Community discussions

MikroTik App

Search found 50 matches

by jagowan
Mon Nov 03, 2008 7:13 am
Forum: General
Topic: NetXtreme BCM5702X Gigabit Ethernet
Replies: 0
Views: 643

NetXtreme BCM5702X Gigabit Ethernet

HI,

Mikrotik V 3.10 support Broadcom NetXtreme BCM5702X Gigabit Ethernet ?
by jagowan
Mon Jul 21, 2008 3:11 pm
Forum: General
Topic: Packet loss for multiple MTR trough Mikrotik Gateway
Replies: 0
Views: 925

Packet loss for multiple MTR trough Mikrotik Gateway

To all, I have strange situation with mikrotik as gateway. This is my ilustration [client PC] <----> [Mikrotik Gateway] <----> [Linux] 1. Client PC - ip 172.17.17.8 netmassk 255.255.255.240 - gateway 172.17.17.1 2. Mikrotik gateway - ip ether1 172.31.31.1 netmask 255.255.255.252 - ip ether2 172.17.1...
by jagowan
Wed May 14, 2008 8:08 am
Forum: General
Topic: Vlan Question
Replies: 0
Views: 593

Vlan Question

to All, I have 2 Mikrotik Router installed in each x86 PC base. Router1 o/s v3rc09 with 4 vlan on ether0 (vlan-name= vlan1 until vlan4) Router2 o/s v2.9.46 with 4 vlan on ether0 (vlan-name= vlan1 until vlan4) I have different result for torch each master vlan interface (eth0) in both Router1 and Rou...
by jagowan
Thu Nov 29, 2007 12:37 pm
Forum: General
Topic: [Hotspot v.3.0Rc11] something wrong or Bug?
Replies: 0
Views: 474

[Hotspot v.3.0Rc11] something wrong or Bug?

Hi,
I've have Hotpost server with DOM o/s lv 4 mikrotik v.3.0RC11 installed on PC. I've found something wrong in capturing rx/tx rate in /ip hotspot. There are difference value with real trafic. Maybe some one can explain to me.
Here my capture :

Thanks
by jagowan
Tue Sep 11, 2007 3:39 pm
Forum: General
Topic: bandwidth management for bypassed users
Replies: 2
Views: 631

Re: bandwidth management for bypassed users

using queue simple or tree

/queue simple add target-addresses=192.168.50.22 max-limit=256000/256000
by jagowan
Tue Sep 11, 2007 2:10 pm
Forum: The User Manager
Topic: uptime and voucher limit
Replies: 1
Views: 1765

Re: uptime and voucher limit

maybe you can try this example /tool user-manager credit add name=15m-unlimitedvoucer subscriber=admin time=1y full-price=1000 /tool user-manager user add name=bina password=bina uptime-limit= 15m add-credit= 15m-unlimitedvoucer subscriber=admin this configuration allow you to make user "bina" with ...
by jagowan
Tue Sep 11, 2007 1:44 pm
Forum: Beginner Basics
Topic: i can't open my yahoo messenger or my yahoo mail
Replies: 1
Views: 970

Re: i can't open my yahoo messenger or my yahoo mail

try to check DNS configuration and what kind of your WAN connection?
by jagowan
Tue Sep 11, 2007 1:38 pm
Forum: Wireless Networking
Topic: I am in Problem. If you can help me
Replies: 4
Views: 859

Re: I am in Problem. If you can help me

web key?
by jagowan
Tue Sep 11, 2007 1:31 pm
Forum: General
Topic: how configure pcq
Replies: 6
Views: 1217

Re: how configure pcq

There's an example for PCQ used in wiki

http://wiki.mikrotik.com/wiki/PCQ_Examples

rgrds
by jagowan
Thu Sep 06, 2007 4:45 pm
Forum: Wireless Networking
Topic: -95 signal on WDS?
Replies: 2
Views: 818

Re: -95 signal on WDS?

usually -95 shown if the link in idle state, please try send some trafic passtrough that wds.
by jagowan
Thu Aug 23, 2007 3:45 pm
Forum: Wireless Networking
Topic: maximum transmit power
Replies: 6
Views: 1322

Re: maximum transmit power

He5x, i think there're different wae :D .. thanks anyway
by jagowan
Wed Aug 22, 2007 4:54 pm
Forum: General
Topic: MT Hotspot and Rouge Routers
Replies: 8
Views: 1952

