Community discussions

Search found 111 matches

by xbaha
Thu Sep 06, 2012 4:52 pm
Forum: General
Topic: How to Access ROS from the internet without public IP?
Replies: 3
Views: 800

Re: Odp: How to Access ROS from the internet without public

I haven't tried it on my own yet, but one possible way I can think of is to establish a vpn like connection, i.e. PPTP to a site that has a public IP and bridge the subnets together. Then on the host with public IP you would set up port forwarding to ports on your PPTP client. Another method involv...
by xbaha
Thu Sep 06, 2012 1:44 pm
Forum: General
Topic: How to Access ROS from the internet without public IP?
Replies: 3
Views: 800

How to Access ROS from the internet without public IP?

hi recently, in many countries, if you your MT device has 3G access, your ISP will not give you a public IP, also, some ISPs now even with DSL will not give you a public ip, ISP have 1 public IP natted to many clients. in such a case, we need a server that MT will communicate with, the server will o...
by xbaha
Thu May 03, 2012 12:42 am
Forum: Virtualization
Topic: mikrotik and elastix
Replies: 4
Views: 5109

Re: mikrotik and elastix

==> you're not going to have much luck using KVM as there's no-way in the mikrotik implementation to configure hardware pass through to the virtual machines

can you explain why?
by xbaha
Wed May 02, 2012 9:09 pm
Forum: General
Topic: MT IOS and Asterisk
Replies: 9
Views: 1866

Re: MT IOS and Asterisk

i added PCI card, but its not recognized by the guest, is it possible to the guest to use the PCI directly? what do i need to do?? thanks
by xbaha
Wed Apr 11, 2012 11:31 am
Forum: General
Topic: MT IOS and Asterisk
Replies: 9
Views: 1866

Re: MT IOS and Asterisk

Thanks
What if i added a PCI card, how is it going to be handled?

thanks
by xbaha
Tue Apr 10, 2012 10:24 am
Forum: General
Topic: MT IOS and Asterisk
Replies: 9
Views: 1866

Re: MT IOS and Asterisk

you have done it before?
were they running at the same time (i.e. i can access asterisk and MT at the same time, not an option to boot one of them) ...
the reason is x86 is too much for MT, need to utilize it more!
by xbaha
Mon Apr 09, 2012 11:44 am
Forum: General
Topic: MT IOS and Asterisk
Replies: 9
Views: 1866

MT IOS and Asterisk

was anyone able to install both MT and asterisk on one x86 machine?
how is that possible and where to begin?
pls share ..
thanks..
by xbaha
Sun Apr 01, 2012 4:30 pm
Forum: Wireless Networking
Topic: solar power with lithium-ion battery
Replies: 3
Views: 996

Re: solar power with lithium-ion battery

any recommendation for a good controller?
by xbaha
Mon Mar 26, 2012 11:18 am
Forum: Wireless Networking
Topic: solar power with lithium-ion battery
Replies: 3
Views: 996

solar power with lithium-ion battery

hi, i am planing to make a charged RB with solar system, but instead of traditional acid, i want to use lithium-ion battery because of weight issues. i was reading recently about some differences and i had 2 major points to consider: 1. if the solar voltage dropped below the source voltage, a diode ...
by xbaha
Sun Jun 19, 2011 3:43 pm
Forum: RouterBOARD hardware
Topic: RB411A dead
Replies: 0
Views: 441

RB411A dead

i have RB411A,
when i power it up, the blue led is up, and all the small yellow leds are up, and nothing happen after that.
i tried serial terminal 115200bit/s, 8 data bits, 1 stop bit, no parity, flow control=none, i didn't receive anything.

any suggestions plz?

thanks.
by xbaha
Tue Oct 12, 2010 1:17 am
Forum: Beginner Basics
Topic: Add new hardware, and a new interface
Replies: 5
Views: 1174

Re: Add new hardware, and a new interface

but it shows in the USB list and correct REALTEK and correct version!
by xbaha
Mon Oct 11, 2010 11:41 pm
Forum: Beginner Basics
Topic: Add new hardware, and a new interface
Replies: 5
Views: 1174

Re: Add new hardware, and a new interface

i am facing same issue, how can this interface be displayed under wireless tab????
please any help!
by xbaha
Tue Jul 27, 2010 7:25 pm
Forum: General
Topic: USB WIFI
Replies: 3
Views: 1263

Re: USB WIFI

USB WIFI can be used as a client as well as AP,
i have it running under XP...

other suggestions?
by xbaha
Tue Jul 27, 2010 2:06 pm
Forum: General
Topic: USB WIFI
Replies: 3
Views: 1263

USB WIFI

hi, i would like to onnect the RB to a USB WIFI, i didnt see any in the hardware supported devices list... has anyoe done this before?

thanks
by xbaha
Sat May 01, 2010 5:42 am
Forum: RouterBOARD hardware
Topic: atheros on micro pci
Replies: 1
Views: 552

atheros on micro pci

i want to buy intel m/b with micro pci & micro wireless card "atheros chipset"
does anyone know if MT can recognise such wireless card?

thanks.
by xbaha
Wed Jan 14, 2009 4:24 am
Forum: Scripting
Topic: Complete DELPHI API client: update 4
Replies: 67
Views: 39271

