Community discussions

Search found 255 matches

by ilius168
Thu Nov 01, 2012 10:20 am
Forum: Wireless Networking
Topic: Omnitik + RB411 Reboots when SXT connected using station-wds
Replies: 1
Views: 664

Omnitik + RB411 Reboots when SXT connected using station-wds

greetings all, we have the following setup with 411+ omnitik + SXT it seems to us something might have caused loops, where Rb411 reboots everytime SXT was connected using station-wds mode. (RB411 act as backbone) we have other similar setups using rb433Ah and rb411, also rb411 and rb411AR, all of th...
by ilius168
Tue Feb 21, 2012 6:03 am
Forum: RouterBOARD hardware
Topic: Router Board repair
Replies: 49
Views: 15654

Re: Router Board repair

Hi
It would be nice if someone can post it on sites like rapidshare or other.

Thanks
by ilius168
Sun Feb 19, 2012 4:14 am
Forum: General
Topic: Address List over 30,000 lines possible?
Replies: 1
Views: 397

Re: Address List over 30,000 lines possible?

aaah, got it...

/import filename.rsc

Done :D

Problem Solved...
by ilius168
Sun Feb 19, 2012 4:00 am
Forum: General
Topic: Address List over 30,000 lines possible?
Replies: 1
Views: 397

Address List over 30,000 lines possible?

Hi all,
Just wondering if mikrotik will accept over 30,000 lines of address list (/ip firewall address list).
i have no success doing this, winbox always disconnect when the address lists were pasted.

Got the rsc files would it help?

Tried on RB1100, RB 1000, and x86 , ROS v5.13.

Thanks
by ilius168
Wed Jan 25, 2012 2:55 am
Forum: General
Topic: v5.12 released
Replies: 144
Views: 25444

Re: v5.12 released

Hi, IPv6 works fine with reply-only on the bridge interface but now IPv4 don't work. Seems like it does not reply to ARP requests. I have not done a wireshark yet... same problem here with x86... big headache until i realized what the problem was Dido..RB1100 & RB1000 got the same ARP problem..
by ilius168
Mon Jan 02, 2012 5:51 pm
Forum: Wireless Networking
Topic: Groove 2.4ghz
Replies: 30
Views: 6506

Re: Groove 2.4ghz

patiently waiting....
by ilius168
Wed Dec 07, 2011 3:08 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26782

Re: RB750UP questions/suggestions

Woohoooo, finally available.....

Wonder when it will get here....
by ilius168
Wed Nov 30, 2011 8:30 am
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 42305

Re: RouterOS v5.9 released

- Locked up RB 750GL - unable to remote to the router.

- Lights up blinking on all ethernet ports.

- unable to reset

Ready to dismantle the Router and to be sent for RMA :-(
by ilius168
Sun Nov 06, 2011 9:29 am
Forum: Wireless Networking
Topic: 5km - Groove 5Hn - What is the expected throughput?
Replies: 12
Views: 7364

Re: 5km - Groove 5Hn - What is the expected throughput?

I have a link by 29.5 db parabolic antenna and -58dbm signal AP-station bridge Nstreme and Nv2 are active but I have not both side bandwidth stable! I have in one way 30-40mb and both 15/3 Mbps but I need 30mb full dulplex in both side please help me providing more info like distance, band, ccq, si...
by ilius168
Sun Nov 06, 2011 9:25 am
Forum: Wireless Networking
Topic: 5km - Groove 5Hn - What is the expected throughput?
Replies: 12
Views: 7364

Re: 5km - Groove 5Hn - What is the expected throughput?

Hi there,

Is it a real 29DBi Antenna?
for both side?

Regards
it's kbt 30dbi 5Ghz Grid on both side :)
by ilius168
Sun Nov 06, 2011 1:29 am
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 87510

Re: RouterOS v5.8 released

*) snmp - fixed problem where some rows were missed
in a few tables when walking them;

This one is also not fixed yet. Simple queues do not show up correctly in snmp walk.

