Community discussions

MUM Europe 2020

Search found 70 matches

by ivanperino
Wed Jan 07, 2015 4:48 pm
Forum: Forwarding Protocols
Topic: Dynamic Interfaces (sstp) made static on OSPF disappear
Replies: 2
Views: 751

Re: Dynamic Interfaces (sstp) made static on OSPF disappear

add static entry in "/interface sstp-server" menu
YOU ARE RIGHT thank you very much.
by ivanperino
Wed Jan 07, 2015 3:55 pm
Forum: Forwarding Protocols
Topic: Dynamic Interfaces (sstp) made static on OSPF disappear
Replies: 2
Views: 751

Dynamic Interfaces (sstp) made static on OSPF disappear

Hello community, We have OSPF over a SSTP link. Such interfaces are fixed static on OSPF->Interfaces in order to chage default cost to a fixed one. When SSTP falls down because any failure, it becomes unknown in OSPF->Interfaces. Then, when SSTP goes up again, it appears as a dynamic Interface with ...
by ivanperino
Wed Jun 20, 2012 11:16 am
Forum: General
Topic: DHCPrelay --> two links --> DHCPserver
Replies: 5
Views: 2178

Re: DHCPrelay --> two links --> DHCPserver

ZeroByte: I really appreciate your answer. We have already tryed to set a Loopback interface just creating a bridge without any port. But guess that, DCHP server didn´t work, i.e. it didn´t deliver any IP to DHCP client. It seems that DHCP request "must" enter through the interface where DHCP server...
by ivanperino
Thu Apr 05, 2012 7:39 pm
Forum: Forwarding Protocols
Topic: ospf filter over a interface
Replies: 1
Views: 870

ospf filter over a interface

How I can filter a route just over an specific interface?

I want the default route to be published if main route is available, but I dont want the default route to be published if the secondary route take place.
by ivanperino
Tue Mar 13, 2012 4:52 pm
Forum: General
Topic: DHCPrelay --> two links --> DHCPserver
Replies: 5
Views: 2178

DHCPrelay --> two links --> DHCPserver

HI My DHCP-server is a PR732 and DHCP-relay is a RB750GL. Connection between them is made through two different interfaces. RB750GL reaches PR732 via eth1 and via eth2 (it is because redundancy). RB750GL performs a DHCP-relay where DHCP-server-IP is the one at the eth1 in PR732. DHCP-server in PR732...
by ivanperino
Sat Mar 03, 2012 1:05 am
Forum: Forwarding Protocols
Topic: Sharing configuration between two VRRP
Replies: 0
Views: 584

Sharing configuration between two VRRP

Hello specialists, I am investigating and making some probes with VRRP before applying to the main router in the company. One of my question is about the whole configuration a router could have. For example, DHCP servers, leases, firewall rules, Routing protocols, etc must be in both routers ? When ...
by ivanperino
Wed Feb 16, 2011 8:51 pm
Forum: General
Topic: ITU compliement
Replies: 1
Views: 361

ITU compliement

Dear specialist. I am writing a new network project for a specific client. I was asked to report which of the ITU recommendation the equipments (mikrotik of course) comply for. Sincerely, I do not know where I should start finding! Does Mikrotik have any document that discuss about these issues? I w...
by ivanperino
Sat Dec 18, 2010 12:15 pm
Forum: General
Topic: Replacing PC Hardware
Replies: 1
Views: 400

Replacing PC Hardware

My principal router is an Intel PC running RouterOS 4.6 with level 5 RouterOS lays on a Standard HardDrive. I need to move the Hard Drive to another PC because the original one is failing. May I move the System without any further dangerous implications? I am afraid the system will not startup. I wa...
by ivanperino
Thu May 06, 2010 9:47 pm
Forum: General
Topic: Massive Upgrade of RouterOS
Replies: 2
Views: 1059