Re: MT Hotspot and Rouge Routers

I've test to change ttl = 1, and seemly work to prevent my wireless router to share internet connections. The illustration is : Internet <----> MT Hotspot <----->AP <----> MT wireless client <---> my laptop on MT Hotspot i aplied rule : /ip firewall mangle add chain=postrouting out-interface=ether2-...
by jagowan
Wed Aug 22, 2007 3:50 pm
Forum: General
Topic: MT Hotspot and Rouge Routers
Replies: 8
Views: 1952

Re: MT Hotspot and Rouge Routers

Hmm... change TTL = 1, i' have never tried this option yet, but soon I'll try. So far as i explore this forum, i found some interesting topic that similiar problems.

http://forum.mikrotik.com/viewtopic.php ... change+TTL

rgrds
by jagowan
Wed Aug 22, 2007 2:17 pm
Forum: Wireless Networking
Topic: Help!! hotspot problem!!!
Replies: 3
Views: 894

Re: Help!! hotspot problem!!!

userman installed on that RB112?
by jagowan
Wed Aug 22, 2007 2:13 pm
Forum: Wireless Networking
Topic: maximum transmit power
Replies: 6
Views: 1322

Re: maximum transmit power

maybe that is my stupid question, i'm sorry, "how to improve alignment" :D
by jagowan
Wed Aug 22, 2007 7:25 am
Forum: General
Topic: MT Hotspot and Rouge Routers
Replies: 8
Views: 1952

Re: MT Hotspot and Rouge Routers

idle-timeout (time | none; default: none) - idle timeout (maximal period of inactivity) for authorized clients. It is used to detect, that client is not using outer networks (e.g. Internet), i.e., there is NO TRAFFIC coming from that client and going through the router. Reaching the timeout, user w...
by jagowan
Tue Aug 21, 2007 5:14 pm
Forum: General
Topic: MT Hotspot and Rouge Routers
Replies: 8
Views: 1952

Re: MT Hotspot and Rouge Routers

The problem::: All other users and/or computers/devices connecting to linksys router after the first client logs in can now get free internet, as they are not prompted with sign in page. Because they have internet sharing connections from the router (nat), so, everyone connected with that router ha...
by jagowan
Sun Aug 19, 2007 11:49 am
Forum: Beginner Basics
Topic: P2P Filtering
Replies: 5
Views: 2202

Re: P2P Filtering

simple firewall configuration like this :

/ip firewall filter add chain=forward p2p=all-p2p action=drop time=00:00-00:00,sat,fri,thu,wed,tue,mon

put on top configuration.

rgrds
by jagowan
Sun Aug 19, 2007 8:52 am
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 35094

Re: CPE-Antenna alignment via customer / Application available?

Cmit, me to plz :D :D :D dianseh[at]sixnezer[dot]com thanks
by jagowan
Sun Aug 19, 2007 7:08 am
Forum: Wireless Networking
Topic: system cant ping radio
Replies: 1
Views: 528

Re: system cant ping radio

what about your PC firewall? have you check firewall not installed on that PC? or have you check ping from PC to RB?
by jagowan
Wed Aug 15, 2007 7:05 am
Forum: General
Topic: Configuring a station
Replies: 5
Views: 1165

Re: Configuring a station

I currently have a Mikrotik AP and I can get to my Wireless IP's of 192.168.8.0/24 and the Ethernet (dhcp, File server etc) on 10.50.0.0/24 network. But my station can talk to anything as well but I can't get a DHCP Server address from my 10.50.0.252 Windows 2003 server. Also I can't ping my laptop...
by jagowan
Fri Aug 10, 2007 9:05 am
Forum: General
Topic: PPTP Gateway Issue
Replies: 1
Views: 789

Re: PPTP Gateway Issue

who make vpn request? Client or Router ?
by jagowan
Fri Aug 10, 2007 8:47 am
Forum: Beginner Basics
Topic: how to route port
Replies: 3
Views: 2341

Re: how to route port

hi all

Want to know if it is possible to route let say port 2000 to this gateway "y" and port 20001 to gateway "z"

without to change the gateway

thanks
vincent
Request from LAN or from Router ?
by jagowan
Thu Aug 09, 2007 10:03 am
Forum: Wireless Networking
Topic: Bridge two networks, NOT Wds, only Layer 3
Replies: 15
Views: 2372

