Community discussions

Search found 35 matches

by amity2kare
Sun Nov 18, 2018 3:26 pm
Forum: General
Topic: ISP Setup
Replies: 4
Views: 603

Re: ISP Setup

Hi,

PM me and I'll help you.

Regards

Amit
by amity2kare
Sun Nov 18, 2018 3:00 pm
Forum: Scripting
Topic: BGP Alert on Email
Replies: 1
Views: 358

Re: BGP Alert on Email

by amity2kare
Sun Nov 18, 2018 2:38 pm
Forum: RouterBOARD hardware
Topic: NetInstall Instructions
Replies: 8
Views: 2433

Re: NetInstall Instructions

Hi, I've been working with mikrotik devices since 1998 and have done a lot of netinstalls. One thing I can say for sure and concur with the statements above, the process is a bit iff-ish. Since the last couple of months there have been a few devices I have tried to netinstall and it just won't work....
by amity2kare
Thu Aug 16, 2018 3:34 pm
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 23469

Re: Blacklist Filter (Development Topic)

Hi Dave, I agree with everyone when I say the beta should not be restricted just because one guy decided to go another route. We would be most happy to pay and I would happily be a part of your beta program and even get my clients on board just because it saves them money they would instead spend on...
by amity2kare
Mon Apr 23, 2018 9:58 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 102490

Re: Blacklist Filter update script

@IntrusDave you can count me in for the paid service. The feature list sounds good. Do let us know on this thread and we'll be most happy to do beta testing for you.
by amity2kare
Sun Mar 25, 2018 9:24 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 102490

Re: Blacklist Filter update script

Thanks Dave,

It's people like you who keep the community alive with their contributions. Best of luck with your new role.

Regards
by amity2kare
Wed Mar 21, 2018 5:41 pm
Forum: General
Topic: ❓ what's the best solution for OSPF and PPPoE service
Replies: 30
Views: 4518

Re: ❓ what's the best solution for OSPF and PPPoE service

I'm reviving this discussion to get answers to a few of my queries since I'm deploying this architecture for a client now. Is it possible to set up this network without VPLS? Is it possible to setup individual PPPoE IP pools for each site? What do we do if we need to forward ports for a client with ...
by amity2kare
Mon Jan 22, 2018 2:35 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 102490

Re: Blacklist Filter update script

Script works fine at my end. However the address list entries (IntrusBL) disappear in a couple of hours. I have been noticing this behavior since i installed this script and have tried upgrading my routeros version as well but to no avail. My current config is routeros 6.39.3 on CCR1072-1G-8S+. Any...
by amity2kare
Thu Jan 18, 2018 10:25 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 102490

Re: Blacklist Filter update script

Script works fine at my end. However the address list entries (IntrusBL) disappear in a couple of hours. I have been noticing this behavior since i installed this script and have tried upgrading my routeros version as well but to no avail. My current config is routeros 6.39.3 on CCR1072-1G-8S+.
by amity2kare
Fri Dec 15, 2017 1:22 pm
Forum: Scripting
Topic: Laod Balancing 2 Wans
Replies: 1
Views: 301

Re: Laod Balancing 2 Wans

Hi,

This is the wrong forum for this query.

As a solution, please search PCC and use-cases/examples for the same and you'll have your answer.

Regards
by amity2kare
Fri Dec 15, 2017 12:58 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 102490

Re: Blacklist Filter update script

@IntrusDave

Brilliant script. Worked on my CCR1072 from the word go. Karma from my side.

Regards
by amity2kare
Fri Dec 15, 2017 12:13 pm
Forum: General
Topic: SCRIPT: Dual WAN Load Balancing with Fail-over
Replies: 27
Views: 91757

Re: SCRIPT: Dual WAN Load Balancing with Fail-over

sir i use many scripts , i don't have a deep knowledge of mikrotik , so please help me about my problem , sir when i do loadbalancing always my wan1 active not both , but when wan1 failed then wan2 come to work , sir what problem can b in it , where to find solution of it , sir how to be possible t...
by amity2kare
Mon Dec 11, 2017 10:40 am
Forum: Forwarding Protocols
Topic: ISP Network Extension to another city
Replies: 4
Views: 867

Re: ISP Network Extension to another city

Hello we are a small ISP with 500 Customers but now we are extending our network to nearby city B which is 100 km away from HQ. so we brought L2 PTP Transit from our upstream provider they provided us a physical port in each city. now i am not much familiar with MPLS or any L2 Tunneling method . Pl...
by amity2kare
Mon Dec 11, 2017 10:20 am
Forum: General
Topic: SCRIPT: Dual WAN Load Balancing with Fail-over
Replies: 27
Views: 91757