Re: Complete DELPHI API client

i have tried this software its great, i would like to know why it doesnt handle streaming data from the router, for example: i am trying this command /tool ping 192.168.100.1 one time i get this: 14/01/2009 05.21.50 - 142 - 14/01/2009 05.21.50 - info 102 - EXECUTE= /tool ping 192.168.100.1 14/01/200...
by xbaha
Tue Jan 13, 2009 9:27 am
Forum: Scripting
Topic: Complete DELPHI API client: update 4
Replies: 67
Views: 39271

Re: Complete DELPHI API client

where did you download synapse from?
by xbaha
Tue Dec 09, 2008 2:48 am
Forum: Wireless Networking
Topic: XR7
Replies: 26
Views: 7213

Re: XR7

are we talking about XR7 or SR7???
what is SR7 ????

thanks.
by xbaha
Thu Sep 25, 2008 9:14 pm
Forum: The User Manager
Topic: Multiple Customers
Replies: 2
Views: 1005

Re: Multiple Customers

thanks.
it worked...
by xbaha
Wed Sep 24, 2008 2:55 am
Forum: The User Manager
Topic: Multiple Customers
Replies: 2
Views: 1005

Multiple Customers

How can i create multiple customers without showing the routers? i want them to manage their users withour looking at the routers list..

also, is it possible to create multiple subscribers with owner permission that uses diffrent DB ?

thanks.
by xbaha
Tue Aug 05, 2008 5:15 am
Forum: General
Topic: Hotspot routers to use centralized UserManager
Replies: 3
Views: 866

Re: Hotspot routers to use centralized UserManager

Hello, i did VPN connection between the 2 routers so that the HOTSPOT (client) have an ip address that i always know, and i added the server IP address in the radius server, i tried the following: on the server: when i add tool/userman/router the public IP of the Hotspot the hotspot can communicate ...
by xbaha
Sat Aug 02, 2008 3:20 pm
Forum: General
Topic: Hotspot routers to use centralized UserManager
Replies: 3
Views: 866

Re: Hotspot routers to use centralized UserManager

hi, thanks for the example,
i saw in that example that the Hotspot Routers PUBLIC IP was added to the UserManager Router, which make sence..
but in my case, the public interface is either a local ip address, or dynamic public ip address...
any solutions for such case??

thanks.
by xbaha
Sat Aug 02, 2008 3:28 am
Forum: General
Topic: Hotspot routers to use centralized UserManager
Replies: 3
Views: 866

Hotspot routers to use centralized UserManager

hello, i have 5 diffrent sites that i want to centralize the radius server for them, but their IP addresses are LOCAL,, i read in the wiki, that i must put the HotSpot router IP address... my centralized MT UM has public static IP to add a HS router, in the wiki: / tool user-manager router add subsc...
by xbaha
Sun Jun 22, 2008 10:35 pm
Forum: General
Topic: VLAN Explained please
Replies: 1
Views: 595

VLAN Explained please

hello, can someone give me a hint on the following configuration

Station1 wlan ip: 192.168.1.10
Station2 wlan ip: 192.168.1.11

AP wlan ip: 192.168.1.1

using VLAN i want station1 to be able to ping AP, but not station2, and station2 to be able to ping AP but not station1.

thanks for your help.
by xbaha
Sun Jun 22, 2008 10:30 pm
Forum: Wireless Networking
Topic: XR7
Replies: 26
Views: 7213

Re: XR7

XR7 is not supported i have 2 cards, the client doesnt registed with the AP, i tried all the frequencies on the chart, nothing worked. i contract MT, they told me they need to test it, and they dont have cards. i contacted Michael Ford from ubnt.com, he said he will test it and come back to me, sinc...
by xbaha
Mon Jun 02, 2008 1:36 am
Forum: Scripting
Topic: Script edit box can't handle any more charachters ??
Replies: 0
Views: 775

Script edit box can't handle any more charachters ??

hi,
i am writing a very long script, that at one point, the edit box of winbox cant take more charachters,,,
is this edit box limited to a certain number of charachters, or is a bug??

thanks in advance for any comments.
by xbaha
Thu May 15, 2008 6:57 pm
Forum: Wireless Networking
Topic: POINT TO MULTIPOINT ISSUE
Replies: 17
Views: 2171

Re: POINT TO MULTIPOINT ISSUE

i have used Nstream, pings went higher (30-50ms) but the bandwidth now is stable. i am just worried about the maximum bandwidth that i can use in my place, doesnt seem to be that much, and probably about 25mbps per band to have stable connections... my plan is to have 200mbps !! i was thinking of ma...
by xbaha
Tue May 13, 2008 12:44 am
Forum: Wireless Networking
Topic: POINT TO MULTIPOINT ISSUE
Replies: 17
Views: 2171

Re: POINT TO MULTIPOINT ISSUE

regardless of channel and band???

so if i have 100 square meter floor tower, how much possible bandwidth i can get maximum there?

thanks.
by xbaha
Tue May 13, 2008 12:00 am
Forum: Wireless Networking
Topic: POINT TO MULTIPOINT ISSUE
Replies: 17
Views: 2171

