tells me that the Pool is exhausted after the first /64 assignement. Did I do something wrong? https://help.mikroti...
by netravnen
Wed Sep 15, 2021 2:57 pm
Forum: RouterOS beta
Topic: Wireguard routing through Endpoint
Replies: 2
Views: 1509

Re: Wireguard routing through Endpoint

Is the set-up like this? LAN --> MT router --> WG tunnel --> VPS --> Internet, where the MT router is doing the PAT towards the Internet? Or LAN --> MT router --> WG tunnel --> VPS --> Internet, where the *VPS* is doing the PAT towards the Internet? (PAT: Port address translation, aka. Firewall mang...
by netravnen
Sun Jul 04, 2021 4:21 pm
Forum: RouterOS beta
Topic: [Feature Request] Limit the possibility of upgrading a device with the image for the wrong architecture
Replies: 3
Views: 1393

[Feature Request] Limit the possibility of upgrading a device with the image for the wrong architecture

_As a MikroTik user and product consumer I want better reliability in performing manual upgrades So that the possibility for ending up with a broken install is limited_ ## Description Recently I performed a manual re-install of a CRS326 with ROS 7.1b6. By mistake, I downloaded the wrong image from t...
by netravnen
Mon Jun 07, 2021 5:49 pm
Forum: RouterOS beta
Topic: Feature request: Wildcard DNS on Address Lists
Replies: 14
Views: 5263

Re: Feature request: Wildcard DNS on Address Lists

you think really routeros go test from If done on a reactive basis with the dns server on the network being the routeros gateway. And done before the connection + dns reply is delivered to the client on the inside of the gateway router. It should (in theory!) be very feasible to implement. Entries ...
by netravnen
Mon Jun 07, 2021 3:21 pm
Forum: RouterOS beta
Topic: Feature request: Wildcard DNS on Address Lists
Replies: 14
Views: 5263

Re: Feature request: Wildcard DNS on Address Lists

use these lists for traffic forwarding, not blocking
What about a solution using an external server to expand e.g. the Google as-set (using e.g. bgpq3) into an ip-prefix lis. That could then be imported (push from server, or pull from RouterOS) as an address list into the firewall config context?
by netravnen
Mon Jun 07, 2021 3:11 pm
Forum: RouterOS beta
Topic: Feature request: Wildcard DNS on Address Lists
Replies: 14
Views: 5263

Re: Feature request: Wildcard DNS on Address Lists

Use an external DNS server as a work-around (i.e. dns blackhole, instead of blocking the traffic on IP level.)
# The wildcard domain (*.google.com) and all subdomains will be resolved as 127.0.0.1 - dnsmasq.conf
address=/.google.com/127.0.0.1
by netravnen
Mon Jun 07, 2021 12:26 am
Forum: RouterOS beta
Topic: RouterOSv7 first look – MLAG on CRS 3xx switches
Replies: 11
Views: 9610

Re: RouterOSv7 first look – MLAG on CRS 3xx switches

Did some testing with the new MLAG feature and wrote a blog post on it. Have you considered e.g. using a GRE tunnel interface as the peer-port to be able to ensure IP multi-path redundancy in your test topology? Thereby avoiding relying on the physical peer interface not being interrupted during no...
by netravnen
Tue Feb 09, 2021 7:14 pm
Forum: RouterOS beta
Topic: rpki verify in new routing firewall rule
Replies: 4
Views: 1657

Re: rpki verify in new routing firewall rule

https://help.mikrotik.com/docs/display/ROS/ROSv7+Basic+Routing+Examples
/routing/bgp/rpki
add group=myRpkiGroup address=192.168.1.1 port=8282 refresh-interval=20

/routing/filter/rule
add chain=bgp_in rpki-verify=myRpkiGroup
add chain=bgp_in match-rpki=invalid action=reject
add action=accept
?
by netravnen
Wed Nov 25, 2020 3:34 am
Forum: RouterOS beta
Topic: Feature Request: IS-IS
Replies: 7
Views: 5458

Re: Feature Request: IS-IS

https://help.mikrotik.com/docs/display/ROS/v7+Routing+Protocol+Status Seeing as the focus is on OSPF as the IGP of choice. Unless the routing daemon powering RouterOS is "best of breed" open source(ish) choice... IS-IS in RouterOS I can only see in a far far far away future. As it's the ch...
by netravnen
Mon Jul 20, 2020 2:14 pm
Forum: RouterOS beta
Topic: CRS317 routing speed with pppoe and L3 offloading
Replies: 6
Views: 2773

