I don't know if it is a good idea but in my opinion does exist more simplier method. My web is unfortunately in Czech language only but it should't be huge problem and you could leave your contact information here: https://www.securelink.cz/kontakt/ Allow me one note - if your email has some connect...

Dear sindy, thank you very much for your response and, because I feel you are so kind and would like to help me, allow me to inform you about the background of the mentioned latency problem. At present I am working together with Telit firmware developers on adaptation of the generic firmware of LM96...

Thank you for your answer sindy. I am thinking now if it could not be caused by bad MTU, MSS settings on some side of tunnel. Sindy, because you are experienced on the field of IKEv2/IPsec tunnels allow me to ask you the following question (I don't want to create new topics for it). I need to create...

To the first point: we can left the datagram size limitation out because its 1500 length is sufficient for purpose. To the second point: yes you are right. I did now the latency test in both directions with the same SIM card which has public IP, through the IKEv2/IPsec tunnel and directly between th...

Allow me to ask for help to solve me with the following problem with latency. I have the network in which is on one side the Strongswan server and on the opposite side are terminals connected through DSL, cable or wifi. When I am testing latency through the IKEv2/IPsec tunnels in the directions from...

Dear sindy, with your routes all is working like a charm and I can continue with my experiment with true bonding on four LTE channels :) Here is the short video of my experimental equipment :D 8) It consists of 4xRBM33g, 1xhEX ,1xRB260GS switch and is connected to Strongswan server via 4 EoIP tunnel...

Unfortunately till present I have obtained no reply. So allow me to ask you the following simple query: Is it possible to create two independent IPsec/IKEv2 tunnels with full bidirectional traffic between LAN1 <=> (WAN1 dynamic, natted IP) <==> (WAN10, public, static IP) <=> LAN10 LAN2 <=> (WAN2 dyn...

Allow me to ask you for help. I need to create two independent IPsec tunnels between RBM33g with two LTE modules with dynamic natted IPs and Strongswan server with two IPs: RBM33g + 2x LTE modules: lte1 - WAN20: dynamic natted IP, lte2 - WAN21: dynamic natted IP Strongswan server: WAN1, WAN2: static...