Re: POINT TO MULTIPOINT ISSUE

Thanks for the extensive explination, it really help alot. i still have few questions, When doing BT between Client A CPE and AP CPE, as i stated, Client B pings become high, and that was explain by your previous reply. i did the test again, and i notices, that also, CLIENT C & CLIENT D that are con...
by xbaha
Mon May 12, 2008 6:59 pm
Forum: Wireless Networking
Topic: POINT TO MULTIPOINT ISSUE
Replies: 17
Views: 2171

Re: POINT TO MULTIPOINT ISSUE

what do you mean by air time???
how much bandwidth can an empty channel give me ?
by xbaha
Sun May 11, 2008 4:19 pm
Forum: Wireless Networking
Topic: POINT TO MULTIPOINT ISSUE
Replies: 17
Views: 2171

Re: POINT TO MULTIPOINT ISSUE

i want to know a logical explination what makes the other link unstable, i dont want to build rules to make it stable, it should be stalbe without any rules!!
by xbaha
Sun May 11, 2008 3:53 am
Forum: Wireless Networking
Topic: POINT TO MULTIPOINT ISSUE
Replies: 17
Views: 2171

POINT TO MULTIPOINT ISSUE

hi, i have my main AP as AP Bridge, WDS Enabled, and there is 2 clients as WDS Station connected to the main AP, Say, Client A and Client B. i am using WDS to be able to bridge the trafic between ether1 and wlan. the problem is: when i do bandwidth test between Client A, and the main AP, i notice th...
by xbaha
Sun Mar 16, 2008 12:30 pm
Forum: Scripting
Topic: 3.4 scripting, any changes????
Replies: 9
Views: 1927

Re: 3.4 scripting, any changes????

i have 3 script: script1: :global sw 1 down: :set sw 1; up: :if ($sw=1) do { :set sw 0; /tool e-mail send server "2xx.165.35.xx" to "xxxx@domain.com" from "xxxx@isp.com" subject "ip address changed" body [/ip address get [/ip address find interface=pppoe-out1] address;] } that's it. script1 will run...
by xbaha
Sun Mar 16, 2008 1:55 am
Forum: Scripting
Topic: 3.4 scripting, any changes????
Replies: 9
Views: 1927

Re: 3.4 scripting, any changes????

dude, it's not only this simple script, for example, if i run the following code from terminal, it gets excuted: /tool e-mail send server "XX.165.35.XX" to "myemail@domain.com" from "ip@isp.com" subject "ip address changed" body [/ip address get [/ip address find interface=pppoe-out1] address]; and ...
by xbaha
Sat Mar 15, 2008 9:56 pm
Forum: Scripting
Topic: 3.4 scripting, any changes????
Replies: 9
Views: 1927

Re: 3.4 scripting, any changes????

what if this script is running multiple times? do i still need the statment:

:global sw

in the same script?


i am defining this script at the system startup only.
by xbaha
Sat Mar 15, 2008 7:58 pm
Forum: Scripting
Topic: 3.4 scripting, any changes????
Replies: 9
Views: 1927

Re: 3.4 scripting, any changes????

the variable sw is already defined.

[admin@FL Office] > :env pr
"sw"=0

:set sw 1 doesnt run from system->script in 3.4
by xbaha
Sat Mar 15, 2008 6:31 pm
Forum: Scripting
Topic: 3.4 scripting, any changes????
Replies: 9
Views: 1927

3.4 scripting, any changes????

hi,
i have a simple script:

:set sw 1;

when i run from terminal, then :put $sw , i get 1

now if i chnaged it from terminal to 0, then run the script from system->script, it doesnt change!, no errors, and the run counter increases...

let me know if this is a bug, or something has changed.

thanks.
by xbaha
Wed Mar 12, 2008 1:35 pm
Forum: The User Manager
Topic: Authorize.net
Replies: 4
Views: 1763

Re: Authorize.net

Any plans to integrate more payment systems for non us business (for CC payments), or atleast make the payment open source to integrate with local banks?
by xbaha
Tue Mar 11, 2008 7:26 pm
Forum: The User Manager
Topic: Authorize.net
Replies: 4
Views: 1763

Authorize.net

This is offtopic question, but
does anyone know of any authorize.net resellers who sign Non-US business a merchant account??
i have looked but did'nt find any...

please let me know.

thanks.,
by xbaha
Sun Mar 09, 2008 3:08 pm
Forum: The User Manager
Topic: invalid username or password for http://router_ip/user
Replies: 1
Views: 5704

invalid username or password for http://router_ip/user

i am trying to log the user, but i always get invalid username or password, the user is created in usermanager, and i am able to access with it, just this link http://router_ip/user wont let the user in, any idea what might be wrong? i have 3.4


thanks.
by xbaha
Fri Jan 25, 2008 11:09 pm
Forum: Wireless Networking
Topic: bridge in v3 not working like before
Replies: 3
Views: 846

bridge in v3 not working like before

Hi, i have 2 RBs, in both RBs here is what i did created bridge1, then added eth1 & wlan1 to the bridge ports, on previous versions, i was able to ping the IP of the other RB from winbos, after upgrading to version 3, i get request time out. has anything changed in version 3 in regard of bridging po...
by xbaha
Sat Dec 22, 2007 4:37 pm
Forum: Wireless Networking
Topic: how to get 54mbps
Replies: 16
Views: 3157