+1

*sigh* not upgrading our cores still using 4.17
by ilius168
Tue Oct 25, 2011 3:45 am
Forum: RouterBOARD hardware
Topic: RouterBOARD Groove
Replies: 96
Views: 23853

Re: RouterBOARD Groove

yeah, after align antenna I have -53/-53 ccq + - 100%.. BT test groove-groove 97mbps Receive / 97mbps send....of coutre Nstreme best fit 3999 . Now I have a question, can groove generate more data? over 97mbps? because it stops on 97mbps....ccq is still 100%, ping 1-10ms where is the problem? 8) ni...
by ilius168
Sun Oct 23, 2011 12:10 am
Forum: RouterBOARD hardware
Topic: RouterBOARD Groove
Replies: 96
Views: 23853

Re: RouterBOARD Groove

why not to use 802.11n? more data at same channel width. because, there are currently many sites that already on turbo mode and all of their clients are turbo enabled (not supporting 802.11n). hmm seems like we to have to stick with Rb411 and R52/R52H .... and hoping they are not discontinued very ...
by ilius168
Wed Oct 19, 2011 4:38 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD Groove
Replies: 96
Views: 23853

Re: RouterBOARD Groove

choose 20/40Mhz on AP device. or did you mean 802.11G ? 2,4G?
yes any 802.11G, 2.4Ghgz or 5Ghz, ie:

N device to connecto to an AP with 802.11G (40Mhz or g-turbo)
by ilius168
Sun Oct 16, 2011 2:03 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD Groove
Replies: 96
Views: 23853

Re: RouterBOARD Groove

Uhm, is there anyway to make N devices to work with 40Mhz (G-Turbo) band?
by ilius168
Fri Oct 07, 2011 6:43 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

Hi Normis,
Would it be possible to send this unit back to MT to get it fixed?
Will pay for it, rather than having a new RB1000 sitting here doing nothing...

Cheers..
by ilius168
Fri Oct 07, 2011 6:41 am
Forum: RouterBOARD hardware
Topic: RB600 burnt out...
Replies: 14
Views: 2094

Re: RB600 burnt out...

Looks like your RB600 is now an RB411. :twisted:
or more like RB414G without POE :mrgreen:
by ilius168
Tue Oct 04, 2011 5:57 pm
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

i really hope this particular 'seller' had a chance flipping thru this topic.
we're sick of contacting them already.
by ilius168
Mon Oct 03, 2011 6:07 pm
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

any update on this issue sir normis?
by ilius168
Fri Sep 30, 2011 10:55 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help


are you sure you purchased new units, not used/refurbished ?
YES! I paid for new units @ full price!

All other RB1000u units working fine, I still got one unit for own use up and running without problem.
by ilius168
Fri Sep 30, 2011 10:52 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

It should be about 2008, please check this ticket to support. December 2008 RE: [Ticket#2008122266000067] RB 1000u not booting April 2009 RE: [Ticket#2009042266000133] RB 1000u still not u [...] followed by: August 2010 RE: [Ticket#2010081066000093] Please confirm our RB 1000 units on RMA since last...
by ilius168
Fri Sep 30, 2011 10:33 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

Dear Normis,
Both units were only plugged in, not even set, i didn't even hear the first beep since arrival.

Cheers!
by ilius168
Fri Sep 30, 2011 10:23 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

just fyi, we've given up with this particular supplier, it's all regarding RMA and SHIPMENT problems.

I just brought this up thought there might be someone who has the exact same problem, although it's awhile ago.
by ilius168
Fri Sep 30, 2011 10:21 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

well it's DOA when arrived to us.

and this 195B01FDCD57/840 is the replace unit for it.

Tell me what happened there?
by ilius168
Fri Sep 30, 2011 9:54 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

the first DOA unit is:

S/N: 195B01FD2A6B/840
MAC: 00:0C:42:20:72:DC - DF
by ilius168
Fri Sep 30, 2011 9:49 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

Re: RB1000 - DOA need help

Hi normis,
i haven't even used it, just plugged in and the blue light just lit up no booting whatsoever.
and yes sent back new units just the same.

the serial number is: 195B01FDCD57/840
MAC: 00:0C:42:20:96:E0 - E3

this should be in support email too sometime ago.

thanks for responding.

Cheers!
by ilius168
Fri Sep 30, 2011 8:04 am
Forum: RouterBOARD hardware
Topic: RB1000 - DOA need help
Replies: 15
Views: 1940

RB1000 - DOA need help

Hi guys, Just wondering if someone can help here. I have a RB1000, no respond when plugged in, just blue light, no beep nothing else. Tried new RAM, no improvement. Can't do netinstall, no respond with hyperterminal. Actually this unit was DOS (Dead on Arrival) since a while ago, being sent back to ...
by ilius168
Wed Sep 14, 2011 7:27 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD Groove
Replies: 96
Views: 23853

Re: RouterBOARD Groove

groove has 100MBps ethernet interface, so, you can saturate that, and then still have some upload left (25MBps). i can never reach 100Mbps in my setups, even at very close range < 2km, good clean area (no noise), max i get is 80mbps (oneway)TCP, 95Mbps UDP (oneway), once i have it running on both, ...
by ilius168
Wed Sep 14, 2011 7:11 pm
Forum: General
Topic: SNMP for Second Disk Usage
Replies: 0
Views: 426

SNMP for Second Disk Usage

Please make SNMP available for reading second disk usage.

