MikroTik

lilw

The mangle would be ok if it works on v6. In v7, I think you should take a look in IP/Route. In my situation, with 2 working pppoe, I only need to remove ping in check gateway and add 2 rules into Rules table, and it works now.

lilw

Today I upgraded to v7.1 and find out my network can't access internet with my route config. After a while with some suggestion around this forum, I find that I will need to fix the route, add 2 rules to the route/rules, edit the routes table without ping in check gateway. So it actually works right...

lilw

It has been a long time I didn't update winbox from v3.24. Today I updated winbox to latest and find out that the disk item won't show USB drive plugs in my hap ac2. I reinstall the winbox v 3.24 it reappears again. Apparently it is v3.27 bugs. And there is one more thing I really don't get it that ...

lilw

Mikrotik should implement a simple data usage so it can monitor data traffic. The splunk is a very complicated one.

lilw

I came here because I can't install the dude on hap ac2 caused of small flash. I want to monitor my network usage of day, month,... And the solution is use the dude. I think mikrotik should implement other ways to monitor the network here. The graphing tools is very limited.

lilw

I have just figured something out. If I leave the address look like ::/64 for both, one of them will disappear, but then I add address to one of them like ::192.168.1.1/64 then it will be fine.

lilw

I'm using internet from 2 ISPs, both of them offers PPPOE and Dual stack for IPV6. One of them have a problem with IPV6 configuration from their NOC, I tried to explain but got refused by them because I'm just a normal user. Recently, a company implement ipv6 for their network and got a problem like...

lilw

I got the same problem here in my country, Using FTTH from Viettel. I noted them with the issue that some sites I can ping but can't access via IPV6. But their answer kind of claim their customer is dumb to work thing out. At the begining, I asked them to bridge my mikrotik but it take them a week t...

lilw

If it were that easy, we would have done it :) I know you guys will need to rewrite it from scratch for x64 support and for Mac too. But that is something to consider. An app for MAC to run natively I think it can be possible since Mikrotik is well-known company. I'm one of Mac user that bring my M...

lilw

So everyone came here for x64 support on mac. Why don't just make a 64bit winbox for mac rather than stick to the windows version? It would be more beautiful in design, and run natively in mac it would be faster then run from wine.

lilw

This puzzles me as it's different if configured through capsMan than if it's configured directly on device. But it works for me if I set up like this: /caps-man channel add band=2ghz-g/n control-channel-width=20mhz extension-channel=XX <and the rest of settings like frequency list etc.> This way de...

lilw

I have cAP for couple months, I've setup it with CAPsMAN. At that time my ISP internet is only 30mbps so I test it and got around there so I didn't care much. But then, I upgraded to 200mbps internet and I found that my cAP is always around 30mbps. I hardly choose 40Mhz for my cAP because it will ge...

lilw

Ok, I just realize that this lagging causing because of the hardware limitation, it is because of the 100mbps port and my internet is 100mbps too, so it causing bottleneck when all of the bandwidt of internet is used, there is nothing left for IPTV streaming.

lilw

I monitor in Profile, and I see CPU around 20%, networking 10%, other process around 5% or less. Still not figure out where problems happen.

lilw

Yeah it works, but not perfect. I will still looking into VLAN filtering because right now I experience lagging with IPTV when network have traffic over 30Mbps.

lilw

Hey, Thanks for the suggestion of VLAN filtering. It great but it would eat CPU a lot, like 40%. I can stream IPTV now, but lost internet access over the ether3 trunk. I think I can play around with my LEDE router for internet to work again, but you know what, my kid need me babysitting him and I wa...

lilw

May I ask, will vlan-filtering in bridge consume much CPU? It just a home network so I try to keep my CPU low. Thanks for the tutorial, I inspect it now. Need to learn a lot of this network stuff. I don't know how things will work on your hAP ac. When I did tests on my RB951G (has slower CPU) it co...