Massive Upgrade of RouterOS

Dear Specialists. Is there a way to Upgrade ther outerOS in many routerBOARD at the same time??? I mean, without entering through winbox each time/each router. We have about 25 units working (routerBOARDs and x86) and Upgrading them becomes a bit cumbersome. I thought NetInstall could do it but NO. ...
by ivanperino
Tue Dec 08, 2009 8:13 pm
Forum: RouterBOARD hardware
Topic: GPRS modem ZTE MF110
Replies: 6
Views: 3104

Re: GPRS modem ZTE MF110

Sergejs. I dont understand when you say "have you got support for this card"
Could you explain me a bit more? I am very interested on make this work
Thank You
by ivanperino
Tue Nov 24, 2009 7:47 pm
Forum: RouterBOARD hardware
Topic: GPRS modem ZTE MF110
Replies: 6
Views: 3104

GPRS modem ZTE MF110

I am newbie on GPRS modems, soi I would need some help to get this working. I am using a ZTE modem MF110 which is UMTS HSUPA compatible. When I plug it into the 433UAH a new line apperas in System -> Resourses -> USB. 2:3 ZTE,Incorporated ZTE WCDMA Technologies MSM... 480Mbps However, the ppp serial...
by ivanperino
Tue Nov 24, 2009 5:19 pm
Forum: RouterBOARD hardware
Topic: IP Address becomes disabled!!!
Replies: 1
Views: 479

IP Address becomes disabled!!!

Hello dears I have found in RB1000 with RouterOS 4.2 a big problem. After I set a new IP address over an ether interface, everything seems work fine, when I set any comment on it, this becomes unavailable!!! ping stops responding and I must to disable and enable the IP address for this to response a...
by ivanperino
Sun Nov 15, 2009 10:24 pm
Forum: RouterBOARD hardware
Topic: RS232 to Ethernet Imlementatin
Replies: 8
Views: 2907

Re: RS232 to Ethernet Imlementatin

It is very useful. However, I would like to know if I can send binary data through serial port given that device connected to RS232 port is not ASCII based. On the other hand, I would need to use the propietary software that is intended for the device at issue. Such software uses COM port in the PC,...
by ivanperino
Sun Nov 15, 2009 9:24 pm
Forum: RouterBOARD hardware
Topic: RS232 to Ethernet Imlementatin
Replies: 8
Views: 2907

RS232 to Ethernet Imlementatin

Dear everybody. I was wondering if there is any way to setup a router (let's say a RB433 for example) for RS232 remte conection through any known program for comversion. It should allows us to connect to a Virtual COM port in a PC and then be transmitted by IP to the remote RS232 in the Routerboard....
by ivanperino
Fri Nov 06, 2009 4:04 am
Forum: General
Topic: EoIP security?
Replies: 4
Views: 2758

Re: EoIP security?

Sorry, 47; you are right. Any other Idea? I think EoIP over L2TP is nonsense giver L2TP offers almost the same characteristics than EoIP why should I implement EoIP over L2TP?? what about the payoad? In that way, I will only exploit less than 20% of bandwith! Useful load over EoIP over L2tp over IP....
by ivanperino
Thu Nov 05, 2009 8:52 pm
Forum: General
Topic: EoIP security?
Replies: 4
Views: 2758

EoIP security?

Hello there. I am using EoIP over internet directly between two routers, I am not sure if this is a good practice. I set up an EoIP in each router at each end. The first one has the public remote address of the other router and vice versa. The thing is, there is not any security setting in order to ...
by ivanperino
Wed Nov 04, 2009 4:34 pm
Forum: The Dude
Topic: Agent not working.
Replies: 1
Views: 741

Re: Agent not working.

