Community discussions

MikroTik App

Search found 19299 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 65
by anav
Thu Mar 28, 2024 2:14 am
Forum: General
Topic: 2 WAN Failover - Cloud DNS
Replies: 9
Views: 393

Re: 2 WAN Failover - Cloud DNS

Super well do you get a public IP or a private IP from the ADSL modem??
If you reboot the modem do you sometimes get a different WANIP etc....
by anav
Thu Mar 28, 2024 12:14 am
Forum: General
Topic: 2 WAN Failover - Cloud DNS
Replies: 9
Views: 393

Re: 2 WAN Failover - Cloud DNS

/ip firewall address
add address=cloud.mikrotik.com name=MyCloud
add address=cloud2.mikrotik.com name=MyCloud

/ip mangle
add chain=output protocol=udp dst-port=15252 dst-address-list=MyCloud action=mark-routing new-routing-mark=useWAN2
by anav
Thu Mar 28, 2024 12:04 am
Forum: General
Topic: 2 WAN Failover - Cloud DNS
Replies: 9
Views: 393

Re: 2 WAN Failover - Cloud DNS

To ensure the wireguard handshake coming in on WAN2 gets answered by WAN2 ( the slower ADSL connection with public IP ) /routing table add fib name=useWAN2 /ip mangle add chain=input action=mark-connections connection-mark=no-mark in-interface=ether2 \ new-connection-mark=incomingWAN2 passthough=ye...
by anav
Wed Mar 27, 2024 11:52 pm
Forum: Beginner Basics
Topic: hAP ax3 behind Internet Router with DHCP, not working as desired
Replies: 3
Views: 156

Re: hAP ax3 behind Internet Router with DHCP, not working as desired

For a network without vlans......... /interface bridge add ingress-filtering=no name=bridge /interface list add name=management /interface wireless set [ find default-name=wlan2 ] band=5ghz-onlyac channel-width=20/40mhz-Ce country=canada disabled=no frequency=5500 \ mode=ap-bridge name=home5GIG secu...
by anav
Wed Mar 27, 2024 11:43 pm
Forum: Beginner Basics
Topic: hAP ax3 behind Internet Router with DHCP, not working as desired
Replies: 3
Views: 156

Re: hAP ax3 behind Internet Router with DHCP, not working as desired

Flat network or do you have vlans for different SSIDS, ( home, guest, iot, media, etc....)
by anav
Wed Mar 27, 2024 7:13 pm
Forum: Announcements
Topic: v7.14.2 [stable] is released!
Replies: 452
Views: 90944

Re: v7.14.2 [stable] is released!

Thats 6.2 miles for you DN, and for me..... 5.4 nm. :-)
by anav
Wed Mar 27, 2024 5:20 pm
Forum: General
Topic: 2 WAN Failover - Cloud DNS
Replies: 9
Views: 393

Re: 2 WAN Failover - Cloud DNS

To be clear, you want WAN1 to be primary as it has higher bandwidth. In addition you also want WAN2 to be available all the time as wireguard goes through here. If WAN1 goes down traffic should go to WAN2 as backup. If WAN2 goes down, you will lose your ability to keep wireguard going.......... (1) ...
by anav
Wed Mar 27, 2024 2:35 pm
Forum: Beginner Basics
Topic: Vlan Client, MGMT - main router, transmitter, receiver with internet connection
Replies: 2
Views: 245

Re: Vlan Client, MGMT - main router, transmitter, receiver with internet connection

Post the three MT configs
/export file=anynameyouwish ( minus router serial number and any public WANIP info )
by anav
Wed Mar 27, 2024 2:02 pm
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

Well its hard to say since the draytek is not an MT device.
I am also not aware of the firewall rules on the draytek etc..
So winbox doesnt see the capac at all?

Did you try it by IP address in Winbox?
192.168.0.200:winboxPort#
by anav
Wed Mar 27, 2024 1:57 pm
Forum: General
Topic: Connect two Mikrotik with gray IP using WireGuard
Replies: 9
Views: 535

Re: Connect two Mikrotik with gray IP using WireGuard

I was of the understanding that BTH can very much handle two non-publicly accessible ISPs and upstream routers are not accessible to port forward to the MT device. ( static or dynamic is a bogus concern ). Zerotier is also a viable solution but one is going through a third party provider, whereas BT...
by anav
Wed Mar 27, 2024 1:02 pm
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

Latest config of both router and capac.
by anav
Wed Mar 27, 2024 1:01 pm
Forum: General
Topic: 2 WAN Failover - Cloud DNS
Replies: 9
Views: 393

Re: 2 WAN Failover - Cloud DNS

/export file=anynameyouwish ( minus router serial number and any public WANIP information )
by anav
Wed Mar 27, 2024 12:59 pm
Forum: General
Topic: Connect two Mikrotik with gray IP using WireGuard
Replies: 9
Views: 535

Re: Connect two Mikrotik with gray IP using WireGuard

Gray=Dynamic?

In that case do either of the two connections provide a PUBLIC IP, to your MT router, OR to an upstream IP router, that you can forward a port on??
Question asked and not answered ????
by anav
Wed Mar 27, 2024 12:58 pm
Forum: General
Topic: AX3 Wifi confusion
Replies: 9
Views: 568

Re: AX3 Wifi confusion

Illegally setting up WIFI in your country is probably not the best solution.
by anav
Wed Mar 27, 2024 4:43 am
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

Ahhh I see the issue.......... one of the config lines on /interface bridge ports is incorrect. From: /interface bridge port add bridge=bridge1 ingress-filtering=yes frame-types=admit-only-untagged-and-priority-tagged interface=wifi1 pvid=17 add bridge=bridge1 ingress-filtering=yes frame-types=admit...
by anav
Wed Mar 27, 2024 4:39 am
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

(1) Since you changed emergaccess to 192.168.88.1 ,, you can get rid of this entry at the bottom. /ip address add address=192.168.55.1/24 interface=emergaccess network=192.168.55.0 (2) Everything else looks fine and thus I suspect we will have to see what is on the other side of ether1 ( where the p...
by anav
Wed Mar 27, 2024 4:32 am
Forum: General
Topic: Connect two Mikrotik with gray IP using WireGuard
Replies: 9
Views: 535

Re: Connect two Mikrotik with gray IP using WireGuard

Gray=Dynamic?

In that case do either of the two connections provide a PUBLIC IP, to your MT router, OR to an upstream IP router, that you can forward a port on??
by anav
Wed Mar 27, 2024 4:30 am
Forum: General
Topic: AX3 Wifi confusion
Replies: 9
Views: 568

Re: AX3 Wifi confusion

Normal MT wifi experience.........Why I use another vendors product for wifi. I mean it will work well once you figure it out, but for me personally not worth the stress to get there.
I am also lazy and dont like dealing with capsman.
by anav
Wed Mar 27, 2024 12:14 am
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

So the device at the data center is mikrotik CHR or something else. The local MT router config should be as a client for handshake then. Which local users or subnets are to use this wireguard connection for internet? What happens if the wireugard tunnel goes down for these users? I gather you have n...
by anav
Wed Mar 27, 2024 12:12 am
Forum: Beginner Basics
Topic: Basic Wireguard Setup
Replies: 11
Views: 9049

Re: Basic Wireguard Setup

What is your point? Your post has no context as you were not in the prior discussion, if you have issues please start a new thread.
by anav
Wed Mar 27, 2024 12:05 am
Forum: Beginner Basics
Topic: Unable to find new replacement for existing router...
Replies: 7
Views: 519

Re: Unable to find new replacement for existing router...

I started with CAPACs, and then I migrated, to tplink business access points but kept MT for excellent routers.. AX3 is an excellent router ( and you should get decent local wifi near the unit ) and an even better router is the RB5009
by anav
Wed Mar 27, 2024 12:00 am
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

There are two things Each end should have the same MTU setting, start with 1420 Only the client for handshake should use the clamping rule aka the mikrotk. Also starting to get confused as to what you are doing. A. sending wireguard through a third party provider from MT to . proton, or windscribe e...
by anav
Tue Mar 26, 2024 11:57 pm
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

Not bad!! Good work. (1) Correct only thing to change on the bridge is the name if you dont like bridge and turning on vlan-filtering=yes As I stated I always assign ETHER2 an off bridge address to actually do the initial config and emergency access to the CAP, in case the bridge blows up. (2) Yes, ...
by anav
Tue Mar 26, 2024 11:41 pm
Forum: General
Topic: Connect two Mikrotik with gray IP using WireGuard
Replies: 9
Views: 535

Re: Connect two Mikrotik with gray IP using WireGuard

What do you mean by gray addresses? I am only familiar with mauve addresses.

https://help.mikrotik.com/docs/display/ROS/Back+To+Home
by anav
Tue Mar 26, 2024 9:01 pm
Forum: Beginner Basics
Topic: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]
Replies: 32
Views: 1598

Re: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]

Problem is I stopped looking at this thread awhile ago doing to the moving datum.
Once you get all the final equipment in place, then will be able to devote time and energy to a static target.
by anav
Tue Mar 26, 2024 8:57 pm
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

Comparing my config to your config I can see two errors right away. Hovle, should I report you to the UN for attempting to exterminate the newbie race by piling on crap when the solid foundation does not yet exist and furthermore a config that has errors which should be addressed first. If I was in ...
by anav
Tue Mar 26, 2024 2:02 pm
Forum: General
Topic: l009uigs-2haxd-in Wireguard speed only 70 mbps
Replies: 7
Views: 450

Re: l009uigs-2haxd-in Wireguard speed only 70 mbps

Was not aware you have two wireguard tunnels on the go.
What are the four endpoints???
Which end is the server (for the handshake) on each network.
by anav
Tue Mar 26, 2024 1:56 pm
Forum: General
Topic: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)
Replies: 10
Views: 526

Re: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)

I wont work on a config that is in my opinion hosed, but many others should help when you have specific questions.
by anav
Tue Mar 26, 2024 1:54 pm
Forum: General
Topic: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)
Replies: 10
Views: 526

Re: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)

Lots of threads contain the information you are looking for. Suggest search.
The links you already have seem germane.
by anav
Tue Mar 26, 2024 12:57 pm
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

The problem is using vlan1. Your management vlan is the subnet BASE. All your smart devices should get their IP address from the BASE subnet. No one wants to look at a article format, next time post your config as it appears for real /export file=anynameyouwish ( minus router serial number and any p...
by anav
Tue Mar 26, 2024 12:51 pm
Forum: General
Topic: multi WAN & Vlan internet setup
Replies: 2
Views: 288

Re: multi WAN & Vlan internet setup

No need to use vlans for WAN in a straight up scenario.
by anav
Tue Mar 26, 2024 12:45 pm
Forum: General
Topic: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)
Replies: 10
Views: 526

Re: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)

If you have a home subnet .88, then call it vlan88 and make it a vlan and then the config will make sense. and where is VLAN50 ???? /ip address add address=192.168.88.1/24 interface= bridge network=192.168.88.0 { wrong } add address=192.168.99.1/24 interface=vlan99 network=192.168.99.0 add address=1...
by anav
Tue Mar 26, 2024 12:41 pm
Forum: General
Topic: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)
Replies: 10
Views: 526

Re: Dual-WAN PPPoE +DHCP (LAN clients on same VLAN split routing, no load balance)