Re: SCRIPT: Dual WAN Load Balancing with Fail-over

sir i use many scripts , i don't have a deep knowledge of mikrotik , so please help me about my problem , sir when i do loadbalancing always my wan1 active not both , but when wan1 failed then wan2 come to work , sir what problem can b in it , where to find solution of it , sir how to be possible t...
by amity2kare
Mon Sep 25, 2017 4:56 pm
Forum: The Dude
Topic: New device that supports The Dude server package: RB750r3 hEX [SOLVED]
Replies: 86
Views: 14181

Re: New device that supports The Dude server package: RB750r3 hEX [SOLVED]

No @krisjanis I have not opened a support ticket. I had just mentioned this issue on this forum in the hope someone else had faced this as well and hoping to find a solution from the community.
by amity2kare
Mon Sep 25, 2017 4:53 pm
Forum: General
Topic: Mikroitk BGP Dual Loadbalancing problems
Replies: 1
Views: 403

Re: Mikroitk BGP Dual Loadbalancing problems

What exactly are you tryig to achieve? If you need simple load balancing, maybe you should try advertising all 4 pools to both Voda and Idea and using prepend to balance traffic. Maybe if you explained your requirement in some more details, we could help.
by amity2kare
Mon Sep 25, 2017 2:58 pm
Forum: General
Topic: how to access mikrotik router behind trunk port
Replies: 2
Views: 496

Re: how to access mikrotik router behind trunk port

A suggestion would be to add the vlan interface on the physical interface connected to the cisco switch so packets originating from that vlan are tagged. That would at least get the packets to your mikrotik. Further configuration for customers connected to the mikrotik is another part of the config ...
by amity2kare
Mon Sep 25, 2017 1:55 pm
Forum: Beginner Basics
Topic: Dual ISP load balance with public ip
Replies: 2
Views: 541

Re: Dual ISP load balance with public ip

Hi Chandas,

This can be easily done using BGP. We specialize in one-time setup and ongoing support for small to medium sized cable-ISPs. Please PM me in case you need further help.

Regards

Amit
by amity2kare
Mon Sep 25, 2017 1:30 pm
Forum: The Dude
Topic: New device that supports The Dude server package: RB750r3 hEX [SOLVED]
Replies: 86
Views: 14181

Re: New device that supports The Dude server package: RB750r3 hEX [SOLVED]

@normis, I've had to refund the cost of the 750gr3 to my clients and take back the units and they're lying with me as dead stock. The dude data just disappears every few days. Has your team had an opportunity to reproduce the error at your end? It's been close to 45 days since I posted this issue an...
by amity2kare
Wed Aug 02, 2017 10:19 pm
Forum: The Dude
Topic: New device that supports The Dude server package: RB750r3 hEX [SOLVED]
Replies: 86
Views: 14181

Re: New device that supports The Dude server package: RB750r3 hEX [SOLVED]

I have purchased 2 750gr3 for my clients to run dude and I'm facing the same issue with both. After a few days, the map with all the devices just vanishes and the whole thing needs to be recreated. I've tried an SD card and a flash drive. Same issue on both mediums and both routers. I've tried all v...
by amity2kare
Sat Apr 15, 2017 3:43 pm
Forum: RouterBOARD hardware
Topic: 750Gr3 goes dead after removing packages
Replies: 3
Views: 784

750Gr3 goes dead after removing packages

This has happened with two routers I have purchased this month. The router came with 6.36.1 and I upgraded it to 6.38.5 which is the current version and uploaded dude.npk for this specific version. I upgraded by uploading specific packages to the router, not the routeros file. The packages I uploade...
by amity2kare
Fri Feb 24, 2017 8:48 pm
Forum: General
Topic: Need Load balancing between two routers with multiple links
Replies: 2
Views: 576

Re: Need Load balancing between two routers with multiple links

Hi,

We have done the same thing in our setup. I used simple ECMP by specifying multiple gateways in the default route. Worked well for me.
by amity2kare
Sun Nov 20, 2016 3:40 pm
Forum: Forwarding Protocols
Topic: BGP Multihoming
Replies: 10
Views: 3169

Re: BGP Multihoming

Anyone?
by amity2kare
Sat Nov 19, 2016 11:23 pm
Forum: Forwarding Protocols
Topic: Load Sharing BGP
Replies: 5
Views: 1518

Re: Load Sharing BGP

I have the same query and I have tried everything mentioned on the wiki and the forums but I am hitting a roadblock. Only one of the links stays active because default routes received from both ISPs have the same distance and only one of them stays active. I have 3 clients running an identical setup...
by amity2kare
Sat Nov 19, 2016 10:36 pm
Forum: Forwarding Protocols
Topic: BGP Multihoming
Replies: 10
Views: 3169

Re: BGP Multihoming

There seems to be a misunderstanding here.