+ current version (since 5.1) unable to capture Disk Usage , Memory Usage using MRTG or CACTI
by ilius168
Wed Sep 14, 2011 7:02 pm
Forum: Wireless Networking
Topic: groove A5hn as access point
Replies: 15
Views: 3645

Re: groove A5hn as access point

i believe the number of users stated on license levels are about the actual user (like hotspot, pppoe etc)
not the hardware user(device) limiting .

level4=20
level5=200
level6=unlimited
by ilius168
Thu Sep 08, 2011 5:21 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26782

Re: RB750UP questions/suggestions

Doh!!!
(like homer simpson said.... :( )
by ilius168
Wed Sep 07, 2011 10:11 am
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26782

Re: RB750UP questions/suggestions

It's September.. any updates (launchdate) on RB 750UP yet? :D
by ilius168
Thu Aug 25, 2011 9:00 am
Forum: Wireless Networking
Topic: RB411AH + R52Hn >< RB711-5Hn
Replies: 3
Views: 771

Re: RB411AH + R52Hn >< RB711-5Hn

Ok, but regardless the price & power, what about its tcp/udp performance.
Should we expect full 100Mbps tcp, if we get the full 200Mbps wireless connection?

thx Normis.
by ilius168
Thu Aug 25, 2011 7:33 am
Forum: Wireless Networking
Topic: RB411AH + R52Hn >< RB711-5Hn
Replies: 3
Views: 771

RB411AH + R52Hn >< RB711-5Hn

Hi,
Just wondering would 711-5Hn be better perform than RB411AH + R52Hn.

Doesn't tell much looking at the info and test result except for the CPU power of each.

http://routerboard.com/RB711-5Hn

http://routerboard.com/RB411AH


Thanks.
by ilius168
Wed Aug 24, 2011 2:22 am
Forum: Wireless Networking
Topic: 5km - Groove 5Hn - What is the expected throughput?
Replies: 12
Views: 7364

Re: 5km - Groove 5Hn - What is the expected throughput?

That's lower than I'd expect from a direct ethernet connection. You using half-duplex for some reason? The test were done one direction. Ethernet is set to 10/100mbps full duplex. It's definitely bottleneck-ed by the cable length (or even the quality of the RJ45). Tested again using factory made UT...
by ilius168
Tue Aug 23, 2011 5:22 pm
Forum: Wireless Networking
Topic: 5km - Groove 5Hn - What is the expected throughput?
Replies: 12
Views: 7364

Re: 5km - Groove 5Hn - What is the expected throughput?

Back with test results: Scheme 1: PC to RB1100 (Distance 5km but reported as 7km by Groove) PC-> GROOVE-AP -->><< --- GROOVE-ST <- RB1100 TCP: RX: 67Mbps TX: 34Mbps UDP: RX: 95.8Mbps TX: 37Mbps Groove CPU < 20% RB1100 CPU < 6% Scheme 2: Ethernet Test Cable Length 40m PC-> GROOVE-AP TCP: RX: 68Mbps T...
by ilius168
Tue Aug 23, 2011 4:37 pm
Forum: Wireless Networking
Topic: 5km - Groove 5Hn - What is the expected throughput?
Replies: 12
Views: 7364

Re: 5km - Groove 5Hn - What is the expected throughput?

Hi Uldis,
The units are running ROS v5.6.
It's WDS-Bridge mode.

Will try advance with fixed data rate, report back soon.

Thanks!
by ilius168
Sun Aug 21, 2011 6:17 am
Forum: Wireless Networking
Topic: 5km - Groove 5Hn - What is the expected throughput?
Replies: 12
Views: 7364

5km - Groove 5Hn - What is the expected throughput?

Hi, I have this 5km test link using Groove 5Hn on both side, there are not much interference from either side. The most i'm getting out of this link were 55mbps TCP and 88Mbps UDP (one direction) Comparing to previous setup using 5Ghz - Turbo mode, R52H i can get similar result of 55mbps TCP and 60M...
by ilius168
Mon May 09, 2011 5:09 pm
Forum: General
Topic: SNMP problem after 5.2 upgrade
Replies: 19
Views: 7620

Re: SNMP problem after 5.2 upgrade

reported about snmp since 5.0, snmp v1 doesn't work but snmp v2 does. some other snmp such as available disk space not working neither in both version........
BUGS??
by ilius168
Tue Apr 12, 2011 2:54 am
Forum: Wireless Networking
Topic: nstreme dual - nv2?
Replies: 14
Views: 5525

Re: nstreme dual - nv2?