Re: Bridge two networks, NOT Wds, only Layer 3

it seems routing not bridge?
by jagowan
Mon Aug 06, 2007 4:14 pm
Forum: Wireless Networking
Topic: WDS, how to NAT each network?
Replies: 2
Views: 962

Re: WDS, how to NAT each network?

if i'm not mistake, what do you want is transparent bridge where network A and network B have same subnet. This is done with WDS mode or eoip tunnel.

http://wiki.mikrotik.com/wiki/Transpare ... wo_Network

rgrds
by jagowan
Fri Aug 03, 2007 2:32 pm
Forum: Beginner Basics
Topic: question about using command
Replies: 6
Views: 1774

Re: question about using command

if only in rule above you mention I don't need to add anything else it will work find ,if i add rule 11 X ;;; drop everything else chain=forward action=drop because with rule 11 disable, your router firewall in state accepting all trafic that not filtered by your firewall list. then I have to add t...
by jagowan
Fri Aug 03, 2007 8:49 am
Forum: General
Topic: Allow Only DHCPed clients through firewall
Replies: 6
Views: 5973

Re: Allow Only DHCPed clients through firewall

i think generate dynamic firewall bassed dhcp leased is not simple way, but if you only want to allow people who connected DHCP not static ip have internet connection, managing radius authentication and add arp leases and configure arp reply-only is enough.

rgrds
by jagowan
Fri Aug 03, 2007 8:36 am
Forum: General
Topic: Configuring a station
Replies: 5
Views: 1165

Re: Configuring a station

Your cisco have to wds enable in configuration and accept interconnection with Your MT WDS.
by jagowan
Fri Aug 03, 2007 8:28 am
Forum: Beginner Basics
Topic: question about using command
Replies: 6
Views: 1774

Re: question about using command

If I'm not mistake, enabling rule 11 make all trafic from your LAN can not passtrough Router BOX. You must add at least 1 rule to filter your LAN request. example : /ip firewall filter add chain=forward src-address=xxx.xxx.xxx.xxx in-interface=ether-LAN action=accept note : move this rule to number ...
by jagowan
Thu Aug 02, 2007 2:13 pm
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

In the case it may be impossible to create working redundant link. You have to change routerA an Catalyst settings to use OSPF (different VLAns for main and bakup link and new interface on routerA) or for STP link you have to be sure the Catalysts ports 2 a 3 use STP (and you may require to define ...
by jagowan
Thu Aug 02, 2007 1:25 pm
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

Use no bonding. Configure the devices so there will be 2 transparent links between the Catalyst and MT router B. Then try to use STP (Spanning Tree protocol). Better way is to change the topology to have a cisco switch on each side and use RSTP (Rapid STP - much faster convergence = few seconds ver...
by jagowan
Thu Aug 02, 2007 1:20 pm
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

1) Bonding requires two device to work.
2) What is the problem with routing configuration for ether1-intel, ether2-onboard addresses ?
1) Yes I know
2) We just have single ip addres for WAN (directly to Router A) 192.168.0.2/30
by jagowan
Thu Aug 02, 2007 1:02 pm
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

I'm not sure this is correct configuration or not, i'm just looking for failover with 2 lokal link shown in picture and i found "bonding" documentation in Google. So, i want to try "bonding" methode in my Mikrotik Router. As my subject, i want to know right configuration. Maybe i'm wrong, but i have...
by jagowan
Thu Aug 02, 2007 12:48 pm
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

No, I'm not asking about router interface, but I'm asking for the second device that terminates bonding interface on the other end (Is it switch ?).
Hmmm... i think switch
by jagowan
Thu Aug 02, 2007 12:38 pm
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

What is your second device for the bonding ? [admin@MikroTik] > /interface bonding print Flags: X - disabled, R - running 0 R name="bonding1" mtu=1500 mac-address=00:04:AC:36:4B:5B arp=enabled slaves=ether1-intel,ether2-onboard mode=balance-xor primary=none link-monitoring=mii-type2 arp-interval=10...
by jagowan
Thu Aug 02, 2007 10:04 am
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

Hmm, bonding can't used for this scenario ?
by jagowan
Thu Aug 02, 2007 9:10 am
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