Can you provide a diagram, so far it looks like most of your bridge ports are connected to smart devices (like smart APs and switches) as they are mostly trunk ports...... You can remove this completely useless line.......... bridge ports/vlans deals with data traffic or management vlan. add bridge=...
by anav
Tue Mar 26, 2024 12:37 pm
Forum: General
Topic: l009uigs-2haxd-in Wireguard speed only 70 mbps
Replies: 7
Views: 450

Re: l009uigs-2haxd-in Wireguard speed only 70 mbps

Post both configs........ ( minus public WANIP info, keys etc. )
The default mtu setting is 1420 so dont understand why you lowered to the default??
Important is that both sides of the connection have the same mtu setting
by anav
Tue Mar 26, 2024 3:38 am
Forum: General
Topic: VLAN headache
Replies: 12
Views: 722

Re: VLAN headache

Post both configs again with latest settings
by anav
Mon Mar 25, 2024 11:00 pm
Forum: General
Topic: hAP ax3 wired mesh [SOLVED]
Replies: 4
Views: 846

Re: hAP ax3 wired mesh [SOLVED]

The only reason to use the hex is if your ISP throughput ( assuming single ISP ) is less than 600Mpbs.
by anav
Mon Mar 25, 2024 5:14 pm
Forum: General
Topic: VLAN headache
Replies: 12
Views: 722

Re: VLAN headache

Ensure the subnet being used for the cameras fits what they are hardcoded too.
Then via the mac addresses of each camera fix the IP static to the mac address in DHCP leases for that subnet
by anav
Mon Mar 25, 2024 3:30 pm
Forum: General
Topic: CRS317 + CRS328 - InterVLAN routing with L3HW
Replies: 15
Views: 839

Re: CRS317 + CRS328 - InterVLAN routing with L3HW

You have bad info and are not completing the config as provided on the second bridge device. neighbours discovery, bridge itself still has frame types, IP DNS server wrong etc etc. The first one acting as a router is a complete abomination mixing non CRS3 and CRS3 switch setup types and MKX politely...
by anav
Mon Mar 25, 2024 3:22 pm
Forum: Beginner Basics
Topic: Hairpin NAT noob question
Replies: 3
Views: 299

Re: Hairpin NAT noob question

1. This indicates an issue add interface= *24 list=LAN 2. Input chain rules are a bit funny. add action=accept chain=input comment="Allow established,related,untracked" connection-state=established,related,untracked add action=drop chain=input comment="Drop invalid" connection-st...
by anav
Mon Mar 25, 2024 2:55 pm
Forum: Beginner Basics
Topic: Hairpin NAT noob question
Replies: 3
Views: 299

Re: Hairpin NAT noob question

Sorry your missing the complete config so unable to comment with certainty/
/export file=anynameyouwish ( minus router serial number, any public WANIP info, )
by anav
Mon Mar 25, 2024 2:28 pm
Forum: General
Topic: Only 100M internet connection on RB750Gr3
Replies: 9
Views: 3159

Re: Only 100M internet connection on RB750Gr3

THe 750 was the wrong purchase if looking to maximize 1gig connection. The hapax3 was the device you should have picked up. I dont expect you will see much above 600 on the hex, if that.
by anav
Mon Mar 25, 2024 12:40 pm
Forum: Beginner Basics
Topic: Setting up VLANs on RB5009 with an ASUS RT-AX88U Pro as access point
Replies: 9
Views: 595

Re: Setting up VLANs on RB5009 with an ASUS RT-AX88U Pro as access point

The ASUS is a wifi router not an access point and its not a business model its a consumer pro model. 1. No where in the specs does it mention vlans or vlan tagging 2. no where in the manual does it detail assigning vlans and firewalling between vlans. You have a hunk of junk. suggest look at alterna...
by anav
Mon Mar 25, 2024 12:28 pm
Forum: Beginner Basics
Topic: Re: VLAN On Main Router + 2 HAP
Replies: 11
Views: 877

Re: VLAN On Main Router + 2 HAP

I would look but I dont do capsman sorry.
by anav
Mon Mar 25, 2024 12:24 pm
Forum: General
Topic: VLAN headache
Replies: 12
Views: 722

Re: VLAN headache

Yup, I saw unsafe pptp and then winbox open on the internet............. The right way to handle that is for you to at least be able to wireguard into the First Router. From there you can reach the 305 switch and the second hex through the neighbours discovery etc.
by anav
Mon Mar 25, 2024 3:13 am
Forum: General
Topic: VLAN headache
Replies: 12
Views: 722

Re: VLAN headache

ONE BRIDGE - ROUTER # 2024-03-24 17:59:16 by RouterOS 7.14.1 # model = RB760iGS /interface bridge add name=bridge ingress-filtering=yes /interface vlan add interface=bridge name=vlan10-client vlan-id=10 add interface=bridge name=vlan2-homeoffice vlan-id=2 add interface=bridge name=vlan99-mngmt vlan-...
by anav
Mon Mar 25, 2024 2:14 am
Forum: Beginner Basics
Topic: Dual WAN Setup - how to get both public IPs reachable
Replies: 6
Views: 1729

Re: Dual WAN Setup - how to get both public IPs reachable

By fixing your config.
by anav
Sun Mar 24, 2024 10:51 pm
Forum: Beginner Basics
Topic: Limit clients by signal range.
Replies: 22
Views: 3814

Re: Limit clients by signal range.

Since the business is closed at Night, capture all the mac addresses, being used over a couple of nights and weekend, then block them all starting monday. Then do the same thing the following weekend and probably one more weekend. Use access lists in wifi settings I think. Thinking three weekends to...
by anav
Sun Mar 24, 2024 10:48 pm
Forum: General
Topic: VLAN headache
Replies: 12
Views: 722

Re: VLAN headache

Config of hex, config of second hex please, the 305 I will assume has trunk port from HEX with internet and a trunk port going to hex switch. Assuming there is management vlans where the 305 and hex switch get their IP address from. /export file=anynameyouwish ( minus router serial number, public W...
by anav
Sun Mar 24, 2024 9:44 pm
Forum: General
Topic: CRS317 + CRS328 - InterVLAN routing with L3HW
Replies: 15
Views: 839

Re: CRS317 + CRS328 - InterVLAN routing with L3HW

I have no idea what you are trying to do................... but the setup I gave you should enable HW offloading on the bridge, its done. Intervlan routing is something that is foreign to me. Either the unit is a switch or a router in terms of setup............. it can or cannot have hw offloading. ...
by anav
Sun Mar 24, 2024 9:16 pm
Forum: General
Topic: CRS317 + CRS328 - InterVLAN routing with L3HW
Replies: 15
Views: 839

Re: CRS317 + CRS328 - InterVLAN routing with L3HW

As for your setups. If 317 is a router, where are the router settings? Make up your mind! If the RB5009 is just for internet then you need to have double nat and make up all the subnets on the switch. The switch will get a private IP as its WAN ( private IP from 5009 default subnet I guess ) If the ...
by anav
Sun Mar 24, 2024 7:21 pm
Forum: General
Topic: CRS317 + CRS328 - InterVLAN routing with L3HW
Replies: 15
Views: 839

Re: CRS317 + CRS328 - InterVLAN routing with L3HW

I disagree with MKX, cannot recommend, in general, a switch for routing.
The CRS317, can route up to about 400Mbps but thats it, so depending upon your internet connectivity????????
The RB50009 is designed to router and would be my first choice and then feed one of the switches with the SFP+ port.
by anav
Sun Mar 24, 2024 7:13 pm
Forum: General
Topic: TIP: Do not use rp-filter=Strict with Dual WAN policy-based routing [SOLVED]
Replies: 6
Views: 1174

Re: TIP: Do not use rp-filter=Strict with Dual WAN policy-based routing [SOLVED]

Actually the learning point is dont change anything from defaults if you dont understand all possible ramifications.
So glad the MT documentation makes it crystal clear NOT, with gobblity gook speak...........
by anav
Sun Mar 24, 2024 4:00 pm
Forum: Beginner Basics
Topic: What happens to an interface that is not part of any bridge?
Replies: 7
Views: 583

Re: What happens to an interface that is not part of any bridge?

YOu have to have clear requirements and an understanding of the role of the device you are using. For example it would appear the hex is to be used as a switch and is not connected to an ISP? Identify all users/devices Identify all traffic flows they need (external/internal) Then a config can be des...
by anav
Sat Mar 23, 2024 9:22 pm
Forum: Beginner Basics
Topic: cAP ac Multiple SSID
Replies: 20
Views: 988

Re: cAP ac Multiple SSID

Its an excellent link if NOT using capsman controller concept. Setting up the Capacs for the link above is easy and fast. Setting up the off bridge access and doing the configuring from there is recommended. just put something like 192.168.36.3 into the ipv4 settings of your laptop and you are in......
by anav
Sat Mar 23, 2024 9:21 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

Okay, no worries. Unfortunately that makes no sense to me as it shouldnt happen. As you can see by firewall rules, they are blocked at layer 3 by firewall rules
and the vlan structure blocks any level 2 traffic. so there is no logic
by anav
Sat Mar 23, 2024 9:16 pm
Forum: General
Topic: Configure mulitple DHCP Server on each ethernet port
Replies: 5
Views: 641

Re: Configure mulitple DHCP Server on each ethernet port

Before doing any configuring lets make sense of what you are doing. A. All connections to the smart devices ( capac, and assuming smart switches ), means that you should have a managment subnet where all smart devices get their IP address from and are connected and accessible only by admin. One can ...
by anav
Sat Mar 23, 2024 9:10 pm
Forum: General
Topic: Dual-WAN failover using recursive route not working
Replies: 2
Views: 298

Re: Dual-WAN failover using recursive route not working

Complete config required for analysis ( minus router serial number, public WANIP information, keys etc.. )
From the displayed information separate the two dns by distance, so the cloudflar ones should both be disttance=2
What is vrf-doing on wan interfaces ???
by anav
Sat Mar 23, 2024 8:03 pm
Forum: Beginner Basics
Topic: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]
Replies: 32
Views: 1598

Re: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]

Why the RB1100, its old news. The RB5009 is cheaper and very capable. However the real question is what are the Throughputs of your Three ISP connections? ISP1 up/down ISP2 up/down ISP3 up/down NOW and planned. If all three are 1gig, then even the 5009 is getting pushed. If you plan on any 2.5 gig c...
by anav
Sat Mar 23, 2024 6:00 pm
Forum: General
Topic: Where's my bottleneck?
Replies: 29
Views: 1453

Re: Where's my bottleneck?