@WirelessRudy
Yes everything is clear!
Big thumbs up for the great explanation thank you.
by ilius168
Sun Apr 10, 2011 4:23 am
Forum: Wireless Networking
Topic: nstreme dual - nv2?
Replies: 14
Views: 5525

Re: nstreme dual - nv2?

....This last has at least all the advantages you look for in nstreme-dual but with only one radio card.
Does it mean NV2 only uses 1 polarity antenna, while i see many TDMA feature enabled devices use dual polarity antenna that use 2 radio cards.
by ilius168
Sat Apr 09, 2011 8:39 am
Forum: General
Topic: Groove, Omnitik and new products
Replies: 22
Views: 6844

Re: Groove, Omnitik and new products

What is the power source for RB 750UP?

what if a device such as RB 800 which needs 48V?
Will it support 802.3af in the future?
by ilius168
Tue Mar 29, 2011 2:35 am
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14262

Re: v5rc11 is out!

snmp still not working correctly.
using v5.11, snmp vers1
by ilius168
Sun Jan 30, 2011 11:22 am
Forum: General
Topic: Strange Winbox behaviour in ms windows
Replies: 2
Views: 495

Re: Strange Winbox behaviour in ms windows

Thanks... yet still no solution... it could be the netbook itself, but strangely, it's only happen to some routers.....
by ilius168
Sun Jan 30, 2011 10:26 am
Forum: General
Topic: Strange Winbox behaviour in ms windows
Replies: 2
Views: 495

Strange Winbox behaviour in ms windows

Hi, Just wondering if anyone ever experience this: Winbox maximized, but other inner windows remains the same and all other buttons on the top of the status bar are missing. Tried using newer version winbox, clearing cache and roaming files, even reformated my windows xp doesn't seem to help. It onl...
by ilius168
Thu Apr 22, 2010 4:57 am
Forum: General
Topic: 4.6 and virtual AP. Problems in Winbox.
Replies: 14
Views: 3519

Re: 4.6 and virtual AP. Problems in Winbox.

ROS v4.7 VAP interface still buggy..... waiting for fixes in v4.8....
by ilius168
Thu Apr 15, 2010 2:35 pm
Forum: General
Topic: Webproxy doesn't HIT
Replies: 7
Views: 4493

Re: Webproxy doesn't HIT

Ah-ha!!
Found the problem....

the WAN Ip address has to be excluded in src-address..
 1   chain=dstnat action=redirect to-ports=8088 protocol=tcp 
     src-address=!10.21.0.136/30 dst-port=80 
Never done this in previous proxy setting, is this a new feature??

:)
by ilius168
Thu Apr 15, 2010 2:30 pm
Forum: General
Topic: Webproxy doesn't HIT
Replies: 7
Views: 4493

Re: Webproxy doesn't HIT

yes. there are packets. But for some reason the proxy doesn't hits, when using redirecting (transparent-proxy).

Yep, cache on disk, is set :)
by ilius168
Thu Apr 15, 2010 1:17 pm
Forum: General
Topic: Webproxy doesn't HIT
Replies: 7
Views: 4493

Re: Webproxy doesn't HIT

Just found out it works, when it's used as non transparent proxy....
Wonder what's wrong with the settings.
by ilius168
Thu Apr 15, 2010 12:53 pm
Forum: General
Topic: Webproxy doesn't HIT
Replies: 7
Views: 4493

Webproxy doesn't HIT

Hi I have a mt setup for proxy, pretty much standard, NAT, dst-nat, and enable web-proxy. But i see no hit in the status, and browsing is rather slow, compare to no proxy. No changes to size of disk space. Any idea? PS: Running ROS v.4.6 on x86Machine [admin@MikroTik] > /ip fire nat pri Flags: X - d...
by ilius168
Fri Apr 02, 2010 3:58 pm
Forum: General
Topic: ROS v 5.0beta1, CPU@100%
Replies: 3
Views: 1213

Re: ROS v 5.0beta1, CPU@100%

done! reinstall 4.5 via netinstall, everyth back to normal... phew. 8)

thanks roc-noc
by ilius168
Fri Apr 02, 2010 2:07 am
Forum: General
Topic: ROS v 5.0beta1, CPU@100%
Replies: 3
Views: 1213

