Hi,
I'm configuring L2TP VPN Server on Mikrotik to allow client from different vendor( Mikrotik router, Linux based host) to connect to.
My question is it possible configure static route with L2TP for client to use?
Thank you
Hi,
I Configured hotspot in Mikrotik v6.47, and I noticed that the files are not like the old version, I can not change the logo.
How can I change the logo or background image in the new version ?
Thank you
Hi,
Is it possible to isolate communication on the same subnet in RouterOS?
I did try the rule bellow but it doesn't work .
chain=forward action=drop src-address=10.192.0.0/16
dst-address=10.192.0.0/16 dst-address-type="" in-interface=B-GUEST log=no
log-prefix=""
there in no firewall , the mikrotik is directly connected to the Switch, and was working fine, just this morning I did the Upgrade for Mikrotik after that I noticed that I'm no more able to connect to the Switch using telnet
Hi,
I'm no more able to connect to my switch using /system telnet 192.X.X.X after I did mikrotik upgrade to v6.46.2 (stable) . each time it's display user login failure even before typing password
any idea ?
Hi,
I have a question about user-manager, after a long time of the use , when I go to maintenance I see that the use is 100% , what does it means?
also I need to know if there is away to remove sessions that have been registered a long ago.I see a thousand of them ?
I tried different way, some no Ruckus devices taking and displaying their real MAC on the same Pool, and also few Ruckus WAP also displaying their MAC, but majority display zeros. So I think it's related to the device not the DHCP Server. I thought in the beginning that maybe it's something related ...
Thank you for your replay . For DHCP option I did this : /ip dhcp-server option add code=43 name=Ruckus value='192.168.11.253' , is that correct? for MAC with zeros , I'm not talking about one client, leases display all the client's MAC are with zeros ( for info the client are Ruckus WAP). please no...
Hi all, I configured DHCP server on Mikrotik for my Ruckus APs. I have two questions : First : When I display the distributed addresses I see no MAC address Only zeros, why? : Example : Address 192.168.11.130 MAC Address 00:00:00:00:00:00 Client ID Server dhcp2 Second: How can I configure Option 43 ...
As I mentioned on one of my post , the issue is when I enable vlan-filtering nothing work, at least now the WAP is broadcasting the SSID and clients can take IP from VLAN 10 range and reach the internet. For my management Interface don't bother yourself about it now, I use winbox and I'm connected o...
you need to re-read the confi nothing is missing for the section /interface bridge : there is only one bridge interface "bridge1" so the whole config will be : # serial number = 3B05024DCBAA /interface bridge add name=bridge1 /interface ethernet set [ find default-name=ether3 ] comment=Eth...
Hi , I did send you the complete configuration , I have just removed what it's not necessary , Hostspot config ( too much logins infos ..) Yes I have only one DHCP Server which on VLAN 10, VLAN 11 get their IP from CnMaestro host (ether3) not from Mikrotik that why you see just one DHCP pool. I have...
Thank you for your response ;
@mkx : It doesn't work when I enable vlan-filtering
also I tried to add ether4 as local laptop guest on vlan 10 by adding untagged=ether4 to the bridge vlan, when I plug the my laptop I get IP from vlan 11 range not vlan 10.
Thank you for your response ;
@mkx : It doesn't work when I enable vlan-filtering
also I tried to add ether4 as local laptop guest on vlan 10 by adding untagged=ether4 to the bridge vlan, when I plug the my laptop I get IP from vlan 11 range not vlan 10.
Using CCR (most likely) means no switch chip. So here's the config which should be working on both models you mentioned (I'll use generic interface names, you can change them to whatever you'll be using): /interface bridge add name=bridge vlan-filtering=yes /interface bridge port add bridge=bridge ...
Using CCR (most likely) means no switch chip. So here's the config which should be working on both models you mentioned (I'll use generic interface names, you can change them to whatever you'll be using): /interface bridge add name=bridge vlan-filtering=yes /interface bridge port add bridge=bridge ...
Using CCR (most likely) means no switch chip. So here's the config which should be working on both models you mentioned (I'll use generic interface names, you can change them to whatever you'll be using): /interface bridge add name=bridge vlan-filtering=yes /interface bridge port add bridge=bridge ...
Yes this is exactly my setup, -Internet through Ether2. - wireless controller (Cnmaestro combium) through Ether3 , (untagged member of VLAN 11 only) - WAP (cambium) through ether1 - needs 2 VLANs ( untagged on VLAN 11 to get to wireless controller , and tagged on VLAN 10). - wireless controller need...
I don't see clearly what you mean, there is no solution to untagg vlan 11 and tagged vlan 10 on the same port?
