Thanks for your feedback Dennis! It seems the performance of ROS7 with full-tables is pretty poor on Tile.. we're using CCR1072 here with multiple full tables and it's really no fun. :( I started a thread on reddit about the various problems we're experiencing with full-tables on ROS7/CCR1072 - peop...

On ROS7.11.2 I have a routing filter on ingress that should append bgp-communties and bgp-large-communities to all routes learned from peer. However, just bgp-community is appended - bgp-large-community does not get appended. Here's the filter chain (32bit-ASN 666666 just for demonstration): append ...

You (don't) mean the /routing/bgp tab? No; I mean the window that pops up when double-clicking a single route. For IPv4 routes, this window has a tab "BGP" where I can see BGP-related details (peer, AS path etc. pp.) for a route. The window for single IPv6 routes has a RIP-, OSPF and MPLS...

Hi MikroTik, I just realised that there is no BGP-Tab in the IPv6 Route window to view BGP-route-details.

Are you planning to fix that?

Winbox 3.39
ROS 7.11.2

Thanks mkx!

Is it possible to use mANT LTE 5o with LtAP? I can't see any SMA connectors on the LtAP (https://mikrotik.com/product/ltap#fndtn-gallery) - yet the description page of the mANT LTE 5o says "It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series." Am I overseei...

Hello Elans,

thanks for your feedback. I already knew that wiki article and have read it - but I don't see where it explains how to enable/ disable only certain versions of SNMP.

SNMP is either ...

Am I missing something?

Hello folks, i'd like to monitor a MikroTik device via SNMP over the public internet. I therefore would like to allow monitoring via SNMPv3 (with authentication and encryption) only. As soon as I enable SNMP, I can query the device using all SNMP versions. Is it possible to restrict querying to SNMP...

Hello folks,

is it possible to provide Cisco phones (79xx) power over ethernet using a CRS328-24P-4S+RM ?

Hi folks,

is it somehow possible to load a custom default config when the reset button on a RouterBoard is pressed?

Thanks in advance for your feedback!

Normally, each user you use with various ppp interfaces is locally represented by a /ppp secret item and that item refers to a /ppp profile too, plus it also has local-address and remote-address parameter directly in itself. So the default-profile configured for the /interface ovpn-server server is...

You can put action=accept rules with the destination subnets you don't want to masquerade before the action=masquerade rule in the srcnat chain, or you can create an /ip firewall address-list containing all the destination subnets you want to exclude from masquerade handling and refer to it in the ...

Hello folks, I'm trying to achive the following setup with OVPN on Mikrotik RouterOS, but I don't get how to define multiple "tunnel networks" (local- and remote tunnel addresses). I have found this thread in the MikroTik forum, which suggests working with "users" and binding pro...

Hello folks, I have a split-tunnel setup with OpenVPN that works just fine. Everything gets routed & NATed to public internet, except for traffic with destination in 10.0.0./8 - which gets routed inside the OpenVPN tunnel and is not NATed. The rule that excludes traffic destined from 10.0.0.0/8 ...