MikroTik

nordex

I've never sad this, but God, please send to hell directly the person who wrote such small and unreadable default password.
Thanks.

hap ax2. no other stickers with password btw.

nordex

remove discovery interface and then it will connect by IP.
don't ask me why it's like that, but it works.

I, also, would like to know why is it working then.

/inter wire cap
set discovery-inter=""

nordex

maybe I'm missing out something, but you can provide power to powerbox via Ether1 by 802.3a power supply or by injector.

nordex

Hi,
can you please recommend mikrotik outdoor AP, instead of SXTsq 5 ?

Thanks

nordex

Since SXTsq 5 High Power is discontinued

what is solution for outdoor AP (not client), and not sector angle, but smaller like 25 degrees ?

nordex

I think that, for some reson, your mikrotik device did not negotiate gbit link to raspberry, but instead it locked to 100 mbit before parameter change.

nordex

The answer was already provided. Large gathering WIFI is the forte of some vendors............. and others not.
Dont create a ruckus but do look around.

+1

nordex

hahahah...you made my day....so true....

Nothing wrong with learning capsman but do you really want to piss off family members Wait until MT has wifi6 products!!

nordex

interference in wireless between ap-3 ->ap4 and ap-5->6,7,8
for example,
set 5180 on ap-3->ap-4
and 5700 on ap-5->6,7,8

also, move away ap-4 from ap-5, make sure they are not nearby each other.

nordex

I seriously cannot believe how garbage it is. But this is not just a rant its a plea to please do something about it. You've lagged so incredibly far behind the industry that its actually insulting that you still sell wireless products (outside of your 60ghz which is quite frankly awesome if used a...

nordex

Did you send this to support?

If this is a global problem, we should keep this topic on top of the forum.

DO NOT UPDATE TO 6.49 UNTIL MIKROTIK GIVES OFFICIAL RESPONSE

nordex

" at a company's remote site", or sites ?

I have same situation, with multiple sites, 1-2 pc per site.

What I did is l2tp client on windows, all clients connect to my vpn and then connecting through internal network to them.

nordex

it does not matter in which order you will connect them.

nordex

could it be bridge loop protection ?
either from cisco or mikrotik side.
can you put switch between them so you can debug from which side port flap occurs ?

nordex

DO NOT upgrade it on 2011.
Bricked one from 43 to 43.2., me too.
Remote destination...tommorow will be looong day.

nordex

So why you have not upgraded first to 6.40.7 (bugfix) with old bridge implementation?
Why are you upgraded working hotel infrastructure to RC version? RC is test version so upgrade could fail.

It was a sunny and beautiful day. Murphey was out of the town.

nordex

BartoszP, this site(hotel) has 200 ap-s dislocated on premises. I have done previous upgrades from 5.x to 6.x without problems. This particular release has bug in upgrade procedure. Routerboard stuck in reboot loop. It does not have any relation with changelog. Netinstall to version 6.42 works fine....

nordex

Hi, thanks for your simphaty. I've tested it on device that had 6.0 prior to this and I saw it fixed wifi problem. I was so happy. Then I upgraded others(batch upgrade), and this problem happened. I understand this is RC, and I wanted to warn others not to do same mistake, as well as mikrotik to fix...

nordex

BEWARE !
Updating from 5.xx (5.27 I think) to this version will result in inaccessible device ! It will enter reboot loop.
I've done it on 15 pcs of rb751 and rb951-2n.
Netinstall will fix if you mess up.

Mikrotik please update your upgrade procedures

nordex

Ok, CCQ is better.
What about speed difference? Noticeable or not?

nordex

It is probably your OS firewall that is preventing share services to be used from non local subnet.
For the test, disable your OS firewall and check again.

nordex

Got my WAP LTE kit today. both has loose heatsink. Luckily I inspected mine before powering it up. the heatsink is rubbing against solder, parts and antenna. pretty sure it will cause overheating or short. We haven't seen similar reports, can you please send us the serial numbers of these units to ...

nordex

https://forum.mikrotik.com/viewtopic.php?f=7&t=102908 Most of mikrotik wifi devices (90%) suffer the same problem and Mikrotik lies about it and does nothing to fix it. Access points are not able to utilize full wifi speed on 2.4ghz with most of mobile phones (except high-end models). Phones ge...

