Thank you for your reply. It is Auto. Just in case, I have chosen IPv4, but it didn't help either.

Hello, We have a Mikrotik LTE Router Chateau LTE12 (RBD53G-5HacD2HnD-TC&EG12-EA). It works with a Sim Card from other operators in Germany, but not with T-Mobile (Telekom). I insert the Sim Card, it shows Telekom.de as an operator, it takes an ip address, shows the signal but there is no interne...

Thank you for your reply. The remote doesn't want to create a Virtual Network. Is it okay to do it only on our side? add chain=srcnat src-address=192.168.0.0/24 dst-address=10.200.120.0/24 action=netmap to-addresses=192.168.11.0/24 The map is as following: Our Company Local Network: 192.168.0.0/24 R...

Thank you for your reply. I have added it. I have seen also there is a field called "My Identifier" under IPsec \ Identities \ My ID Type \ Address. Do I need to add the second WAN IP address into that?

Hello,

We have WAN PPOE internet connection. The ISP gives us 2 WAN IP addresses. We want to use the second IP address in our IPsec VPNs. Where can I specify the second IP in IPsec connection? Thanks.

Hello, We have this scenario, that we want to establish an IPsec connection, but our internet subnet is also same on the opposite site (e.g 192.168.0.0/24). Unfortunately we can't change our subnet. I have seen in other routers that you create a virtual subnet, and the incoming traffic is forwarded ...

We have Mikrotik RB2011UIAS. We are using PPTP Vpn. It is working okay, but we have 1 problem that, it allows only 1 vpn access from 1 public ip address. I mean, if user A connected from the ip address for example 5.132.12.11, then user B cannot connect from that ip address. But user B can connect f...

Then it means the problem is not related to our Mikrotik at our head office. Something happens between office and home, right?

Thanks for your reply. We use fiber optic internet at our homes. But when we connect via vpn to our head office, sometimes vpn connection terminates and it becomes annoying.

Hello,

We have Mikrotik CCR1009-8G-1S-1S+. Sometimes vpn connections drop and here is log:

user logged in from xxx.xxx.x.xxx via winbox
<pptp-user> terminating...-peer is not responding.
user logged out.

What can cause this happen? Thank you in advance.