MikroTik

Kazek

Well it does not work. If I turn on local forwarding with vlan tag I do not get IP from Ubiquiti. If I do local forwarding + no tag I get IP from cap router (as expected). Might be because the caps are routers with NATting, not a APs? ADDED LATER: Yup, tested with cap in bridge mode it works. So now...

Kazek

Yes but then it will be getting IP from cAP, not from the Unifi, right?

Kazek

Hi, Small problem that I'm trying to overcome. I usually use Mikrotik that acts as a router (NATting, DHCP etc) as well as CapsMan manager and with this scenario my setups always work. Right now I have a scenario were unifi gateway is the main device and a mikrotik router connected on LAN side acts ...

Kazek

Not sure if this will somehow help but I have the same issues at CCR1009 all the CAPs are disconnecting when the load is too big. That only happens on big installations with a few hundreds of CAPs. The only solution from Mikrotik support was to get a separate ARM machine (4011 was suggested) to run ...

Kazek

Is there any way to perform a factory reset of a Mikrotik via UI and not lose the ability to access it remotely?
I mean a way for MK to add automatically after resetting a firewall rule

Kazek

Hello, This looks easy on paper but it gives me a headache. An ISP gives a /29 subnet. Let's say 1.1.1.1/29 is a GW and port eth1 in my Mikrotik has an IP 1.1.1.2/29. Ports eth2,3,4,5 are LAN network with multiple devices connected. I would like two of them (10.0.0.7,10.0.0.8 ) to use other IPs from...

Kazek

Has anything changed in this release with handling of CapsMan?
I have a rule

add action=accept chain=input dst-port=5246,5247 protocol=udp

which since 6.48.2 has zero packets processed.
On 6.48.1 it was still working.

CapsMan still works BTW

Kazek

After upgrading to 6.48 I have two RB3011 with flapping ethernet ports. After downgrade to 6.47.8 the issue does not happen.

Kazek

Hi,

I'm on 6.47.3 and since upgrade all of the CAPs are getting randomly disconnected (all of them at once). It's around 400 units.
I get no errors in log. What might be the reason of all the CAPs getting disconnected (there are not disconnected in the network - the test m

Kazek

Yes it was. Without any proper solution as far as I'm aware (wiping the whole system or doing netinstall is not a real solution that could be implemented with hundreds/thousands of units)

Kazek

Hi, I'm managing thousands of hAP Lites which we all know have limited space. Before 6.47 the problems with upgrading were sporadically happening. These days with 6.47 I have locations where only a few % of routers will upgrade (via capsman). Most of them will just pop up an error and the only way t...

Kazek

Hi there, I'm having small (I hope) issue. The situation: Mikrotik router 1 (office) - l2tp server Mikrotik router 2 (remote location behind NAT) - l2tp client The VPN gets connected, both devices getting IP from LAN DHCP pool of MK1. I can ping MK2 from MK1, can SSH from MK1 to MK2 but whatever I d...

Kazek

OK maybe it's not correct what I'm saying. They are provisioned but it takes 5s per CAP to have active WiFi.
Not sure what's going on during this time, checking best WiFi channel?

One way or another it's done one by one - that's why it takes so much time.

Kazek

No certificates, Layer2

Kazek

No, no errors. And it's not only one location.

Provisioning of one Cap takes ~5s. That gives us 12 per minute and 720 per hour. So with my locations having around 500 of them it's 40min to provision all of them.
That's A LOT of down time...

Kazek

Hi, Is there a way to make provisioning of Caps faster? I'm using CCR1009 and if I make any change in location with ~ 400-500 Caps it takes 30-45min to re-provision all of them. During that time they are idle. Why does it take so long? It's not the CCR1009 CPU, it's always on few % tops. Looking for...

Kazek

To be honest, I was just saying that if you find some nice dual-WAN config you like, and it's made with static addresses, it's not a deal breaker, because you can use lease scripts to change config dynamically. Otherwise I don't enjoy multi-WAN configs very much and I tend to stay away. I also don'...

Kazek

Hi, Sorry for digging out such an old topic but I'm trying to implement a script to update the routes and address-list from top post here and can't make it work. Can you please suggest where the problem lies (v6.46.1)? MK config: /interface ethernet set [ find default-name=ether1 ] comment=ether1 se...

Kazek

I'm using CapsMan to upgrade all the nodes in the network. It's quite common that some of them fail to upgrade and the old firmware is left in its memory. If the memory is full this is not letting the nod to upgrade. The only workaround is to log in manually to it and remove the files. Maybe it's wo...

Kazek

I'm not sure if this problem was already mentioned at this forum but I had already few times a problem where after upgrading (ccr) to newest Os - bridges changed the mac address and they have exactly the same ones = conflict and the whole network goes bat crazy. I know using Admin MAC would avoid th...

Kazek

Qucik question. If I install 2x LTE miniPCI-e cards in LtAP can both simcards be active simultaneously and load balance the traffic?

