Community discussions

Search found 30 matches

by PsYcH
Wed Oct 02, 2019 4:53 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

So yes, you were totally right, fixed routes and now everything works like charm without extra masquarade rules. Thank you!
by PsYcH
Wed Sep 25, 2019 6:28 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

The first rule looks like it should accept everything. So if it's not firewall, another explanation would be wrong default gateway on server. It needs to be this router. So you are right, the gateway is set to 0.0.0.0, but interesting thing is, that I have DHCP set to on for server network card, an...
by PsYcH
Wed Sep 25, 2019 10:03 am
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

So been busy these days, checked the firewall from server side, dont know hom much you guys are familiar with Unix systems, but here is my rule for port 2222 in 192.168.1.203
Image
Image
by PsYcH
Fri Sep 20, 2019 5:09 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

Actually, it means something different. If there was already this: add action=masquerade chain=srcnat comment="HAIRPIN NAT" dst-address=192.168.1.0/24 src-address=192.168.1.0/24 and it made connections from inside work (it should, because it's correct hairpin NAT rule), but connections from outside...
by PsYcH
Thu Sep 19, 2019 12:29 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

What if you temporarily add this rule? /ip firewall nat add action=masquerade chain=srcnat comment="TEMP" dst-port=2222 protocol=tcp dst-addresses=192.168.1.203 It will change source of all packets going to 192.168.1.203:2222, so that it will be router's internal address, same as it is when connect...
by PsYcH
Thu Sep 19, 2019 11:09 am
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

Everything looks like it should work. I'd do some things differently, but that's not the problem now. I skimmed through older posts and if you still have my logging rules and you do see steps 1 and 2, but do not step 3, it would be problem with server not responding. So a step back, what was the or...
by PsYcH
Wed Sep 18, 2019 4:05 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

The public address routerWAN_IP is directly on this router (you'd see it in IP->Addresses), not on some other router, modem or whatever, right?
yes, correct, we get this IP directly through our ISP by WAN (eth1) port.
by PsYcH
Wed Sep 18, 2019 1:20 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

You do not need both of these rules. add action=dst-nat chain=dstnat dst-address=routerWAN_IP dst-port=2222 protocol=tcp to-addresses=192.168.1.203 add action=dst-nat chain=dstnat comment="2222 from external" dst-port=2222 protocol=tcp to-addresses=192.168.1.203 If you are resolving by hostname int...
by PsYcH
Wed Sep 18, 2019 9:24 am
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

That was clearly the problem that i missed that part about destination IP and it`s quite logic :) Thank you! Now from LAN i can resolve with my external IP, BUT, now I can`t reach it from external network. The irony being that the DDNS/Address List part is in reference to directing to the dst-addre...
by PsYcH
Tue Sep 17, 2019 6:45 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

if heard right, he says that i`m finished if i do have static public IP Try watching further the entire video, it needs the port forward rules creating PROPERLY to work. He / I am quite sure if done properly it will work. Wont get it how adress list can help with hairpin. I have did as he shows wit...
by PsYcH
Tue Sep 17, 2019 12:31 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

if heard right, he says that i`m finished if i do have static public IP Try watching further the entire video, it needs the port forward rules creating PROPERLY to work. He / I am quite sure if done properly it will work. Wont get it how adress list can help with hairpin. I have did as he shows wit...
by PsYcH
Sat Sep 14, 2019 12:23 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

ok so I have added the rule to the top of my NAT rules: add action=masquerade chain=srcnat comment="Hairpin" dst-address=\ 192.168.1.0/24 src-address=192.168.1.0/24 and it`s not working You clearly haven't done everything it says to then. There is more than just 1 line of srcnat. if heard right, he...
by PsYcH
Fri Sep 13, 2019 5:08 pm
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Re: Hairpin not working

Modify this to work as you need it: https://www.youtube.com/watch?v=_kw_bQyX-3U (Shameless plug but it DOES work) ok so I have added the rule to the top of my NAT rules: add action=masquerade chain=srcnat comment="Hairpin" dst-address=\ 192.168.1.0/24 src-address=192.168.1.0/24 and it`s not working
by PsYcH
Thu Sep 12, 2019 11:43 am
Forum: Beginner Basics
Topic: Hairpin not working
Replies: 30
Views: 2911

Hairpin not working

Hello, so trying to make hairpin in my network for port 2222 which runs on IP 192.168.1.203, but just cant make it work.... Here is my rules: add action=dst-nat chain=dstnat comment="testinis 2222" disabled=yes dst-port=\ 2222 in-interface=bridge1 protocol=tcp src-address=192.168.1.0/24 \ to-address...
by PsYcH
Thu Sep 12, 2019 11:22 am
Forum: General
Topic: RBM33G can`t connect winbox neither by IP
Replies: 9
Views: 600

Re: RBM33G can`t connect winbox neither by IP

Hmmm, try to use RS232 serial port !
Actually going to bring it back to reseller, and try to manage this with him. I`ll update later what was the issue.
by PsYcH
Mon Sep 09, 2019 6:17 pm
Forum: General
Topic: RBM33G can`t connect winbox neither by IP
Replies: 9
Views: 600

