MikroTik

djvolt1942

New model: viewtopic.php?f=7&t=128787&start=200#p704434

Rock solid stable on +1700m, iperf 940/940Mbps TCP/IP any decrease in transmission quality...

djvolt1942

No possibility to test >2000m at know, but we check is possible to find this distance :D We can also send with discount to them who test for us and share details after tests :) At now this is full outdoor products with RJ45 on the back of the dish :) The kit also fit for lhg5, lhg2, disc and ldf wit...

djvolt1942

ROS: 6.43.7 AP: tx=auto Station: tx=0 - alignment, tx=auto - checking, tx=36 we got perfectly center tx-sector 940Mbps TCP/IP all time We did not align the antennas on RSSI but on BTest and tx-sector The full bandwidth of 940Mbps TCP / IP, even at -65 RSSI, keeps the connection even on MCS1. Strange...

djvolt1942

I think yes, but now I dont know what they doing. 500Mhz would be better to send 2,3Gbps in PtP mode, 2000Mhz is for 10G and is available on IgniteNet 10G Omni

djvolt1942

The data are confidential at now but more info is here: https://wiki.mikrotik.com/wiki/Manual:Interface/W60G

djvolt1942

Symmetrical, this is phase array so depend on tx-sector [beamforming pattern]... At now is possible to make 0-63 tx-sector to find the highest power output point

djvolt1942

At first 1700meters tomorrow if weather will be good for tests

Devices are ready for tests

IMG_20181220_161548.jpg

djvolt1942

hehe

We have two solutions at this point

We preparing special adapter between precision or lhg standard mount and dish.

At now we have two feeders for 400 and 600mm dishes

All will be rock solid stable

djvolt1942

More details at now... Please tell me how to run a LAN cable, we have a hole 27mm at back of the dish, feeder have also the hole, maybe do you have back cable mount via feeder to LAN port of the LHG60 electronic? Maybe other solution? I'm waiting for answers and maybe solutions? :) where the hole d...

djvolt1942

More details at now... lhg60-600mm-1.jpg lhg60-600mm.jpg Please tell me how to run a LAN cable, we have a hole 27mm at back of the dish, feeder have also the hole, maybe do you have back cable mount via feeder to LAN port of the LHG60 electronic? Maybe other solution? I'm waiting for answers and may...

djvolt1942

Were sent yesterday with Shields and precision holders to our Business Partner

djvolt1942

lelelelelele

more info is it

From the other side...

https://trzepak.pl/viewtopic.php?f=26&t ... 45#p500245

djvolt1942

What is an antenna? the holder was made on a 3d printer. how much is this material resistant to sun and rain ? please more picture This is only for the tests, because we have second proposition that we preparing :P Mainly the material of the LHG60 holder will be made with ABS+UV. The whole electron...

djvolt1942

Some photo of project that is still modified

DSCF2690.JPG

DSCF2689.JPG

DSCF2687.JPG

djvolt1942

yes, no problems with NV2

djvolt1942

Eh... You dont understand, you dont see max capacity? Capacity = max thoughput in AC mode in UBNT so there is 134Mbps in 20MHz!!! Send me max thoughput and max capacity from LHG AC in 20MHz... I have two LHG AC, MT is shi*. in this point, this is my opinion. From the other side I have ALU dishes 400...

djvolt1942

lt400ac.jpg

djvolt1942

2,75KM, frequency 5500, signal -61, tx-power only -4dbm!!! The same result will be on other like 6KM but now I cannot do the test, because peoples downloading :P But now you see that on 20MHz can do 130Mbps, you cannot do the same on LHG AC :D and never will be :P Maybe you have only 50-60Mbpa at 20...

djvolt1942

IMG_20181129_154120.jpg

IMG_20181129_154052.jpg

djvolt1942

WoW really? :D At distance 7,2KM i will do 240Mbps real thoughput on 40MHz on pbe ac 500 :P LT400AC on distance 5KM can send 400Mbps real thoughput at 80MHz, 200Mbps at 40MHz and 100Mbps at 20MHz, it will be also option 50Mhz so it will be around 300Mbps :P Can AC from MT do this? I think NO, NO, NO...

djvolt1942

You are right, 802.11 is better, but now it can conect in nv2 and work Are you kidding? It is the end of 2018. We have AC hardware and you consider the 53 Mbit result to be good? With 40Mhz on P2P? :-) :-) Very bad, very bad... Also 5100 :lol: :lol: :lol: :lol: :lol: LT400AC: 2,85KM -65/-66 20Mhz, ...

djvolt1942

The same as in original LHG60, also is ALU cooling system

Our will be slightly different so there will be less interference

djvolt1942

The same as original dish from lhg60 so the same as our alu dish 400mm but with bigger dish 600mm, all the same f/D ratio

alu electronic holder because also will be use for system cooling...

djvolt1942

To all:

We started work on the 600mm set. We already have ready-made dishes, covers, we only have to make a special handle for electronics with LHG60 made of aluminum.