Well my test was mostly aimed at the laptops LOL........... I suspect they max out around 700
by anav
Sat Mar 23, 2024 5:54 pm
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

Thats what I thought, as the go to rule, that I provided earlier at post #3, does that, but the OP reported issues with it ???? / ip firewall mangle add action=change-mss chain=forward comment="Clamp MSS to PMTU for Outgoing packets" new-mss=clamp-to-pmtu out-interface=wireguard1 passthrou...
by anav
Sat Mar 23, 2024 5:51 pm
Forum: Beginner Basics
Topic: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]
Replies: 32
Views: 1598

Re: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]

Okay to recap before I look at the monster and by the way, how one would expect to grasp that in bits and pieces of posts etc is amusing.......... You have three WANS and two ROUTERs in the mix. - The Stormshield router gets WAN2 and provides DHCP for the following vlans: 102,106,108,109,111 - The R...
by anav
Sat Mar 23, 2024 5:22 pm
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

Not a sweet Fing clue. I just saw it writtng somewhere but my guess is this allows the router to match what its detecting on a given connection ( very flexible) for optimal results.
by anav
Sat Mar 23, 2024 5:21 pm
Forum: General
Topic: Where's my bottleneck?
Replies: 29
Views: 1453

Re: Where's my bottleneck?

try laptops on both sides of RB5009 and both sides of HAPAX3.... just give both routers a fixed private WANIP address of 192.168.55.5 ( gateway 192.168.55.1) and the laptop on the router side 192.168.55.2 and run IPERF, then you will get a good sense of the throughput on each router wan to lan and l...
by anav
Sat Mar 23, 2024 3:32 pm
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

I have seen this rule also tried. Starting with putting wireguard mtu setting back to 1420 with

/ip mangle
add action=change-mss chain=forward new-mss=1380 out-interface=wireguard1 protocol=tcp tcp-flags=syn tcp-mss=1381-65535[/color]
[/i]
by anav
Sat Mar 23, 2024 3:27 pm
Forum: General
Topic: Where's my bottleneck?
Replies: 29
Views: 1453

Re: Where's my bottleneck?

Have you thought of using IPERF for your testing??
by anav
Sat Mar 23, 2024 2:14 pm
Forum: Beginner Basics
Topic: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]
Replies: 32
Views: 1598

Re: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]

I would caveat that with enough detail that shows where all the WANs are comming from and which vlans are going to which device over which ports!! ( to which devices )
by anav
Sat Mar 23, 2024 1:17 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

According to the current rule setup. This is the only traffic we are allowing. a. anyone on the source address list Authorized should be able to ping and access any vlan user/device. b. wg user1 has access to vlan300 c. wg user2 has access to vlan 600 d. wg user3 has access to vlan 700 From my under...
by anav
Sat Mar 23, 2024 3:51 am
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

Please verify that a user from one vlan can access a device on another vlan ( OTHER THAN those allowed ) in other words if a user can ping a user, do the next step access the user device. One should normally be able to ping the gateway of any vlan but I dont think you should be able to ping from use...
by anav
Sat Mar 23, 2024 3:47 am
Forum: General
Topic: How to exchange internet connection between 2 oficces.
Replies: 3
Views: 571

Re: How to exchange internet connection between 2 oficces.

Correct on the typo, should be 22 not 12, fixed up top!! Thanks.
by anav
Fri Mar 22, 2024 10:23 pm
Forum: Beginner Basics
Topic: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]
Replies: 32
Views: 1598

Re: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]

None of your vlans are identified, so how can 354 be the router ??? etc.....
So my request for network diagram, but ignored, does not let me progress any further.
you have wan and lan list but dont see any IP DHCP client or route etc................
by anav
Fri Mar 22, 2024 4:54 pm
Forum: Beginner Basics
Topic: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]
Replies: 32
Views: 1598

Re: CRS3xx and vlans: access port doesn't see traffic unless it is removed from bridge [SOLVED]

Detailed network diagram and current config, and i will have it fixed in a jiffy pop.
What always puts the icing on the cake, if you understand your own planning is also.
a. identifying all the users/devices
b. identifying all the traffic they need to accomplish.
by anav
Fri Mar 22, 2024 4:52 pm
Forum: General
Topic: Fibre ISP - VLAN PPPoe configuration
Replies: 3
Views: 519

Re: Fibre ISP - VLAN PPPoe configuration

No thats fine but you should probably post your config here to ensure its setup properly

/export file=anynameyouwish ( remove router serial number, any public WANIP information ( so public IP, public IP gateway, username and password )
by anav
Fri Mar 22, 2024 4:50 pm
Forum: General
Topic: access to winbox by wireguard
Replies: 3
Views: 284

Re: access to winbox by wireguard

Now to answer your question directly
Do this
/interface list member
add comment=defconf interface=bridge list=LAN
add interface=wireguardInterfaceX list=LAN
add interface=wireguardInterfaceY list=LAN
etc...

add comment=defconf interface=ether1 list=WAN
by anav
Fri Mar 22, 2024 4:44 pm
Forum: General
Topic: access to winbox by wireguard
Replies: 3
Views: 284

Re: access to winbox by wireguard

If anyone complains about your long list of code, they should look inwards for not supporting my recommendation for a first post process !!! Now for the OP...... (1) WIREGUARD is not a local SUBNET, so you only assign an IP address, nothing else!! (2) Get rid of this default setting, its on the stat...
by anav
Fri Mar 22, 2024 4:27 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

CRS326 1. Same thing, get rid of pvid 999 on bridge itself. 2. Still cannot add :-), you show 4 APs 6-8. Well not quite, you show two AP6s LOL so should be 6-9. How many ports do you use/state for this answer=ports 8-12 ( which is 8,9,10,11,12) 5 ports ???? ( will assume you have five APs for config...
by anav
Fri Mar 22, 2024 3:41 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

1. No need to set pvid on bridge, its not the usual way. 2. No mention of port 23 so I made it another untagged access port for mngt, like ether24. 3. Speaking of ether24, unless its to a smart switch which you didnt indicate it should not be tagged on /interface bridge vlans 4. Ether22 is off bridg...
by anav
Fri Mar 22, 2024 12:48 pm
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

Okay, strange but if you can reach by mac you have access.
As far as packets, as long as your browsing experience is okay I wouldnt worry too much.
The extra rule is designed to ensure browsing performance is the best it can be.
by anav
Fri Mar 22, 2024 2:57 am
Forum: General
Topic: Connect to router LAN side web interface from wireguard tunnel
Replies: 3
Views: 315

Re: Connect to router LAN side web interface from wireguard tunnel

In general one should set the Router ( assuming server for handshake ) the wireguard interface as part of the LAN interface, that then usuallly, through fw rules, allows RWs to access internet via FW rules and DNS services via input chain rules. However your request is to config the router, and in t...
by anav
Fri Mar 22, 2024 2:45 am
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

1. You have three sourcenat rules, get rid of the first one, its incomplete and is just noise. /ip firewall nat add action=masquerade chain=srcnat add action=masquerade chain=srcnat out-interface-list=WAN add action=masquerade chain=srcnat out-interface=wireguard1 2. well it kinda makes sense, since...
by anav
Thu Mar 21, 2024 9:13 pm
Forum: Beginner Basics
Topic: Re: VLAN On Main Router + 2 HAP
Replies: 11
Views: 877

Re: VLAN On Main Router + 2 HAP

For me your missing some glue.
All smart devices should get an IP address on a managment vlan, or at least a trusted vlan like home vlan.
Also I would separate out media devices, from home camera device, from guest wifi, from iot devices, from home trusted vlan
by anav
Thu Mar 21, 2024 9:06 pm
Forum: Announcements
Topic: v7.15beta [testing] is released!
Replies: 408
Views: 74107

Re: v7.15beta [testing] is released!

I would like to know what you are doing here --> *) route - rework of route attributes; Can you post sample text or something, sounds ominous!!! Also, what is meant by: *) wireguard - added option to mark peer as responder only (CLI only); [/i] Is this followup work to this improvement that maybe wa...
by anav
Thu Mar 21, 2024 8:55 pm
Forum: General
Topic: WireGuard Multi-WAN Policy Routing
Replies: 81
Views: 4283

Re: WireGuard Multi-WAN Policy Routing

Drats, I though this one had gotten buried in the sands of time LOL. The first item I think responds to EFFECTS created via BTH and having both client and server devices being able to try and poke holes through non-public IPs using the BTH code and MT provided cloud hole poking server. ( think this ...
by anav
Thu Mar 21, 2024 8:51 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

Before I can make sense of bridge ports and vlans you have to get your story straight on diagrams, not sure if intentionally aim to confuse :-) You claim APS 1-5 by your diagram and in orang text seem to indicate they are on ports 10-18 (9 etherports) carrying vlan100,200 So which is it FIVE APS on ...
by anav
Thu Mar 21, 2024 7:52 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

1. If you think about it, the subnet gateways are considered ROUTER interfaces and thus are normally reachable. However no actual users or devices should be pingable/reachable. 2. Also be aware the 354 is switch and thus routing throughput will be limited. 3. Don't know why you are assigning any PVI...
by anav
Thu Mar 21, 2024 4:19 am
Forum: Beginner Basics
Topic: CCR1036 Was a proplem with version 7
Replies: 12
Views: 1328

Re: CCR1036 Was a proplem with version 7

Why doesnt MT have a return policy for such a device, customer pays for shipping back of defective unit and gets a free replacement or something reasonable etc...
by anav
Thu Mar 21, 2024 2:40 am
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

Sorry I have no experience with the CRS1xx series. The only thing I can tell you is the concepts are the same. There will be a trunk port carrying all the data vlans and management vlan from CRS326 to CRS1XX. What will change is how to setup vlans but the rest of the noise should be similar. The bes...
by anav
Wed Mar 20, 2024 11:10 pm
Forum: Forwarding Protocols
Topic: Documentation on ROS v7 Routing Select Rules?
Replies: 3
Views: 440

Re: Documentation on ROS v7 Routing Select Rules?

you will find out when you need them LOL.
Describe the requirements you have and the design will fall out gracefully
a. identify users/devices
b. identify the traffic they require
c. provde network diagram detailing devices being used, internet connections and intended subnet usage.
by anav
Wed Mar 20, 2024 11:08 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

The CRS112 has to be programmed differently...................... There are probably videos on it to be found..... Also the MT docs should discuss - https://help.mikrotik.com/docs/pages/viewpage.action?pageId=103841836 CRS1xx VLAN Example #############################################################...
by anav
Wed Mar 20, 2024 11:02 pm
Forum: General
Topic: Failover Scare
Replies: 3
Views: 339

Re: Failover Scare

He is using recursive sort of, but also netwatch (vice check-gateway=ping) His problem may be linked to the fact that he used distance=1 for the WAN2-dns vice distance=2 ( main route traffic for same WAN should be same distance) ( dont believe its shown in the pic though, I happen to be clairvoyant ...
by anav
Wed Mar 20, 2024 10:36 pm
Forum: Beginner Basics
Topic: LAN doesn't have internet after changing ISP
Replies: 3
Views: 353

Re: LAN doesn't have internet after changing ISP

The proof is in the config for sure. Strange though all things being equal the config should work as the only change is dhcp client. Perhaps there is an overlap in that the private LAN of the upstream device is the same subnet as the LAN subnet behind the MT ??
by anav
Wed Mar 20, 2024 8:43 pm
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

Yes, some requirements I can chew on. All good info, and I would add that my approach would be an interesting deviation. PRIMARY IS WAN1 if WAN1 fails, BACKUP goes to BOTH WAN2 and WAN3 doing PCC load balancing for standard traffic that was using WAN1. However you have provided good info in that WAN...
by anav
Wed Mar 20, 2024 8:36 pm
Forum: General
Topic: Please verify correct Failover settings?
Replies: 1
Views: 234

Re: Please verify correct Failover settings?

