Community discussions

MikroTik App

Search found 24 matches

by dbeyzade
Sun Jan 03, 2021 6:33 pm
Forum: General
Topic: Bonding over PPP
Replies: 4
Views: 426

Re: Bonding over PPP

I did this with AAISP lines in the UK a few years ago. I think I followed this guide:

https://support.aa.net.uk/RouterOS_bonding

Perhaps it may help
by dbeyzade
Thu Dec 31, 2020 8:33 pm
Forum: General
Topic: /interface bridge VLAN filtering untag onto bridge
Replies: 14
Views: 994

Re: /interface bridge VLAN filtering untag onto bridge

Makes sense thank you.

I understood the IPV6 traffic to not be able to take the fast path route so the figures I "guessed" were between the bottom two lines of the table.

Makes you wonder what all those ports are actually good for :)
by dbeyzade
Thu Dec 31, 2020 8:13 pm
Forum: General
Topic: /interface bridge VLAN filtering untag onto bridge
Replies: 14
Views: 994

Re: /interface bridge VLAN filtering untag onto bridge

Does this mean all traffic would go through the CPU rather than using the hardware offloading then? Yes. But if I get your use case right, most of the traffic will be routed anyway, so even if the tagging and untagging was done in hardware, the limiting factor would be the router's CPU throughput. ...
by dbeyzade
Thu Dec 31, 2020 7:11 pm
Forum: General
Topic: DHCPv6 Relay - Option 18 Interace-ID / Option 37 Remote-ID
Replies: 0
Views: 209

DHCPv6 Relay - Option 18 Interace-ID / Option 37 Remote-ID

Hi. When using the DHCPv6 relay, I can see that the MikroTik is adding an option 18. but I am not sure what the value relates to: Capture.PNG 000000e = 14 as a decimal. Interface 14? I dont have an interface 14. No option 37 is added - which should be remote circuit ID, similar to DHCPv4 Option 82 -...
by dbeyzade
Thu Dec 31, 2020 6:33 pm
Forum: General
Topic: /interface bridge VLAN filtering untag onto bridge
Replies: 14
Views: 994

Re: /interface bridge VLAN filtering untag onto bridge

what I am trying to do is only have 1 DHCP server and 1 IP for all VLANs. Basically I want to treat the VLANs as a cable into a switch. That's not the way how VLANs are normally used, but if you insist, you can use the following: /interface vlan add name=ether5.10 vlan-id=10 interface=ether5 add na...
by dbeyzade
Thu Dec 31, 2020 6:02 pm
Forum: General
Topic: /interface bridge VLAN filtering untag onto bridge
Replies: 14
Views: 994

Re: /interface bridge VLAN filtering untag onto bridge

interface bridge port add bridge=HomeBridge ingress-filtering=yes interface=eth5 /interface bridge vlan add bridge=HomeBridge tagged=HomeBridge,eth5 vlan-ids=\ 2,3,4,400 Obviously on the router you have to define each vlan -vlan's interface is the bridge. -IP pool for each vlan -dchp-server for eac...
by dbeyzade
Thu Dec 31, 2020 4:45 pm
Forum: General
Topic: /interface bridge VLAN filtering untag onto bridge
Replies: 14
Views: 994

Re: /interface bridge VLAN filtering untag onto bridge

The bridge is completely missing in your drawing, but I guess I've got the point. Like any other port of the virtual switch called "bridge", its virtual port named "bridge" can have a single "native" VLAN configured - in another words, it may act as an access port to a...
by dbeyzade
Thu Dec 31, 2020 3:42 pm
Forum: General
Topic: /interface bridge VLAN filtering untag onto bridge
Replies: 14
Views: 994

Re: /interface bridge VLAN filtering untag onto bridge

All your requirements are bogusly stated as configuration items (and thus you put yourself in a box). Instead state your requirements in terms of use cases....... what it is you would like your users to be able or not to be able to do. Draw a network diagram showing the basic connectivity planned. ...
by dbeyzade
Wed Dec 30, 2020 1:02 pm
Forum: General
Topic: /interface bridge VLAN filtering untag onto bridge
Replies: 14
Views: 994

/interface bridge VLAN filtering untag onto bridge

Is it possible to untag on to the bridge using VLAN filtering. I can set the config, but doesn't seem to work. i.e Ether 5 has VLAN 1000 on, I want to untag VLAN 1000 on to the bridge and add an IP address and DHCP server to the bridge. The only way I can get this to work is adding an interface vlan...
by dbeyzade
Tue Dec 29, 2020 7:27 pm
Forum: General
Topic: DHCPv6 - No attributes for RADIUS
Replies: 0
Views: 180

DHCPv6 - No attributes for RADIUS

DHCPv6 is not sending the same attributes to RADIUS as DHVPv4. DHCP snooping Option 82 is enabled on the bridge All of the following are missing: ADSL-Agent-Remote-Id agent-circuit-id agent-remote-id Means there is no way to actually ID the user to give them the right prefix. Every corner I turn thi...
by dbeyzade
Tue Dec 29, 2020 11:07 am
Forum: Announcements
Topic: v6.48 [stable] is released!
Replies: 324
Views: 62333

Re: v6.48 [stable] is released!