I can select Ping from the Tools button and successfully ping the device. This has happened to me. This seems to be a problem related to the user permisions in the dude agent. When you add an agent to the dude server, you must submit with an User and Password for the agent. If such user has no full...
by ivanperino
Tue Nov 03, 2009 4:38 pm
Forum: The Dude
Topic: Backup file size TOO big
Replies: 2
Views: 1100

Re: Backup file size TOO big

Thank you very much
by ivanperino
Tue Nov 03, 2009 2:59 pm
Forum: The Dude
Topic: Backup file size TOO big
Replies: 2
Views: 1100

Backup file size TOO big

I have worked with dude for 2 years and something weird has happened last time. The backup file size has become too big. See the list of backups: ... bup-dude-2008.09.12.xml 10.062Kb bup-dude-2009.06.24.xml 23.472Kb bup-dude-2009.07.01.xml 210.853Kb bup-dude-2009.07.08.xml 213.605Kb ... Suddenly, fi...
by ivanperino
Mon Nov 02, 2009 5:14 pm
Forum: Scripting
Topic: UPS alarm monitoring
Replies: 1
Views: 766

UPS alarm monitoring

Hello. I have connected an APC UPS through serial port. Does anybody know how to proceed for UPS on-battery monitoring? I thought there would be a On-UP / On-DOWN windows for scripting as it exists in Netwotch tool. Is there any other way to take an action over a power line failure than Checking UPS...
by ivanperino
Fri Oct 23, 2009 9:37 pm
Forum: General
Topic: Routing in PPTP client
Replies: 2
Views: 504

Re: Routing in PPTP client

thank you very much Chupaka, It was very useful.
by ivanperino
Fri Oct 23, 2009 9:36 pm
Forum: General
Topic: Interface Affection
Replies: 2
Views: 521

Interface Affection

My question is about Interface limiting / queue. Suppose I have a eoip_interface that runs over the ether1 because ether1 is my internet conexion. If I set any policy over ether1, is eoip_interface also affected? Let´s say changes in MTU, rate limiting, marking packets that pass through the ether1.....
by ivanperino
Thu Oct 22, 2009 5:34 pm
Forum: General
Topic: Routing in PPTP client
Replies: 2
Views: 504

Routing in PPTP client

Hello SPecialists I need to set up a route in a VPN user. I am using PPTP in RouterOS v4. I mean, when remote user is connected to the VPN, this should only uses the VPN service for 10.0.0.0/8 network. Any other IP (public or private) should be routed by his regular internet connection and not throu...
by ivanperino
Wed Oct 21, 2009 5:57 pm
Forum: Forwarding Protocols
Topic: OSPF Settings in v4.x???
Replies: 1
Views: 747

OSPF Settings in v4.x???

Hello there.
I cannot find OSPF settings in the newest versions 4.x
In previous versions, You were able to change type 1 or 2 from a buttom placed in the bottoms bar in the Interfaces Tab.
It has disapeared!!
Does anybody know how to set those parameters in version 4??


Tahnk you
Ivan Perino
by ivanperino
Tue Sep 29, 2009 4:02 pm
Forum: General
Topic: Mikrotik Repeater with low power consumption
Replies: 0
Views: 380

Mikrotik Repeater with low power consumption

Hello everybody. I need to set up a remote repeater with solar panel and batteries. I lack of power lines on there. Could you recommend me any specific implementation? Some RB with low power feature may be? I need 2 wireless card (one for distribution and one for backhauling). I know I should set th...
by ivanperino
Tue Sep 08, 2009 10:45 pm
Forum: Scripting
Topic: Remote BackUp
Replies: 1
Views: 676

Remote BackUp

Dear Specialists:

I would like to know how to implement a script for saving configuration periodically but in a remote manner.
I mean, save Router configuration and then send it by ftp or something similar. I think it is already well solved.
Thank you very much


Ivan
by ivanperino
Thu Jul 23, 2009 8:03 pm
Forum: The Dude
Topic: Dude Agent - User
Replies: 1
Views: 776

