MikroTik

ciberica

Hello friends, I need your help, I currently have the IP range 154.59.208.0 / 23 rented. We are having problems with the 154.59.209.0/24 range while the 154.59.208.0/24 range if managed well. Currently we have two ccr, the first with ip 149.60.38.86 which uses the public range for clients of ip 154....

ciberica

Because you can't fast track and actually have to route and use encryption, for what you asked But the configuration shows neither - fasttracking cannot speed up anything as the firewall is not there at all, and encryption is not used either. Do I read it right that the main WAN is PPPoE? In this c...

ciberica

2011 is way to slow to hit 600 for just straight NAT. Pick up an hAP AC2. Much better processor and IPSec acceleration built in.

How do you explain that if I do a speed test at headquarters A without the tunnel with a speed of more than 200 Mbs?

ciberica

Post the config of the 2011, some configuration optimizations may help a bit, but I am afraid it is simply too weak to handle a symmetric 600 Mbit/s link. See the hint on anonymisation in my automatic signature below.

attached the confirmation

ciberica

What are the upload and download speeds of internet uplinks at sites A and B? If you connect from site A to internet via site B, each packet goes through site B's uplink twice. What is the ping response delay when you ping from site A to site B's public IP (no tunnel)? Long round-trip delays affect...

ciberica

Which model?

El enrutador en la sede A con IP estadística que es la que aloja el servidor pptp o el L2TP el modelo es CCR1009-8G-1S-1S +

En la sede B que es el que hace la marca PPTP o L2TP (cliente) es un RB2011

THK

ciberica

Hello friends. I have connected two offices with two mikoritk routers and I have carried out 2 tests, both with the same result 1-test: I have connected the headquarters B-> A with PPTP protocol, All the traffic leaves through the headquarters A through a static route. But the clients who are connec...

ciberica

The idea is to be able to access from the central router Mikrotik CCRxxx at 2 ominitik, right now I only access the first omnitik.01 or called .old, and the second omnitik I have not managed to access. Well, that high level design is clear, my question was regarding the implementation details :) So...

ciberica

I don't understand your idea regarding the IP addressing. The IP address of omnitik_old_.00 is attached to ether3 itself, so no VLAN tag. The IP address of Omnitik.01 is in the VLAN 1132, because the whole bridge1 on omnitik_old_.00 is connected to the tagless end of the /interface vlan attached to...

ciberica

You are right I have uploaded the current configuration, it is possible that some IP do not match the previous graph since I continue to carry out tests. What I had in mind was the configuration file export from the devices. The drawing, even though updated, says nothing about what you have actuall...

ciberica

Many people can help you if you post the export of the current configuration of the two Omnitiks. See my automatic signature just below regarding anyonymisation. You are right I have uploaded the current configuration, it is possible that some IP do not match the previous graph since I continue to ...

ciberica

Hello friends, I have a problem. I want to expand the coverage by putting another OMNITIK Currently I have an Omnitik and it works fine, it has on port 3 with a vlan123, connected to a ptp to the central node. It has a bridge, with all the ports and the vlan except the ehter3 clients connect by ppoe...

ciberica

Hello, I am also Spanish and I use FREERDIUS with mikrotik, I had the version of freeradius 2.0 and it worked well I have updated to version 3.0 and I have realized that I cannot use any special character in the username, such as "@ " I don't know if you have been able to solve this in any...

ciberica

Hello friends, you have found the solution that has happened to me since a January 2020 update

Greetings

ciberica

Hi, We have a Radius server running Freeradius with mysql backend. We use it for pptp authetication and everything works fine. I would just like to know what attribute or setting needs to be changed to have custom names for the simple queues. Currently the queue gets the name of the authenticated u...

ciberica

Hi, We have a Radius server running Freeradius with mysql backend. We use it for pptp authetication and everything works fine. I would just like to know what attribute or setting needs to be changed to have custom names for the simple queues. Currently the queue gets the name of the authenticated u...

ciberica

Hi, We have a Radius server running Freeradius with mysql backend. We use it for pptp authetication and everything works fine. I would just like to know what attribute or setting needs to be changed to have custom names for the simple queues. Currently the queue gets the name of the authenticated u...

ciberica

Can somebody help me? I have created a hotspot with mikrotik rb1122. I have created several connection profiles: *1 hour, * 2h, But when the established time passes if the user registers with his username and password he adds 1h more deconexion again and thus he can always be connected. I want the t...

ciberica

Hello, has someone solved it or do you know why this happens?

ciberica

Thank you very much, I have been very helpful, I'm going to put on all the challenged to 2000ms and with that I have already lowered the CPU a lot, I have also found the attacker, it seems a firmware problmea of a sxt lite AC 5

Again, Thank you very much for your help

ciberica

What more data do you need? Ask them and I will be happy to facilitate them?

ciberica

I do not have the wifi open, I have security wpa2, and once it connects to the network with the credentials the pppoe dial is made

ciberica

Hi, what can I do? I created rules in the bridge to block the mac. Because when it takes 5 minutes maximum blocks the router and restarts and so continuously.