/export file=anynameyouwish (minus router serial number, any public WANIP info, keys, long dhcp lease lists )
by anav
Wed Mar 20, 2024 8:34 pm
Forum: General
Topic: Wireguard Setup
Replies: 14
Views: 755

Re: Wireguard Setup

I have never tried it because its outside of the design as I understand it. I could be wrong though.
by anav
Wed Mar 20, 2024 8:32 pm
Forum: General
Topic: Configuration for hidden ZeroTier features
Replies: 9
Views: 601

Re: Configuration for hidden ZeroTier features

Those are locked features. For $$$ they can be unlocked. ;-) You seem convinced that code is already in the OS, I am not so easily convinced. We have no idea what MT ported across............ Maybe its true and one can only port the entire BLOCK and not partial bits and thus one could say that hooks...
by anav
Wed Mar 20, 2024 8:28 pm
Forum: General
Topic: [Solved] Cannot use LTE without doing outbound traffic first on WAP R AC
Replies: 12
Views: 716

Re: Cannot use LTE without doing outbound traffic first on WAP R AC

Glad its working for you now! (1) Incomplete # add pppoe and lte to WAN /interface list member add interface=pppoe-alpha list=WAN add interface=lte1 list=WAN (2) If what I suspect src-address-list=office is public WANIPs, then you should consider a different approach to reach the router for config p...
by anav
Wed Mar 20, 2024 2:48 pm
Forum: General
Topic: REQUEST: Paid technical support plans
Replies: 16
Views: 854

Re: REQUEST: Paid technical support plans

If you do acquire more staff, I vote for coders and testers. I think you already have a great marketing team and from all outward appearances a strong supportive group of colleagues.
by anav
Wed Mar 20, 2024 1:59 pm
Forum: General
Topic: Possible memory leak in Winbox 7.14?
Replies: 27
Views: 1273

Re: Possible memory leak in Winbox 7.14?

On topic: I can observe growing memory usage as well. Under Linux on Wine but it started off by about 80MB and now after a few hours it is 112M. So slightly growing. But as said: I suspect they are going to fix or hunt down such issues anymore. MT apparently has a "new" WinBox in developm...
by anav
Wed Mar 20, 2024 1:53 pm
Forum: General
Topic: [Solved] Cannot use LTE without doing outbound traffic first on WAP R AC
Replies: 12
Views: 716

Re: Cannot use LTE without doing outbound traffic first on WAP R AC

Okay, the easy explanation is that your ping hits the LTE connection and reaches the router but the router responds via the other WAN as the fiber WAN is primary in terms of routes. To ensure your traffic for WAN2 is responded to via WAN2, you need to mangle. There is no need to do this for WAN1 as ...
by anav
Wed Mar 20, 2024 1:21 pm
Forum: General
Topic: Wireguard Setup
Replies: 14
Views: 755

Re: Wireguard Setup

Hmm you didnt change allowed IPs on router2............ and there is no need for persistent keep alive on the unit that is server for handshake. Should be (R2) : /interface wireguard peers add allowed-address=10.0.0 .1 /32,10.2.1.0/24 interface=wireguard1 \ public-key="R1 PUBLIC KEY " I no...
by anav
Wed Mar 20, 2024 1:13 pm
Forum: General
Topic: Possible memory leak in Winbox 7.14?
Replies: 27
Views: 1273

Re: Possible memory leak in Winbox 7.14?

What does a silly rant about your inability to configure a capac have to with entering a support ticket for winbox ???
by anav
Wed Mar 20, 2024 5:41 am
Forum: Beginner Basics
Topic: Req for Help with Wireguard Config
Replies: 3
Views: 392

Re: Req for Help with Wireguard Config

From: /interface wireguard peers add allowed-address=192.168.40.5/ 24 comment=ChromeBook interface=wireguard1 \ public-key="xxx=" add allowed-address=192.168.40.10/ 24 comment=Phone interface=wireguard1 \ public-key="xxx=" TO: /interface wireguard peers add allowed-address=192.16...
by anav
Wed Mar 20, 2024 5:37 am
Forum: General
Topic: REQUEST: Paid technical support plans
Replies: 16
Views: 854

Re: REQUEST: Paid technical support plans

by anav
Wed Mar 20, 2024 1:55 am
Forum: General
Topic: Wireguard Setup
Replies: 14
Views: 755

Re: Wireguard Setup

Well you have no firewall rules so all should be permitted......... On R2 try adding add chain=input action=accept comment="wg handshake" dst-port=13231 protocol=udp FACEPALM, - we forgot routes ON R1 Add add dst-address=10.1.1.0/24 gateway=wireguard1 routing-table=main comment="route...
by anav
Wed Mar 20, 2024 12:40 am
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

You didnt provide your IP DHCP setup for WAN3 ???? Is isp2 public IP??? Also its not clear why you are mangling. Reasons to mangle. Ensure VPN going to a specific WAN leaves the same WAN ( aka proper router services handling ) Ensure external users going to a server on a specific WAN have their traf...
by anav
Tue Mar 19, 2024 11:57 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

1.'Each RW should have a setup such that you have...' means what? All the devices that are peers ( clients for handshank require basically the same setup ) they need endpoint address, endpoint port, public key of MAIN Router, persistent-keep alive. As for allowed IPs, depends what the needs are ......
by anav
Tue Mar 19, 2024 11:49 pm
Forum: General
Topic: Possible memory leak in Winbox 7.14?
Replies: 27
Views: 1273

Re: Possible memory leak in Winbox 7.14?

kevinds ( quite the opposite actually too ) Im reminded of some sayings.... "The price of inaction is far greater than the cost of making a mistake" "In any moment of decision, the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing yo...
by anav
Tue Mar 19, 2024 11:44 pm
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

The tougher setup is on the RB4011, and how to setup up two switch chips efficiently in a bridge that contains both wan and lan elements.
by anav
Tue Mar 19, 2024 11:43 pm
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

Nope, no firewall rules are required. The idea of accepting the bridge default protocol mode of RTSP and setting ports to EDGE, should ensure no possible cross talk between WAN ports ( and of course the vlan isolation as well ).
by anav
Tue Mar 19, 2024 11:41 pm
Forum: Beginner Basics
Topic: making VLANS + Ubiquiti WIFI
Replies: 5
Views: 549

Re: making VLANS + Ubiquiti WIFI

All very doable.
by anav
Tue Mar 19, 2024 10:54 pm
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

You will not be able to maximize your throughputs as the hex will be one bottleneck and the cable between the two devices the other bottleneck. Suggest you configure ether5 off the bridge first to setup the hex as per the below. Then connect to the hex when behind the RB4011 via ether4, and then mod...
by anav
Tue Mar 19, 2024 10:04 pm
Forum: General
Topic: Wireguard Setup
Replies: 14
Views: 755

Re: Wireguard Setup

# mar/18/2024 23:52:08 by RouterOS 7.8 # software id = # # model = L41G-2axD&FG621-EA # serial number = /interface lte set [ find default-name=lte1 ] allow-roaming=no band="" /interface ethernet set [ find default-name=ether1 ] name="ether1 - WAN" /interface wireguard add li...
by anav
Tue Mar 19, 2024 9:22 pm
Forum: Beginner Basics
Topic: Issues with DNS on router [SOLVED]
Replies: 7
Views: 1918

Re: Issues with DNS on router [SOLVED]

Weird setup?
I see two WANs but are there any users or devices behind the router??
More weirdly trying to create a third WAN via VRF......... as noted I have no clue of the requirements for traffic flow here.
by anav
Tue Mar 19, 2024 9:19 pm
Forum: General
Topic: Possible memory leak in Winbox 7.14?
Replies: 27
Views: 1273

Re: Possible memory leak in Winbox 7.14?

Very logical and well presented holvoe. Concur 100%.
Also I would recommend getting a CHR, one can get a cheap virtual router in the sky to connect all devices, via wireguard and thus all accessible right away.
SSTP as backup since MT to MT can be done easily without certificates
by anav
Tue Mar 19, 2024 9:16 pm
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

UTP cable of what standard ?
What are the throughputs of each ISP??
What is your plan
Use 1, the other 2 are backup. OR . PCC all three used all the time. ??
by anav
Tue Mar 19, 2024 8:23 pm
Forum: General
Topic: Wireguard Setup
Replies: 14
Views: 755

Re: Wireguard Setup

Very confusing setup.
You need to select which one is the server for handshake...........
Also why are your LAN subnets the same behind each router, make them different.
by anav
Tue Mar 19, 2024 8:18 pm
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

Okay thanks for the clarification, by the way if you dont want to mention private subnets, then dont put them in the config or diagram, otherwise terribly confusing. I prefer seeing it all and understanding what you have in mind ref; a. identify all users/devices b. identifying all traffic flows the...
by anav
Tue Mar 19, 2024 7:24 pm
Forum: Beginner Basics
Topic: I'm just not feeling Mikrotik's current product line-up
Replies: 20
Views: 1202

Re: I'm just not feeling Mikrotik's current product line-up

Yeah I thought that might be the reason. On the hAP ax3 though, the PoE port is also the only 2.5 gigabit port. Would this port normally be used as the WAN port or to connect an AP? I wouldn't use the fastest port on router to connect towards ISP ... But that's me, my ISP only offers 1000/100Mbps s...
by anav
Tue Mar 19, 2024 7:17 pm
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

The use of the VRFs is there for a different reason: both ISP1 and ISP2 routers have the same IP i.e. 192.168.1.1 Use of VRFs is warranted if if each router is serving different subnets. VRF is NOT warranted for distribution to the same LAN ( regardless of number of subments ) The simple method pre...
by anav
Tue Mar 19, 2024 7:15 pm
Forum: General
Topic: Wireguard Setup
Replies: 14
Views: 755

Re: Wireguard Setup

Post both configs.
Will assume R1 is the one you want to be the server for handshake.

/export file=anynameyouwish (minus router serial number, public WANIP info, keys, long dhcp lease lists etc.)
by anav
Tue Mar 19, 2024 7:11 pm
Forum: General
Topic: [Solved] Cannot use LTE without doing outbound traffic first on WAP R AC
Replies: 12
Views: 716

Re: Cannot use LTE without doing outbound traffic first on WAP R AC

Yup, will move on. The MT config is an integrated OS, and thus looking at it in snippets is really not fruitful.
by anav
Tue Mar 19, 2024 7:10 pm
Forum: General
Topic: UPnP won't work after literal hours of trying - help pls!
Replies: 12
Views: 658

Re: UPnP won't work after literal hours of trying - help pls!

So AMMO, reading the needle in the haystack are you saying, the OP should not use UPNP but should be using nat-pmp??

https://help.mikrotik.com/docs/display/ROS/NAT-PMP
by anav
Tue Mar 19, 2024 7:05 pm
Forum: General
Topic: Network discovery over wireguard
Replies: 33
Views: 4423

Re: Network discovery over wireguard

Unless you post your config, I am unable to comment
/export file=anyname youwish ( minus router serial number, public WANIP info, keys, long dhcp lease lists etc.)
by anav
Tue Mar 19, 2024 6:59 pm
Forum: General
Topic: UPnP won't work after literal hours of trying - help pls!
Replies: 12
Views: 658

Re: UPnP won't work after literal hours of trying - help pls!

yeah full config. things are not clear. /export file=anynameyouwish ( minus router serial number, any public WANIP info, keys, long dhcp lease lists etc.) Assuming d st-address-list= MyWANIP is a firewall address list entry of either your dyndns URL service, or the iP Cloud service on the router. Th...
by anav
Tue Mar 19, 2024 6:57 pm
Forum: General
Topic: UPnP won't work after literal hours of trying - help pls!
Replies: 12
Views: 658

Re: UPnP won't work after literal hours of trying - help pls!