nordex

Heh, wait until you find out that you are unable to surf on that device with full WiFi speed
on 2.4 ghz

nordex

I vote that we make new forum topic with alert to all new buyers informing them that mikrotik does not work correctly in 2.4ghz spectrum.
And with regular bumping we should keep it on top of forum.

nordex

Any reason to go for this over the WAP-LTE Kit ? maybe for three common reasons: 1. device overheating problem (passive cooler falls off) 2. sometimes missing lte interface 3. need for constant reboot to reconnect (automatically with scripts) the device is premature, I believe that this shortage of...

nordex

Mikrotik is everywhere.
Should ISIS start complaining about bad WIFI so Mikrotik finally hears its customers ?
Skip to 00:30
https://www.liveleak.com/view?i=5ba_1517669921

nordex

The issue is mostly on 2.4ghz and 54mbit max rate and it is software bug (installing openwrt or LEDE, and it works full speed)
Normis, please respond to what users ask from Mikrotik.

This is a HIGH-level issue.
When will this be fixed?

nordex

@honzam - tnx, but then I loose wireless controller, and openwisp controller looks bit complicated @jarda - I really did not think of you, old forum veteran, to give this kind of answer. It's not about notebook issue, read my post again. Only connection from mobile phones are affected. Please don't ...

nordex

Sorry, I must have overreacted because of frustration. Here are some facts: I follow and use Mikrotik since version 2.9.27. That is long. It's not about 200 devices and interference. Take only one mikrotik wifi AP 2.4ghz in absolutely clean wireless area. Take 10 different mobile phones. Do a speed ...

nordex

Ok, let me put it this way. Take one RB, connect it to 2.4ghz, clean surrounding. Try speedtest with 5-6 different mobile phones. Do you get more then 22mbit on all of them ? I bet some of them will have tx rate 54 mbit max on wireless registration tab. THAT is the issue. Mikrotik does not work well...

nordex

Hello, I'm seeing speed issues in wireless, 2.4ghz, download direction. Upload works better then download . Download gets 20 mbit, upload goes full. Issue is with mobile phones(most of them, only high end are ok, but its only 25% of them). Laptops seems to work fine. Yes, I've read forum about this....

nordex

Hi, Yes I did notice somewhat more heat then usual. Passive cooler was so warm that glue melted from chipset and cooler fell off. Sim Location and insertion and removal process is painfull. Mikrotik staff, you should have team of product Beta testers which will return objective Feedback info to you ...

nordex

sent for RMA, accepted, supplier sent new one

nordex

4-5 km urban area

nordex

what RF elements antenna model would you recommend for ptp ?
except this one which is yet to come.

and which mikrotik board.

nordex

So QRT is better in noise area. ok.
Have you tried to test qrt/dyna vs netmetal+other anntena in same conditions ?
Does rf elements antenna show noticeable performance upgrade vs qrt/dyna.

nordex

Hello, can someone please write differences between QRT 5ac and DynaDish 5ac. What are practical differences between them (ignoring license, mounting and size). What are practical advantages/diferences of one over other one. Why is qrt more expensive ? Does it have better antenna for PtMP ? back sid...

nordex

I keep getting this loop detection message on EOIP when OSPF annoucments goes through.
I've disabled loop protection but with no success.

Anyone else getting this ?

nordex

Hello, I would like to report missing interface on WAP LTE. It was working for 10 days, but with often disconnections. I've set up script to monitor interface status and reboot if it was offline. Now, there is no LTE interface at all. I have tried to install latest rc version and lte package as well...

nordex

ok, 50% is 3hrs.

1.5hr is 25% of 9ah battery capacity

nordex

Hi, mUPS sounds interesting. Is it possible to power possibly a PowerBox at which probably 4 wireless systems are connected wit PoE? So is it possible to power 5 routerboards at the same time with one mUPS? Or is the current output limited anyway? 2A current (at 24V) should be ok for this constella...

nordex

1. have you wide knowledge on wireless ? 2. have you been using mikrotik before ? 3. do you have time to buy smaller amount of equipment and test before ? 4. 1200 clients is A LOT ! Things will go smooth with 30-40 clients, but 1200 is a freaking lot. 5. reduce output power on AP in order to force r...

nordex

when you disable/enable interface it will run channel select procedure.

nordex

If someone has stolen your sxt but it's still connected, And other AP is in bridge (not AP bridge) mode then you will see the network but will not be able to connect. Change your encryption keys.

nordex

This should be reported sa bug. Please send it to support@mikrotik.com

nordex

normis,
switch to manufacturer driver when scanning spectrum, and then switch back

nordex

Add temperature/voltage graph.
I know it is possible to add it on dude/snmp monitoring, but sometimes it's complicated, and it should not be big problem for you to add it to the existing graphing routines.
Thanks

nordex

ok.
Then maybe info like

max charging current
max output current
12/24V ?

nordex

don't use it,
known hardware bugs,
EOL
use 951 instead

nordex

I see that you are using 3 chains.
What antenna exactly do you use ?

nordex

Maybe, just maybe:
What is your wireless configuration?
What type od bridge is it?

