Hi,

I ran into the same problem, did you solve it?

regards

I would love to see Winbox support more than just CHAP protocol when authenticating winbox logins to Radius. I would really like to see it support MS-CHAP or PAP specifically. We use encrypted LDAP backend and it only supports PAP or ntlm_auth challenge tokens, which excludes CHAP. Makes it very an...

They just get ~8 Mbps with 64 bytes framesize.

The rbs bridge the traffic. Connection tracking is turned off and no other special services are on.

Hi forum, one of our customers needs a 20Mbps full-duplex point to point link, in this case nstreme2 (Dual Nstreme) is the way to go. Therefore we use two 433AH rbs with four AR5006X 802.11abg cards and four antennas. Antenna Type: Airwin 19 dB (5100 - 5900 MHz) Horizontal The link is very good: Rx ...

queue tree also doesn't work for me. here's what I tried: [admin@prioritytest] > ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting action=mark-connection new-connection-mark=office_con passthrough=yes src-address-list=officelan 1 chain=prerouting action=mark-p...

I tried it with simple queues: [admin@prioritytest] > queue simple print Flags: X - disabled, I - invalid, D - dynamic 0 name="office" target-addresses=10.108.1.1/32,10.108.1.2/32,10.108.1.3/32,10.108.1.4/32 dst-address=0.0.0.0/0 interface=all parent=none direction=both priority=1 queue=et...

Hi folks, one of our customer needs a router which is capable of traffic prioritization, therefore I would like to use a RB450. ether1 is WAN/Internet Interface and ether2 is LAN (connected to a switch). LAN-IP: 10.108.1.200/24 ip firewall nat print Flags: X - disabled, I - invalid, D - dynamic 0 ch...

We are trying to allow users to get free internet access, but we need to collect some small info from them before they click the Trial link. UserManager won't work because there is no way to allow a free credit I guess. we would like to do exactly the same, do you have found a solution for that pro...

Hi,

Is it possible to test the mtu-size without fragmenting the packets?
In Linux it looks like this: I made a custom probetype with 1500 bytes packet size, but I think that these packets are fragmented.

thx,
chris

I'd also like to know how that is treated.

Hi, I have two wan-internet uplinks from different isp's, what I'm trying to do is a combination of failover and per traffic load balancing. common services like http, ftp, skype, mail, etc. should be routet over the first line and e.g. p2p over the second one, if one line fails everything should fl...

@jcremin, I already tested this way and the wired side could definitly be excluded. Downgrade to ros 2.9.48 was successfull now I have full speed the set up is now like this: rb133(bridge) ------------------rb333(stations-wds) ros2.9.48 ros3.0rc8 btw. only these packages are used on both sides: adva...

I use cesarftp-server (small windows ftp-server) and flashfxp as ftp client, both are running on laptops directly connected to the routerboards. I got some weird results testing against a ftp server far away therefore I tested it on a wired connection firstly and had full speed so this has nothing t...

Thanks for your answer. Try changing the ap to be the 333 board. See if it changes anything. I'll try that later. Also do reset the configuration on both ends, and make it again. I did that yesterday but without any effect. Here are my btest results: 133 to 333 (I tested vice versa too with same res...

Hi, I set up a transparently bridged point-to-point link with a RB133 on one side and a RB333 on the other side. The Problem is that I got only a max. of 8KB/s ftp throughput (I tested with a laptop and ftp server/client on each side). here are the config's of the two routerboards: RB133C (v3.0rc8) ...

I tried to use layer 7 firewall, i use those regexp to match bittorrent: ^(\x13bittorrent protocol|azver\x01$|get /scrape\?info_hash=)|d1:ad2:id20:|\x08'7P\)[RP] then i mangel and queue it: 1 chain=prerouting action=mark-packet new-packet-mark=bittorrent passthrough=yes layer7-protocol=bittorrent th...

ok, I hope I understand you right, the rule was changed to: > ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 chain=forward action=drop protocol=tcp connection-limit=16,32 now each user can only establish 15 simultaneous tcp-connections is that right? would it be useful to p...

Hi, on one of our towers nearly everybody uses p2p-programs. There are five ap-bridges with about 30 logged in users each. I set up RouterOS v3.0rc6 on a x86 system with two nic's as a transparent bridge, this looks like this: router-----x86ros-bridge-----accesspoints. I tried to limit each users p2...

I did that before I have posted in forum

Today I got an answer from Maris

Hello,

I was unable to reproduce issue you have.
Try to reinstall RouterOS with netinstall and see if it helps.

Regards,
Maris

I'll try that an report later

but my script works with v3.0rc2, it also worked with v3.0beta6 but with beta9 it doesn't work --> here's what maris wrote back: Hello, Yes, this is a known bug, because of new variable system. It is already fixed in 3.0 beta10. Regards, Maris beta9 had this fix in changelog: *) fixed bug - bridging...

hi, I use a rb500 (fw 2.6) as 2.4 GHz ap bridge with v3.0rc2 with following packages installed: 0 system 1 routing 2 ntp 3 advanced-tools 4 calea 5 wireless 6 routerboard 7 security Everything works fine but after some days it hangs up without any reason. This message is shown if you want to login: ...

Hi, I get an rb133-client for testing purposes. It should work as an wirless bridge, but no packets are bridged. Wlan is connected to the ap (station-mode, 5GHz), the bridge on rb133 ist set but it doesn't work, then I did some research and found that in the manual: The IEEE 802.11 standard limitati...

I've changed the rule to
but it doesn't work too, then I did a system-reboot, after that the rule drops connections like it should.

Hi, I experienced a problem with firewall-filter rules and ros-v3beta9. when this rule is added nothing happens: /ip firewall filter add chain=forward protocol=tcp p2p=all-p2p tcp-flags=syn connection-limit=11,32 action=drop this rule should drop all p2p-connections >10 but byte and packet counter i...

I got it!

here's the solution:
/interface bridge settings set use-ip-firewall=yes

simple as that

now the queues are working in bridge mode

Hi Smith,

the problem is that all wlan-accesspoints in our environment are configured as bridge, routing is done by cisco-routers.

Bridge is not the only way to make it work. Try routing, shaping will work, trust me...

does that mean that queues only work in routing-mode?

hi all, I'm using a rb500 with mt router-os v3.0beta7. It is configured as wlan-accesspoint. therefore eth1&wlan1 are configured as bridge. the upstream is connected to eth1. my problem is to shape the upload-speed of the clients which are logged in on interface wlan1 I tried http://wiki.mikroti...

hi, I'm using mt-rb500 with Firmware v3.0beta6, it's configured as ap-bridge. AAA is done against RADIUS. I've freeradius with mysql-backend in use. MAC-authentication and MAC-accounting works fine, but I've some problems with shaping. how can I limit the rx-tx-rates of the wlan-clients (without usi...

after reboot i get: system warning file /nova/bin/bridge collides with system package system warning file /lib/modules/2.6.19/kernel/net/bridge/bridge.ko collides with system package system error installation of stp-bridge-legac-3.0beta6 failed: could not create /var/pdb/stp-bridge-legacy/crc: No su...

yeah I read that in another thread too.
If I connect via ftp to the MT, the root dir contains the directory "hotspot" - nothing else should I upload the whole *.npk files in the root directory and reboot?

btw thx for your fast reply

hi, I have v2.9.38 running on my RB500. For testing purpose I want to try v3.0beta6, therefore I downloaded v3.0beta6-netinstall. I followed this guide http://www.mikrotik.com/testdocs/ros/2.9/guide/netinstall.php but the Mikrotik Router Intaller v3.0beta6 doesn't show up the MT, there's only hardis...