In terms of firewall rules I prescribe to only allowing traffic and the dropping all else. I also dont think its prudent that all users have access to config the router when they only need access for DNS services. Looking at rules, I have no clue why in heck you are port forwarding wireguard ????? I...
by anav
Tue Mar 19, 2024 6:44 pm
Forum: General
Topic: [Solved] Cannot use LTE without doing outbound traffic first on WAP R AC
Replies: 12
Views: 716

Re: Cannot use LTE without doing outbound traffic first on WAP R AC

that is the crux of the problem, knowing what you want, creating a diagram etc. prior to touching the config- called a plan!!

State your requirements FULLY...
a. identify all users/devices
b. identify what traffic flow they all require

Then we can design the config optimally,
by anav
Tue Mar 19, 2024 6:42 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

Each RW should have a setup such that you have client device generated public key, ==>>>> this gets inserted onto the router on the routers peer settings for the specific RW device IP address ---> as we assigned in the peers settings on the router allowed addresses....... a. if the user also require...
by anav
Tue Mar 19, 2024 5:48 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

In general, one allows traffic to go from client devices to router server ( once a connection is established its peer to peer, really good for two routers, not so significant to a single device........) Therefore its at the router where you want to use firewall rules in the forward chain to state wh...
by anav
Tue Mar 19, 2024 5:33 pm
Forum: General
Topic: [Solved] Cannot use LTE without doing outbound traffic first on WAP R AC
Replies: 12
Views: 716

Re: Cannot use LTE without doing outbound traffic first on WAP R AC

Does the LTE provide you with a public IP. Does the ISP block ICMP pinging. 1. you can remove this default static setting /ip dns static add address=192.168.88.1 comment=defconf name=router.lan 2. Is bufferbloat that bad.......... its not something to use right away as you can no longer use fastrack...
by anav
Tue Mar 19, 2024 2:36 pm
Forum: General
Topic: UPnP won't work after literal hours of trying - help pls!
Replies: 12
Views: 658

Re: UPnP won't work after literal hours of trying - help pls!

I dont see any input chain rules for UPNP on the mikrotik example??

Are there still programs in 2024 requiring UPNP???

Port forwarding fw rule needs work..
by anav
Tue Mar 19, 2024 2:28 pm
Forum: General
Topic: Possible memory leak in Winbox 7.14?
Replies: 27
Views: 1273

Re: Possible memory leak in Winbox 7.14?

Last time, send a report of any kind to MT, stating it here isnt going to fix it.
by anav
Tue Mar 19, 2024 2:26 pm
Forum: Beginner Basics
Topic: I'm just not feeling Mikrotik's current product line-up
Replies: 20
Views: 1202

Re: I'm just not feeling Mikrotik's current product line-up

The AXE3 by far is the best router ( with or without using wireless ) for its price point and features. The RB5009 is by far the best router in its price range of any vendor. However, your approach is all wrong, who gives a flying..........how it looks, does it do the job at a price you can afford. ...
by anav
Tue Mar 19, 2024 2:21 pm
Forum: Beginner Basics
Topic: Lowest price mikrotik home router
Replies: 10
Views: 855

Re: Lowest price mikrotik home router

Too passive for me, state it clearly, and ask for better info up front. Dont be shy............ After all, he is asking before spending and thus deserves clarity............
by anav
Tue Mar 19, 2024 2:18 pm
Forum: Beginner Basics
Topic: Wireguard handshake is succesful but client is unable to access internet
Replies: 3
Views: 435

Re: Wireguard handshake is succesful but client is unable to access internet

NEGATIVE, that is not required in the least!!! Most times sourcenat is required if going out a third party VPN where they only accept one IP at their end!!! (1) set this to NONE< known to cause issues /interface detect-internet set detect-interface-list= NONE (2) You have RED entries which is not a...
by anav
Tue Mar 19, 2024 2:04 pm
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

Well I am surprized because you went down the rabbit hole of a very complex VRF config on one hand, but then seemingly want to avoid like the plague a KISS solution ???
In any case, if there is no issue requiring solving I will move on.
by anav
Tue Mar 19, 2024 2:02 pm
Forum: Beginner Basics
Topic: Lowest price mikrotik home router
Replies: 10
Views: 855

Re: Lowest price mikrotik home router

AXE3, with or without wifi enabled ( aka as a router ) its the best bang for the buck.
Depending upon usage, pair it with capax.

In other words, you could have an AX3 as a central node and run many CAPAXs connected to it.
However your stated requirements are sub-optimal to get a decent response.
by anav
Tue Mar 19, 2024 1:38 pm
Forum: General
Topic: MultiWAN + LAN through vlans [SOLVED]
Replies: 16
Views: 2325

Re: MultiWAN + LAN through vlans [SOLVED]

Just to be clear the RB4001 r2 is acting as a router and has its own SUbnets with DHCP. Your router settings for the ISPs make no sense to me. Why are you using vlans? Why is there only one IP DHCP client when you said all three get assigned that way. why is your single IP DHCP client have v100 mgmt...
by anav
Tue Mar 19, 2024 1:36 pm
Forum: General
Topic: Wireguard Setup
Replies: 14
Views: 755

Re: Wireguard Setup

Which router gets a public IP?
by anav
Tue Mar 19, 2024 1:30 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

Well if its working for you great.
Its not apparent to me how you send two vlans through an access port to dumb devices...........
The diagram does not show smart switches accepting the vlans so its either correct or the config wrong or the diagram is incorrect and the config is okay.
by anav
Tue Mar 19, 2024 2:43 am
Forum: General
Topic: A strange day - VRRP/Wireguard
Replies: 5
Views: 426

Re: A strange day - VRRP/Wireguard

Without a diagram I have no clue what you are trying to do. Any explanation of requirements to date IS NOT user traffic based only, and is confused with config speak, a no no for communicating requirements. Short story, no diagram no user traffic requirements, no diagram, cannot help. Furthermore, w...
by anav
Tue Mar 19, 2024 2:38 am
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

No one can force you to actually fix your config, that motivation has to come from within............
by anav
Tue Mar 19, 2024 12:15 am
Forum: General
Topic: Wireguard, pls explain ( 2 WANS )
Replies: 1
Views: 228

Re: Wireguard, pls explain ( 2 WANS )

Provide phone settings
Provide router settings

In both cases hide any public IPs, keys

/export file=anynameyouwish ( minus router serial number, public WANIP info, keys, long dchp lease lists )
by anav
Tue Mar 19, 2024 12:13 am
Forum: General
Topic: Network discovery over wireguard
Replies: 33
Views: 4423

Re: Network discovery over wireguard

If you actually read my post you would see that you need to create a common intermediary VLAN. ( vlan55 ). ;-)
by anav
Tue Mar 19, 2024 12:10 am
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

The mangle was recommended, not a random suggestions LOL. It does NO HARM to your setup and one never knows what particular website, through the thirdparty VPN, will give the router shits and giggles. So its a good safety net to keep. To improve your setup you can setup both failover on the main WAN...
by anav
Tue Mar 19, 2024 12:03 am
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

Man do I have to state it in writing, your SCOPES are wrong!! LOL The config I gave works, its your config that is broken if it doesnt. I cannot read a winbox jpeg unless its very clealry delineated An RSC script I can read in seconds................... its just a story about requirements I cannot m...
by anav
Tue Mar 19, 2024 12:02 am
Forum: Beginner Basics
Topic: making VLANS + Ubiquiti WIFI
Replies: 5
Views: 549

Re: making VLANS + Ubiquiti WIFI

The switch comes in handy for any traffic within the same vlan from user to another.
The router comes into play between user and internet and traffic between different vlans.
by anav
Tue Mar 19, 2024 12:00 am
Forum: Beginner Basics
Topic: How to allow some mac addresses in firewall/filter rules [SOLVED]
Replies: 13
Views: 1712

Re: How to allow some mac addresses in firewall/filter rules [SOLVED]

Well obviously I thought we were dealing with a router not an access point, which all radio setups have mac-filtering setup for layer2 traffic control ( NOT fw rules )
Again, i should have read more closely, glad you got it sorted.
by anav
Mon Mar 18, 2024 11:03 pm
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

Your discriminatory skills are weak, hint. look at SCOPE!
by anav
Mon Mar 18, 2024 10:59 pm
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

1. Sorry my bad on the TYPO, WG1 is the correct entry on the routing rule to match the routing-table defined. 2. put IP address on your router for wireguard1 as add address=192.168.32.20/24 interface=wireguard1 network=192.168.32.0 3. As long as both WAN interfaces are interface list members of the ...
by anav
Mon Mar 18, 2024 10:56 pm
Forum: Beginner Basics
Topic: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]
Replies: 29
Views: 3669

Re: 2WAN as Failover and Setup Wireguard KEY as Client [SOLVED]

Your routing setup follows nothing of what I suggested. so cannot help you there.
You seem to forget that the handshake starts on your router.........
Best of luck..............
by anav
Mon Mar 18, 2024 9:19 pm
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

Yes, there is, provided above. Probably it didnt work because your recursive was not correct.
by anav
Mon Mar 18, 2024 9:19 pm
Forum: Beginner Basics
Topic: How to allow some mac addresses in firewall/filter rules [SOLVED]
Replies: 13
Views: 1712

Re: How to allow some mac addresses in firewall/filter rules [SOLVED]

Why do you want to use firewall rules, they are for layer3 traffic. if you need something else, I believe you may have success under bridge filters???
by anav
Mon Mar 18, 2024 9:18 pm
Forum: Beginner Basics
Topic: Newbie trying to setup 2.4wifi on Mikrotik RB921GS-5HPacD-15S
Replies: 8
Views: 609

Re: Newbie trying to setup 2.4wifi on Mikrotik RB921GS-5HPacD-15S

Hello, help me. I can't use the forum to ask questions. What do I have to do to be able to do them? As for example in this post it says "It is only visible until the moderator decides. Its a neaderthal approach to ensure your post is not spam, inflammatory etc.................. After a few day...
by anav
Mon Mar 18, 2024 8:51 pm
Forum: General
Topic: WireGuard useful learning [Linux]
Replies: 8
Views: 876

Re: WireGuard useful learning [Linux]

Larsa you need to stay off the magic shrooms. :-)
Next your going to claim you wear a cross, eat garlic and spend hours in front of mirrors.
by anav
Mon Mar 18, 2024 8:49 pm
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

As I stated, thus far no reason to use VRF has been provided and as a matter of fact it would seem NOT appropriate in this case. Further, your recursive is incorrect. Simple solution works: /ip address add address=192.168.1.241 interface=ether1 network=192.168.1.1 add address=192.168.1.242 interface...
by anav
Mon Mar 18, 2024 7:47 pm
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

Well when you post the complete config I can comment. Not sure why you are using VRFs at all, yet.
Assuming its 3 ISP modems into one router.
by anav
Mon Mar 18, 2024 7:44 pm
Forum: General
Topic: gateway spoof
Replies: 12
Views: 1400

Re: gateway spoof

Proper config of the router. It would appear the hacker is not getting into your router but manipulating the traffic reaching his router. The fact that other traffic can reach his device, id indicative of a leaky setup. Post your config /export file=anynameyouwish ( minus public IP address info, any...
by anav
Mon Mar 18, 2024 7:28 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

NM................ There are bigger issues to solve first. 1. WHAT THE HECK is your WAN. You state: am setting up a config for a MT router which is behind NAT a. you have a static WANIP set up for ether1 which bares no resemblance to any of the VLANS. The static IP makes sense but not the subnet?? b...
by anav
Mon Mar 18, 2024 6:34 pm
Forum: Beginner Basics
Topic: Attempting to evolve from caveman's failover
Replies: 58
Views: 8042