Re: RBM33G can`t connect winbox neither by IP

Is there plugged any additional peripheral devices - wifi, Lte pci-e card or usb etc...If answer is Yes, remove them and try again .
It was, but before I created the forum topic, I have disconnected all other peripherals (it was LTE PCI-E)
by PsYcH
Mon Sep 09, 2019 3:38 pm
Forum: General
Topic: RBM33G can`t connect winbox neither by IP
Replies: 9
Views: 600

Re: RBM33G can`t connect winbox neither by IP

If you have a firewall on the computer or laptop disable this. If nothing works try to recover your Mikrotik router with netinstall. https://www.wirelessinfo.be/mikrotik-netinstall/ Greatings That was a good point with firewall, but it didn`t work. Netinstall can`t find device too, tried on two dif...
by PsYcH
Fri Sep 06, 2019 11:32 am
Forum: General
Topic: RBM33G can`t connect winbox neither by IP
Replies: 9
Views: 600

Re: RBM33G can`t connect winbox neither by IP

Reset the router and try again !
Already did this, holding reset button when starting the router, green led starts flashing, that letting reset button.
by PsYcH
Fri Sep 06, 2019 10:04 am
Forum: General
Topic: RBM33G can`t connect winbox neither by IP
Replies: 9
Views: 600

RBM33G can`t connect winbox neither by IP

Hello, I have already configured a few mikrotik routers and want to try RBM33G, but cant connect to it. Power supply which I use is 24V 800mA, when i plug it, i see both green and blue led on, after few seconds only blue led stays lit, when trying to find router with winbox by neighbors section, not...
by PsYcH
Tue Apr 30, 2019 2:46 pm
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

Re: L2TP NAT LAN

Guys, any ideas? There is no Mikrotik geeks with muscular brains? :)
by PsYcH
Wed Apr 17, 2019 10:14 am
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

Re: L2TP NAT LAN

Anyone? If I make the VPN client computer appear in the same network 192.168.1.0/24 it wont let me ping the 192.168.1.0/24 devices EDIT: Ok, I have made it work in internal ip with NAT rule to masquarade, Chain: srcnat Src. Address: 192.168.1.0/24 Dst. Address: !192.168.1.254 Action: masquerade But ...
by PsYcH
Fri Apr 12, 2019 10:12 am
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

Re: L2TP NAT LAN

Ok, just another question, is it possible somehow set up VPN, that it`s network would be in same subnet? Or maybe, I could trick the system communication with NAT? When I set up the VPN, I have to write remote and local addresses, so maybe it`s possible to make the system to think that I`m in same L...
by PsYcH
Thu Apr 11, 2019 10:54 am
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

Re: L2TP NAT LAN

Just contacted the software support, and they said that program wont support such thing like client and server communication in different subnets. So thank you very much!
by PsYcH
Wed Apr 10, 2019 9:23 am
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

Re: L2TP NAT LAN

Hello, I have already did it :) Here is the SS, but it doesn`t work anyways.
FW.PNG
by PsYcH
Tue Apr 09, 2019 4:08 pm
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

Re: L2TP NAT LAN

What do you mean "accept all connections", like not only tcp but also udp?
by PsYcH
Tue Apr 09, 2019 12:07 pm
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

Re: L2TP NAT LAN

Hello, The kind of NAT most used is to Access Internet from internal computer (For example), I Will try to explain you why is it: Supose the following: -A machine in your network is trying to access to www.facebook.com -The machine got the IP address of www.facebook.com from its DNS servers or cach...
by PsYcH
Mon Apr 08, 2019 12:10 pm
Forum: Beginner Basics
Topic: L2TP NAT LAN
Replies: 12
Views: 834

L2TP NAT LAN

Hi all, let`s try to explain my problem. Task: There is 2 computers, one runs program as a server, other connects to the program as a client to show some data. Client computer sometimes is away but still wants to see data, but also we want to stay safe. For communication between client and server pr...
by PsYcH
Fri Feb 02, 2018 9:48 am
Forum: General
Topic: DMZ on ETH5
Replies: 4
Views: 396

Re: DMZ on ETH5

Thank you very much for your response! I`ll try it soon and let you know about my progress.
by PsYcH
Thu Feb 01, 2018 10:30 am
Forum: General
Topic: DMZ on ETH5
Replies: 4
Views: 396

Re: DMZ on ETH5

As I`m new to Mikrotik, could you explain it more detaily how to make your example to work? Thank you very much!
by PsYcH
Mon Jan 29, 2018 2:50 pm
Forum: General
Topic: DMZ on ETH5
Replies: 4
Views: 396

DMZ on ETH5

Hello guys, I have RB750GR3 Router, What I have is Master network on ETH2 (as ETH1 is WAN) where all the devices is connected, but I would like to make the DMZ on ETH5 or any other port, so that ETH2 network could connect to ETH5 but not vice versa. Tried to achieve it with firewall rules, but it ju...