Hi,

We use this; and work fine

[array_size(oid_column("iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrWireless.mtxrWlRtabTable.mtxrWlRtabEntry.mtxrWlRtabStrength"))] Wireless Clients

Regards,

Fran.

You need check any line user before select remove user.

Regards,
Fran.

Use a profile for this user, with a fixed IP, and do a filter queue with 0Kb outside 12:00h-14:00h.

Regards,
Fran.

Hi,

You have active MAC autentication in your hotspot profile?

Regards,
Fran.

Hi, We have this problem in the past, with Lobometrics Miura Basic and Plus. When we have 10-12 clients at one AP, ack up to 408, but when we have only 3-5 ack it's ok (after reboot, sure). About 6 month ago, change my clients to RB112@R52, all MT and Routerboard, and I have AP with more than 35 cli...

Hi, I use this, for apex and emule, you can use the same, but change ports, Local IP and Public Interface. ============================================================== 0 chain=srcnat action=masquerade 1 ;;; Apex TCP chain=dstnat in-interface=pppoe-out1 protocol=tcp dst-port=3599 action=dst-nat to-...

Hi,

what is exactly your problem? only get better configuration?

Fran.

Hi,

Yes, you are ok, but if you use a less power your client need connect more near of antenna, and in this case you will have lees problems.

Regards,
Fran.

Hi,

Well if you use a Big Gain sector, is possible that have a low Vertical Beam Width, if you use a Omni or antenna with less Gain, you have better Vertical Beam Width, but will need more points to connect your clients. Low Gain = less directional.

Regards,
Fran.

Highest transmitted frequency : 5810.000 MHz (5.810 GHz) Wavelength : 2.031 inches (5.160 centimeters) Transmitter RF power output : 26.000 dBm (398.107 milliwatts) Transmit cable type : Times Microwave LMR-600 Transmit cable length : 1.640 feet (0.500 meters) Total transmit cable loss : 0.119 dB (...

Hi,

Well, Mikrotik have "alignment" Mode. I use this and too much patience. We have links with 20Km and 32dbi Disc with 32Mbps througput.

Regards,
Fran.

Hi,

- You are using "PPPoE", "Usermanager", etc?
- What version?
- On RouterBoard (model) or PC?

Regards,
Fran.

Hello,

I have running 2.9.43 and I don't have this problem. The mistake are posible for the update at v.3 from 2.9.43.

Regards,
Fran.

Hi,

I have 1 RB44 in my CORE ROS and the four have the same irq (#9)

This is a problem. How can I change the irq for ether ports in the same nic RB44?

Regards,
Fran.

Hi,

You need masquerade network in ether2, I think.

Regards,
Fran.

Your S.O. (Windows or Linux) Firewall ? It's open to?

Have masquerade or nat network?

Fran.

Hi,

Please go to this URL:

http://www.mikrotik.com/testdocs/ros/2. ... p#6.36.3.2

Bye.
Fran.

You can use too "masquerade".

Regards,
Fran.

If you move quickly over menu, you can do clic in I.E.

Bye.
Fran.

Thank you very match.

no answers? mikrotik????

Hi,

I think not. I do a test and not possible diferent value that "d" (days)

Bye.

Hi,

"dst-address=203.x.x.x/32" are you sure????

I think that this is your problem, try with dst-address=203.x.x.x/24

Goodbye.

Hi,

jejeje, "Chao" is the same in Spanish at "Ciao" "Goodbay" etc, ins't my name, my name is FRAN.

Well, I'm configured SMS alerts and works fine in my system.

Chao,

Fran.

Do this rule in your web-proxy:
===================================
/ip web-proxy access add dst-port=80 url="http://www.google.com" action=deny
===================================
Work fine, almost in my machine.

Chao.

Hi,

If not, ask again and I answer you.

Chao.

Hi,

If you are using web-proxy, block myspace.com in web-proxy list. More simply.

Chao.

Hi,

Set "Probe Interval = 20 mtos" and count = 0

Do, test, and write here.

Chao.

I need translate User Manager to Spain for my clients. If you say me how do, I will do spanish translation and up to wiki or forum.

Thanks.