Re: CRS317 routing speed with pppoe and L3 offloading

It's insane with ISPs that use PPPoE in such speeds. Customers will spend most of their CPU resources to encap/decap packets. It's just sad. Can you say AS3320 Deutsche Telekom ... :( Had to ditch my trusty 2011, since routing with pppoe (WAN), NAT, and a few dusin FW rules, anything (DL) much more...
by netravnen
Tue Jul 14, 2020 6:58 pm
Forum: SwOS
Topic: Support IPv6 for management
Replies: 6
Views: 6110

Re: Support IPv6 for management

Does MikroTik have any plans to support IPv6 for the management of devices running SwOS?
I wish they have the feature in the pipeline. It's similar to waiting for ROSv7. You know the feature is coming some day. Just not what the expected timeline for its release is.
by netravnen
Wed Apr 08, 2020 3:07 am
Forum: RouterOS beta
Topic: Mysterious 564/tcp open port 7.0beta5
Replies: 38
Views: 11290

Re: Mysterious 564/tcp open port 7.0beta5

If you execute a packet capture for 564/tcp on either the router, client or middle device in the path. Does the contents for the packets reveal anything?
by netravnen
Sat Dec 21, 2019 12:25 pm
Forum: General
Topic: RPKI
Replies: 49
Views: 19779

Re: RPKI

Hi! Still need an RPKI implementation. Here in Brazil, our RIR start to permit the use of RPKI. And here in Latin America a great number of ISP running they ASes on Mikrotik boxes. A major PRO PLUS for implementing RPKI support directly into ROS! The business case becomes stronger and stronger for ...
by netravnen
Sat Jun 29, 2019 5:58 pm
Forum: General
Topic: RPKI
Replies: 49
Views: 19779

Re: RPKI

Yes, SwissIX for example. YYCIX in Calgary AB, Canada is starting to implement as well. https://yycix.ca/communities.html I'm sure it's just a matter of time before we cannot even peer in the in exchange without it. Validity state Standard Extended Large Prefix is included in client's AS-SET None N...
by netravnen
Sat Jun 29, 2019 5:48 pm
Forum: General
Topic: RPKI
Replies: 49
Views: 19779

Re: RPKI

Thank you very much for this information. Any idea when ROS 7 will be available for testing? I'm willing to test RPKI for you (IPv6 and IPv4 routes) if you send me the code as soon as it's available ;) I agree with J.Z. here. If you are willing to accept select community members into an Alpha stage...
by netravnen
Mon Dec 17, 2018 11:54 pm
Forum: General
Topic: RPKI
Replies: 49
Views: 19779

Re: RPKI

We have plans for RPKI in RouteroS v7 Any chance one can be a test pilot along-side Jan Z. on this one? Alpha testing ROS 7? 2014 was around first time RPKI was asked about. Not we hit 2018.... Still ways to go for ROS 7 being available with RPKI and Large BGP Communities support (I assume?).
by netravnen
Mon Sep 10, 2018 10:31 am
Forum: Announcements
Topic: Newsletter #84
Replies: 47
Views: 31415

Re: Newsletter #84

Have MikroTik ever had a discussion about the format of rackmounts. So to be able to mount TWO instead of only ONE RBx00x device in 1 rack-unit ? Would love to have the option of mounting 2 RBx00x devices in 1U instead of having to use 2U. See this example from Juniper SRX100: https://rickmur.com/wp...
by netravnen
Tue Mar 06, 2018 2:39 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 255322

Re: RouterOS v7.0 beta1 - when?

Didn't you hear? Almost all v7 features have been backported to v6! No. I have not (before now) stumbled across that information. At least we now have kids control and detect internet! Super essential features for routers running BGP in the public internet :lol: :lol: So looking forward to when Rou...
by netravnen
Tue Mar 06, 2018 2:09 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 255322

Re: RouterOS v7.0 beta1 - when?

Looking away from RouterOS v6.x running IPv6 BGP [tables]? Not being able to verify IPv6 routing table (when not main table!) is really a big deal. (But seeing the routes exists by the number the route counter shows. :sigh:) And doing policy routing rules for anything else than main table in IPv6. I...
by netravnen
Wed Feb 14, 2018 12:24 am
Forum: General
Topic: Where is VRF, Route Rules, and Routing table selector for IPv6
Replies: 1
Views: 1534

Where is VRF, Route Rules, and Routing table selector for IPv6

Dear MikroTik, The following 3 feature are partly a major showstopper for me when trying to deploy IPv6 here in 2018. 6 years since 2012 and 20 years since the RFC was published in 1998. 1. No way to view IPv6 not in main routing table. (Imported via BGP peering sessions from eBGP speakers over IPv6...
by netravnen
Sun Dec 31, 2017 3:10 am
Forum: General
Topic: Feature request - DNSCrypt support...
Replies: 173
Views: 80708

Re: Feature request - DNSCrypt support...

+1

dnscrypt-proxy added as a separate npk package ?

So initially not a full-blown server. Just a forwarder.