Re: ROS v 5.0beta1, CPU@100%

Oops, downgraded to 4.6 cpu remains 100%... help!!
by ilius168
Thu Apr 01, 2010 11:27 pm
Forum: General
Topic: ROS v 5.0beta1, CPU@100%
Replies: 3
Views: 1213

ROS v 5.0beta1, CPU@100%

Hi just had a RB750 tested running v5.0beta1 and have this result: cpu running at 100% since upgrade, everything becomes slow, latency hits 2digit, and 0 traffic when testing were being done, while none of this happens on 4.6. Resource the first 57sec: uptime: 57s version: "5.0beta1" free-memory: 10...
by ilius168
Fri Jan 29, 2010 11:51 am
Forum: RouterBOARD hardware
Topic: [help]RB-411 restart
Replies: 4
Views: 903

Re: [help]RB-411 restart

sounds like there is a loop somewhere
by ilius168
Fri Jan 29, 2010 11:41 am
Forum: RouterBOARD hardware
Topic: How to configure the onboard SIM card 3G (RB411U) ?
Replies: 39
Views: 35014

Re: How to configure the onboard SIM card 3G (RB411U) ?

Did you read what you quoted from my post? :)
yes i read it and it is much clearer. thank you!
by ilius168
Fri Jan 29, 2010 11:25 am
Forum: RouterBOARD hardware
Topic: How to configure the onboard SIM card 3G (RB411U) ?
Replies: 39
Views: 35014

Re: How to configure the onboard SIM card 3G (RB411U) ?

NO! two ways miniPCI-e + SIM or USB. SIM card slot won't do anything alone, you need modem! Normis, so what is the function of sim slot? stated in http://routerboard.com/index.php?showProduct=46 RouterBOARD 411U with Atheros 300Mhz CPU, 32MB RAM, one LAN, one MiniPCI, one miniPCI express (for 3G), ...
by ilius168
Fri Jan 22, 2010 2:47 pm
Forum: RouterBOARD hardware
Topic: RB 750/G with ROS v.3.31?
Replies: 4
Views: 1777

Re: RB 750/G with ROS v.3.31?

done!

Upgraded to ROS v4.5
Works like charm!!
by ilius168
Mon Jan 18, 2010 12:49 pm
Forum: RouterBOARD hardware
Topic: New RB816 !
Replies: 20
Views: 6474

Re: New RB816 !

Have to agree with "andreacoppini",

I'd prefer more Ports for RB 1000U, or the daughter board made to fit in a 1U casing, using interface / data cable.

RB 816 looks abit bulky to fit in any network server condition.
(While RB 1000u too empty inside the casing :D)

That's only my opinion..
by ilius168
Mon Jan 18, 2010 12:38 pm
Forum: RouterBOARD hardware
Topic: RB 750/G with ROS v.3.31?
Replies: 4
Views: 1777

RB 750/G with ROS v.3.31?

Hi, i found the RB 750 & 750G are preloaded with ROS v3.31, is that safe to upgrade? Yes, it is preconfigured with some- ip dhcp and switches. Maybe the reason. Is it safe to upgrade to v4? (as i see many complains regarding RB750 upgrades to v4) What happen if upgrade failed and wanting to return t...
by ilius168
Fri Jan 08, 2010 6:18 am
Forum: General
Topic: RouterOS License and v4 questions
Replies: 116
Views: 48056

Re: RouterOS License and v4 questions

just sharing some similar problems... i Have a RB 1000u, upgraded from 4.2 to 4.3, license updated, but it gone crazy, license turns to level 0 and expiring in 23 hours. tried updating the key always failed, always reported invalid key. Until the unit is hard rebooted (Only hard reboot!), will bring...
by ilius168
Thu Jan 07, 2010 4:47 am
Forum: General
Topic: Iprovements In WinBox I Would Like To See...
Replies: 17
Views: 4409

Re: Iprovements In WinBox I Would Like To See...

Another quick one to add to the list, when I use the backup command, please backup the Winbox screen arrangement too so I don't have to start rearranging them again when I restore. 7. Have a user configured default layout that can be transported from one RouterBoard to another without having to rec...
by ilius168
Thu Dec 31, 2009 6:29 pm
Forum: General
Topic: New firewall matcher PCC
Replies: 298
Views: 73474

Re: New firewall matcher PCC

Hi, I've been using nth & pcc for loadbalancing, pretty much the same config as provided in wiki. Both work well except this, traffic seems to prioritized to the default gateway, this happens using nth and/or pcc configuration. Is this normal or is there anything that i've missed? Using ROS v4.4 (th...
by ilius168
Thu Dec 31, 2009 9:15 am
Forum: General
Topic: ROUTER HAS NO SOFTWARE KEY
Replies: 4
Views: 1396