How can I avoid it ...?

ciberica

I think I'm being the victim of an attack because in the log I get what appears in the image and this causes me to block the computer. I have managed to find out which sector is the problem but I do not know how to block this ip address. Can you help me? I currently use a radius server to authentica...

ciberica

hello friends again, I have to do an update of some cpd and I would like to know if there is any way to do them all at once without having to go one by one. If it can be done with a scrip or with the dude

Thank you

ciberica

hello friends again, I have to do an update of some cpd and I would like to know if there is any way to do them all at once without having to go one by one. If it can be done with a scrip or with the dude

Thank you

ciberica

Thank you very much, I did not realize. Think that as you have to connect to mikrotik someone from here would have done it or looked for those documents to make my ARP

ciberica

Nobody who can help me!

ciberica

Hello Friends, I just installed freeRadius. Does anyone know where I can find documentation to configure it with mikrotik? I need to know where I have to insert the data in sql to be able to control the user and password, connection time, connection time, disconnection time and limit the speed I kno...

ciberica

What is the procedure to obtain the best ccq in the alignment? I'm currently watching the winbox in the wireless / register section and moving the antenna until I think it's okay Is there any other more effective way? With my method sometimes it happens that it has a good signal 54/50 but the CC is ...

ciberica

I have exported the configuration of a SXT Lite Ac 5 that works perfectly. To use it in an SXTsq I have replaced wlan2 -> wlan1 because the SXTsq only has Wlan1 /interface wireless set [ find default-name=wlan1 ] ssid=MikroTik set [ find default-name=wlan2 ] band=5ghz-a/n/ac country=spain \ default-...

ciberica

hello friend.
if I updated the antenna.

I attach the configuration in a file.
The antenna if I register in the ap but is not able to up the ppoe client interface

ciberica

hello, does anyone know why the new antenna sxt sq ac 5 does not connect me to the server pppoe-server and the old sxt lite ac 5 yes ?,

I have used the same configuration. "export file = backup.txt" and I have pasted it in the new sq.

ciberica

I'm having trouble making an ptp link. of about 400 m with direct vision. The most I've got of speed would be:

21Mbs of point A -B
31Mbs from point B-A

I leave the configuration files if you see something strange ....

thank you

PTPA.rsc

ptpB.rsc

ciberica

all clients are separated, each client is connected to an ethernet port

ciberica

Sorry for not being clear, I explain myself better 1- I have an RB2011 where in the eth10 arrives at CCR1009 with internet access. 2- In the RB2011 are connected 5 clients by ethernet, eth1, ether2, ether3, .... 3- all of them are in a brich 4-I do not want them to be able to access winbox. So they ...

ciberica

someone who helps me, or who happens the same .... I have some antennas that have a lot of difference between the rx and the tx and I do not know how to fix it this is my cpe client configuration, sxt lite 5 ac /interface wireless set [ find default-name=wlan1 ] ssid=MikroTik set [ find default-name...

ciberica

[flash=][/flash]Can someone help me create a firewall rule so that clients can not access the winbox port through ethernet?

I created this rule but can continue to enter the rb2011

add action=drop chain=forward in-interface=bridge1 protocol=tcp src-port=8291

ciberica

Hi, can you tell me how I have to do it?

ciberica

I need your help again, I have a 922UAGS-5HPacD AC mikrotik, and reading in the forum says that to optimize resources better it is good that customers only synchronize at the necessary speed, but it is not clear to me how to do it. Currently I have 3 types of clients 10/20/50 Mbs Could you tell me w...

ciberica

Hello, is it possible to scan all frequencies from 4.9-6.1 Ghz when mikrotik is in "country = no_country?

If I put that city and give it to scan frequency, I only get some not all available ...

ciberica

6.43.8

ciberica

Yes, they are the same.

ciberica

I had not updated yet. I have set another frequency and it remains the same ..... the max distance would be 1500m at the most. There is direct vision. As much as I move the antenna I do not get to equal the tx / rx, the best I could have left it with a difference of 7 dB. I have seen that it also ha...

ciberica

I am realizing that I have many clients who have increased the dBm after a while, for example: I have a cpe that had 49/50 dBm tx / rx Now the same cpe has 49/59 dBm Tx / Rx we have tried to reorient the antenna and we have not achieved anything, changed the frequency and we have even put another an...

ciberica

thank

ciberica

In the new update the NV2 has been implemented, going from having a bandwidth of 30 Mbs to about 60 Mbs with the same clients.

ciberica

Hi, I think I solved it in the following way: When I upgraded to the latest version Mikrotik blocked the use of superchanel in Spain, that caused me that all the APs that had configured the country as Spain and superchanel, would emit only a frequency of 5Ghz that had a lot of noise I hope you serve...

ciberica

I currently use RADIO but attached security profile capture

Screenshot_2.jpg

ciberica

HELP PLEASE ....

