Community discussions

Search found 35 matches

by raystream
Mon Mar 25, 2019 3:48 pm
Forum: RouterBOARD hardware
Topic: mAP lite no ethernet connection
Replies: 3
Views: 148

Re: mAP lite no ethernet connection

i know that guide.
But netinstall is not working as written in my starting post.
by raystream
Mon Mar 25, 2019 10:33 am
Forum: RouterOS v6 RC and v7 BETA
Topic: Suggestion: Completely virtual router based on two physical routers
Replies: 45
Views: 8122

Re: Suggestion: Completely virtual router based on two physical routers

how can i do a software upgrade after installing your ha sytem?

Just update the primary and then the secondary goes active when the primary reboots
after that upgrade the second one

will the patch be still there after upgrade?
by raystream
Fri Mar 22, 2019 8:18 am
Forum: RouterBOARD hardware
Topic: mAP lite no ethernet connection
Replies: 3
Views: 148

mAP lite no ethernet connection

Hi after updating my mAP lite to the actual routerOS version the ethernet port stopped working. Wireless is working but the ethernet port only auto negotiate on 10M full duplex without any traffic going trough the port. i tried updating it to the actual beta and upgrading the routerboard firmware wi...
by raystream
Wed Mar 13, 2019 1:32 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 54
Views: 5218

Re: MUM Europe 2019: new hardware

better scenario:

[Router](RJ45) ---<UTP>--- (RJ45)[POWERLINE DEVICE]---(230V socket) ===<mains wall cable>=== (230V socket)[new mikrotik POWERLINE DEVICE](microUSB) ---[mAP lite] ~~~ <WiFi> ~~~ [PC]

good to get an AP running in a place without ethernet cable connection.
by raystream
Tue Mar 12, 2019 3:20 pm
Forum: Wireless Networking
Topic: UnIFI Access Points with Mikrotik Switch
Replies: 3
Views: 179

Re: UnIFI Access Points with Mikrotik Switch

yes just buy a POE injector for each AP.
by raystream
Tue Mar 12, 2019 1:29 pm
Forum: Wireless Networking
Topic: UnIFI Access Points with Mikrotik Switch
Replies: 3
Views: 179

Re: UnIFI Access Points with Mikrotik Switch

Hi

the CRS326-24G-2S has no POE.
so no power over ethernet.
If you need a 24port Switch with POE you should have bought a CRS328-24P-4S+RM

The difference is the P behind the port count.
by raystream
Wed Mar 06, 2019 11:23 am
Forum: RouterBOARD hardware
Topic: hardware idea for a multiport switch
Replies: 40
Views: 4433

Re: hardware idea for a multiport switch

dont think this concept will work.
what i would like to see is a "port expander":
a Master Switch with all the intelligence and 1 or 2 Expand-Ports
a Expander with 24 or 48 Ports without intelligence

Just expand the port count without the need to manage another switch (nexus like)
by raystream
Fri Jan 11, 2019 8:53 am
Forum: Virtualization
Topic: CHR feature requests
Replies: 54
Views: 7916

Re: CHR feature requests

you cant just copy the image to a disk. it is a container for the hypervisor and uses only virtual devices without drivers for the baremetal server. But you are talking about using a server with so much cores and ram and cant afford an esc licence for around 800€ per CPU? The Server is abaout 3000€ ...
by raystream
Thu Oct 25, 2018 12:56 pm
Forum: General
Topic: ip cloud gets no WAN IP
Replies: 2
Views: 187

Re: ip cloud gets no WAN IP

the RB3011 is runnning version 6.43.4
by raystream
Thu Oct 25, 2018 12:34 pm
Forum: General
Topic: ip cloud gets no WAN IP
Replies: 2
Views: 187

ip cloud gets no WAN IP

Hello, i have changed my RB750Gr3 to an RB3011. Everything is working fine but i have Problems with the ip cloud. The RB3011 is behind an FritzBox (NAT). The output of /ip cloud print is ddns-enabled: yes update-time: yes dns-name: ???.sn.mynetname.net status: updating... ??? ist only a placeholder ...
by raystream
Wed Jul 18, 2018 3:29 pm
Forum: RouterBOARD hardware
Topic: Guidance to choose mikrotik device
Replies: 4
Views: 516