How do you use bonding (together with the switch) ? very easy configuration is the following, main gateway to Ether2 and check-gateway=ping, secondary gateway to Ether1 address and distance=2. If I'm not mistaken switching should occur after 5/6 unsuccessfull pings (as main gateway will be disabled...
by jagowan
Thu Aug 02, 2007 8:59 am
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

we just want to use secondary link (wireless) in emergency only, not for balanced trafic, this day i have configure my Mikrotik Router B with bonding and fail over link can working properly, but.... i can't see the fix delay for switching from primary to secondary link, this is about 1sec until 40se...
by jagowan
Thu Aug 02, 2007 8:45 am
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

I think routing is goint to be more easy configuration scenario to accomplish, as router A is Cisco.
Admin of Router A just give me instruction about unplug and plug the ethernet connector from 2 my local link to their catalist port that have same vlan group.
by jagowan
Thu Aug 02, 2007 8:32 am
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

Re: how to make failover with bonding?

Could you give information about connection between RouterA (I assume MikroTik) and Switch. Router A is Cisco Router with 1 fastethernet that connected to catalyst cisco manageable switch. Router A To Router B have 2 local link which have same vlan id in catalyst (id=10). I'm not exactly known abou...
by jagowan
Wed Aug 01, 2007 3:29 pm
Forum: General
Topic: how to make failover with bonding?
Replies: 25
Views: 3194

how to make failover with bonding?

I have 2 Router that connected with 2 local link. I want to make failover procedure using bonding methode on mikrotik Router B. My Question is : How to make this design working with using bonding methode. No routing. Secondary Link (wireless) used if Primary Link fail and back to Primary Link if Pri...
by jagowan
Thu Jul 26, 2007 1:56 pm
Forum: Scripting
Topic: ssh / telnet
Replies: 2
Views: 1122

Re: ssh / telnet

if i'm not worng, maybe it's mean in terminal mode. The command is /system ssh xxx.xxx.xxx.xxx user=username
by jagowan
Wed Jul 25, 2007 11:42 am
Forum: The Dude
Topic: Notifications
Replies: 4
Views: 2085

Re: Notifications

i have same probelms
by jagowan
Tue Jul 24, 2007 1:12 pm
Forum: Beginner Basics
Topic: Interface brigde problems!
Replies: 2
Views: 1182

Re: Interface brigde problems!

what kind of game that have problem?
by jagowan
Tue Jul 24, 2007 1:05 pm
Forum: General
Topic: Bridging EoIP & Ethernet - Kernel panic
Replies: 7
Views: 1241

Re: Bridging EoIP & Ethernet - Kernel panic

have you check the mac address each EoIP ? maybe there're have the same one.
by jagowan
Tue Jul 24, 2007 1:00 pm
Forum: General
Topic: VPN Server
Replies: 1
Views: 591

Re: VPN Server

I've VPN server at MT box and using local ip pool address for remote and never using proxy-arp. It work fine for me to make vpn access from out there to reach my private network.
by jagowan
Tue Jul 24, 2007 12:34 pm
Forum: Beginner Basics
Topic: how to block porn sites
Replies: 7
Views: 13491

Re: how to block porn sites

For basic blocking by name, use the OpenDNS dns service. For hotspot clients set it in the router's DNS client. For Std access, use it in DHCP (hand it out).. Place a block on remote DNS requests... This is an about 80% fix, as access by IP is still not blocked. A cool feature would be a reverse DN...
by jagowan
Mon Jun 04, 2007 12:46 pm
Forum: General
Topic: Virtual server with two WAN
Replies: 2
Views: 773

Re: Virtual server with two WAN

use redirect port if your webserver using private ip, and it's normaly done without any advanced configuration if your webserver using public ip.
by jagowan
Mon May 21, 2007 1:11 pm
Forum: Wireless Networking
Topic: Hotspot on a virtual AP
Replies: 7
Views: 2995

make sure from MT have valid ip DNS where can resolve any domains on the world
by jagowan
Thu Apr 26, 2007 11:28 am
Forum: Wireless Networking
Topic: Trouble with H323
Replies: 2
Views: 1217

Trouble with H323

I have RB112 + CM9 with 15dbi Omni AP mode work on 2,4Ghz installed on my network. Everything functioned well, but one day a problem occured when one of my cutomers is doing/having a video teleconference by using H.323 protocol. The problem is that my MT is oftenly automatically restarting during ma...