Re: how to get 54mbps

has anyone tested RB600 yet?
from MT website they say it can reach around 80-90mbps with its network proccessor!
please confirm anyone!

thanks.
by xbaha
Thu Dec 20, 2007 1:09 pm
Forum: General
Topic: Web Proxy & Parent Proxy
Replies: 3
Views: 1162

Re: Web Proxy & Parent Proxy

no, i think MT has to add the authentication feature in their OS !!
by xbaha
Mon Nov 26, 2007 10:59 pm
Forum: General
Topic: Load Balancing, Any problems?
Replies: 9
Views: 2677

Re: Load Balancing, Any problems?

sorry, i thought PPPoE Server, yes, my 2 routers are PPPoE clients, now the SSL problem was resolved, because i am forcing any SSL connection to go through a single line (not load balanced), so banking sites get only 1 IP, which works fine., the P2P has a problem, i still can download using bittorre...
by xbaha
Thu Nov 22, 2007 3:19 am
Forum: General
Topic: Load Balancing, Any problems?
Replies: 9
Views: 2677

Re: Load Balancing, Any problems?

no i am not using pppoe, this is only load balancing router..
by xbaha
Wed Nov 21, 2007 7:19 pm
Forum: Wireless Networking
Topic: how to get 54mbps
Replies: 16
Views: 3157

Re: how to get 54mbps

thanks for the info,
i am woundering what is the switching wireless cards?? never heared of such a thing before, what other types of wireless cards out there, and which is best to choose for higher speed?

thanks.
by xbaha
Wed Nov 21, 2007 4:08 pm
Forum: Wireless Networking
Topic: how to get 54mbps
Replies: 16
Views: 3157

how to get 54mbps

hello, i would like to know from those who have tested diffrent boards, diffrent settings, how can i get a speed of 54mbps between 2 wireless device without using nstream, questions like: 1. Is it possible with rb 333 or 500 ?? if not whats the max for full duplex TCP? 2. bridged or routed is better...
by xbaha
Wed Nov 21, 2007 3:57 pm
Forum: General
Topic: proxy question
Replies: 2
Views: 669

Re: proxy question

not really sure whats the method, but it will be as if you open your Explorer, went to proxy settings, and checked the Use Automatic Configuration Script, and had this in it http://192.168.1.1:9100/proxy.pac. now what method the explorer uses to FW traffic to that page i am not sure! but it's clear ...
by xbaha
Wed Nov 21, 2007 2:26 pm
Forum: General
Topic: Load Balancing, Any problems?
Replies: 9
Views: 2677

Re: Load Balancing, Any problems?

sure,

jsut add the following line befor the (2) odd rules:

/ip firewall mangle chain=prerouting action=mark-connection new-connection-mark=odd passthrough=yes connection-state=new in-interface=Local dst-port=443 protocol=tcp comment="HTTPS" disabled=no
by xbaha
Wed Nov 21, 2007 1:23 pm
Forum: General
Topic: proxy question
Replies: 2
Views: 669

proxy question

hi, i want MT to FW all port 80 traffic to :

http://192.168.1.1:9100/proxy.pac

this is used as automatic configuration script proxy.

how can i do that?
by xbaha
Mon Nov 19, 2007 1:39 am
Forum: General
Topic: Multiple DNS Servers
Replies: 2
Views: 1373

Multiple DNS Servers

under /ip dns, there is only primary and secondary DNS Servers, how can i add more?
by xbaha
Sun Nov 18, 2007 12:13 am
Forum: General
Topic: MT Load Balancing possible bug
Replies: 4
Views: 916

Re: MT Load Balancing possible bug

Can anyone confirm how ICMP is dealt with on MT Router?
when i mangle, i keep protocol empty, so that it mangles any type of protocol there.
by xbaha
Thu Nov 15, 2007 9:15 am
Forum: General
Topic: MT Load Balancing possible bug
Replies: 4
Views: 916

Re: MT Load Balancing possible bug

Hi there and thanks for reply, i did changed the default GW to 11.1 , i got the same result (trace through 10.1 worked, and through 11.1 did not) i did disable the default route, also i got the same results. i connected my computer to the ether @ router 11.1 and did trace, it worked fine. it's somet...
by xbaha
Wed Nov 14, 2007 12:57 am
Forum: General
Topic: MT Load Balancing possible bug
Replies: 4
Views: 916

MT Load Balancing possible bug

hi, i have done exactly as the wiki for load balancing, everything works great, i am downloading multiple sessions at 2x the speed which is great. i had a small problem which is i can do trace route to any distination from the distribution router (when i set it to go on both gateways) but on my comp...
by xbaha
Sat Nov 10, 2007 5:24 am
Forum: General
Topic: Load Balancing, Any problems?
Replies: 9
Views: 2677

Load Balancing, Any problems?

