Community discussions

MikroTik App

Search found 6 matches

by icedogm
Mon Mar 22, 2021 11:54 am
Forum: RouterOS beta
Topic: v7.1beta5 [development] is released!
Replies: 292
Views: 85447

Re: v7.1beta5 [development] is released!

lte interface says that there is newer firmware available but the latest already installed /interface lte # A newer version of modem firmware is available! set [ find ] allow-roaming=no name=lte1 network-mode=lte /interface lte apn set [ find default=yes ] ip-type=ipv4 [admin@tiskre] /interface/lte>...
by icedogm
Thu Oct 24, 2019 2:21 pm
Forum: RouterOS beta
Topic: bootloop in VRRP on CCR1036-8G-2S+
Replies: 0
Views: 2674

bootloop in VRRP on CCR1036-8G-2S+

Hello, Followed wiki example in setting VRRP and just after adding IP address to VRRP interface both routers went to bootloop. Had to disconnect VRRP member interfaces, removed any vrrp related conf and routers back online. routerboard: yes model: CCR1036-8G-2S+ firmware-type: tilegx factory-firmwar...
by icedogm
Mon Sep 16, 2019 2:29 pm
Forum: RouterOS beta
Topic: 3011UiAS aes hardware acceleration [SOLVED]
Replies: 1
Views: 11842

3011UiAS aes hardware acceleration [SOLVED]

Hello,
IKEv2 setup (identical to wiki rw with rsa, but eap-radius), /ip/ipsec/installed-sa> print doesn't show hw-aead being enabled. On the latest 6.x series hw-aead was enabled.
by icedogm
Wed Apr 10, 2019 10:43 am
Forum: General
Topic: CRS317 fault led ON running ROS
Replies: 3
Views: 2330

Re: CRS317 fault led ON running ROS

quick answer to myself
/system leds set 32 disabled=yes
by icedogm
Tue Apr 09, 2019 5:00 pm
Forum: General
Topic: CRS317 fault led ON running ROS
Replies: 3
Views: 2330

CRS317 fault led ON running ROS

Hello, have a couple of CRS317 running latest betas and on one of them fault LED is constantly on. On the device with fault led OFF the output of system health print is: [admin@MikroTik] > system health print cpu-temperature: 36C psu1-state: ok psu2-state: ok fan1-speed: 0RPM fan2-speed: 0RPM on the...
by icedogm
Tue Mar 06, 2018 5:13 pm
Forum: General
Topic: IKEv2 does not use ESP?
Replies: 1
Views: 2184

IKEv2 does not use ESP?

Hello, Set up simple IKEv2 road-warrior server as per wiki article, allowed udp:500,4500 and ipsec-esp protocols in input chain, deny everything else. Discovered that ipsec-esp rule packet counter stays 0 all the time. Deleted the rule allowing only UDP:500,4500 and everything seems to be working fi...