Community discussions

Search found 51 matches

  • 1
  • 2
by ciberica
Sun May 12, 2019 7:37 am
Forum: General
Topic: Frequent PPPoE terminations
Replies: 11
Views: 1365

Re: Frequent PPPoE terminations

Hello, has someone solved it or do you know why this happens?
by ciberica
Sat May 04, 2019 8:55 pm
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 802

Re: victim of attack PPPOE

Thank you very much, I have been very helpful, I'm going to put on all the challenged to 2000ms and with that I have already lowered the CPU a lot, I have also found the attacker, it seems a firmware problmea of a sxt lite AC 5

Again, Thank you very much for your help
by ciberica
Sat May 04, 2019 1:24 pm
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 802

Re: victim of attack PPPOE

What more data do you need? Ask them and I will be happy to facilitate them?
by ciberica
Mon Apr 22, 2019 2:33 pm
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 802

Re: victim of attack PPPOE

I do not have the wifi open, I have security wpa2, and once it connects to the network with the credentials the pppoe dial is made
by ciberica
Mon Apr 22, 2019 10:38 am
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 802

Re: victim of attack PPPOE

Hi, what can I do? I created rules in the bridge to block the mac. Because when it takes 5 minutes maximum blocks the router and restarts and so continuously.

How can I avoid it ...?
by ciberica
Thu Apr 18, 2019 10:30 pm
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 802

victim of attack PPPOE

I think I'm being the victim of an attack because in the log I get what appears in the image and this causes me to block the computer. I have managed to find out which sector is the problem but I do not know how to block this ip address. Can you help me? I currently use a radius server to authentica...
by ciberica
Tue Apr 09, 2019 2:30 am
Forum: General
Topic: update cpe
Replies: 0
Views: 183

update cpe

hello friends again, I have to do an update of some cpd and I would like to know if there is any way to do them all at once without having to go one by one. If it can be done with a scrip or with the dude

Thank you
by ciberica
Tue Apr 09, 2019 2:29 am
Forum: Scripting
Topic: update cpe
Replies: 0
Views: 232

update cpe

hello friends again, I have to do an update of some cpd and I would like to know if there is any way to do them all at once without having to go one by one. If it can be done with a scrip or with the dude

Thank you
by ciberica
Sun Mar 24, 2019 3:42 am
Forum: General
Topic: help to create server radius with sql and and web php form [SOLVED]
Replies: 3
Views: 333

Re: help to create server radius with sql and and web php form [SOLVED]

Thank you very much, I did not realize. Think that as you have to connect to mikrotik someone from here would have done it or looked for those documents to make my ARP
by ciberica
Sun Mar 10, 2019 6:07 am
Forum: General
Topic: help to create server radius with sql and and web php form [SOLVED]
Replies: 3
Views: 333

help to create server radius with sql and and web php form [SOLVED]

Hello Friends, I just installed freeRadius. Does anyone know where I can find documentation to configure it with mikrotik? I need to know where I have to insert the data in sql to be able to control the user and password, connection time, connection time, disconnection time and limit the speed I kno...
by ciberica
Wed Mar 06, 2019 2:23 am
Forum: General
Topic: Someone with a procedure to align antennas?
Replies: 0
Views: 190

Someone with a procedure to align antennas?

What is the procedure to obtain the best ccq in the alignment? I'm currently watching the winbox in the wireless / register section and moving the antenna until I think it's okay Is there any other more effective way? With my method sometimes it happens that it has a good signal 54/50 but the CC is ...
by ciberica
Mon Feb 18, 2019 4:51 am
Forum: General
Topic: error conect pppoe-server
Replies: 6
Views: 468

Re: error conect pppoe-server

I have exported the configuration of a SXT Lite Ac 5 that works perfectly. To use it in an SXTsq I have replaced wlan2 -> wlan1 because the SXTsq only has Wlan1 /interface wireless set [ find default-name=wlan1 ] ssid=MikroTik set [ find default-name=wlan2 ] band=5ghz-a/n/ac country=spain \ default-...
by ciberica
Sat Feb 16, 2019 9:50 am
Forum: General
Topic: error conect pppoe-server
Replies: 6
Views: 468

Re: error conect pppoe-server

hello friend.
if I updated the antenna.