Dude Agent - User

Hello there.
How I can set an User and Password for the Dude Agent in the Router where de agent runs?
In the dude server I set dude agents but they work only with "admin" and no password. If I set (for example) user: dude password: 1234 , the agent does not pick up.
by ivanperino
Wed Jul 15, 2009 1:22 am
Forum: General
Topic: Firewall Rule & DHCP
Replies: 1
Views: 423

Firewall Rule & DHCP

I just Want to allow access to only those computers that was given a IP through the DHCP server. I need to Block forwarding to every fixed IP address.
To summarize. Only ip address leased by DHCP should by forwarded.
Does anybody know how to do it?=
Thank You
by ivanperino
Thu Jun 25, 2009 9:42 pm
Forum: General
Topic: VRRP not working properly
Replies: 6
Views: 2094

Re: VRRP not working properly

Thank You Louis for your help, But again, I have tested VRRP with equal priority as I said in the post (=100). Despite Priority, the same Router becomes the master when both routers are available and decision depends on IP address (as it is specified in the wiki. please, take a glance on http://wiki...
by ivanperino
Thu Jun 25, 2009 12:42 am
Forum: General
Topic: VRRP not working properly
Replies: 6
Views: 2094

Re: VRRP not working properly

Chupaka, I am using 3.25. I have read all posts concerning VRRP and also examples from Wiki, RouterOS manual, etc. The point is ip address afect Master election despite of Preemtive Mode OFF. I have changed IP address and this happens all the time, I mean, I have found where the problem resides but ...
by ivanperino
Wed Jun 24, 2009 6:00 pm
Forum: General
Topic: VRRP not working properly
Replies: 6
Views: 2094

VRRP not working properly

Dear friends. I have set up 2 RB433AH with VRRP and they are not working as in example given in WIki. I set Preemption-mode = OFF. all configuration is correct and match to the example given in Wiki. see below. ======================== VRRP without Preemption Each time when router with higher priori...
by ivanperino
Sat Jun 13, 2009 2:55 am
Forum: General
Topic: DNS server
Replies: 4
Views: 3262

Re: DNS server

I'm sorry ChangeIP. I've read your post once and once again, but I am afraid not to understand you very well. Could you give me an example of you are advicing to me? I would really apreciate it very much. I´ve thought to implement a dedicated DNS server independet from RouterOS, I dont know, may be ...
by ivanperino
Sat Jun 13, 2009 12:03 am
Forum: General
Topic: DNS server
Replies: 4
Views: 3262

DNS server

Hello specialists. I would like to know if there is any way to implement more than 2 DNS servers in IP->DNS. I mean, I would need to implement a DNS server on RouterOS for all domain names in a company but with more than 2 External (public) DNS. So, computers in the network will have only 1 dns serv...
by ivanperino
Sat Jun 06, 2009 3:28 am
Forum: General
Topic: Prefered Source Ignored
Replies: 5
Views: 694

Re: Prefered Source Ignored

Dear Chupaka, pref-src is exactly for doing that. Suppose you have more than 1 internet connection and only 1 default route. So, what if you want to reach the router from outside (internet) to the public address in the router??? router will reply but it will do it by using default route which is nec...
by ivanperino
Fri Jun 05, 2009 9:15 pm
Forum: General
Topic: Prefered Source Ignored
Replies: 5
Views: 694

Prefered Source Ignored

v3.20 over x86 # DST-ADDRESS----------PREF-SRC------GAT-STATE----GATEWAY-----DIST--INTERFACE 0 A S 0.0.0.0/0----------200.47.9.180---reachable------200.47.9.190--1------vlan10 1 S 0.0.0.0/0--------------------------reachable------pppoe-1-------1-----pppoe-1 2 ADC 10.9.0.0/24-------10.9.0.1----------...
by ivanperino
Tue Jun 02, 2009 12:28 am
Forum: General
Topic: Using another port than 1701 for L2TP
Replies: 13
Views: 10217