I have updated to the latest stable version (6.43.

my sxt lite ac5 and my ap, and now they are continuously disconnecting "disconnected, control frame timeout"

Has this happened to you and solved it?

Screenshot_1.jpg

ciberica

Hi, I have a question ... What is more efficient to use vlan or eoip tunnel? I use it to connect an ap with the ccr that the pppoe server has. I do not know if it is better to assign a vlan to the ap, so then I have to add it to the swich that is normally connected and also configure it in ccr where...

ciberica

How to make this change? Is it done in the cpd part?

I currently have clients that have voice / IP but others do not ... can I modify it in those that do not ... or do they have to be all?

Sorry for so many questions

ciberica

What client devices you are using?
Sxt Lite5 ac?

Yes, and I used NV2

ciberica

Hello, I enclose the image as you have asked me

ciberica

Hello this is my wireless registration

ciberica

hello I have an antenna RB922UAGS-5HPacD connected to RF Elements SH-TP-5-30 (sector antenna of 30 º and 15db) The problem that arises is that if I only connect a cpe (sxt lite ac 5) the maximum speed that facilitates me with ptmp is 30 Mbs. Currently, between 20 and 30 clients are connected with a ...

ciberica

Hi, I have several mikrotic routers directly connected to the internet. Until very recently, the MIKROTIK DDNS worked very well for me, but I have not updated the ip for more than 1 month and when you give it to force update, it gives me the following error "Error: request time out" Has th...

ciberica

Thank you very much for sending me the link, I'm looking at it and I think it's GREAT.

Thank you so much

ciberica

Hello friend, how have you managed to change the ip every so often to pppoe customers?

ciberica

Hi again, I recently installed a rsyslog server with loganalycer. I have configured several Mikrotik, and I would like it when saving the hostname in the BD (MYSQL) as it appears in the identity of mikrotik. Currently when mikrotik sends the logs to the rsyslog, I split the identity name in two, a p...

ciberica

Thank you very much, I did not know this method to measure the speed, but from now on I will do it that way.
I was much calmer when I saw the results of the test.
Tx = 994Mbs
Rx = 998Mbs

Attached screenshot of the dude where he measures the speed between the two links.

THANK YOU

Screenshot_2.jpg

ciberica

the last test I have done gives me separately tx = 598 and rx 587

If I do the test with both gives me tx = 199 / rx = 187

Do you know what it can be?

a greeting

ciberica

Hello friends, I have a problem with the new 60 Ghz antennas that mikrotik has taken, the LHG 60G model, which are 2 preconfigured antennas. According to specifications, the maximum distance is 1km. I have 500m, it also says that the maximum synchronization is 2.5Ghz, I have them linked to 2.3Ghz. H...

ciberica

Hi, I have problems with my mikrotik. I can not get more than 200 symmetric Mbs If I do a btest only with Tx = 596 and Rx = 0 Mbs If I do u btest only reception TX = 0 and RX = 450 Mbs I do the teas with Tx and RX and the result is Tx = 145 and Rx = 98 - 120 (it has fluctuations) The distance <600 m...

ciberica

BIte the bullet, give customers one free month of rental and reconfig your units and then backup regularly. I would also state you need to update your OS regularly and CLOSE all the open doors into your routers. There is no other solution for shooting yourself in the foot. Good morning friends, I'd...

ciberica

I don't understand... Just reset the device, import there last export, secure it to prevent repeating of hacking, and you are fine. It is task for few minutes.

Thank you very much for your help, I will have to redo the configuration because the last backup is from 08-2017.

a greeting

ciberica

ANAV friend, I do not want you to be offended by what I say, but that's what I'll do again, creating this topic has been to help me and not to tell me what I already know. In this situation, only two possibilities are available for resetting or paying and for now I am telling you that I will not acc...

ciberica

Hello everyone, I ask for your help to recover my network, I am a WISP and I have been kidnapped by a ccd, and they ask me for a ransom. Currently the ccr has version 6.40 and I'm trying to execute the smb security bug script published recently, but when I run the code I get online failure 140. Some...

ciberica

Hello everyone, I need help, I have a mikrotik router which works perfectly for a couple of years, the problem comes when I want to change the configuration and I do not remember for sure, neither the user nor the password. Searching, I have found, a session file of the winbox. This file is the one ...

Search found 69 matches