I attach the configuration in a file.
The antenna if I register in the ap but is not able to up the ppoe client interface
by ciberica
Sat Feb 16, 2019 7:40 am
Forum: General
Topic: error conect pppoe-server
Replies: 6
Views: 468

error conect pppoe-server

hello, does anyone know why the new antenna sxt sq ac 5 does not connect me to the server pppoe-server and the old sxt lite ac 5 yes ?,

I have used the same configuration. "export file = backup.txt" and I have pasted it in the new sq.
by ciberica
Wed Feb 06, 2019 4:07 am
Forum: General
Topic: PTP SXT LITE 5 AC low speed
Replies: 0
Views: 349

PTP SXT LITE 5 AC low speed

I'm having trouble making an ptp link. of about 400 m with direct vision. The most I've got of speed would be:

21Mbs of point A -B
31Mbs from point B-A

I leave the configuration files if you see something strange ....

thank you
PTPA.rsc
ptpB.rsc
by ciberica
Mon Feb 04, 2019 2:39 am
Forum: General
Topic: firewall [SOLVED]
Replies: 7
Views: 635

Re: firewall [SOLVED]

all clients are separated, each client is connected to an ethernet port
by ciberica
Sun Feb 03, 2019 2:47 am
Forum: General
Topic: firewall [SOLVED]
Replies: 7
Views: 635

Re: firewall [SOLVED]

Sorry for not being clear, I explain myself better 1- I have an RB2011 where in the eth10 arrives at CCR1009 with internet access. 2- In the RB2011 are connected 5 clients by ethernet, eth1, ether2, ether3, .... 3- all of them are in a brich 4-I do not want them to be able to access winbox. So they ...
by ciberica
Sat Feb 02, 2019 5:30 am
Forum: General
Topic: much difference between tx / Rx
Replies: 0
Views: 319

much difference between tx / Rx

someone who helps me, or who happens the same .... I have some antennas that have a lot of difference between the rx and the tx and I do not know how to fix it this is my cpe client configuration, sxt lite 5 ac /interface wireless set [ find default-name=wlan1 ] ssid=MikroTik set [ find default-name...
by ciberica
Sat Feb 02, 2019 5:23 am
Forum: General
Topic: firewall [SOLVED]
Replies: 7
Views: 635

firewall [SOLVED]

[flash=][/flash]Can someone help me create a firewall rule so that clients can not access the winbox port through ethernet?

I created this rule but can continue to enter the rb2011

add action=drop chain=forward in-interface=bridge1 protocol=tcp src-port=8291
by ciberica
Fri Jan 25, 2019 5:19 am
Forum: General
Topic: No country [SOLVED]
Replies: 4
Views: 563

Re: No country [SOLVED]

Hi, can you tell me how I have to do it?
by ciberica
Sun Jan 20, 2019 6:07 am
Forum: General
Topic: TX and RX rate
Replies: 0
Views: 255

TX and RX rate

I need your help again, I have a 922UAGS-5HPacD AC mikrotik, and reading in the forum says that to optimize resources better it is good that customers only synchronize at the necessary speed, but it is not clear to me how to do it. Currently I have 3 types of clients 10/20/50 Mbs Could you tell me w...
by ciberica
Sun Jan 20, 2019 5:42 am
Forum: General
Topic: No country [SOLVED]
Replies: 4
Views: 563

No country [SOLVED]

Hello, is it possible to scan all frequencies from 4.9-6.1 Ghz when mikrotik is in "country = no_country?

If I put that city and give it to scan frequency, I only get some not all available ...
by ciberica
Mon Jan 07, 2019 4:04 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1192

Re: RB922UAGS-5HPacD slow speed [SOLVED]

6.43.8
by ciberica
Mon Jan 07, 2019 4:03 am
Forum: General
Topic: much difference between tx / Rx
Replies: 4
Views: 373

Re: much difference between tx / Rx

Yes, they are the same.
by ciberica
Sun Jan 06, 2019 5:54 am
Forum: General
Topic: much difference between tx / Rx
Replies: 4
Views: 373

Re: much difference between tx / Rx

I had not updated yet. I have set another frequency and it remains the same ..... the max distance would be 1500m at the most. There is direct vision. As much as I move the antenna I do not get to equal the tx / rx, the best I could have left it with a difference of 7 dB. I have seen that it also ha...
by ciberica
Sun Jan 06, 2019 5:20 am
Forum: General
Topic: much difference between tx / Rx
Replies: 4
Views: 373

much difference between tx / Rx

I am realizing that I have many clients who have increased the dBm after a while, for example: I have a cpe that had 49/50 dBm tx / rx Now the same cpe has 49/59 dBm Tx / Rx we have tried to reorient the antenna and we have not achieved anything, changed the frequency and we have even put another an...
by ciberica
Sun Jan 06, 2019 5:05 am
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1118