Re: Attempting to evolve from caveman's failover

Simple question what if one was to use this in routes..... /ip route add distance=2 dst-address=0.0.0.0/0 gateway= 192.168.1.1%ether1 routing-table=main comment="RouteStarlink" add distance=3 dst-address=0.0.0.0/0 gateway= 192.168.1.1%ether2 routing-table=main comment="RouteOrange&quo...
by anav
Mon Mar 18, 2024 5:05 pm
Forum: Beginner Basics
Topic: Help SSH remote access
Replies: 5
Views: 533

Re: Help SSH remote access

kevinds, next time you fly to Nova Scotia, give me a shout, I think I owe you at least 3 beers :-)
by anav
Mon Mar 18, 2024 5:01 pm
Forum: RouterBOARD hardware
Topic: Many PSU failures in CCR1036
Replies: 43
Views: 2176

Re: Very bad reliability Mikrotik Products and ROS

Well if you consider mikrotik is walking on your network, I suppose tread fits!! ( 'trademark' ). Concur, it seems that we are seeing an incomplete software process or maybe not. First, I blame the beta users, working for free and doing a lousy job of detecting all the new beta firmware problems ;-P...
by anav
Mon Mar 18, 2024 4:51 pm
Forum: Beginner Basics
Topic: TO CAKE OR IS IT BLOAT [SOLVED]
Replies: 2
Views: 1523

TO CAKE OR IS IT BLOAT [SOLVED]

As the question asks.......
What is the point at which losing fastrack and throughput is worth it, vis-a-vis tackling bufferbloat??? ( queueing actually not required )
by anav
Mon Mar 18, 2024 4:49 pm
Forum: Beginner Basics
Topic: Mangle for QoS, CAKE
Replies: 10
Views: 608

Re: Mangle for QoS, CAKE

The question I have is why are you mangling or queueing at all...... You have nothing different in either direction.......... all incoming traffic goes to entire LAN, all outgoing traffic comes from entire LAN. Okay! Its about bufferbloat. For me I would have to weigh any advantage of bufferebloat o...
by anav
Mon Mar 18, 2024 4:37 pm
Forum: Beginner Basics
Topic: Help SSH remote access
Replies: 5
Views: 533

Re: Help SSH remote access

SSH between two MT routers is easy and requires no certificate even, but I only use it as a backup to wireguard.
by anav
Mon Mar 18, 2024 4:28 pm
Forum: General
Topic: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]
Replies: 35
Views: 3864

Re: Wireguard from MT to client (win10) with several users to several VLAN's [SOLVED]

No... /interface wireguard peers add allowed-address= wireguardIP-X/32 interface=wg1 public-key="public-key1" comment=Roadwarrior1 add allowed-address= wireguardIP-Y/32 interface=wg1 public-key="public-key2" comment=Roadwarrior2 add allowed-address= wireguardIP-Z/32 interface=wg1...
by anav
Mon Mar 18, 2024 2:20 pm
Forum: General
Topic: Possible memory leak in Winbox 7.14?
Replies: 27
Views: 1273

Re: Possible memory leak in Winbox 7.14?

Is this a request? Supouts should go to Mikrotik Support if you think there is a bug.
by anav
Mon Mar 18, 2024 1:56 pm
Forum: Beginner Basics
Topic: Req for Help with Wireguard Config
Replies: 3
Views: 392

Re: Req for Help with Wireguard Config

Allowed IPs on the router is wrong....................... You need a separate peer line for each peer, on the router you dont need client endpoint............ /interface wireguard peers add allowed-address=192.168.40.5/32 comment=ChromeBook interface=wireguard1 public-key=**ELIDED** add allowed-addr...
by anav
Mon Mar 18, 2024 1:49 pm
Forum: General
Topic: Fibre ISP - VLAN PPPoe configuration
Replies: 3
Views: 519

Re: Fibre ISP - VLAN PPPoe configuration

Probably something like, assuming connected on ether1 /interface vlan add name=vlan40 interface=ether1 vlan-id=40 /interface pppoe-client add add-default-route=yes interface=vlan40 keepalive-timeout=10 \ name=pppoe-1 use-peer-dns=no user=username password=password /interface list members add interfa...
by anav
Mon Mar 18, 2024 1:36 pm
Forum: General
Topic: SSTP Mikrotik Client / probably bug 6.41.3
Replies: 17
Views: 6349

Re: SSTP Mikrotik Client / probably bug 6.41.3

Or time for a trip, sooner or later having remote devices means a trip. With wireguard and ver7 software probably soon.
It should be a built in plan to any IT equipment anyway.
by anav
Sun Mar 17, 2024 11:29 pm
Forum: Beginner Basics
Topic: CRS354 - vlans work only with specific networks
Replies: 4
Views: 359

Re: CRS354 - vlans work only with specific networks

For all your switches, only the manag3ment vlan need be identified..... (assuming its 192.168.251.0/24) I would take one port off bridge and use it as an emerg access like give it an IP address of 192.168.55.1/24 and then any pc with IPV4 settings set to 192.168.55.5 for example and your in! /interf...
by anav
Sun Mar 17, 2024 11:19 pm
Forum: Beginner Basics
Topic: 3-ISPs Load Balancing - need help [SOLVED]
Replies: 51
Views: 4241

Re: 3-ISPs Load Balancing - need help [SOLVED]

If you have an issue please start a new thread
by anav
Sun Mar 17, 2024 11:12 pm
Forum: General
Topic: Block WebSites (Social Network, Youtube, etc)
Replies: 2
Views: 281

Re: Block WebSites (Social Network, Youtube, etc)

Not possible with the MT device, there are too many ways around the programming.
You need to get a router that does DPI $$$, and then pay their subscription service more $$$$.
by anav
Sun Mar 17, 2024 5:17 pm
Forum: General
Topic: VLANs between Unifi and MikroTik [SOLVED]
Replies: 10
Views: 1895

Re: VLANs between Unifi and MikroTik [SOLVED]

Assuming for example vlan3 gateway is 192.168.33.1 (1) Why do you assign a PVID on the trunk port?? Remove it. add bridge=bridge frame-types=admit-only-vlan-tagged interface=ether1 pvid=3 (2) You can add to each bridge port ingress-filtering=yes (3) There is no need set dhcp client, this is a privat...
by anav
Sun Mar 17, 2024 3:00 pm
Forum: General
Topic: Network discovery over wireguard
Replies: 33
Views: 4423

Re: Network discovery over wireguard

Here is one link to such an approach - https://forum.mikrotik.com/viewtopic.php?t=194842 and another. Discovery Between Two Locations SOLUTION METHOD ADD A CONNECTING SUBNET/INTERMEDIARY - EOIP OVER WIREGUARD a. create wireguard connectivity as per normal and then b. create the EOIP tunnel within th...
by anav
Sun Mar 17, 2024 2:03 am
Forum: General
Topic: How to exchange internet connection between 2 oficces.
Replies: 3
Views: 571

Re: How to exchange internet connection between 2 oficces.

Good question. Trying to think conceptually. Assuming you have one common cable over which to do this work, I would probably use two different VLANS. At each Router, one of the vlans would be an incoming WAN connection from the other Router. Via a private subnet. on ETHERPORT XY. At each Router the ...
by anav
Sun Mar 17, 2024 1:32 am
Forum: Beginner Basics
Topic: Winbox QoS ?
Replies: 3
Views: 377

Re: Winbox QoS ?

You are not alone, the documentation makes one believe its all there but............. its hiding well!!!! +++++++++++++++++++++++++++++++++++++++++ Planned QoS implementation phases: QoS Marking. QoS profile matching by ingress packet headers, then egress header alternation according to the assigned...
by anav
Sat Mar 16, 2024 10:53 pm
Forum: General
Topic: Anyone tested the new L009?
Replies: 16
Views: 4417

Re: Anyone tested the new L009?

I stand corrected! Thanks for that and I owe Loop an apology!!
Interestingly I have no problems with CPU usage or performance to date.
by anav
Sat Mar 16, 2024 9:50 pm
Forum: General
Topic: MikroTik hAP ax3 - bridge mode for WiFi.
Replies: 10
Views: 653

Re: MikroTik hAP ax3 - bridge mode for WiFi.

Post your config and I can comment on what should be changed if anything.
By the way, there is a route on the config provided ??
by anav
Sat Mar 16, 2024 7:11 pm
Forum: Beginner Basics
Topic: Redirect to external Public IP [SOLVED]
Replies: 19
Views: 2405

Re: Redirect to external Public IP [SOLVED]

/export file=anynameyouwish ( minus PUBLIC IP information, KEYS, long dhcp lease lists, etc..) There should be relatively little else to scrub ( possibly some names you give to things, comments etc..... ) Use code block to limit visible length and improved readability ( on same line as Bold and Unde...
by anav
Sat Mar 16, 2024 7:06 pm
Forum: General
Topic: MikroTik hAP ax3 - bridge mode for WiFi.
Replies: 10
Views: 653

Re: MikroTik hAP ax3 - bridge mode for WiFi.

Okay so you want it to be an access point switch, not sure why that is so hard to say. In that case, the default config is rather simple Nothing much other than bridge, WIFI settings bridge ports ( assuming ether1 is connected to the UDM ) /interface bridge port add bridge=bridge comment=defconf int...
by anav
Sat Mar 16, 2024 6:50 pm
Forum: General
Topic: Reset Button Hold Time (New feature)
Replies: 7
Views: 1478

Re: Reset Button Hold Time (New feature)

There is no such feature .............its actually called something else! To gain access to this function you have to really mean to do it, aka hard to do by accident. Its not clear how you managed to do this but not understand the ramifications are surprising. What there is are two relatively newis...
by anav
Sat Mar 16, 2024 6:40 pm
Forum: General
Topic: MikroTik hAP ax3 - bridge mode for WiFi.
Replies: 10
Views: 653

Re: MikroTik hAP ax3 - bridge mode for WiFi.

Yes it will be a problem to have two dhcp servers on the same network. Remove the UDM router it serves no purpose and only use the HAPAX3. The reason being that for all layer3 needs, the devices will go to the UDM and not to the hapax3. So you need to decide. Will the hapax simply act as a switch/AP...
by anav
Sat Mar 16, 2024 6:35 pm
Forum: Wireless Networking
Topic: Unifi Network Controller via Mikrotik Wireless Setup
Replies: 2
Views: 298

Re: Unifi Network Controller via Mikrotik Wireless Setup

The diagram labelling needs work. How do vlans 1920,1930 just popup out of the blue ( actually red and orange) for example. They should be traceable back to the 750. Its also not clear what is the management VLAN ( the vlan where every smart device should get its IP address from ). It would appear t...
by anav
Sat Mar 16, 2024 6:29 pm
Forum: Beginner Basics
Topic: Redirect to external Public IP [SOLVED]
Replies: 19
Views: 2405

Re: Redirect to external Public IP [SOLVED]

The point being, the OP should have provided his complete config on the first post........................
Another waste of a chasing thread because there is no first post process....... thankyou MT.
by anav
Sat Mar 16, 2024 6:22 pm
Forum: General
Topic: MikroTik hAP ax3 - bridge mode for WiFi.
Replies: 10
Views: 653

Re: MikroTik hAP ax3 - bridge mode for WiFi.