I will take photos next week ...

Who needs such upgrades and how many pieces? Please write to PM ...

djvolt1942

I think the fact that some radio energy might be diffracted due water drop on the dish or feeder is in no relation toward the attenuation due distance and especially if this distance has to be bridge through millions of rain drop where the dish and feeder will only have some... And shielding is not...

djvolt1942

You are wrong as many say so,..

if there is no water on the dish and radiator [feeder] means a much more stable link, because we have a very focused beam.

The same is how you set up a shield for powerbeam, it works much better and more stable than without a shield/radom...

djvolt1942

Yes, total 18 clients for 3 sectors with wAP60G, Todays max 200meters form Sector...

djvolt1942

1300meters and no lost connection? Wow, Ignitenet is very powerfull, we will have modification of this antennas with our dishes

P.S: which program generates such charts?

djvolt1942

First: It's not true, where you get it? We have only one in the world compatible with LHG60 and LHG5.

Second: Rain is not a big problem, Without radom snow kill any LHG's...

djvolt1942

Mimosa C5c is better thank MT or UBNT?

About LHG60 please check our dishes and radom or please check post like LHG60 on Hawaii, we have all for LHG60 that you write

djvolt1942

Why do not you believe in them?

djvolt1942

We have fantastic news for all... We have new products for Original LHG60 to improve stability and real distances: Hermetic enclosure: DSCF2544 — kopia.JPG DSCF2541 — kopia.JPG Only Radom: IMG_20180720_105811 kopia.jpg http://24.multimediahd.pl/pl/60ghz/105-wireless-wire-dish-alu-400mm-radom.html ht...

djvolt1942

LHG 5 AC the same, we're waiting for successfull improvements like in AirMax, PBE 300 ISO can send more than 250Mbps i 40MHz channel!!!

djvolt1942

LHG60: I think 15

wAP60: I think 5

djvolt1942

in CLI:

/interface w60g set wlan60-1 tx-power=1...15

djvolt1942

LHG 5 AC the same, ideal processor arm but max thoughput is -200Mbps Half Duplex

that mean completely doesnt work AC, N is rock stable and max is +160Mbps Half Duplex

UBNT 300 ISO AC +240Mbps Half Duplex on 40MHz

djvolt1942

I think you can connect LHG60 to same wAP60 with Licence 4 as AP

You must only change SSID and security password

djvolt1942

ok ok, the wAPs will be original with this or we will do something with original plastic case?

I think Aluminum will be much better than plastic...

Please send me price on PM

djvolt1942

This Horn is made from Plastic or Metal?

You can reach on this about 600m?

djvolt1942

Dear antonsb please answer for my email question about LHG60

Is it possible or not possible to get what I am asking for...

djvolt1942

E-Band like Siklu ETH v1200 works at 2500meters at 76GHz!!!.. 16GHz difference and only 500MHz width! WirelessRudy - do you have in Spain the Snowy days? :P If yes the standard LHG60 doesnt work :P That's why the first links are in Hawaii where there will never be snow... IgniteNet ML-60-35 is ok ma...

djvolt1942

Results on a rainy day: P Light rainfall ...

w60g_1421 — kopia.jpg

Rock stable at 1200m on the rain. The new antenna model has a box with a connector Keysotne or Krone at the back of the antenna, the front is completely enclosed with a draft radom shield

djvolt1942

w60g_1421 .jpg

Test in Rainy day, Light Rainfall, on 1200 meters link Rock Solid Signal 80 mcs 8 everytime
New model of aluminium antenna with draft shield on the front soon

https://www.youtube.com/watch?v=78On7sLnv_k
http://siec.multimediahd.pl/60ghz#400

djvolt1942

We use 58GHz for far link like 600, 800 meters

Lakis - shields for far links up to 300meters or better stability in snowy/rainy day, also for reduce SNR from wap to wap or MultiPoint...