Testing the new Delegated-IPv6-Prefix via PPPoE software version 6.48 First PPPoE authentication is successful - prefix is assigned from RADIUS When a second user dials up. There is an error: could not add dhcpv6 server with pool : server with such name already exists (7) This seems to stem from the...
by dbeyzade
Mon Dec 28, 2020 7:34 pm
Forum: General
Topic: Multi VLAN's DHCP?
Replies: 2
Views: 249

Re: Multi VLAN's DHCP?

I use pppoe, one server per each Vlan, not bridging them. 600 users at the moment with CCR 1036. No connection tracking. Simple queues in radius profile. Works like a charm. Less than 10% CPU usage. Enviado desde mi Mi A2 mediante Tapatalk Thats really useful to know thank you. How do you find the ...
by dbeyzade
Mon Dec 28, 2020 6:50 pm
Forum: General
Topic: Multi VLAN's DHCP?
Replies: 2
Views: 249

Multi VLAN's DHCP?

A wholesale provider is handing over traffic using QinQ - with S-VLAN and C-VLAN IDs I am looking for the best way to terminate these connections using RouterOS. Is the only way to attach a PPPoE server, or DHCP server to each VLAN individually? How does this scale performance wise with several hund...
by dbeyzade
Sun Dec 27, 2020 6:43 pm
Forum: General
Topic: PPPoE Delegated-IPv6-Prefix BUG
Replies: 1
Views: 281

PPPoE Delegated-IPv6-Prefix BUG

Testing the new Delegated-IPv6-Prefix via PPPoE software version 6.48 First PPPoE authentication is successful - prefix is assigned from RADIUS When a second user dials up. There is an error: could not add dhcpv6 server with pool : server with such name already exists (7) This seems to stem from the...
by dbeyzade
Fri Oct 12, 2018 1:19 pm
Forum: General
Topic: IPsec slow download from server, upload fine
Replies: 1
Views: 579

IPsec slow download from server, upload fine

Hi, I have an RB1100x4, which I am trying to use as a VPN server. I am using IPsec SHA1 AES-256-CBC connecting with Windows 10 clients. The connections are establishing fine and everything is working. However when downloading via SMB3 from the server I am only achieving around 40-80mpbs of a 250mbps...
by dbeyzade
Fri Mar 02, 2018 3:20 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

Re: RB1100AHx4 latency spikes

Ports 1 - 6 are in use all at 1gbps full duplex - with the exception of port 2 which is at 100mbps full duplex. No errors, no drops
by dbeyzade
Fri Mar 02, 2018 10:41 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

Re: RB1100AHx4 latency spikes

Here is the graph - nothing odd I think
graph.PNG
by dbeyzade
Tue Feb 27, 2018 3:19 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

Re: RB1100AHx4 latency spikes

The default route is set to Gigaclear. I then have a script running that checks connectivity to this ISP and if it has failed marks this route higher that the 2nd ISP. What is the best way for checking for a CPU spike - a graph? You can enable graphics to the CPU, on the router itself. tools -> gra...
by dbeyzade
Tue Feb 27, 2018 3:18 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

Re: RB1100AHx4 latency spikes

With regards to dhcp renew, does the ip actually change? If not it means that a process will request extension, and process response, a pattern like so many running over the router. That in itself will not result in increased latency. No the addresses provided from each ISP never change - they are ...
by dbeyzade
Tue Feb 27, 2018 11:38 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

Re: RB1100AHx4 latency spikes

The default route is set to Gigaclear. I then have a script running that checks connectivity to this ISP and if it has failed marks this route higher that the 2nd ISP. There is other stuff connected to ports 3,4,5 so I think moving the Gigaclear connection over to port 13 is definitely worth trying....
by dbeyzade
Mon Feb 26, 2018 11:02 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

Re: RB1100AHx4 latency spikes

I do have around 30 firewall rules, plus NAT's to differnt PUBLIC IP addresses' for different subnets, and also connection tracking. Do you think all this could cause the problem? CPU usage is only showing 1 - 2 percent when I have inspected it
by dbeyzade
Mon Feb 26, 2018 10:59 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

Re: RB1100AHx4 latency spikes

Thanks for the help guys, The 1st ISP Gigaclear is connected to port 1 and the Second ISP AAISP / BT is connected to port 2. However both connections are not used at the same time, the second connection is only a backup so it's only used if the primary fails so I don't think its a switching chip pro...
by dbeyzade
Mon Feb 26, 2018 5:27 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 latency spikes
Replies: 18
Views: 2713

RB1100AHx4 latency spikes

Hi there, I have two completely independent internet connections fed into my RB1100AHx4. One is a 250mbps up down "gigaclear", the other is a 40mbps download 5mbps upload "BT" connection. In everyday use only the gigaclear connection is in use, the other is an on standby backup 2...
by dbeyzade
Sat Jan 06, 2018 11:15 am
Forum: General
Topic: IKEv2 PEAP - MS Always on VPN
Replies: 5
Views: 2305

IKEv2 PEAP - MS Always on VPN

Hi everyone, I have configured the new MS Always on VPN technology that uses RADIUS, Active Directory Certificate Services and Windows RRAS: https://docs.microsoft.com/en-us/windows-server/remote/remote-access/vpn/always-on-vpn/deploy/always-on-vpn-deploy-overview Apparently it is possible to use an...