WAP is configured to broadcast SSID on vlan 10 that all , and it's managed on different vlan ( vlan10)
My need is to connect AP directly to Mikrotik routeur instead of switch which it's worked perfectly.The AP need to be connected to the controller on VLAN 11 as untagged to be take ip from DHCP server , take SSID (vlan 10) and to be managed. The WAP was able to contact the controller when I configure...
Hi,
I'm trying to configure a WAP to Mikrotik routeur using VLANs, the WAP is on VLAN 11 for management and SSID configured on VLAN 10.
how can i define the vlan 11 as native vlan so the WAP can connect to the controller and take the configuration?
Hi all, I have configured hotspot +user-manager, I created ONE account with unlimited shared users and unlimited uptime, the MAC-Cookies is enabled cookies expired after 3 days. as far as I know when the cookies are expired ,authentication page should be appear again.What I noticed is the client is ...
Thank you very much for your reply. for the bandwidth for the upload, do I need to set it with the Download bandwidth or the upload one ( My Intenet lines are 100d/20u)? for the download what do you mean by better configure it from other side.there is no other side,as you can see on the config my li...
@pe1chl : thank you for your reply . to be honest i didn't see how can I manually specify the bandwidth. below the configuration that I made for router Configured with Hotspot+Load-balancing(4Lines of 100Mo)+ PCQ # jan/02/1970 01:27:38 by RouterOS 6.43.8 /interface ethernet set [ find default-name=e...
Thank you for your reply , I don't have a config ready right now, my question was just to know first if it's possible to configure PCQ with load-balancing and if it work fine or not.because as far as I know Mikrotik does not support link aggregation. and I need to know how mikrotik will know the ava...
Hi, I need to configure Mikrotik to share equal bandwidth using PCQ , but my router is configured with load-balancing (4 WAN or more), as far as I know, Mikrotik is not able to do Link aggregation, so my question is : does the PCQ will work fine with Load-balancing ,how it will work in this case and...
Hi all, I need to configure a new profile named "Seminar" valid 3 days with unlimited users, for that I created a new limitation with uptime= 3d and then created a profile with validity=3d and shared users=Unlimited. the issue is that the client complain that the code is not valid after so...
Hi Rich , I'm using firfox on Linux desktop machine , I tried many sites on https like https://duckduckgo.com , https://www.wikipedia.org , ... I get another page open "Login to Network" so even I on https I get authentication page .but this is not working for all https sites for example h...
yes that right but during the test we find that sometimes device will not popup the page.and we need to try to navigate normally and then by trying to open any website(http) the hotspot page popup automatically , the issue is when the client chose to open for the first time an https website , he got...
Hi normis , Thank you for your replay . I have no strange DNS configured and no walled garden. and still don't get authentication page when I open https website and it's works fine when I use just http. I'm using open ssl certifcat (let's encrypt) , can it be the issue? do you have any idea if I buy...
Hi, Thank you all for your response. @R1CH : what do you mean by redirecting clients to the hostspot is not possible? . when I connect to the hotspot the browser automatically redirect me to the authentication page or I need to open an http website (example :www.msn.com) and then I automatically be ...
not yet , I need to know first if anyone has already did it ,if it is works and known buy all the browsers. I tried open ssl certificat "let's encrypt" , they give you 90 days then you need to regenerate a new one.but it's doesn't work as expected , still get the warning message " ssl...
Hi ,
I need to know if anybody has already bought an SSL Certificat for Mikrotik to work with hotspot and does it known for all browser and devices?
I tried let's encrypt but it's doesn't work as expected ,
Hi,
I noticed that when I create a user (2shared) I can use the same user in the third device if one of the device is logged off or the keepalive timeout is reached .
my question is how can I stop this ? I don't want the code to be used again .
regards
Hi,
I configured Mikrotik as hotspot with internal RADIUS Server , it's working fine but each time the client is disconnected/reconnected he is forced to authenticate again.
How can solve this issue ??
Thanks
Thank you for your reply , torrent is not my issue now , I have a ONE540 router before Mikrotik that block that. Yes I know that the best scenario is the clients should be connected to the LAN Miktrotik, But I have no choice in this case , this is the only solution and I need to know what is the bes...
Hi, I need to configure Mikrotik Router to loadbalance 4 WANs , the Clients will not be directly connected to the LAN interface , Only one IP address will given to the LAN interface (all the clients will be noted through this IP) , my question is : what is the best config to be chosen for "per-...
Hi I'm training to configure loadbalancing with failover on mikrotik routeur using Dual WAN , the config seems to be working fine, however I noticed something weird , when I shutdown the WAN1 for example to test the failover, the traffic goes throught WAN2 however in IP>Firewall> connexions I still...
Hi, I'm traying to configure a loadbalancing with failover on Mikrotik router using 2 WANs Interfaces (see attached picture to understand my topology) , the configuration is seems to be working fine, however when I stop WAN1 interface and I try ping it working , but in the IP>Firewall>connections it...