djvolt1942

You should use our shields: http://24.multimediahd.pl/60ghz/2-shiel ... wap-s.html or: http://24.multimediahd.pl/60ghz/96-shie ... s-cnc.html

djvolt1942

wAP 60G by the google maps 238m distance. In good weather condition mcs: 4 signal: 40 rssi: -70 tx-sector: 28 tx-sector-info: left 3.8 degrees, down 3.8 degrees rx-sector: 96 In btest UDP have 600-800Mbps also have half hour with rain speed drop to 100Mbps in test. For now wating rain again to see ...

djvolt1942

I join the question, what exactly are we looking for? Stability at distances +200m on wAPs or a better signal?

djvolt1942

I have only 240Mbps RX TCP/IP on width 40MHz why?

Do you have perfect settings for AC on LHG or SXTsq?

djvolt1942

All in Europe: ETSI EN 302 217-2 = 06.2016 and ETSI EN 302 567 12.2016

djvolt1942

There is a test to show powerfull wAP as Sector 120 degree with station on 300mm bowl at distance ~300m, we made test product, but we dont show you yet

Presentations of this products will be soon...

djvolt1942

Our new test on our Sector 120 degree with special Shield and also Precision 300 Station [300mm with special precision holder to milimeter align HV]

3 points = https://www.youtube.com/watch?v=z6c4JrmGkk0 [to show 120 degrees]
400m = https://www.youtube.com/watch?v=BMWKk_TVtWw

djvolt1942

Our new test on our Sector 120 degree with special Shield and also Precision 300 Station [300mm with special precision holder to milimeter align HV]

3 points = https://www.youtube.com/watch?v=z6c4JrmGkk0 [to show 120 degrees]
400m = https://www.youtube.com/watch?v=BMWKk_TVtWw

djvolt1942

Our tests:

660m - https://www.youtube.com/watch?v=87kzOolah8A
1050m - https://www.youtube.com/watch?v=SR6lDmP49Q8

djvolt1942

wAP have 3 channels: 58, 60 nd 62 GHz so is possible to make 3 PtP links that will not interfere with other.

Also is possible to make PtP link and this same channel but the links must be parallel and can not cross

djvolt1942

We have full speed 1Gbps Full Duplex on 400m :P 500/500 on 650m and 300/300 on 1000m, on 1000m we have 914Mbps but only in Half Duplex in both directions not simultaneously, after some modifications etc we would like to reach 1200m and 1500m. We use all the time original wAP... Some peoples must hav...

djvolt1942

With two persons and walkie talkie or phone it is not hard to align to 1000m, we were looking for the signal about 4min on the both side, first horizontal on both side left-right, because our solution have about 20 degrees, next vertical with precision to the centimeter and correct horizontal, perfe...

djvolt1942

Dears

Our solution is finished.

Please check our website: http://siec.multimediahd.pl/60ghz#400

Products 300mm, 650mm and special wAP holder very soon.

At this time we preparing also Sector PtMP with special holder and housing for 120 degrees

Kind Regards

djvolt1942

Please send email to: office[at]multimediahd.pl

djvolt1942

I don't have spectral analysis so I can't do this, but I think about 20 degrees, because wAPs have 60 degrees and we have more free space to align this antenna for 600 meters.

Antenna is renew NanoBridge 400m with more modifications.

djvolt1942

Yes, testing model: https://trzepak.pl/viewtopic.php?p=480703#p480703

Final product will be with 8 year guarantee for protection without rust and some modifications.

djvolt1942

Nice tests but LHG and XL are not prepared for 60GHz, The construction isn't stable... We have final product, but actually not yet prepared, we complete other spare parts to start production :) Our product will cost 860 USD at now... We accept orders. If anyone is interested in purchasing our produc...

djvolt1942

Actually No :P Link with this hack only for 300m distance and problem on windy/rain day all time :) Our solution is finished. Please check our website: http://siec.multimediahd.pl/60ghz#400 Products 300mm, 650mm and special wAP holder very soon. At this time we preparing also Sector PtMP with specia...

djvolt1942

server8 - actually no

djvolt1942

We have our own patent :P Actually we make link for 850 meters with signal 40-60, at 500m we have signal 100-80, tomorrow we must test it for 1km and more :P For NORMIS and MT Support: PLEASE MAKE LED SIGNAL IN STATUS PAGE !!! http://host.multimediahd.pl/MT/LED.jpg Please see attached, please make t...

Search found 64 matches