Hi, i have implemented the wiki "Per Connection Load Balancing" @ http://wiki.mikrotik.com/wiki/Load_Balancing and it works fine on my 2 adsl lines, i used 3 routers, 2 as my pppoe clients, and one router that does load balancing. so far everything is fine, only couple of problems: 1. some bank site...
by xbaha
Thu Nov 08, 2007 4:43 pm
Forum: Wireless Networking
Topic: RB 133 Max @ 20mbps
Replies: 5
Views: 1081

Re: RB 133 Max @ 20mbps

How much exactly is the 'air rate' then?

i also will try the rb500 and post results soon.

thanks.
by xbaha
Thu Nov 08, 2007 3:49 pm
Forum: Wireless Networking
Topic: RB 133 Max @ 20mbps
Replies: 5
Views: 1081

RB 133 Max @ 20mbps

Hi, i had 2 RB133 65mw standard, they are just next to each other. i made BWtest on one, i am getting MAXIMUM bandwidth @ 20mbps TCP (up 12, down 8) both registed @ 54mbps 2.4 B/G band. i tried diffrent frequency, diffrent band, 5Ghz, etc.. MAX always is 20mbps. how can i get the full 54mbps?? they ...
by xbaha
Fri Oct 26, 2007 4:36 pm
Forum: General
Topic: pppoe server simple problem
Replies: 3
Views: 583

Re: pppoe server simple problem

but still the user can access the internet if he supplied static IPs, how can i prevent that??
by xbaha
Wed Oct 24, 2007 11:14 am
Forum: General
Topic: pppoe server simple problem
Replies: 3
Views: 583

pppoe server simple problem

hi, i setup pppoe server on eth1, and i created users to login, i can dial and get authenticated without problems, i have a nat rule as follows: /ip firewall nat add chain=srcnat srcadd=10.0.0.0/24 action=masquerade this nat rule allow me to access the internet weather i dial the pppoe or not, what ...
by xbaha
Sat Oct 20, 2007 11:54 am
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 4864

Re: load balancing across multiple pppoe connections

Hi, thanks for this, i have a question, this script will run on the distribution router or the RB150 between dsl modem & the router? i am assuming this is on the distribution router, if yes, then how can the RB150 know that it's PPPoE has dropped? netwatch watches IP address, i am getting dynamic IP...
by xbaha
Fri Oct 19, 2007 2:05 pm
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 4864

Re: load balancing across multiple pppoe connections

>>2. set a script on RB150 to automatically disabled ip address of your local ethernet (which is connected to your router) whenever you couldn't ping to ISP gateway. your distribution router would not pass the traffic to an unreacheable RB150. can you help with such a script that disabled eth1 when ...
by xbaha
Thu Oct 18, 2007 5:57 pm
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 4864

Re: load balancing across multiple pppoe connections

-> It's better for you to add rb150 after your modem and before your distribution router.

What if the PPPoE link on the rb went down, how would the router know that the RB PPPoE went down and stop forwarding traffic through it???
by xbaha
Thu Oct 18, 2007 3:21 pm
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 4864

Re: load balancing across multiple pppoe connections

What if my ISP will give me the same IP for both PPPoE, would that be any help? i am just woundering, if such a routes can be added as static: ip route 0.0.0.0 0.0.0.0 pppoe1 ip route 0.0.0.0 0.0.0.0 pppoe2 both same metric, and then, any traffic will be natted on the same IP of the connection, this...
by xbaha
Thu Oct 18, 2007 11:43 am
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 4864

Re: load balancing across multiple pppoe connections

how do you create a new route to an interface?? this is great feature by the way.
but i tried to do it, the interface field cant be modified???
pls see attached shot

also, may i ask how many pppoe connections i can make?

thanks.
by xbaha
Tue Oct 16, 2007 10:03 pm
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 4864

Re: load balancing across multiple pppoe connections

yes, same gateway (and same ISP)...
i tried latest version, didnt work.

any discussions on this on other topics??
by xbaha
Tue Oct 16, 2007 11:29 am
Forum: General
Topic: load balancing across multiple pppoe connections
Replies: 18
Views: 4864

load balancing across multiple pppoe connections

hi, is it possible to load balance (or share) multiple PPPoE connections, while the ip is dynamic (assigned by the ISP) ? the ip->route doesnt assign correctly the routing table! i.e. if i have two connections pppoe1 and pppoe2 connected, the routing table looks like this: 0.0.0.0 0.0.0.0 pppoe1 (ip...
by xbaha
Fri Oct 12, 2007 6:20 am
Forum: Wireless Networking
Topic: WDS problem, need help please...
Replies: 5
Views: 777

Re: WDS problem, need help please...

enable RSTP on all APs?
by xbaha
Fri Oct 12, 2007 5:22 am
Forum: Wireless Networking
Topic: WDS problem, need help please...
Replies: 5
Views: 777

Re: WDS problem, need help please...

how can i make the 2 access points at the bottom act like AP and at the same time make them bridge (to pass the mac address for clients for authentication etc..) ?

thanks.
by xbaha
Fri Oct 12, 2007 4:20 am
Forum: Wireless Networking
Topic: WDS problem, need help please...
Replies: 5
Views: 777

WDS problem, need help please...