Re: ROUTER HAS NO SOFTWARE KEY

had exactly the same problem with 1 RB 433AH and 1 RB 1000u, contacted support, rb433ah fixed with new software key given, but not with the RB 1000u, problem: license expiring within 23+ hours, had to hard reboot (soft reboot won't reboot at all) the unit then it went expiring again and again. upgra...
by ilius168
Fri Sep 11, 2009 6:08 pm
Forum: Wireless Networking
Topic: How to improve wireless ping time with Nstreme enable?
Replies: 10
Views: 2623

Re: How to improve wireless ping time with Nstreme enable?

try use wireless-test package.
I believe it's been discussed somewhere....

Hope this help.
by ilius168
Tue Jul 28, 2009 5:14 pm
Forum: Wireless Networking
Topic: 2.5Ghz interfered with 2.2Ghz ?
Replies: 6
Views: 931

Re: 2.5Ghz interfered with 2.2Ghz ?

uhm.... will try that idea....
by ilius168
Tue Jul 28, 2009 9:19 am
Forum: Wireless Networking
Topic: 2.5Ghz interfered with 2.2Ghz ?
Replies: 6
Views: 931

Re: 2.5Ghz interfered with 2.2Ghz ?

That was according to them.
They did checked with spectrum analyzer.

Did Mikrotik, beforehand, tested all mpci, R52, R52H etc, that the frequency produced is actually true as it is specified (or set) in RBs?
by ilius168
Tue Jul 28, 2009 4:14 am
Forum: Wireless Networking
Topic: 2.5Ghz interfered with 2.2Ghz ?
Replies: 6
Views: 931

2.5Ghz interfered with 2.2Ghz ?

Dear all, We are running link on that freq from 2,269Mhz to 2,389 (using superchannel of course), with RB 411A + R52 default TX Power. Few days ago we were visited by a satellite provider authority saying that we are interfering their licensed frequency operating at 2,500-2525Mhz. (One Way Receiver)...
by ilius168
Tue Jun 23, 2009 2:52 pm
Forum: General
Topic: [3.25][webbox]running bug
Replies: 8
Views: 1544

Re: [3.25][webbox]running bug ++

Dear Mikrotik, There seem to be some seriuos bugs in v3.25 Brigde setting & wireless interface settings were suddenly gone, back to default. Other settings such as ip address & routes are still there. Happen to us twice of those upgraded RB 411A and RB 493AH. We've upgraded most of our RB somewhere ...
by ilius168
Sun Jun 21, 2009 8:23 am
Forum: Wireless Networking
Topic: why is N-Stream slow???
Replies: 4
Views: 980

Re: why is N-Stream slow???

tried using wirelest-test package?
by ilius168
Sun Jun 21, 2009 8:20 am
Forum: Wireless Networking
Topic: Two antennas on one mPCI, how?
Replies: 2
Views: 648

Re: Two antennas on one mPCI, how?

OK. Thanks
by ilius168
Sun Jun 21, 2009 5:58 am
Forum: Wireless Networking
Topic: Two antennas on one mPCI, how?
Replies: 2
Views: 648

Two antennas on one mPCI, how?

Hi all, Is is possible to do this on RBs: 1 wireless mpci (such as R52 or R52H and others) which has 2 uFL connector hooked up to two antennas? (for eg: one mPCI for 2 sectoral antennas). From wireless interface we can only see these options: /interface wireless> set wlan_NOC antenna-mode= ant-a ant...
by ilius168
Sun Jun 21, 2009 5:47 am
Forum: RouterBOARD hardware
Topic: Graphs don't store in RBs
Replies: 3
Views: 618

Graphs don't store in RBs

Hi all, I'm having trouble getting graphs stored on disk even though "store on disk" has been enabled. Everything went blank after power off (NOT REBOOT). Thanks Flags: X - disabled # INTERFACE ALLOW-ADDRESS STORE-ON-DISK 0 all 0.0.0.0/0 yes
by ilius168
Sun Jun 21, 2009 5:43 am
Forum: RouterBOARD hardware
Topic: RouterBoard in CNC-Milled aluminium case
Replies: 15
Views: 2783

Re: RouterBoard in CNC-Milled aluminium case

Looks great.
Anymore details on those boxes, such as size, weight, etc (not to forget about price of course :) ) though, preferably in english. Thanks.
by ilius168
Sun Jun 21, 2009 5:40 am
Forum: RouterBOARD hardware
Topic: RB-433A
Replies: 4
Views: 908