1. Both ISP A and ISP B are connected to one router at my NOC and they are my upstream ISPs so they are different ASNs and hence are not connected to each other via iBGP.
2. The /30 ip address blocks to connect to both the ISPs are provided to me by the ISPs
by amity2kare
Fri Nov 18, 2016 4:40 pm
Forum: Forwarding Protocols
Topic: BGP Multihoming
Replies: 10
Views: 3169

BGP Multihoming

Hi, We have a link from 1 ISP running BGP and we have advertised 4 x /24 over this ISP. Now we are adding a second ISP and need to multihome with the following conditions. Both ISP links will be used at the same time. It will not be a failover configuration, but a load-balancing one. I have read thr...
by amity2kare
Mon Oct 03, 2016 6:01 pm
Forum: Forwarding Protocols
Topic: Mikrotik equivalent of the AS-SET command
Replies: 7
Views: 1931

Re: Mikrotik equivalent of the AS-SET command

Thanks all for your contributions, The downstream customer finally installed a separate router for the second uplink from me and things are working fine as I had configured them initially with an aggregate for his prefixes. I know it's not a very graceful solution but it's working without a hitch no...
by amity2kare
Fri Sep 16, 2016 7:04 pm
Forum: Forwarding Protocols
Topic: Mikrotik equivalent of the AS-SET command
Replies: 7
Views: 1931

Re: Mikrotik equivalent of the AS-SET command

Thanks zagziggy but as_monkey is correct. Ill explain in slightly greater detail so you understand better. I am an ISP with an upstream provider and I've advertised my prefixes (/22) which is fine as my direct clients' services are working fine. No issues there whatsoever. Another company has peered...
by amity2kare
Thu Sep 15, 2016 11:32 pm
Forum: Forwarding Protocols
Topic: Mikrotik equivalent of the AS-SET command
Replies: 7
Views: 1931

Mikrotik equivalent of the AS-SET command

Hi, My company is connected to an upstream ISP and have announced a /22 prefix. We peered with a customer who has his own ASN and his own /22 prefix which he has advertised to us. Our downstream customer's traffic is still going through his earlier provider and not through the link we have provided ...
by amity2kare
Mon Oct 08, 2012 10:04 pm
Forum: The Dude
Topic: Dude Agent, Again
Replies: 8
Views: 7274

Re: Dude Agent, Again

If you simply connect with the windows Dude program to a RouterOS Dude installation remotely, that's fine. But you could have a local server, with local devices on it, and then use the RouterOS Dude install as agent, to monitor devices that are not directly reachable from your local server. | -----...
by amity2kare
Wed Oct 03, 2012 12:42 pm
Forum: General
Topic: PPPoE Queues not limiting traffic
Replies: 1
Views: 420

PPPoE Queues not limiting traffic

Hi, We have been using Mikrotik Routerboards as NAS on various sites with a Radius server at the backend. I am facing this issue on one of the sites where we are using an RB450G as the NAS. The dynamic queues generated when a user logs in is proper but users tend to overshoot their allotted quota eg...
by amity2kare
Wed Oct 03, 2012 12:36 pm
Forum: General
Topic: dynamic simple queue using PPPOE and NAT problem
Replies: 4
Views: 1052

Re: dynamic simple queue using PPPOE and NAT problem

i disabled ip firewall on bridge and solved! :D
I have the same problem on my RB450G S/W ver 5.20. Issue is that the Use IP Firewall is already disabled by default but I'm still facing this issue. Any help would be greatly appreciated.
by amity2kare
Thu Aug 23, 2012 5:53 pm
Forum: Beginner Basics
Topic: transparent bridging
Replies: 4
Views: 1441

Re: transparent bridging

You can use bridge filter to achieve this scenario. http://wiki.mikrotik.com/wiki/Bridge. Simply accept all necessary dst. and src. MAC addresses and drop the rest of the traffic. Dear Kirshteins,thank you very much for taking the time to assist,i am sorry for this trouble but i am quite new to mik...
by amity2kare
Wed Mar 07, 2007 11:38 am
Forum: General
Topic: --- RouterOs 2.9.40 Hotspot + transparent web-proxy ---
Replies: 7
Views: 2903

Hotspot + Web-Proxy

Try setting the dst-nat rule in the hotspot chain (above the jump chain rules) instead of the pre-hotspot chain. I did that and it solved the problem.[/quote]
by amity2kare
Tue Feb 13, 2007 4:48 pm
Forum: The User Manager
Topic: multiple ppoe servers (profiles) with usermanager
Replies: 1
Views: 1404

multiple ppoe servers (profiles) with usermanager

Hi, I have been using mikrotik for some years now and have done many installations in varied setups. I just started using usermanager and was really disappointed. For one, there is this 10 user limit. It would have more sense to charge for the usermanager license itself than to restrict on the no of...