lilw

As far as I play around with ONU modem, I found that I just need to tag vlan 2502 and mapping LAN ports on the ONU for IPTV to works. So it expects tagged data. I prefer this configuration with ONU, but since last topic about 100Mbps internet. I has ordered a 1Gbps ONU and it only has 1 port. This i...

lilw

Yes, here it is. # may/20/2019 17:55:28 by RouterOS 6.44.3 # software id = # # model = RouterBOARD 962UiGS-5HacT2HnT # serial number = /caps-man channel add band=2ghz-g/n control-channel-width=20mhz frequency=2437 name=channel11 /interface bridge add admin-mac=CC:2Dxxx auto-mac=no comment=defconf na...

lilw

Hi again, So I’m around here quite sometimes. I still learning and facing a lot of problem with my own decision and tried to solve most of them. I have a hAP ac. My ISP give me 2 VLANs, VLAN35 for internet with pppoe and VLAN2502 for IPTV. I have 2 TVs. Here is my config at the moment. # may/20/2019...

lilw

Also you should note that when the ISP gives you a 100 Mbps connection, what they mean is there will be 100 Mbps at the lowest network layer. (sometimes not even that, in the past here when getting an ADSL line the specified speed would be the ATM line rate which is even a lower layer) All layers a...

lilw

hAP ac is no beast, its CPU might be a bottleneck here. Run tools->profile while tranfering data from/to internet full speed. Check which processes consume most CPU cycles. I don't see anything in firewall rule list to improve performance. Beware, though, that IPv6 is not fast-tracked meaning IPv6 ...

lilw

@lilw: if what you posted is really full config, then your router is wide open for hackers from WAN. As SRC-NAT is not in posted configuration, I kinda doubt this is whole config ... making it hard to provide any useful comment .... I’m sorry. The default config including firewall for both ipv4 and...

lilw

@lilw: if what you posted is really full config, then your router is wide open for hackers from WAN. As SRC-NAT is not in posted configuration, I kinda doubt this is whole config ... making it hard to provide any useful comment .... I’m sorry. The default config including firewall for both ipv4 and...

lilw

Hi, I checked with several users, and I think that because I can only use internet on 100Mbps ports, that is the reason why I hardly reach 100Mbps. Those users only use ONU to pppoe so TR069 allow them to use LAN1 as gigabit for their end. They always have over 100Mbps when testing. This is my confi...

lilw

Hi, Recently I upgrade my Internet speed to 100Mbps, I speedtest it with local server in my country, the speed only reach maximum over 90Mbps, not even close to 100Mbps. So what should I do now to improve the speed. FYI: My ISP use GPON, and I bridged there ONU modem so Mikrotik will do the pppoe. A...

lilw

Excuse me, can you guide me with this script, I have no idea how to make it right for my config. Do I need anything else in the ppp config or just insert those line of script? This script is supposed to go into the ppp-profile for your connection. You can just copy and paste it as is (if you use We...

lilw

I think different ISP give different way to get ipv6. With my ISP Viettel (Vietnam). I just need to setup ipv6 dhcp-client and address. It all up now. But the bug is when my pppoe disconnect, the dhcp-client can't rebind. I need to release it manually.

lilw

This workaround works for me. Create an on-up script under the PPP profile. This will force a release (and subsequent renewal). This is mine: :local interfaceName [/interface get $interface name]; :delay 10 :log info "profile-pppoe-isp client up: ipv6 dhcp-client release"; /ipv6 dhcp-clie...

lilw

So, you could try to put the IP 192.169.1.2/24 on the Ethernet where you connect for pppoe. It probably works too, but be careful to not put the IP on the interface pppoe, it need to be on the Ethernet interface Sent from my Vivo XI+ using Tapatalk Yes, that is what I tried at first. But it is not ...

lilw

So, you could try to put the IP 192.169.1.2/24 on the Ethernet where you connect for pppoe. It probably works too, but be careful to not put the IP on the interface pppoe, it need to be on the Ethernet interface Sent from my Vivo XI+ using Tapatalk Yes, that is what I tried at first. But it is not ...