WAIT ONE - do you mean your hapax is only acting as a switch?? The below advice presumed that your hapax3 was connected to the internet via a modem and received a public IP. Do you actually mean your connected to an upstream router which provides a private LAN in the range 10.10.10.X ??? ++++++++++...
by anav
Sat Mar 16, 2024 5:52 pm
Forum: General
Topic: MikroTik hAP ax3 - bridge mode for WiFi.
Replies: 10
Views: 653

Re: MikroTik hAP ax3 - bridge mode for WiFi.

Who said you cannot use the hapax3 in bridge mode? I have the hapax3 and am using vlan-filtering with hardware offload.
This is a very capable router!!
by anav
Sat Mar 16, 2024 5:30 pm
Forum: Beginner Basics
Topic: Chateau LTE18 ax becomes zombie when lightly touched
Replies: 1
Views: 241

Re: Chateau LTE18 ax becomes zombie when lightly touched

Seems like a loose connector or something internally?
Might have to go through vendor to get an RMA?
by anav
Sat Mar 16, 2024 5:28 pm
Forum: Wireless Networking
Topic: Finally success - 802.11r/k/v fast roaming works reliably with WifiWave2
Replies: 53
Views: 13804

Re: Finally success - 802.11r/k/v fast roaming works reliably with WifiWave2

Concur, the setup process and menu selections are not intuitive and its easy to get lost, ( especially how there are hidden defaults etc. ) I am not a fan of how they have chosen to give flexibility, or more accurately how clear it is to the admin, what is actually configured. Dont feel bad, you are...
by anav
Sat Mar 16, 2024 5:24 pm
Forum: Wireless Networking
Topic: hAP-ax3 vs cAP ax
Replies: 11
Views: 1373

Re: hAP-ax3 vs cAP ax

Not sure about latest renditions of WIFI, but most devices probably have a useful limit of around 20-30 active devices. Some devices are specifically made for larger numbers but that is a niche market.(ruckus comes to mind). With newer technologies mu-mimo and latest 6e and 7 technology, dont know. ...
by anav
Sat Mar 16, 2024 5:14 pm
Forum: Wireless Networking
Topic: Is it possible to install WiFi package on L009UiGS-RM? [SOLVED]
Replies: 10
Views: 3015

Re: Is it possible to install WiFi package on L009UiGS-RM? [SOLVED]

Any RoS device should be able to function as a capsman controller was my understanding. Requirements Any RouterOS device can be a controlled wireless access point (CAP) as long as it has at least a Level 4 RouterOS license CAPsMAN server can be installed on any RouterOS device, even if the device it...
by anav
Sat Mar 16, 2024 3:51 am
Forum: Beginner Basics
Topic: port forwarding problem
Replies: 9
Views: 610

Re: port forwarding problem

Isnt the first non code block config and wont be the last........... you can thank Normis for ensuring the resulting the first posting experience of new users and those supporting them :-)
by anav
Fri Mar 15, 2024 11:18 pm
Forum: General
Topic: Wires Only Leased Line Hardware Recommendation
Replies: 10
Views: 895

Re: Wires Only Leased Line Hardware Recommendation

Not clear enough, do you mean each customer, each public IP should see approx 1gig up and down, or do they share a 1 gig pipe??
If just an edge type router the RB5009 should do fine 4x1 gig, throughput is well north of 4gigs in this scenario.
by anav
Fri Mar 15, 2024 8:40 pm
Forum: Scripting
Topic: Router maybe is hacked. Please help
Replies: 7
Views: 444

Re: Router maybe is hacked. Please help

Unplug router from internet. Netinstall latest stable firmware Put back config WITHOUT any port forwarding. a. think about having ONLY a server with a secure login process b. think about limiting in source address list which public IPs can access server. c. even better use wireguard and have people ...
by anav
Fri Mar 15, 2024 8:35 pm
Forum: Wireless Networking
Topic: hap ax3 other antennas
Replies: 8
Views: 538

Re: hap ax3 other antennas

Okay now you have me thinking perhaps repace my AX3s with these bad boys. https://www.amazon.ca/Portable-Antenna-Dual-Band-Omnidirectional-Router/dp/B08LZHV83P/ref=sr_1_7?crid=2LK4POLSJPVAY&dib=eyJ2IjoiMSJ9.d7o75FpnshnrVKGe5-c-B68HFFzp0iKhzPKsakuKGUIZn-erRPTYVZjKSuecgvF_aAxk649CL4RzmR20jM6Qn8jXN...
by anav
Fri Mar 15, 2024 8:29 pm
Forum: Forwarding Protocols
Topic: CCR2004-1G-12S+2XS vs CCR1036-12G-4S
Replies: 6
Views: 775

Re: CCR2004-1G-12S+2XS vs CCR1036-12G-4S

The 2114 then is your best bet comes with four 10Gig ports
by anav
Fri Mar 15, 2024 8:28 pm
Forum: General
Topic: Wires Only Leased Line Hardware Recommendation
Replies: 10
Views: 895

Re: Wires Only Leased Line Hardware Recommendation

It should be similar on MT router. I am no multi-WAN guru, but basically from what I have seen, A block of IPs is given to the admin, One IP address is used for the router itself, ( nat or no nat, depends on what the op wants to provide on this router ), the rest of the WANIPs can be netmapped to do...
by anav
Fri Mar 15, 2024 8:24 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2103

Re: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

One bridge............., chalk this up to another poster child for Normis' inaction on first posting process.... And they will keep coming day after day after day..................
by anav
Fri Mar 15, 2024 8:23 pm
Forum: General
Topic: CRS310-8G+2S to split WAN connection
Replies: 29
Views: 1356

Re: CRS310-8G+2S to split WAN connection

Sweet, KISS, thanks for the feedback.
by anav
Fri Mar 15, 2024 8:22 pm
Forum: General
Topic: OpenVPN not working
Replies: 4
Views: 306

Re: OpenVPN not working

Yes, but one cannot hang onto betamax forever..............
Heck even my mother in law, is sticking to CABLE TV vice streaming lets say over my appletv.......
Guess what, she upgraded her TV service and they are using android TV boxes LOL.
by anav
Fri Mar 15, 2024 8:20 pm
Forum: Beginner Basics
Topic: Load Balance for LAN
Replies: 13
Views: 733

Re: Load Balance for LAN

Zing over my head, what is the OP trying to do..... thats not available in queues, for example.
by anav
Fri Mar 15, 2024 6:15 pm
Forum: Beginner Basics
Topic: Load Balance for LAN
Replies: 13
Views: 733

Re: Load Balance for LAN

Okay so you want queues then??
by anav
Fri Mar 15, 2024 5:15 pm
Forum: General
Topic: Anyone tested the new L009?
Replies: 16
Views: 4417

Re: Anyone tested the new L009?

jargon voor afval, Sorry Loop, disagree! The 1009 2.5 port is a mystery to me as its real world WAN throughput is 300-400Mbps whereas the old hex will get you 400-500 Mbps. Both have two cores.......... The AX3 will get you over 1Gbps and has 4 cores and double the RAM of the L1009, its no contest, ...
by anav
Fri Mar 15, 2024 4:57 pm
Forum: General
Topic: OpenVPN not working
Replies: 4
Views: 306

Re: OpenVPN not working

Have you considered VPN that is better supported by MT such as wireguard??
by anav
Fri Mar 15, 2024 4:56 pm
Forum: General
Topic: Wires Only Leased Line Hardware Recommendation
Replies: 10
Views: 895

Re: Wires Only Leased Line Hardware Recommendation

Nicely worded statement to induce confusion :-). Wired and then point to point. Do you mean you need a router to terminate a land line connection and then equipment to take that signal over the airwaves in a point to point wifi type setup back to another wired device ????????? Request is too vague, ...
by anav
Fri Mar 15, 2024 4:52 pm
Forum: General
Topic: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]
Replies: 13
Views: 2103

Re: RB5009UG+S+ download speed 600/1000 upload 800+/1000 [SOLVED]

Its all conjecture and opinion without facts.....................
by anav
Fri Mar 15, 2024 4:51 pm
Forum: Beginner Basics
Topic: Using a wireguard VPN, access servers that are in a vlan.
Replies: 4
Views: 373

Re: Using a wireguard VPN, access servers that are in a vlan.

What is preventing the CGNAT LTE (second link) from being used recursively on your home router??
All devices can connect to your home router through the public IP, no need for CHR again.
by anav
Fri Mar 15, 2024 4:48 pm
Forum: Beginner Basics
Topic: Load Balance for LAN
Replies: 13
Views: 733

Re: Load Balance for LAN

Diagram and included detail is helpful. However this statement needs to be broken down AS requested - it makes zero sense as stated...... Now, I want to create a simple load balancer on e.g. 192.168.35.1/16 for these machines so LAN for LAN, WAN is no matter in this scheme Identify users/devices Ide...
by anav
Fri Mar 15, 2024 4:44 pm
Forum: Beginner Basics
Topic: mikrotik vlan mgmt, access ptp connect [SOLVED]
Replies: 2
Views: 1448

Re: mikrotik vlan mgmt, access ptp connect [SOLVED]

What your missing is that each smart device should get an IP from a management vlan. Data vlans 17 and 89 are carried forward to each smart device as well. Assuming that the ROUTER has its own internal LAN, wheras, the receiver/txitter are acting solely as AP/switches and do not need an internal LAN...
by anav
Fri Mar 15, 2024 3:39 pm
Forum: Beginner Basics
Topic: Redirect to external Public IP [SOLVED]
Replies: 19
Views: 2405

Re: Redirect to external Public IP [SOLVED]

Still makes no sense....... Oh well, I will move on.
by anav
Fri Mar 15, 2024 3:24 pm
Forum: Beginner Basics
Topic: Separate filter rule for separate port
Replies: 5
Views: 356

Re: Separate filter rule for separate port

(1) I am not a queue user but there must be an easier way to do queues than what your config shows................. It would seem like you manually attributed queues on a per IP basis?? (2) Set this to none, as this setting has been known to cause weird issues and is not really needed. /interface de...
by anav
Fri Mar 15, 2024 12:44 pm
Forum: General
Topic: Interface list for multiple bridges? [SOLVED]
Replies: 4
Views: 1634

Re: Interface list for multiple bridges? [SOLVED]

More efficient to use vlans and one bridge in most cases but concur with jaclaz's approach to fw rules, if sticking with two bridges......
KISS.
by anav
Fri Mar 15, 2024 12:41 pm
Forum: General
Topic: Wireguard tunnel local LAN
Replies: 16
Views: 980

Re: Wireguard tunnel local LAN

As holvoe noted, lets say take ether5 off the bridge. give it an Ip address add address=192.168.55.1/24 interface=ether5 network=192.168.55.0 Ensure ether5 is part of LAN LIST on interface members. Then to complete the config do it by connecting your PC to ether5 and give the pc an IPV4 address stat...
by anav
Fri Mar 15, 2024 4:16 am
Forum: Beginner Basics
Topic: port forwarding problem
Replies: 9
Views: 610

Re: port forwarding problem

Best to clean up the config and if still having issue post the latest config............
by anav
Thu Mar 14, 2024 11:26 pm
Forum: Beginner Basics
Topic: port forwarding problem
Replies: 9
Views: 610

Re: port forwarding problem

I use winbox, but webconfig should suffice. You already have a masquerade rule.
by anav
Thu Mar 14, 2024 10:38 pm
Forum: General
Topic: Temporary loss of access to network without disconnecting to AP
Replies: 7
Views: 456