Hello, i have the digram in the picture, all AP bridge with WDS enabled, same channel. now what happens is, when the 3 APs are running, it seems that it's very hard to log at them, and the ping to gateway 10.0.0.1 gives a lot of request time out. when i switch any of the 2 APs off, (in the bottom of...
by xbaha
Fri Jul 20, 2007 6:53 pm
Forum: The User Manager
Topic: paypal userman
Replies: 6
Views: 1881

Re: paypal userman

I am trying to setup Paypal payment, I have don’t everything in the wiki I still have a problem, When a user want to buy credit, he gets: page cannot be displayed. I have enabled ssl, did have a merchant paypal, and got ssl certificate. Anyway, it seems the problem is when I click on Customers -> th...
by xbaha
Sat Jun 30, 2007 1:36 am
Forum: The User Manager
Topic: paypal userman
Replies: 6
Views: 1881

Re: paypal userman

hi thanks,
how can i create an unsigned certificate?
how can i go to the linux command prompt to put the commad apache2-ssl-certificate ?

thanks.
by xbaha
Sun Jun 17, 2007 6:53 pm
Forum: The User Manager
Topic: paypal userman
Replies: 6
Views: 1881

paypal userman

hi, when i logint to hotspotip/user then try to buy credit (payment-> buy credit) i get a window saying To buy credit, use secure connection! Click here after i click i get page not found.. i have 2.94.3, i did enable www-ssl on ip services and i did this: / ip hotspot walled-garden ip add dst-addre...
by xbaha
Sat Jun 16, 2007 5:58 pm
Forum: The User Manager
Topic: other billing systems (roaming)
Replies: 0
Views: 1014

other billing systems (roaming)

hello,
did anyone try to run the hotspot to FW users to another gatekeeper of another online billing system? i.e. when a user want to loging, MT will FW him to a gatekeeper of i.e. picopoint system (it support roaming) ?
by xbaha
Sat Jun 16, 2007 5:33 am
Forum: The User Manager
Topic: automatically login
Replies: 4
Views: 1443

Re: automatically login

no, just chap & http cookie
by xbaha
Fri Jun 15, 2007 5:02 pm
Forum: The User Manager
Topic: automatically login
Replies: 4
Views: 1443

automatically login

hi, when i logout, then i try to login, i dont get the prompt for username/password. this is problem, because we use shared computers, and the new user will be using the previous one user. how do i force it to give me the user name/password? i tried to clear the cache, it didnt work. thanks for any ...
by xbaha
Sun Jun 10, 2007 5:47 pm
Forum: General
Topic: Web Proxy & Parent Proxy
Replies: 3
Views: 1162

Web Proxy & Parent Proxy

hello, i am directing all traffic on port 80 to 3128 (web proxy) and working fine. i tried to setup a parent proxy to direct all the traffic to that proxy, it also worked fine. now, this parent proxy requires authentication, so, whenever i click a page, i get a reply from the parent proxy that you m...
by xbaha
Thu Jun 07, 2007 10:14 am
Forum: General
Topic: MT AS A BRIDGE DOESNT PASS DHCP REQUEST
Replies: 5
Views: 901

Re: MT AS A BRIDGE DOESNT PASS DHCP REQUEST

any other suggestion than a bug? i have the latest version anyway.
by xbaha
Wed Jun 06, 2007 10:26 pm
Forum: General
Topic: MT AS A BRIDGE DOESNT PASS DHCP REQUEST
Replies: 5
Views: 901

Re: MT AS A BRIDGE DOESNT PASS DHCP REQUEST

this:

/ip firewall add chain forward p2p all action drop
by xbaha
Tue Jun 05, 2007 8:05 pm
Forum: General
Topic: MT AS A BRIDGE DOESNT PASS DHCP REQUEST
Replies: 5
Views: 901

MT AS A BRIDGE DOESNT PASS DHCP REQUEST

hi i setup MT as AP-Bridge, setup bridge port and connected it to a DHCP server. everything works fine, when i connect to MT AP, i get an IP address from the DHCP server. now i tried to make a firewall rule to drop all p2p traffic (FW, Protocol all P2P, action DROP). it also worked fine for few days...
by xbaha
Thu May 31, 2007 4:14 pm
Forum: General
Topic: limiting p2p traffic
Replies: 1
Views: 645

limiting p2p traffic

i dont want to drop all-p2p traffic, i want to limit the bandwidth of p2p on the router to i.e 64kbps, how is that possible?

thanks.
by xbaha
Wed May 09, 2007 2:24 am
Forum: Wireless Networking
Topic: failed to confirm SSID ???
Replies: 0
Views: 487

failed to confirm SSID ???

