Thanks guys
No one in South Africa has got stock we've got four major distributors and a few smaller ones, but neither of them has got stock that's why I thought there might be a problem with stock
Hi guys
Is it just in South Africa or is anyone else struggling to get Mikrotik hardware. We hav'nt had any availlable for months now and it seems like its going to take a few more months to get stock
Hi guys
What I did was to add a new tool under the tools menu of my dude server. let's say "Winbox alt port". with the following Command:
%HOMEPATH%\Desktop\winbox.exe [Device.FirstAddress]:8891 [Device.UserName] [Device.Password]
Hi If I read an ECMP gateway in mikrotik script the separator is a semi-colon: :local defgateway :set defgateway [/ip route get [/ip route find comment=default] gateway] :log info $defgateway the output is: script info 172.17.2.1;172.17.3.1;172.17.4.1 If I want to set a new gateway :set router 172.1...
Hi
I'm having the same problem and it occurs at random times only once or twice and then nothing for hours. I downgraded to ros5.25 and it stopped. I would suspect a clash between the way ubiquity handles bridged connections and Mikrotik's way
This DFS and radar detect is killing me. It takes forever to detect radar before an access point starts running. since 6.37 It would appear there's no way to disable it so I had to downgrade everything back to 6.36. Please mikrotik help!!
Hi
On my Basebox5 The DFS on the WLAN does'nt show so I can't disable DFS And everytime I reboot it would detect radar for an eternity before it starts running in AP mode If I downgrade to 6.36.3 its allright
Hi guys
When I rightclick on any mikrotik device in dude and go to tools / winbox it would'n go fulscreen. If I maximize the window the work area stays the same and the windows goes fulscreen.
does anyone else experience this
or you could try running a script
/tool user-manager session
:foreach i in=[/tool user-manager session find nas-port-type=ethernet] do= {/tool user-manager session remove $i}
Hi Guys I've got a problem on a PTP link with two Baseboxes and parabolic dishes. Signal strength is at -59/-59. The problem is the ccq is at 99% / 3%. I replaced radios,powersuplies and all the wiring and it's still the same. This link ran perfectly for years but only recently this started. Any sug...
Ok the powersuply is a 24v battery charger with two deepcycle batteries. I have got a toggleswitch to switch supply to the router on and of so the power supply stays on and as soon as the router goes of the noise stops
Hi I'm co-locating with a guy with a two-way radio repeator and now all of a sudden he's getting a Hissing sound on his radios, but the moment I put my mikrotik of its quiet again. Is this possible at all I mean I'm on 5.8Ghz and he's on 124Khz. Could it be that the board itself coul generate noise ...
Hi I'm co-locating with a guy with a two-way radio repeator and now all of a sudden he's getting a Hissing sound on his radios, but the moment I put my mikrotik of its quiet again. Is this possible at all I mean I'm on 5.8Ghz and he's on 124Khz. Could it be that the board itself coul generate noise ...
It produces an output like this. /nuser1,432144,545422/nuser2,8926069,80082044/nuser3,520311629,3529277308/nuser4,412520988,1554555323/nuser5,33844981,127074590/nuser6,1539238757,4064530441/nuser7,73536214,232673237 I need it to be like this user1,432144,545422 user2,8926069,80082044 user3,520311629...
Hi I've got the following script to write the usage of our clients on the usermanager to a file but the output is one long string. I would like to insert a crlf after each client so that I can import it into exel. I tried /r/n but that does'nt work If anyone can give me a pointer on how to do this :...
Hi
Is there a posability that one can read the usermanager database from windows. Or to export it so that I can see it on say excel or even a text editor.
Hi I'm running an ipscan on our LAN adresses it picks up all the addresses even the ones that we are not using all with the same mac address wich is the address of one of our ADSL routers. If I disable the ether connecting to that ADSL everything is fine. Could it be that the ADSL is running proxy-a...
Hi I want to move dude that's running on a rb600 to a pc running ros3.30 on both the router and pc. Is there a way to backup the maps and everything on dude and move it to the other one
OK Thanks
I read in the post from FEWI http://forum.mikrotik.com/viewtopic.php ... xy#p177169 that the webproxy's traffic originate from the router in other words I need to mark the routing in the output chain. It actually works thanks
Hi Does the webproxy use the default gateway for its serverconnections or can I route the proxy server through another gateway. What I'm trying to do is to use a shaped ADSL connection for browsing and an unshaped one for all the other stuff. I used a mangle rule to mark the routing for all traffic ...
Hi
I'm having troubles with other wireless operators trying to Jam signals on my point 2 point link. I'm changing frequencies about twice a day. Is there a way to let a script do the job of changing the frequency as soon as signal strength drops below say -85db.
Hi
I'm having troubles with other wireless operators trying to Jam signals on my point 2 point link. I'm changing frequencies about twice a day. Is there a way to let a script do the job of changing the frequency as soon as signal strength drops below say -85db.
Hi Can anyone help me. I've got a large bridged network with 23 highsites. All highsites and clients are on the same subnet 10.1.24.0/21. By adding one highsite I can have a circle so that if one link dies it can use the other way around. Will ospf work in this scenario. Or else what can I do to mak...
Hi I'm having trouble connecting to our exchange server using https since we upgraded to ros3. We connect to the server via the internet so its not a local server. It all worked very well til we upgraded (or were forced to upgrade to a rb433 wich comes with ros3) to ros3. Also the nat rules does'nt ...
Hi
I got a RB600 in a mesh network. I changed the address of our Linux server that's acting as the DNS, Radius and Gateway and I made the adjustments on all our highsites including the RB600 and every time the rb600 reboots it restores the old settings. Is there something I'm doing wrong
Hi I have a problem after installing a new router 433 AH the nat rules does'nt work. I used to have a router 532 with Ros 2.9.51 and everything worked well. What I'm doing is to nat all the port 25 traffic on our network to our local mailserver. chain=dstnat dst-port=25 protocol=tcp action=dst-nat t...
Hi there I want to know if there is a way to write variables to files so that I can download it via FTP. What I want to do is to monitor traffic for individual customers ie the amount of data used by the customers. The Automated billing script does the job but it means i get a thousand e-mails to pr...
Like I said all Mikrotik, The clients' mikrotik connect to the AP they are all in station mode. If I for some reason have to change the frequency on the AP they don't automaticly retune to the new frequency. I have to manually set their frequencies.
Hi
I have a wireless network where clients connect to an accesspoint All Mikrotik. Everytime I have to change the frequency on the AP i need to log into every client router to change the frequency. Any sugestions.
Yes
I'm using Routeros 3.6 and the resolution is 1024x768 if i adjust it to 1280x1024 I can see everything but then I have to use the magnifying glass .
Hi
I want to know if there's a way of passing parameters to a MT script. For instance I want to change the rate-limits for centain user groups can I write one script and get the limits from parameters passed to the script or must I do a script for each rate limit and group
Hi
I'm having problems with the winbox utility in that if I run routeros on an intel or amd pc and you click on system and the submenu appear you can't see the bottom menu items like I can only see to ntp client. If I try tools the same thing happens. Have you guys perhaps have a solution
Hi I ran Routeros on an amd PC with usermanager. I have two ADSL routers connecting to the internet. When I try to set the gateway to 0.0.0.0/0 to these two routers the os set the second one's ip to be the same as the first one as soon as I apply the setting. I downgraded to 2.9.41 and everything is...