Re: Temporary loss of access to network without disconnecting to AP

Hi holvoe, so you are saying that we should set bridge to what setting ......and from 7,14 onwards.....
by anav
Thu Mar 14, 2024 9:15 pm
Forum: Beginner Basics
Topic: port forwarding problem
Replies: 9
Views: 610

Re: port forwarding problem

(1) slight mod to dns.. /ip dns set allow-remote-requests=yes servers=1.1.1.1 REMOVE the following default.......... /ip dns static add address=192.168.88.1 comment=defconf name=router.lan (2) Take this default rule and create three new rules......... Clearer and better security. add action=drop cha...
by anav
Thu Mar 14, 2024 8:27 pm
Forum: General
Topic: DDNS configuration with 2 links
Replies: 7
Views: 373

Re: DDNS configuration with 2 links

I gather WAN1 is primary and WAN2 is secondary?
Is there any traffic for WAN2 even when WAN1 is up and running??
by anav
Thu Mar 14, 2024 8:26 pm
Forum: General
Topic: DDNS configuration with 2 links
Replies: 7
Views: 373

Re: DDNS configuration with 2 links

/ip route add check-gateway=ping distance= 2 dst-address=0.0.0.0/0 gateway=8.8.8.8 \ routing-table=main scope= 30 target-scope=11 add check-gateway=ping distance= 3 dst-address=0.0.0.0/0 gateway=8.8.4.4 \ routing-table=main scope= 30 target-scope=11 +++++++++++++++++++++++++++++++++++++++++++++++++...
by anav
Thu Mar 14, 2024 8:08 pm
Forum: General
Topic: DDNS configuration with 2 links
Replies: 7
Views: 373

Re: DDNS configuration with 2 links

The config was not really what I was asking for but since you did post it your routes are hosed/incorrect. More on that later. So the script finds the new IP for WAN1 and WAN2 locally on the router, and sends it to the dyndns website and updates it............. ?? To confirm, though it would appear ...
by anav
Thu Mar 14, 2024 7:48 pm
Forum: Beginner Basics
Topic: port forwarding problem
Replies: 9
Views: 610

Re: port forwarding problem

No idea without seeing the config.
by anav
Thu Mar 14, 2024 7:43 pm
Forum: Beginner Basics
Topic: Help SSH remote access
Replies: 5
Views: 533

Re: Help SSH remote access

The problem is either the configuration on your CHR MT router, or your home MT router.
https://help.mikrotik.com/docs/display/ROS/SSH
https://www.youtube.com/results?search_ ... h+mikrotik
by anav
Thu Mar 14, 2024 7:41 pm
Forum: General
Topic: CCR with a embedded LTE modem?
Replies: 6
Views: 371

Re: CCR with a embedded LTE modem?

To be honest I agree with holvoe, whatever market your trying to satisify it must be rather niche. It makes little sense to me to pair LTE with CCR2XXX products. Instead for CPE boxes look more at the chateau lineup. If you need outdoor antennas look at the ATL LTE 18 kit....... You would have to as...
by anav
Thu Mar 14, 2024 7:35 pm
Forum: General
Topic: DDNS configuration with 2 links
Replies: 7
Views: 373

Re: DDNS configuration with 2 links

You need to clarify....
a. who or what has a script?
b. where is this script aimed at.
c. what is the current configuration of your router ( vis-a-vis WAN setup ).
by anav
Thu Mar 14, 2024 6:08 pm
Forum: General
Topic: CCR with a embedded LTE modem?
Replies: 6
Views: 371

Re: CCR with a embedded LTE modem?

Know very little about LTE and routers, but if its like wifi, then LTE is probably best handled separately a. you can place LTE device where best suited, b. separate device can have a wide variety of antennae and type configurations c. can more easily change and or upgrade device without affecting r...
by anav
Thu Mar 14, 2024 5:48 pm
Forum: General
Topic: CRS310-8G+2S to split WAN connection
Replies: 29
Views: 1356

Re: CRS310-8G+2S to split WAN connection

No idea what you are doing now LOL......... I was strictly looking at the IPs to Routers work. You want each RX to send traffic from its assigned IP, You want each RX to only respond to arp requests for itself. ( maybe blocking arp requests to any other address than the allotted one is a better appr...
by anav
Thu Mar 14, 2024 5:31 pm
Forum: Beginner Basics
Topic: Separate filter rule for separate port
Replies: 5
Views: 356

Re: Separate filter rule for separate port

Without understanding how your rules are currently setup, it would be presumptive to come up with any solution as it would be guessing . One should realize that rules are integrated and can affect other rules and thus the flow of traffic. Others waste all our time by such frivolous attempts and quit...
by anav
Thu Mar 14, 2024 5:20 pm
Forum: General
Topic: CRS310-8G+2S to split WAN connection
Replies: 29
Views: 1356

Re: CRS310-8G+2S to split WAN connection

Quick set should be avoided for sure........... The idea of the bridge filter rules was to ensure the assignment sticks ( wan1 to R1 etc.........). My guess is that intended traffic between WANIPs, should not affected as the traffic would go to the ISP provider and then return, vice attempt to conne...
by anav
Thu Mar 14, 2024 5:02 pm
Forum: General
Topic: DDNS configuration with 2 links
Replies: 7
Views: 373

Re: DDNS configuration with 2 links

Typically a dyndns link to a public IP, is to ONE public IP not two and more specifically to the primary ACTIVE wanip.
If you have two active WANIPs, then you need two dyndns URLs to access them.
Not sure if that answers your question.
by anav
Thu Mar 14, 2024 4:31 pm
Forum: General
Topic: A place for poetry
Replies: 63
Views: 247261

Re: A place for poetry

Config a mess,
need to confess!
A script I'm told would be gold!
:If true , do { find a guru
then how much $$$$$$ ?
}
by anav
Thu Mar 14, 2024 4:24 pm
Forum: General
Topic: WireGuard Handshake
Replies: 4
Views: 317

Re: WireGuard Handshake

In the immortal words of some short guy......
Help me Help you!
by anav
Thu Mar 14, 2024 4:19 pm
Forum: Scripting
Topic: Mikrotik script syntax highlight [SOLVED]
Replies: 10
Views: 1251

Re: Mikrotik script syntax highlight [SOLVED]

Amazing work................. both AMMO and rextended seem more comfortable with syntax than most are with adding a vlan to a pppoe interface...........
by anav
Thu Mar 14, 2024 3:48 pm
Forum: General
Topic: CRS310-8G+2S to split WAN connection
Replies: 29
Views: 1356

Re: CRS310-8G+2S to split WAN connection

Understood but it was material, one should not have floating unused ports on any configuration unless one knows that they will be used in the future. Thus if the OP had stated 4 now and possibly more WANS later, all the power to you, otherwise, its junk and security wise poor design. Caveat I have n...
by anav
Thu Mar 14, 2024 3:43 pm
Forum: General
Topic: Implementing MikroTik Solutions for a New Business
Replies: 2
Views: 265

Re: Implementing MikroTik Solutions for a New Business

They can also answer your homework questions as well. :-)
by anav
Thu Mar 14, 2024 3:35 pm
Forum: General
Topic: Bridge and Web Interface - RESOLVED [SOLVED]
Replies: 15
Views: 1619

Re: Bridge and Web Interface - RESOLVED [SOLVED]

To your first post --> https://help.mikrotik.com/docs/display/ROS/MAC+server Since there is no problem or issue you need rectified but are seeking knowledge. Suggest start by reading the appropriate documentation applicable to your area of interest. - https://help.mikrotik.com/docs/display/ROS/Route...
by anav
Thu Mar 14, 2024 5:03 am
Forum: General
Topic: CRS310-8G+2S to split WAN connection
Replies: 29
Views: 1356

Re: CRS310-8G+2S to split WAN connection

No worries, If not useful so be it. @tangent, did you read the first line of the OPs first post?? have a CRS310-8G+2S that needs to go between my fiber modem and 4 routers to split the WAN connection between the routers (technical requirement). Our current He goes on to state in another line ether4-...
by anav
Thu Mar 14, 2024 3:17 am
Forum: Beginner Basics
Topic: Load Balance for LAN
Replies: 13
Views: 733

Re: Load Balance for LAN

Its not just a matter of details, its ensuring the OP has a clear understanding of what is required and has an actual plan.
by anav
Thu Mar 14, 2024 3:15 am
Forum: General
Topic: CRS310-8G+2S to split WAN connection
Replies: 29
Views: 1356

Re: CRS310-8G+2S to split WAN connection

I see this similarly (except using basic math if you have four routers you need four ports 4,5,6,7 [ including port 8 would make 5 there tangent ;-) ] I will take a stab at this for grins and giggles......... Not an expert so it could be useless. a. the switch is connected to the network via the man...
by anav
Thu Mar 14, 2024 2:25 am
Forum: Beginner Basics
Topic: Stuck no internet on CRS326 behind RB4011 [SOLVED]
Replies: 10
Views: 1657

Re: Stuck no internet on CRS326 behind RB4011 [SOLVED]

Yes I am the admin and wish to eliminate them LOL.........
by anav
Thu Mar 14, 2024 2:25 am
Forum: Beginner Basics
Topic: Load Balance for LAN
Replies: 13
Views: 733

Re: Load Balance for LAN

A clear set of requirements will lead to an optimal design a. identify all users/devices that will interact on the network ( internal, external including admin) b. identify all traffic flows they require draw a diagram of what you wish to accomplish, identifying devices, WAN, vlans etc. post your co...
by anav
Thu Mar 14, 2024 2:22 am
Forum: General
Topic: Bridge and Web Interface - RESOLVED [SOLVED]
Replies: 15
Views: 1619

Re: Bridge and Web Interface [SOLVED]

Guessing is a waste of time, get facts!
by anav
Wed Mar 13, 2024 10:37 pm
Forum: General
Topic: Use Mikrotik's HotSpot solution to unblock Wireguard???
Replies: 24
Views: 1730

Re: Use Mikrotik's HotSpot solution to unblock Wireguard???

Yikes, cant imagine doing that for 150 users........
by anav
Wed Mar 13, 2024 7:35 pm
Forum: Scripting
Topic: ✂ Rextended Fragments of Snippets
Replies: 96
Views: 63099

Re: ✂ Rextended Fragments of Snippets

Sertik, most of the angst caused is a cumulative thing. When like rextended, one has answered, day in day out, post after post that has zero quality control its very hard to remain patient and one justs gets to the point directly!! ( you have heard of RSI (injury)). Over the years, having been invol...
by anav
Wed Mar 13, 2024 7:00 pm
Forum: General
Topic: Hex Lite and NTP client updates
Replies: 28
Views: 1465

Re: Hex Lite and NTP client updates

I think I understand how it works now and am asking pe1chl to confirm, if I have it right, partially right or wrong.
It certainly wasn't a question posed to you, but if you are happy to answer....... :-) ( or trying to pad posting stats LOL )
by anav
Wed Mar 13, 2024 6:39 pm
Forum: General
Topic: Hex Lite and NTP client updates
Replies: 28
Views: 1465

Re: Hex Lite and NTP client updates

Sure was, I hope I dont get interviewed by Hur,,,,, guess I'm too old to run for president.
( note probably at that instance I didnt understand what the fix entailed regarding traffic flow and just assumed it would work )
  • 1
  • 2
  • 3
  • 4
  • 5
  • 65