Hello, i have an MT AP with WDS on and 4 Senao stations are set to connect manually using WDS to the MT AP. the MT AP was working fine, about 4 Senau stations were connected to it using WDS, and about 8 other registered clients. today, we tried to add more Senau stations, and something strange start...
by xbaha
Thu May 03, 2007 11:53 am
Forum: The User Manager
Topic: "download" & "upload" limits
Replies: 10
Views: 5327

i didnt know that my 1000 user uses the default profile in hotspot!
how can i assign a user to a specific profile in hotspot? if i have more than one profile?

thanks.
by xbaha
Wed May 02, 2007 6:34 pm
Forum: The User Manager
Topic: "download" & "upload" limits
Replies: 10
Views: 5327

what if i want to create 1000 users?
by xbaha
Fri Apr 13, 2007 2:05 am
Forum: The User Manager
Topic: User Manager Feature request - sticky please?
Replies: 193
Views: 54025

when batching users, could you make the username/password in a format that i want, i.e. i want them all to be only numbers of 8 chars length.


thanks.
by xbaha
Fri Apr 13, 2007 1:54 am
Forum: The User Manager
Topic: "download" & "upload" limits
Replies: 10
Views: 5327

"download" & "upload" limits

When I create a user, I get the option for the "download" & "upload" limits.
But when I want to add a batch, say 10 users, I don’t get the option to set the download & upload limits, any way to do that?

Thanks.
by xbaha
Wed Apr 11, 2007 12:02 pm
Forum: General
Topic: bridge & MAC address
Replies: 8
Views: 1905

the only MAC address seen by the billing device is the MT router MAC.

i want it , the MT, to be transparent, so that all the PCs MAC passes through it. it was working with senao, i replaced one senao with MT, but it's not briding the PCs MAC Addresses..
by xbaha
Wed Apr 11, 2007 12:22 am
Forum: General
Topic: bridge & MAC address
Replies: 8
Views: 1905

that is not correct,
my setup was:
PC -> senao indoor -> senao station -> senao AP ->billing -> internet

i can see the PC MAC address in the billing server, when i changed senao AP to MT, all people logged in the MT AP share 1 MAC address which is MT MAC address...
by xbaha
Tue Apr 10, 2007 10:33 pm
Forum: General
Topic: Sending the computer MAC
Replies: 1
Views: 578

Sending the computer MAC

hello, i have network as follows: PC1,PC2, ... -> MT router -> billing server -> internet i fixed the routing so that the the PC can get to the internet normally, now the problem is, the billing server can only see the MAC address of the MT router, so if PC1 got authenticated, PC2 can access the int...
by xbaha
Mon Apr 09, 2007 1:11 pm
Forum: Wireless Networking
Topic: Range Expanders
Replies: 0
Views: 496

Range Expanders

Hello, I have a project to conver a building using wireless solution. I am planing to use an Indoor AP RB/5HS in the building, but because i am afraid it will not cover the whole building ( 5 story buildings) i would like to use Range Expanders with WDS. id like to get a feed back on how reliable th...
by xbaha
Sat Apr 07, 2007 4:07 pm
Forum: General
Topic: bridge & MAC address
Replies: 8
Views: 1905

the station is senao, the Accdss Point is MT
you mean set the MT Access Point instead of AP-Bridge to be WDS?


thanks.
by xbaha
Sat Apr 07, 2007 2:52 pm
Forum: General
Topic: bridge & MAC address
Replies: 8
Views: 1905

bridge & MAC address

Hello, my network is like this: USER ---> ACCESS POINT ---> STATION ---> Access Point (MT RB) ---> billing device what happens is, all the users MAC addresses are logged in the Station, now i setup both interfaces on the Access Point MT RB to be as a bridge. The problem is, MT RB is passing the STAT...
by xbaha
Tue Apr 03, 2007 7:02 pm
Forum: The User Manager
Topic: Usermanager Cannot Generate Vouchers
Replies: 15
Views: 4686

where do i find Native XML option?
by xbaha
Tue Apr 03, 2007 2:39 pm
Forum: The User Manager
Topic: Usermanager Cannot Generate Vouchers
Replies: 15
Views: 4686

hi, i have downloaded latest version of Fire Fox today. I still have one problem: For example I want to delete a user, so I go: USERS->VIEW I have about 5 users in the list; I checked one of them, and then clicked on EDIT-> REMOVE I get error message saying: Check at least one user! While I am sure ...
by xbaha
Sun Apr 01, 2007 1:17 am
Forum: The User Manager
Topic: Usermanager Cannot Generate Vouchers
Replies: 15
Views: 4686

the same is happining to me, any fix to this?
not only for generate vouchers , but for anything like remove user, or remove credit, etc... is it IE problem? what browser MT was testing the UM on?

thanks.
by xbaha
Sat Mar 31, 2007 7:43 pm
Forum: The User Manager
Topic: 3.06b bug
Replies: 4
Views: 1482

i dont think it;s a big problem if they fixed it to work with IE, most users use IE now.
any idea if IE7 has the same problem?

thanks.
by xbaha
Sat Mar 31, 2007 3:22 pm
Forum: The User Manager
Topic: 3.06b bug
Replies: 4
Views: 1482