Re: RB-433A

Some configuration here would be more helpful...
by ilius168
Thu Jun 18, 2009 4:53 pm
Forum: General
Topic: RouterOS Crashing / lock-up
Replies: 5
Views: 922

Re: RouterOS Crashing / lock-up

2 possibility in my experience: 1. RB 600 unstable, unit reboot unexpectedly, with log saying "caused by watchdog ... bla..bla.. (discussion about this available somewhere in the forum) 2. XR problematic cards, had a few XR5 and XR2 lock up our RBs, replaced with other mPCI the units works fine sinc...
by ilius168
Thu Jun 18, 2009 4:47 pm
Forum: General
Topic: [3.25][webbox]running bug
Replies: 8
Views: 1544

Re: [3.25][webbox]running bug

webbox seems to be buggy in 493AH as well,

i have several ether interfaces bridged together in different bridges, but i viewed (ONLY VIEWING) those interface using webbox, they turned all interface to bridge1.

regards
by ilius168
Thu Jun 18, 2009 4:32 pm
Forum: General
Topic: HP Proliant DL 360 G5
Replies: 12
Views: 3086

Re: HP Proliant DL 360 G5

yes it works perfectly on proliant D360 G5!!
by ilius168
Thu Jun 18, 2009 4:27 pm
Forum: General
Topic: RouterOS V3.25 released
Replies: 34
Views: 3817

Re: RouterOS V3.25 released

Hi, I've just loaded combined-package of 3.25 into RB433 and RB411, that I'm going to install in just a few days, but I've noticed a strange thing... After upgrading, there were only 4 packages installed: ipv6 (disabled), routerboard, routing-test (disabled) and system, nothing more, nothing less.....
by ilius168
Thu Jun 18, 2009 4:21 pm
Forum: General
Topic: 3.25 on RB433 and TCP Bandwidth Test (test unsupported)
Replies: 5
Views: 3995

Re: 3.25 on RB433 and TCP Bandwidth Test (test unsupported)

to use bandwitdh test, both units has to be the save ROS version, ie 3.25.
by ilius168
Mon Jun 15, 2009 5:48 pm
Forum: RouterBOARD hardware
Topic: ROS V3.25 out fix winbox menu problem !! GREAT!
Replies: 0
Views: 554

ROS V3.25 out fix winbox menu problem !! GREAT!

What's new in 3.25:

*) made WinBox work better on smaller screens;


*) WinBox menu is better organized, all sub-menus are sorted;

WELL DONE!!
Should have done this looong time ago....
by ilius168
Sun May 24, 2009 4:22 pm
Forum: RouterBOARD hardware
Topic: if you want to see my test .... rb433a + rb411a
Replies: 6
Views: 1271

Re: if you want to see my test .... rb433a + rb411a

HI Inox,
Is that real traffic or bandwidth test?

What is your cpu usage at that speed?

Regards
by ilius168
Sun May 24, 2009 4:07 pm
Forum: General
Topic: RouterOS V3.24 release
Replies: 26
Views: 2704

Re: RouterOS V3.24 release

ROS 3.24 link gone for download?
Or something wrong with the updates??
by ilius168
Sun May 24, 2009 3:52 pm
Forum: RouterBOARD hardware
Topic: RB493AH @ 800Mhz
Replies: 8
Views: 2146

Re: RB493AH @ 800Mhz

Mine never works running 800Mhz, most units tested, i had to press reset button to get it working again.

While 433AH @ 800Mhs performs just the same as 680Mhz. Some units even reboot itself or need hard reboot when running @ 800Mhz.
by ilius168
Mon Mar 30, 2009 2:29 am
Forum: RouterBOARD hardware
Topic: What is RB 750?
Replies: 1
Views: 7967

What is RB 750?

HI
Found on the changelog:
*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,
RB1000;
*) added '/interface ethernet print stats' command for RB450G and RB750;

Just wondering what is RB 750 and RB 616?

Cheers
by ilius168
Sun Feb 08, 2009 3:19 am
Forum: Wireless Networking
Topic: Nstreme test package
Replies: 119
Views: 33394

Re: Nstreme test package

Just want to report failure to run nstreme using wireless test package on RB 600.

Works fine and great on RB 411A, RB 411AH, RB 433, RB 433AH and RB 333.

Supout.rif file sent to support.