Re: Renew IP address of PPPoE client

thank
by ciberica
Sun Jan 06, 2019 5:02 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1192

Re: RB922UAGS-5HPacD slow speed [SOLVED]

In the new update the NV2 has been implemented, going from having a bandwidth of 30 Mbs to about 60 Mbs with the same clients.
by ciberica
Sun Jan 06, 2019 5:00 am
Forum: General
Topic: S.O.S. disconnected, control frame timeout [SOLVED]
Replies: 5
Views: 784

Re: S.O.S. disconnected, control frame timeout [SOLVED]

Hi, I think I solved it in the following way: When I upgraded to the latest version Mikrotik blocked the use of superchanel in Spain, that caused me that all the APs that had configured the country as Spain and superchanel, would emit only a frequency of 5Ghz that had a lot of noise I hope you serve...
by ciberica
Fri Jan 04, 2019 4:47 am
Forum: General
Topic: S.O.S. disconnected, control frame timeout [SOLVED]
Replies: 5
Views: 784

Re: S.O.S. disconnected, control frame timeout [SOLVED]

I currently use RADIO but attached security profile capture
Screenshot_2.jpg
by ciberica
Thu Jan 03, 2019 10:58 pm
Forum: General
Topic: S.O.S. disconnected, control frame timeout [SOLVED]
Replies: 5
Views: 784

S.O.S. disconnected, control frame timeout [SOLVED]

HELP PLEASE ....

I have updated to the latest stable version (6.43.8) my sxt lite ac5 and my ap, and now they are continuously disconnecting "disconnected, control frame timeout"

Has this happened to you and solved it?
Screenshot_1.jpg
by ciberica
Tue Jan 01, 2019 5:09 am
Forum: General
Topic: vlan VS eoip tunnel [SOLVED]
Replies: 1
Views: 336

vlan VS eoip tunnel [SOLVED]

Hi, I have a question ... What is more efficient to use vlan or eoip tunnel? I use it to connect an ap with the ccr that the pppoe server has. I do not know if it is better to assign a vlan to the ap, so then I have to add it to the swich that is normally connected and also configure it in ccr where...
by ciberica
Mon Dec 31, 2018 12:09 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1192

Re: RB922UAGS-5HPacD slow speed [SOLVED]

How to make this change? Is it done in the cpd part?

I currently have clients that have voice / IP but others do not ... can I modify it in those that do not ... or do they have to be all?

Sorry for so many questions
by ciberica
Mon Dec 31, 2018 3:09 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1192

Re: RB922UAGS-5HPacD slow speed [SOLVED]

What client devices you are using?
Sxt Lite5 ac?
Yes, and I used NV2
by ciberica
Sun Dec 30, 2018 5:47 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1192

Re: RB922UAGS-5HPacD slow speed [SOLVED]

Hello, I enclose the image as you have asked me
by ciberica
Sun Dec 30, 2018 12:53 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1192

Re: RB922UAGS-5HPacD slow speed [SOLVED]

Hello this is my wireless registration

Image
by ciberica
Sun Dec 30, 2018 5:40 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1192

RB922UAGS-5HPacD slow speed [SOLVED]

hello I have an antenna RB922UAGS-5HPacD connected to RF Elements SH-TP-5-30 (sector antenna of 30 º and 15db) The problem that arises is that if I only connect a cpe (sxt lite ac 5) the maximum speed that facilitates me with ptmp is 30 Mbs. Currently, between 20 and 30 clients are connected with a ...
by ciberica
Fri Dec 14, 2018 2:36 am
Forum: General
Topic: /ip cloud Error: request time out
Replies: 5
Views: 727

/ip cloud Error: request time out

Hi, I have several mikrotic routers directly connected to the internet. Until very recently, the MIKROTIK DDNS worked very well for me, but I have not updated the ip for more than 1 month and when you give it to force update, it gives me the following error "Error: request time out" Has this happene...
by ciberica
Sun Dec 09, 2018 10:57 am
Forum: General
Topic: server rsyslogic (mysql) + loganalyzer [SOLVED]
Replies: 2
Views: 394

Re: server rsyslogic (mysql) + loganalyzer [SOLVED]

Thank you very much for sending me the link, I'm looking at it and I think it's GREAT.