3.06b bug

hello i went to USERS->VIEW then clicked on Generate the mouse can go over Vouchers 1pp, if i moved it down the submenu disappear. the same go for Edit, if i move the mouse down the submenu disappear! i also have a question: how can i generate i.e. 10 users that has a download limit of 1GB ? i know ...
by xbaha
Fri Mar 30, 2007 6:53 pm
Forum: Wireless Networking
Topic: Definistions for an RF newbi
Replies: 7
Views: 1159

here are the readings on my station: Band: 5Ghz Frquency: 5700 Mhz Tx/Rx Rate: 6Mbps Tx/Rx Signal Strength: -61/-76 Noise Floor: -112 Signal to Noise: 36 Tx/Rx CCQ: 64/0 Overall Tx CCQ: 0 Ack Timeout: 28 the station now is not very far from the AP, i will soon install another station that is somehow...
by xbaha
Fri Mar 30, 2007 4:37 pm
Forum: Wireless Networking
Topic: Definistions for an RF newbi
Replies: 7
Views: 1159

hi, thanks
what are the normal values shown in the status tab that i can tell my link is ok?
by xbaha
Fri Mar 30, 2007 1:45 pm
Forum: Wireless Networking
Topic: Definistions for an RF newbi
Replies: 7
Views: 1159

i just want to understand these values...
by xbaha
Fri Mar 30, 2007 1:25 pm
Forum: Wireless Networking
Topic: Definistions for an RF newbi
Replies: 7
Views: 1159

Definistions for an RF newbi

Hello, i am new to RF ... id like anyone can clear things out for Tx,Rx,Noise Floor,SNR, Tx CCQ, the db for the antenna.. what are the proper values for them? how do i tune them, also if tere is a link that can explain that all. does increasing the power helps? when do i need to do that? why do the ...
by xbaha
Tue Mar 27, 2007 7:10 pm
Forum: Wireless Networking
Topic: What frequancy do i use?
Replies: 2
Views: 778

you mentioned the frequencies, but non is in the range of 5.4 to 5.7, am i missing something?
by xbaha
Mon Mar 26, 2007 10:00 pm
Forum: Wireless Networking
Topic: What frequancy do i use?
Replies: 2
Views: 778

What frequancy do i use?

hello,
i have RB/APO antenna running on 5.4-5.7 hz.
when i wanted to use any frequency withen that range from winbox, i couldnt find any, there were set of frequancies below the 5.4, and above the 5.7.. i am confused.. what frequancy should i actually use?
by xbaha
Mon Mar 26, 2007 8:13 pm
Forum: General
Topic: Maximum number of clients on a single AP
Replies: 12
Views: 2213

so you mean no matter how powerfull the router is, the interfernace causes problems? even if i looked for clear frequancy? one more question, what does the interferance has to do with number of clients, i mean, if there is interfernace, the network should not be stable even for few clients, am i rig...
by xbaha
Sun Mar 25, 2007 8:56 am
Forum: General
Topic: Maximum number of clients on a single AP
Replies: 12
Views: 2213

you mean use regular PC? what kind of board that has 1g+ ?
by xbaha
Sun Mar 25, 2007 12:25 am
Forum: General
Topic: Maximum number of clients on a single AP
Replies: 12
Views: 2213

Maximum number of clients on a single AP

Hello, i was reading many posts where most say the maximum number of clients an AP can handle is about 50.
can i ask where did this number came from? is it the MT RB memory & proccessing power, or something else? what to do to increase this number?

thanks all.
by xbaha
Fri Mar 23, 2007 2:25 pm
Forum: General
Topic: DSL Interface
Replies: 3
Views: 846

What about XPEED isnt it supported??
where can i buy it from?
that all!

thanks.
by xbaha
Thu Mar 22, 2007 7:29 pm
Forum: Wireless Networking
Topic: Routing Question
Replies: 4
Views: 913

thanks for the help, i totally forgot that i must do the routing back on the AP, ill do it and let you know, also, do i keep the natting as is?

thanks/
by xbaha
Thu Mar 22, 2007 7:05 pm
Forum: General
Topic: DSL Interface
Replies: 3
Views: 846

DSL Interface

Hello, as far as i know MT supports only XPEED SDSL interface, does it support another DSL interface? i was looking for XPEED all over, it seems that this product was discontinued while back, and no luck to find it! if some one know a source please let me know, or if MT supports something diffrent a...
by xbaha
Thu Mar 22, 2007 7:29 am
Forum: Wireless Networking
Topic: Routing Question
Replies: 4
Views: 913

Routing Question

Hi, i have an AP set as ap-bridge int eth1 ip : 192.168.1.10/24 (public) int wan1 ip: 192.168.10.1/24 (local) in my station : int wan1 ip: 192.168.10.2 (public) int eth1 ip: 10.0.0.1/24 (local) i want to connect both wireless devices, so what i did on the station: 1.add gateway to 192.168.10.1 (wan1...
by xbaha
Fri Mar 09, 2007 4:25 pm
Forum: General
Topic: Networking Question
Replies: 2
Views: 733

cloning

i am not sure if it does support cloning or not. the problem is, i have several access points for clients, and the umber of shared users is 1, but if a user has an access point of his own with also eathernet ports, i can allow up to 2 (or 4 or what ever under MAC addresses) to share the same usernam...
by xbaha
Fri Mar 09, 2007 12:38 pm
Forum: General
Topic: Networking Question
Replies: 2
Views: 733

Networking Question

Hello, I am trying to setup a HotSpot, and allowing 2 Addresses per MAC. The customers wireless modem is on Bridge mode. Now the router is not getting the MAC address of the modem, it's getting the MAC of each computer, so, i cant use the function (2 addresses per MAC) because each one is loged in h...