Maybe your mac address got changed(cloned) when drone roamed to another AP And that confused arduino or PC?
Can you try to delete Arp table while you are on a second AP.

Maybe spanning tree ?

nordex

Does three polarity antenna even exists for point-to-point links ?

nordex

Hello, can someone explain practical difference between 2 and 3 chain versions of NetMetal 5 for point-to-point links ? For what antenna is that ? And second question is, what is practical usage of additional mini pci slot inside 922 model. Does it create interference inside netmetal when another wi...

nordex

For future reference, it would be nice of you to write down here settings that you have tweaked so other members could find it in the future.
Thanks

nordex

nordex

+1

Mikrotik, do you like to see us suffer ?

nordex

++ for igmp snooping

nordex

nordex

EDIT: SORRY ABOUT WRONG FORUM SECTION Hi, In scenario from picture, is it possible to resolve issue where multicast is spread to all ports? Technical info: Multicast servers based on Ubuntu and dvblast (udp multicast) Set top boxes are from Amino, Aminet110. Streams are 232.232.1.1 - 232.232.1.100 T...

nordex

Hi, I would like to prevent bruteforce attacks on mail server which is behind mikrotik router/firewall. I used FTP bruteforce example http://wiki.mikrotik.com/wiki/Bruteforce_login_prevention_(FTP and I changed chains, ports, content (-ERR [AUTH] Invalid login ). My question is regarding dst-limit. ...

nordex

where did you bought filter ?

nordex

hello,

we need this too.

Is there any progress or workaround for this ?

nordex

Ok, today again I got connection refused from winbox, but
when I disabled/enabled it through telnet, it's ok again.

workaround is ok, but still this should be fixed. (or I'm the only one with this error ? )

nordex

and what if in Telnet you type
Code: Select all
/ip services
disable winbox
enable winbox
?..

thanks for the tip.
I'll post the result next time it refuses the connection.

nordex

After some time I can't login using winbox, it says connection refused.
Telnet is ok.
After reboot, everything is ok.

why?

nordex

Which one is most stable version for 802.11n and which one is for old pure clean nstreme ?

on the field, not in lab.

nordex

again:

Unfortunately there is no available room for the selected day(s).
We also have some other options, please call us or send an e-mail.

nordex

great.
can you post your configuration here.
thanks

nordex

SXT supports Flashfig out of the box, so you can do one-click configuration out of the box.
http://wiki.mikrotik.com/wiki/Flashfig

nice, but we are still missing default recommended values.
You should be politician

nordex

same here

nordex

Heat maybe ?

nordex

So, I see that others still have this 'signal jumping' issue.
I've tried with the latest RouterOS version but the problem is still active.

Is there any solution for R52hn card problem ?

nordex

I've had same problem.
Resolution was to change faulty memory slot.

nordex

you just need to enter mac field and select 'bypass' on the bottom.

nordex

Just don't touch it.
It'll work.

nordex

what is value of MT board cpu usage ?

nordex

SOLVED I was tired when I was reading Tom's reply so I set a rule on a firewall filter instead on a bridge filter. dumb me. everything works fine now. Tom, since you have similar hotspot configuration, would you please contact me on boris@dubrovnik-hotspot.com for some consultations. For certain fee...

nordex

Tom, tnx for the reply. Yes, this is the same issue I was writing few months ago. I've followed your instructions : -created few vlans (cisco catalyst 2950) -created trunk port -created vlan interfaces under one physical interface -put vlans into same bridge (but without physical inter. himself) -gi...

nordex

Hi, I need all vlans on one interface (connected to trunk) so I can read vlan tag from radius.