Using another port than 1701 for L2TP

Let´s to say there is a network very limited in opened ports, just 22, 21 80 and maybe 8080. I want to stablish any kind of VPN between two routers. But using L2TP for example there is no way to coneect L2TP server on 1701 port!! What should I do to change destiny port in L2TP client?? dst-nat does ...
by ivanperino
Tue Sep 02, 2008 5:55 pm
Forum: The Dude
Topic: Dude + CompactFlash + RB1000
Replies: 25
Views: 7213

Dude + CompactFlash + RB1000

Dear Genius: I need to perform dude server on RB1000 but a problem has arisen. HDD space is not enough! I´ve installed a 4GB CompactFlash 4x into the external CompactFlash slots in RB1000 and it has been detected and formated by WebProxy but what I really need is to use that memory card with Dude Se...
by ivanperino
Tue Aug 19, 2008 8:34 pm
Forum: Scripting
Topic: rebooting by telnet on script
Replies: 2
Views: 1642

rebooting by telnet on script

Hello there. I wonder if there is a way to develope a script which be able to reboot an external device such a motorola PTP600. Here are the 3 comands i need to perform, I could not do it by scripting, I have heard I need some more tools to do it telnet 10.12.1.5 passwd reboot yes the first line car...
by ivanperino
Fri Jun 20, 2008 12:29 am
Forum: RouterBOARD hardware
Topic: RB1000U migration trouble
Replies: 3
Views: 1494

Re: RB1000U migration trouble

I have done 5 tests and believe me, configuration is OK. 3 tests have been performed on x86, RB600 and RB532 with ROS 3.10v with the same configuration and all of them worked properly. 2 tests have been performed on diferents RB1000 with ROS 3.3 and another with 3.10 with the same configuration and ...
by ivanperino
Tue Jun 17, 2008 5:05 pm
Forum: RouterBOARD hardware
Topic: RB1000U migration trouble
Replies: 3
Views: 1494

RB1000U migration trouble

Serious Problem: Entire network is being routed by a PC x86 platform AMD 1.2Ghz, 256MB and RouterOS 3.10. Due to untidy growing and upgrading, network is conformed by VLANs over ether2 interface but also, a plain network (no vlan) is placed over this interface (it is a sort of lan coupled to a trunk...
by ivanperino
Tue May 27, 2008 6:20 pm
Forum: General
Topic: Syncro AP using GPS
Replies: 1
Views: 531

Syncro AP using GPS

Hello Forum, I would like to know if there is any way to syncronize some APs like they were on Canopy Cluster Manager. Anybody knows Interference is critical among many APs in the same tower in the same channel, even on the same AP using more than one wireless card. May be GPS syncronization could b...
by ivanperino
Mon Apr 14, 2008 3:20 am
Forum: General
Topic: Managing Various PPPoE to Internet
Replies: 2
Views: 696

Re: Managing Various PPPoE to Internet

Thank you a lot Serjes, How could I be so blind! you are right, I am sorry If this was a stupid cuestion.
Thanks again.


ivan perino
I had mangled eth incoming packets but I had forgoten to take off IP Gateway from Route List.
by ivanperino
Sat Apr 12, 2008 3:58 am
Forum: General
Topic: Managing Various PPPoE to Internet
Replies: 2
Views: 696

Managing Various PPPoE to Internet

Hello Profesionals. I have 3 PPPoE conection to internet (ADSL) and each of them have the same Gateway 200.51.241.221 but I would like to route trafic from eth1 to PPPoE1 and trafic coming from eth2 to PPPoE2. Which is the procedure to do it? I have RouterOS v3.0 - When I perform a route list, It as...
by ivanperino
Mon Apr 07, 2008 11:59 pm
Forum: General
Topic: Meaning of 48Mbps/2
Replies: 2
Views: 724

Re: Meaning of 48Mbps/2

That's right man. Thank you a lot. I sould have guess it!.
I am working on 10MHz.
by ivanperino
Mon Apr 07, 2008 11:46 pm
Forum: General
Topic: Meaning of 48Mbps/2
Replies: 2
Views: 724

