Community discussions

MikroTik App

Search found 4 matches

by eng_neovia
Tue Mar 27, 2007 5:01 pm
Forum: General
Topic: Same Vlan on two interfaces, Tag and Untag
Replies: 2
Views: 1100

TAG/UNTAG

Hello, On RB532A, for example: Interfaces Eth2 and Eth3 must be untagged for vlans 100 and 101 respectively cause there's no 802.1q support after. Interface Eth2 would be connected to a client's switch or hub with no vlan support, and Eth3 would be connected to the outside NAT interface of a Linux S...
by eng_neovia
Tue Mar 27, 2007 4:31 pm
Forum: General
Topic: Same Vlan on two interfaces, Tag and Untag
Replies: 2
Views: 1100

Same Vlan on two interfaces, Tag and Untag

Good Morning, I'm new to Mikrotik RouterOS and in need of help. We are planning on use routerboard 532 with Mikrotik as our default CPE for our clients. It's works very well as a router, NAT, Firewall, filter and bandwitdth controller, but some of our clients need only switching vlans for MPLS tunne...
by eng_neovia
Tue Mar 27, 2007 3:22 pm
Forum: General
Topic: Mikrotik and Switch (VLAN Trunk)
Replies: 4
Views: 1806

Catalyst command

Hello, You could try something like this: conf t interface f0/17 switchport switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 160,168,178 no shut These vlans have to be crated at switch's vlan database. In this case you don't need native vlan, cause both equipm...
by eng_neovia
Tue Mar 27, 2007 3:09 pm
Forum: General
Topic: Bridging VLANs?
Replies: 7
Views: 1661

It will work as I have done similar things. Although the general consensus around here is that bridging vlans should be avoided if at all possible. Hello, I'm new to Mikrotik RouterOS and curious about why bridging must be avoided at all, cause we're planning on use a routerboard 532 with mikrotik ...