I'm building hotspot, this way I will know from which room customer is logging in.

nordex

Hello, I'm running simple VLAN config for test purposes. 2.9.43 on pc. VLAN and Trunk generally works ok. On Cisco 2950 I have 2 vlans and trunk. On Mikrotik I have one ethernet interface and 2 VLAN interfaces defined on it. If every vlan interface has it's own ip address, things are ok. BUT. If I p...

nordex

'X' means it is disabled.

select it and then click enable and then restart system.

nordex

Hotel IT dept. will provide us with user data.

Can radius variable "NAS-Port-Id" be fetch in login.html, or only in radius server ?

nordex

Hi, it's not problem to retrieve guest data from hotel billing system.
I need to know if I can get vlan tag in login.html through some variable ?
using radius for auth.

nordex

Ok.

is it possible to retrieve Vlan tag through login.html page - using radius <attribut> variable ?

nordex

Ppls, hello. I've been using mikrotik for a year now, and I'm quite familiar with mikrotik and network functionality. But, this time I don't have solution how to solve this task. I need to set up a hotspot service in a hotel where guest will connect from their rooms (wired) but without entering thei...

nordex

Hi, there is possibility that cards are interefering.
I've seen it on PC's with tplink cards.
Do you make lab tests or it is outdoor ? If it's indoor, try to lower tx power.

nordex

ok, then back to first solution.
I will set up my own mail server on fixed IP address, and retrieve data from routerboard through email.

Can someone suggest me gps card and gprs card ?

Tnx.

nordex

ok, tnx. Second solution is more reliable as emails have tension to have delay. I need to send data every 10 seconds. Can I ssh, or send data some other way, FROM the router as I can't know router address( which is dynamicly given by mobile service provider) I know that Mikrotik perhaps wasn't built...

nordex

Hello,

I was wondering, is it possible to constantly send data from GPS card (like one minipci from commel) through GPRS card ?
That way, it would be easy to install RB in a vehicle and have
it's location monitored...

nordex

yes, problem is in 100% cpu utilization.

Data is only passing through routerboard. Signal is -60, I set Tx power on '0'.

nordex

same thing here...12-13 mbit top. udp test. and beside that, internal tcp throughput between two bridged lan ports is 50 mbit/sec max....? with firewall off, no nat, clean install. 2.9.38. I need to connect 30 of rb133 in chain using ether ports..so I wonder, will last one of them in chain be able t...

nordex

that's it !
tnx

for others who would like to change default distance for dynamic routes :

Routes> filter

add chain=dynamic-in invert-match=no action=passthrough set-distance=20 comment="" disabled=no

nordex

Yes, I want to use pppoe connection as second gateway.
But, how to manually add it to route list when it gets dynamic ip every time ?

p.s. pppoe is on its separated ethernet card.

nordex

Hello,

on my MT Internet gateway I would like to use pppoe connection to ISP as backup line, but pppoe should be allways connected.

Well, how to change that pppoe connection does not have 'distance' 1 ?

I have dynamic ip from isp on pppoe and static on leased line (primary link)

nordex

If user wishes to remove IP address from interface on which is he currently connected , let Winbox asks him :

You are currently connected through that interface.
Do you really wish to remove/change that address ?

nordex

We're working on exactly this kind of setup right now in a couple of hotels. Leave your e-mail here and I will send you more info.

Hi there, my address is support @ dubrovnik-hotspot.com

tnx !

nordex

looks like their web site is still under development.
but tnx anyway, I'll check them again.

nordex

I'm trying to implement hotspot service in a hotel where Fidelio is used for guests managments, billing etc. There are ready solutions for HotSpots with Fidelio interfaces but I would like to implement MikroTik as it gives me much more control over network. Question is, does anyone know what is the ...

nordex

tnx for the tips.

nordex

tnx for detail reply. I need to identify them through mac addresses (or NAS-Port-Id ) because I need to know from what room they are connecting so I can make bill on hotel Fidelio system. -From login page they will be transfered to custom page (walled garden) where they will push link 'Create accoun...

nordex

Switch ports don't have mac addresses. If a switch has a mac, it's just for remote management. switch port can have different mac addresses, when creating vlans, on some switches you can specify it's mac address. Can you tell me some non expensive switch that can do that, I'll need at least 4 * 48 ...

nordex

I'm creating Internet solution for a hotel. Now, they have working solution where each guest in a room is identified through MAC address of port of switch for that floor. I'll write script to create user names and passwords through telnet on mikrotik, but I need to identify in which room is guest, f...

Search found 103 matches