lilw

Your ONU only have 1 Ethernet? If it have two you connect two cables on that one for internet and other for management :D Sent from my Vivo XI+ using Tapatalk My GPON have 4 ethernets, but the first 2 ports has it own config from ISP, and I can only reach 70% my internet speed with them. So I assum...

lilw

[edit] Just struck me ... I can see that you're running PPPoE client on vlan interface. Try to move 192.168.1.2 IP address from ether1-WAN to vlan35 interface and see if this makes any difference. Thanks again, I tried it too but it is not working. It stated the same unknown0. Let's try to help you...

lilw

Thanks for lighting me up. I appreciate your time with me.

lilw

I can't ping from hAP ac. BTW, my gpon modem DHCP is on, so I tried to setup DHCP client on mikrotik eth1 but it won't have the IP. If I connect my PC with GPON wifi, it get an IP. You are right, my configuration is a messed. I think I should spend sometimes with it. Can you offer me some good firew...

lilw

Thank you for your help, but I still can't ping the 192.168.1.1. Everything I did, I suppose it to work already but it still not. Most of my firewall rule is the default from Factory. I use mikrotik for home only since my linksys EA3500 wifi fault. My network is simple: GPON modem (bridge) --- Mikro...

lilw

Hi, I follow some guides in the internet and now I think that I really messing up with the config. Here is my config of the mikrotik. # mar/19/2019 21:54:18 by RouterOS 6.44.1 # software id = xxxx # # model = RouterBOARD 962UiGS-5HacT2HnT # serial number = xxxx /caps-man channel add band=2ghz-g/n co...

lilw

I have a hap ac router. My ISP run internet and IPTV on VLAN. I configured mikrotik run pppoe on VLAN on eth1 which is connect to LAN port of the GPON modem, GPON modem turn in to bridge mode. The IP address of 2 devices are: Mikrotik: 100.10.10.0/24 GPON Modem: 192.168.1.1 Now I want to access GPON...

Search found 38 matches

Re: Help needed to translate PCC routerOsV6 firewall mangle to routerOsV7

Re: how to PCC in version 7?

Re: WinBox v3.27 released!

Re: Feature Request: Data usage

Re: hAP ac (and some other new rotuers) too small flash

Re: IPV6 Address disappear after a reboot of router

IPV6 Address disappear after a reboot of router

Re: [SOLVED] IPv6 pings work, webpage won't load

Re: Winbox 64bit Version

Re: Winbox 64bit Version

Re: Mikrotik WLAN & CAPsMAN - Bad download perfomance

Re: Mikrotik WLAN & CAPsMAN - Bad download perfomance

Re: Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Re: Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Re: Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Re: Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Re: Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Re: Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Re: Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Can WAN with multiple VLAN will work with trunked port for Internet and IPTV?

Re: Can mikrotik get all the bandwidth of 100Mbps internet from ISP?

Re: Can mikrotik get all the bandwidth of 100Mbps internet from ISP?

Re: Can mikrotik get all the bandwidth of 100Mbps internet from ISP?

Re: Can mikrotik get all the bandwidth of 100Mbps internet from ISP?

Re: Can mikrotik get all the bandwidth of 100Mbps internet from ISP?

Can mikrotik get all the bandwidth of 100Mbps internet from ISP?

Re: IPv6 PPPoE+DHCPv6 Client Pool Rebind BUG

Re: First time setting up IPv6

Re: IPv6 PPPoE+DHCPv6 Client Pool Rebind BUG

Re: [Help] Access Bridged GPON modem in front of Mikrotik

Re: [Help] Access Bridged GPON modem in front of Mikrotik

Re: [Help] Access Bridged GPON modem in front of Mikrotik

Re: [Help] Access Bridged GPON modem in front of Mikrotik

Re: [Help] Access Bridged GPON modem in front of Mikrotik

Re: [Help] Access Bridged GPON modem in front of Mikrotik

Re: [Help] Access Bridged GPON modem in front of Mikrotik

Re: [Help] Access Bridged GPON modem in front of Mikrotik

[Help] Access Bridged GPON modem in front of Mikrotik