Meaning of 48Mbps/2

Dear forum:
I haven't found on 3.0 version manual the meaning of Tx/Rx Rate on wireless interfaces.
I can see this only on RouterOS to RouterOS links.
In my case, it says 48Mbps/2/36Mbps/2 and I would like to know the interpretation of "/2".
I realy appreciate any clue from you, thanks a lot
Ivan
by ivanperino
Sun Feb 03, 2008 1:43 am
Forum: General
Topic: Matching MAC and IP in firewall
Replies: 18
Views: 2879

Re: Matching MAC and IP in firewall

sorry, the action is ACEPT I have not shown the entire configuration but it has been working well since months. The point is that I want to match (on firewall) by IP address and MAC address too. I will tell you the problem. Clients change theirs IP just for watching what happend. and a lot of IP DUP...
by ivanperino
Sun Feb 03, 2008 1:04 am
Forum: General
Topic: Matching MAC and IP in firewall
Replies: 18
Views: 2879

Matching MAC and IP in firewall

Hello. I was trying to match IP address and MAC address in firewall but I have not been able to do it. I just set up the following Gaps. firewall / General / Chain forward firewall / General / Src Address 192.168.200.21 (it is an example) firewall / Advanced / MAC address 00:0E:41:52:A4:B8 but, when...
by ivanperino
Mon Sep 17, 2007 2:55 pm
Forum: The Dude
Topic: moving devices to submaps
Replies: 1
Views: 1524

moving devices to submaps

How you can change (move) a device from local map to any submap keeping its configuration, name, etc.
I havent found the way to do it!
YOu cant drag and drop devices inside a submap, It doesn´t move from local map.

Thank You a lot.
Ivan Perino
by ivanperino
Fri Aug 24, 2007 1:24 am
Forum: General
Topic: How to QUEUE user by user.
Replies: 4
Views: 638

Re: How to QUEUE user by user.

It was amazing!! You saved to me a lot of time!!! tank you.
by ivanperino
Thu Aug 23, 2007 11:20 pm
Forum: General
Topic: How to QUEUE user by user.
Replies: 4
Views: 638

How to QUEUE user by user.

I need to limit datarate to every user in a LAN. They are about 50 or 60 users The problem consist. If one host start downloading e-mail (for example) It takes the entire bandwidth up to finish. The router interface of this LAN has 512Kbps asigned on queue. Is there any way to do it without adding o...
by ivanperino
Wed Aug 22, 2007 5:28 pm
Forum: General
Topic: Impossible to drop ARES p2p
Replies: 14
Views: 2492

Re: Impossible to drop ARES p2p

NORMIS. There is a connection to 66.222.xx.xx (I dont remember exactly the IP) to port 80 when ARES start. I have captured packets and the first one always contains> GET /ares/home.php... and so on what about match packets with text "ares", I dont know how to use content= on mangle, I have tryed but...
by ivanperino
Wed Aug 22, 2007 4:03 pm
Forum: General
Topic: Impossible to drop ARES p2p
Replies: 14
Views: 2492

@NORMIS!!! Impossible to drop ARES p2p

Normis, It does not block ARES program.! have you tryed your self? Ares uses http services to download packets as well as P2P connections. You can see it on firewall/connections tag on RouterOS. It also uses UDP protocol, then you cant stop ares at all!! please, try it and tell me! may be I am doing...
by ivanperino
Tue Aug 21, 2007 3:58 pm
Forum: General
Topic: Impossible to drop ARES p2p
Replies: 14
Views: 2492

Re: Impossible to drop ARES p2p

Droping UDP src-port & dest-port=0 It does not work so well. I think Ares find anothers UDP ports and it acomplishes conection through them. However it gets lower download rates but It never cut traffic! seeing on firewal / connections you can see udp port opens about 56300 to 62000. May be some bdy...
by ivanperino
Fri Aug 17, 2007 4:00 pm
Forum: General
Topic: Impossible to drop ARES p2p
Replies: 14
Views: 2492