Re: Guidance to choose mikrotik device

to make a suggestion there is more information needed: - what bandwidth is your ISP providing? - what bandwidth would you like to get on the site C - any firewall filters first i think you do not need 2 mikrotik devices just get an hap ac2 but we need to know the answers to the questions above to gi...
by raystream
Fri Jul 06, 2018 11:00 am
Forum: General
Topic: WAP LTE kit and port SMS
Replies: 19
Views: 2045

Re: WAP LTE kit and port SMS

i dont see the lte modem under ports, but using the following command in cli can send sms: [admin@MikroTik] /tool sms> send phone-number=5551234567890 message=test port=lte1 set port=lte1 before the send does not help i have to give the port argument with the send command. Sending sms ist only possi...
by raystream
Mon Jul 02, 2018 10:05 am
Forum: RouterBOARD hardware
Topic: woobm software restart feature
Replies: 2
Views: 388

Re: woobm software restart feature

you can power cycle only the USB port without power cycling the device where the woobm ist connected to.

just go to: System -> Routerboard there you can use the "USB Power Reset" button
by raystream
Fri Jun 08, 2018 1:36 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition
Replies: 52
Views: 10679

Re: RB1100AHx4 Dude Edition

The standard edition and the dude edition are nearly the same.
the only difference is that the dude edition have the sata and m2 connectors populatet on the pcb.
by raystream
Thu May 31, 2018 12:45 pm
Forum: RouterBOARD hardware
Topic: New : RB760IGS - HEX-S
Replies: 38
Views: 11140

Re: New : RB760IGS - HEX-S

can you show your rack mount adapter?
the indicators are very interesting.
yes, currently i'm travelling but on the weekend i'll take some pictures.
hi yould be great to get some pictures.
perhabs i can buy adapter from you or you can tell me how to build one by myself?
by raystream
Thu May 31, 2018 12:44 pm
Forum: General
Topic: RB750 1U RackMount
Replies: 0
Views: 178

RB750 1U RackMount

i would like to mount my RB750Gr3 and my RB260GSP in my 19" rack.
there are some solutions (balticnetworks and wisp.pl) but they have extrem high shipping cost for shipping to germany.

is there a distributor in germany?
by raystream
Fri May 18, 2018 10:47 am
Forum: RouterBOARD hardware
Topic: New : RB760IGS - HEX-S
Replies: 38
Views: 11140

Re: New : RB760IGS - HEX-S

How about RM(rackmount) version of Hex? You could use a tray and put a few of those little rascals side by side. ;-) we built a rack-mount kit that accommodates 2 of them and has lights-out to make the link/activity indicators visible even if the devices are tightly stacked on top of each other. ca...
by raystream
Thu May 17, 2018 5:29 pm
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

Re: LCD on CCR1009 without touchscreen

please help i would like to use an external usb or serial LCD on my CCR-1009-8G-1S that has no internal touchsreeen
by raystream
Mon May 14, 2018 10:55 am
Forum: RouterBOARD hardware
Topic: Main and Auxiliary fans of CCR1009-7G-1C-1S+
Replies: 1
Views: 397

Re: Main and Auxiliary fans of CCR1009-7G-1C-1S+

i have the same problem with my CCR-1009-8G-1S.
@mikrotik: is this how it should be?
by raystream
Fri May 11, 2018 10:43 am
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

Re: LCD on CCR1009 without touchscreen

i have a CRS109 with inbuild touchscreen. on this device i can install the lcd package for the mibsbe from the all packages file but in the all packages file for the tile devices there is no lcd package. so no system/LCD menu for my CCR-1009 is there a LCD package for USB LCD for the devices with ti...
by raystream
Wed May 09, 2018 12:23 pm
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

Re: LCD on CCR1009 without touchscreen

i dont have a lcd menu unter system on my ccr-1009-8G-1S
only the one for the touchscreen in the root menu
by raystream
Wed May 09, 2018 11:34 am
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

Re: LCD on CCR1009 without touchscreen

i dont want the touchscreen.
all i want is to connect a lcd like a crystalfontz cfa635 i have connected to other routerboards.
by raystream
Wed May 09, 2018 8:08 am
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

Re: LCD on CCR1009 without touchscreen

as i understand there is no possibility to use another display as the touchscreen that is built in the newer devices.
thought i can use an USB or Serial Display like on the Routerboards.
by raystream
Tue May 08, 2018 10:16 am
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

Re: LCD on CCR1009 without touchscreen

i know that the internal LCD are not connected via USB.