Thank you so much
by ciberica
Sun Dec 09, 2018 8:51 am
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1118

Re: Renew IP address of PPPoE client

Hello friend, how have you managed to change the ip every so often to pppoe customers?
by ciberica
Sun Dec 09, 2018 8:46 am
Forum: General
Topic: server rsyslogic (mysql) + loganalyzer [SOLVED]
Replies: 2
Views: 394

server rsyslogic (mysql) + loganalyzer [SOLVED]

Hi again, I recently installed a rsyslog server with loganalycer. I have configured several Mikrotik, and I would like it when saving the hostname in the BD (MYSQL) as it appears in the identity of mikrotik. Currently when mikrotik sends the logs to the rsyslog, I split the identity name in two, a p...
by ciberica
Thu Nov 08, 2018 5:12 am
Forum: General
Topic: LHG 60G Low speed [SOLVED]
Replies: 6
Views: 606

Re: LHG 60G Low speed [SOLVED]

Thank you very much, I did not know this method to measure the speed, but from now on I will do it that way.
I was much calmer when I saw the results of the test.
Tx = 994Mbs
Rx = 998Mbs

Attached screenshot of the dude where he measures the speed between the two links.


THANK YOU
Screenshot_2.jpg
by ciberica
Mon Nov 05, 2018 9:51 am
Forum: General
Topic: LHG 60G Low speed [SOLVED]
Replies: 6
Views: 606

Re: LHG 60G Low speed [SOLVED]

the last test I have done gives me separately tx = 598 and rx 587

If I do the test with both gives me tx = 199 / rx = 187

Do you know what it can be?

a greeting
by ciberica
Sat Nov 03, 2018 6:51 am
Forum: General
Topic: LHG 60G Low speed [SOLVED]
Replies: 6
Views: 606

LHG 60G Low speed [SOLVED]

Hello friends, I have a problem with the new 60 Ghz antennas that mikrotik has taken, the LHG 60G model, which are 2 preconfigured antennas. According to specifications, the maximum distance is 1km. I have 500m, it also says that the maximum synchronization is 2.5Ghz, I have them linked to 2.3Ghz. H...
by ciberica
Sun Oct 28, 2018 5:55 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 279
Views: 35800

Re: wAP 60G experience

Hi, I have problems with my mikrotik. I can not get more than 200 symmetric Mbs If I do a btest only with Tx = 596 and Rx = 0 Mbs If I do u btest only reception TX = 0 and RX = 450 Mbs I do the teas with Tx and RX and the result is Tx = 145 and Rx = 98 - 120 (it has fluctuations) The distance <600 m...
by ciberica
Mon May 21, 2018 8:33 am
Forum: General
Topic: S.O.S. HELP ME PLEASE [SOLVED]
Replies: 11
Views: 927

Re: S.O.S. HELP ME PLEASE [SOLVED]

BIte the bullet, give customers one free month of rental and reconfig your units and then backup regularly. I would also state you need to update your OS regularly and CLOSE all the open doors into your routers. There is no other solution for shooting yourself in the foot. Good morning friends, I'd...
by ciberica
Sun May 20, 2018 12:22 pm
Forum: General
Topic: S.O.S. HELP ME PLEASE [SOLVED]
Replies: 11
Views: 927

Re: S.O.S. HELP ME PLEASE [SOLVED]

I don't understand... Just reset the device, import there last export, secure it to prevent repeating of hacking, and you are fine. It is task for few minutes.
Thank you very much for your help, I will have to redo the configuration because the last backup is from 08-2017.

a greeting
by ciberica
Sat May 19, 2018 10:12 pm
Forum: General
Topic: S.O.S. HELP ME PLEASE [SOLVED]
Replies: 11
Views: 927

Re: S.O.S. HELP ME PLEASE [SOLVED]

ANAV friend, I do not want you to be offended by what I say, but that's what I'll do again, creating this topic has been to help me and not to tell me what I already know. In this situation, only two possibilities are available for resetting or paying and for now I am telling you that I will not acc...
by ciberica
Sat May 19, 2018 4:19 pm
Forum: General
Topic: S.O.S. HELP ME PLEASE [SOLVED]
Replies: 11
Views: 927

S.O.S. HELP ME PLEASE [SOLVED]

Hello everyone, I ask for your help to recover my network, I am a WISP and I have been kidnapped by a ccd, and they ask me for a ransom. Currently the ccr has version 6.40 and I'm trying to execute the smb security bug script published recently, but when I run the code I get online failure 140. Some...
  • 1
  • 2