Re: Impossible to drop ARES p2p

Nomis, First of all, thank you for your quickly response. RouterOS 2.9.44 I have already done what you said, but Ares still downloading as fast as he can! even after disconnect-reconnect ares; restarting computer; after whatever I do. Here you are Firewall lines I setted. (192.168.2.249 is the test ...
by ivanperino
Thu Aug 16, 2007 7:26 pm
Forum: General
Topic: Impossible to drop ARES p2p
Replies: 14
Views: 2492

Impossible to drop ARES p2p

Hi Specialist. I have tryed blocking ares p2p packets and I have not accomplished it. I followed the instructions on this forum but I can get good results. If you see on ip/firewall/connectios you will see all the warez conections closed, however, my ares still downloading at very high speed! It see...
by ivanperino
Tue Aug 14, 2007 5:48 pm
Forum: The Dude
Topic: 2 particular problems with Dude
Replies: 0
Views: 963

2 particular problems with Dude

I have found some problems with Dude 2.2 and 3beta6. I dont know if it has to do with mistakes of mine of it is a dude problem. Dude 2.2 doesn´t work with private MIB. In fact, I have installed WiLan MIB on 2.2 but it definitelly doenst work. I cant perform a snmpwalk, however, all the mikrotik´s MI...
by ivanperino
Mon Aug 13, 2007 12:31 am
Forum: Scripting
Topic: Generic comunicaction through serial port
Replies: 3
Views: 1340

Generic comunicaction through serial port

My inquire is about comunication through serial port on RB500. Is there any way to read and write over RS232 port on RB? I have seen SIGWATCH but it doesn´t give me a complete solution. It only watches an electrical signal on serial port. I would like to read data from that port, thus, perform some ...
by ivanperino
Wed Jul 18, 2007 10:09 pm
Forum: Beginner Basics
Topic: please. I am lost
Replies: 4
Views: 1467

Re: please. I am lost

GRACIAS HERMANOS!! GRACIAS!!
by ivanperino
Tue Jul 17, 2007 7:05 pm
Forum: Beginner Basics
Topic: please. I am lost
Replies: 4
Views: 1467

please. I am lost

My little problem is that I dont understand the Upgrading process. I mean. I have some Router boards working with 2.9.38 and some with 2.9.29 versions. The License Window says to be upgradeable up to version 3.x - what does it mean? This UPGRADING is free for charge? I have to buy a new license to u...
by ivanperino
Tue Jul 17, 2007 6:34 pm
Forum: Beginner Basics
Topic: I need some help
Replies: 3
Views: 1502

Re: I need some help

I have done what you said. Now, when I start winbox, a license window appears asking for a key!

I dont have a key.
I had a RB532 with a level4 license version 2.9.29 then now I have a demo version of 2.9.44 on my RB532.

What must I do to get my RB532 back?
THANKs
by ivanperino
Thu Jul 05, 2007 8:42 pm
Forum: Beginner Basics
Topic: I need some help
Replies: 3
Views: 1502

I need some help

I have purchased a RB532, RouterOS 2.9.29 and my license says: Soft ID: 7XXX-XX Upgradeable To: v3.x Level 4 What should I do to upgrade the RouterOS version? Need I to buy a new license? I have learned a lot about mikrotik managment but I have never upgraded a license! I need some advice. THANK YOU
by ivanperino
Sat Jun 30, 2007 12:29 am
Forum: General
Topic: RIP - Update Timer Problems
Replies: 6
Views: 1036

Re: RIP - Update Timer Problems

Well man, we are having a serius problem with RIP. I am ussing version 2.9.38 I did it all as you told me. I enabled the routing-test packets but... It has more bugs than routing packet. It is true, It sends every 5 second even after reboot but, Cisco doesnt catch it, or may be, RouterOs is not real...
by ivanperino
Thu Jun 28, 2007 10:21 pm
Forum: General
Topic: RIP - Update Timer Problems
Replies: 6
Views: 1036

Re: RIP - Update Timer Problems

Thanks Andrew. I thought it could be a bug into RouterOS.