But my CCR1009 has no internal Display and i would like to add one.
I need the LCD package from the other devices.
by raystream
Mon May 07, 2018 10:50 am
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

Re: LCD on CCR1009 without touchscreen

nobody can help?
by raystream
Fri May 04, 2018 12:07 pm
Forum: Beginner Basics
Topic: LCD on CCR1009 without touchscreen
Replies: 12
Views: 992

LCD on CCR1009 without touchscreen

Hello

i have a ccr1009 without touchscreen here.
now i would like to use an external LCD.

The installed LCD package only let me configure a touchscreen i dont have.
i would like to configure the interface the external LCD is connected to.

thanx
by raystream
Tue Apr 24, 2018 3:30 pm
Forum: General
Topic: CapsMan and external CAP
Replies: 2
Views: 259

Re: CapsMan and external CAP

i now wrote a script that will man an dns lookup of the DNS name from the CAPsMAN controller and then writes the IP to the CAPs settings. the script only updates the IP in the setting when it has changed. :local DNSNAME caps.xxx.de :global previousIP :local currentIP [:resolve $DNSNAME] if ($previou...
by raystream
Wed Apr 18, 2018 11:24 am
Forum: General
Topic: CapsMan and external CAP
Replies: 2
Views: 259

CapsMan and external CAP

Hello i have a problem. My CapsMan Controller is on an internet line with a dynamic ip (i get a new ip every 24hours) now i would like to use the controller for CAPs on other internet lines. I have set the CapsMan Addresses field to the actual dynamic IP of my Controller and the CAP ist connecting a...
by raystream
Tue Apr 17, 2018 3:44 pm
Forum: The Dude
Topic: RB260GSP and Dude
Replies: 2
Views: 438

Re: RB260GSP and Dude

after setting the snmp protocol to v2c i get port stats
by raystream
Tue Apr 17, 2018 2:46 pm
Forum: The Dude
Topic: RB260GSP and Dude
Replies: 2
Views: 438

RB260GSP and Dude

Hi

i would like to read the Port Stats with snmp to visualise in the dude.
all i get with snmp in dude is the mac address table and the uptime
the RB260HSP is running SwOS 2.7

is there a way to get the other data?

thanx
by raystream
Fri Apr 13, 2018 12:49 pm
Forum: Wireless Networking
Topic: Wireless Mesh and Capsman
Replies: 3
Views: 1876

Re: Wireless Mesh and Capsman

I know not using a mesh is better
But i cannot run cables in the location
by raystream
Fri Apr 13, 2018 10:39 am
Forum: Wireless Networking
Topic: Wireless Mesh and Capsman
Replies: 3
Views: 1876

Wireless Mesh and Capsman

Hello i am trying to build up the following szenario: i have a RB750Gr3 as Router with an RB260GSP as switch behind. i have a hAP ac lite connected to the switch. the 2.4GHz WLAN of the hAP is configured via Capsman on the RB750Gr3. now i would like to have a wireless mesh on the 5GHz WLAN betwenn t...
by raystream
Mon Mar 26, 2018 11:27 am
Forum: General
Topic: hAP Lite no WLAN after deactivated CAP Mode
Replies: 1
Views: 152

Re: hAP Lite no WLAN after deactivated CAP Mode

a new install with netinstall solved the problem
by raystream
Mon Mar 26, 2018 10:20 am
Forum: General
Topic: hAP Lite no WLAN after deactivated CAP Mode
Replies: 1
Views: 152

hAP Lite no WLAN after deactivated CAP Mode

Hello,

i set my hAP Lite to CAP mode to test the CAPsman config.
After reseting it back to factory setting there is no WLAN interface showing up and in QuickSet i have only the ethernet option.

How can i get the WLAN Interface back?

best regards
by raystream
Tue Mar 20, 2018 6:59 pm
Forum: General
Topic: LEDs on alix 2d13 Board
Replies: 0
Views: 132

LEDs on alix 2d13 Board

Hello i would like to use the LEDs on my alix 2d13 board to show activity and status of my vpn connection. this is the info i have about the LEDs: LED2 (middle) GPIO G25 Read port 06180h bit 9 write port 06180h bit 9 / 25 LED3 (right) GPIO G27 Read port 06180h bit 11 Write port 06180h bit 11 / 27 Ho...