Kazek

Would anyone with any piece of knowledge answer me, please?

Kazek

https://wiki.mikrotik.com/wiki/Manual:User_Manager

a Radius server

Kazek

Hi,

Maybe I'm missing some information but I can't find any info on how to assign wireless clients to VLANs with WPA2 enterprise + user manager running on Mikrotik.
Any help would be appreciated.

Kazek

Amazing! Works like a charm.
Thanks!

Kazek

Hi! I have a question about routing an extra /29 subnet I requested from my ISP. The Mikrotik has a PPPoE connection to ISP with /32 address. Now I requested an extra subnet and have some troubles setting it up. I know how to do that if I just want to set those 5 public IPs to devices connected to t...

Kazek

No one?
Anyone?
Any suggestions?

Kazek

Hi guys, I have a location (students dorm) with a CCR1009 as a core router and hAPs Lite in each unit. aLL ON 6.43.8. There were all set up manually the first time we did the installation and the whole system was working more or less ok (yea I know hAP Lites WiFi is not really great). A month ago I ...

Kazek

Hi guys! I'm setting up an IPTV app at location with core being Mikrotik CCR. The app by default pulls the channel playlist from address: http://iptv.local/playlist.m3u So to make it work I set up static DNS rule in CCR like this: /ip dns static add address=xxx.yyy.xx.qqq name=iptv.local and uploade...

Kazek

Someone can help? Or at least some info where can I learn the script code for mikrotik?

Kazek

Thanks! The little change with ^ seems to fix the issue! add action=create-dynamic-enabled identity-regexp=”^1” master-configuration=cfg1 slave-configurations=cfg2 name-format=identity add action=create-dynamic-enabled identity-regexp=”^2” master-configuration=cfg1 slave-configurations=cfg3 name-for...

Kazek

Hi, I have an issue with capsman. Version 6.43.4. I have around 180 CAPs with identities 1,2,3 etc. In capsman i have a provision rule like this: add action=create-dynamic-enabled identity-regexp=”1” master-configuration=cfg1 slave-configurations=cfg2 name-format=identity add action=create-dynamic-e...

Kazek

Hi. Did you manage to do it after all? Have similar issue.

Kazek

No. /interface vlan is a pipe whose one end is connected to the underlying interface and receives and sends tagged frames, and its other end is an interface itself which sends and receives tagless frames. The pipe just cares about tagging and untagging. So if you have, say, /interface vlan name=vla...

Kazek

Any and all of the IP configuration for each VLAN, including /ip dhcp-server, has to be attached to the tagless sides of the /interface vlan in this case.

Taggless meaning one of untagged ports, correct? If so that's not possible since they are a slave ports

Kazek

I imagine you're either running in the per-VLAN based mode or do not have STP correctly running. I haven't actually sniffed a link without an untagged VLAN defined to see if MikroTik hides this fault to keep networks working despite the best effort of their admins. [/quote Of course I know what Spa...

Kazek

With all due respect k6ccc could you please stop kidnaping my topic?

Kazek

Hi, I'm having an issue with VLANs. The setup: RB3011UiAS-RM + multiple CRS326-24G-2S+RM All machines were reseted to no default configuration and set up from the beginning. Router: eth0 - WAN eth1-5 - bridge1 (LAN1) eth6-10 - bridge_VLAN50 (LAN2) sfp1 - LAN1 + tagged LAN2 (VLAN50) DHCP server for V...

Kazek

sindy the internet part works - but when plugged to port 4 still getting internet not into vlan 50

Is this really the way to configure it (with dummy vlan40?)

Kazek

Are you sure this is caused by the router? No, but I want to start with setting it up correctly, so the traffic is processed by switch not CPU. How is the VLAN50 to ISP connection? Is ether1 directly connected to the ISP? Is VLAN50 prioritized by the ISP? VLAN50 is connected to separate router and ...

Kazek

Sorry, totally forgot about that. # jan/02/1970 00:01:22 by RouterOS 6.41.2 # software id = Y6S2-KRBE # # model = RouterBOARD 941-2nD # serial number = 7DE308027A97 /interface bridge add admin-mac=CC:2D:E0:02:62:03 auto-mac=no comment=defconf name=bridge add name=bridge-vlan50 protocol-mode=none /in...

Kazek

Hi guys, Although I do understand the idea of your solution I'm not quite sure how to achieve it. To help I will show you my config I'm using but with this solution all the IPTV traffic goes through CPU instead of a switch, right? /interface vlan add interface=ether1 name=eth1-vlan50 vlan-id=50 /int...

Kazek

Hi all! I'm reading this forum for a long time but now is a time to make an account since I'm stuck with a problem and there is no solution (or at least I did not find it) I have a hAP Lite with newest RouterOS. The eth1 has a tagged VLAN50 and port 4 is untagged VLAN50. There is an extra bridge to ...

Search found 43 matches