I am already using RIPv2 but I dont know what is Tiggered updates. I will take a glance about it.
Regarding Link status I am not sure wheter Cisco1600 support it.
I wanted to use something FUL compatible with any router.

ThankS a lot.!
by ivanperino
Wed Jun 27, 2007 9:41 pm
Forum: General
Topic: RIP - Update Timer Problems
Replies: 6
Views: 1036

RIP - Update Timer Problems

Hi. I am using RIP between a CISCO1600 and a RB133c with OSv. 2.9.38 I use it with 5 seconds delay, I mean, Update_Timer = 5s. and 20s of time out, time_out=20s It seems going well but if I reboot the 133c then It starts to send RIP packets every 30 seconds! regarding, The Cisco1600 put down the rou...
by ivanperino
Fri Jun 22, 2007 4:54 pm
Forum: General
Topic: Bonding + Bridging
Replies: 9
Views: 2377

Re: Bonding + Bridging

Christian. I have found some interesting things. I have already checked the fresnel zone, interference, etc. It seems fine. But,,,, Changing Tx_power and DataRate parameters and watching CCQ values I found irregular behavior. - The most DataRate I force, the most CCQ I get. but, to get Higher datara...
by ivanperino
Sat Jun 16, 2007 6:03 pm
Forum: General
Topic: Bonding + Bridging
Replies: 9
Views: 2377

Re: Bonding + Bridging

Thanks Christian. I will do that. I´d like to ask you another little problem. I achieved a 70km link with two SR5 over nstreme protocol and its bandwith is more than 10Mbps, (I think it is excelent) but there is too much packet retransmision, the CCQ is about 48% there by there is a lot of packet re...
by ivanperino
Fri Jun 15, 2007 4:33 pm
Forum: General
Topic: Bonding + Bridging
Replies: 9
Views: 2377

Re: Bonding + Bridging

I found the problem. You cant bond wlan interface if it is in nstreme mode. All this works fine if I use 802.11 standard, the problem is I need nstreme because the distance.

If you know some solution to make this I will thank you.

Ivan Perino
by ivanperino
Wed Jun 13, 2007 12:35 am
Forum: General
Topic: Bonding + Bridging
Replies: 9
Views: 2377

Re: Bonding + Bridging

Dennis, I wanted to thank you for your response, however I have tryed to do this bonding but it doesnt work. I suppose you have understood what I did. I dont need neither STP or OSPF. I want a flat NET, I mean, it´s suppose I am be able to bridge 2 interfaces where one of them is a bonding interface...
by ivanperino
Sat Jun 09, 2007 11:27 pm
Forum: General
Topic: Bonding + Bridging
Replies: 9
Views: 2377

Bonding + Bridging

Hi mikrotik colleages. We need some help here! I have the next situation; Mikrotik 133c_placeA wlan1 = SR5 ubiquiti ether1 = OnBoard ether2 = OnBoard ether3 = OnBoard Mikrotik 133c_placeB wlan1 = SR5 ubiquiti ether1 = OnBoard ether2 = OnBoard ether3 = OnBoard I have got 2 RADlink-RADIOS Bridges betw...
by ivanperino
Tue Apr 03, 2007 4:21 pm
Forum: General
Topic: IP REDIRECT
Replies: 1
Views: 903

IP REDIRECT

Hello. I am working with Cisco 1600 and Mikrotik RouterOS at the same time. I need to configure the Mikrotik ethernet interface as "no ip redirect" it means the interface does not send ICMP messages to the network conected. These ICMP messages change hosts gateway on the network by redirecting the p...