Thanks and great job guys!
by ilius168
Tue Feb 03, 2009 3:29 am
Forum: Wireless Networking
Topic: Nstreme test package
Replies: 119
Views: 33394

Re: Nstreme test package

Are these updates included in the latest ROS Version (3.20) ? Or do we still need to update the wireless-test package?
by ilius168
Sun Dec 28, 2008 3:43 am
Forum: General
Topic: Hotspot - If use change mac address
Replies: 1
Views: 399

Hotspot - If use change mac address

Hi, i'm running a hotspot server and I find that users are able to change their mac address on their os so that they are able to use the network resources via the free-trial feature.

Is there anyway to overcome this while having the free trial feature remains available?

thx
by ilius168
Mon Dec 22, 2008 6:40 am
Forum: RouterBOARD hardware
Topic: RB 1000U Not Booting
Replies: 4
Views: 775

Re: RB 1000U Not Booting

I've open the unit, nothing strange. DIP SWITCH showing 2-3 on ON posisiton. All screws are tight. Wiring Ok. 1 fan is running (normal) yes it is DOA, never even a single beep at the first opening, so never ran at all. Done netinstall many2 times, with no success. What do do?? Seems like RMA is the ...
by ilius168
Thu Dec 18, 2008 2:48 am
Forum: RouterBOARD hardware
Topic: 493AH set at 100MHz
Replies: 2
Views: 886

Re: 493AH set at 100MHz

I've tried overclocked to 800Mhz on RB 433AH and RB 493AH, and it locked up the RBs to not booting.... and had to do manual booting. If successfully overclocked, the units sometimes reboots not sure if it overheated or something else, and it returns the cpu clock to 680Mhz. So, i'd say 800Mhz is not...
by ilius168
Thu Dec 18, 2008 2:42 am
Forum: RouterBOARD hardware
Topic: RB 1000U Not Booting
Replies: 4
Views: 775

Re: RB 1000U Not Booting

Dear Normis, - the lights are up, as normal, meaning the power is up & supplied to the board. - nothing comes up on the serial interface. problem with my first rb 1000u was the power supply hooked up opposite way from the factory. tried netinstall didnot detect the RB at all. Anymore suggestion befo...
by ilius168
Tue Dec 16, 2008 1:19 pm
Forum: RouterBOARD hardware
Topic: RB 1000U Not Booting
Replies: 4
Views: 775

RB 1000U Not Booting

Hi, got an RB 1000u not booting. blue lights up, the eth lights up for 2 secs then off (normal), no beeping sound. What to do? tried netinstall.. but no luck. No suppout file, (not even booting into the system :( ) Thanks! PS: This is my 3rd RB 1000u, 2/3 not working, always need extra effort to get...
by ilius168
Sat Nov 29, 2008 1:56 am
Forum: RouterBOARD hardware
Topic: RB 433AH Micro SD Card - When will we be able to use this?
Replies: 21
Views: 11118

Re: RB 433AH Micro SD Card - When will we be able to use this?

problem dissapeared when the unit is rebooted, but not for long (few days).

tried 1 gb card, up time 2days with no errors, so shall i be suspecting a defect micro-sd? :D

will keep monitoring....
by ilius168
Tue Nov 25, 2008 10:36 am
Forum: RouterBOARD hardware
Topic: RB 433AH Micro SD Card - When will we be able to use this?
Replies: 21
Views: 11118

Re: RB 433AH Micro SD Card - When will we be able to use this?

the micro-sd card keepn on dissapearing on me.... :evil:
sometimes invalid
by ilius168
Fri Nov 21, 2008 5:52 am
Forum: General
Topic: WEB-PROXY, Std setting not working...
Replies: 0
Views: 542

WEB-PROXY, Std setting not working...

Hi, I'm trying running web-proxy on RB 433AH with internal disk (micro-sd), but having trouble, the web doesn't load at all, while loading very slowly when using proxy directly to the browser (non-transparent). Configuration all standard, enabling ip proxy, redirect port 80 traffic to proxy port (31...
by ilius168
Thu Nov 20, 2008 5:54 am
Forum: RouterBOARD hardware
Topic: RB 433AH Micro SD Card - When will we be able to use this?
Replies: 21
Views: 11118

Re: RB 433AH Micro SD Card - When will we be able to use this?

MY 433AH doesn't seem to recognise the microSD or is there something i have to do before using it? Done disk format but status remains invalid. Any suggestion? I'm running ROS 3.16 latest firmware, 4Gb SanDisk MicroSD. Thanks /store disk> pri Flags: S - system # NAME TOTAL-SPACE FREE-SPACE STATUS 0 ...
by ilius168
Tue Nov 18, 2008 3:17 am
Forum: General
Topic: Mikrotik + External Proxy
Replies: 6
Views: 1638

Re: Mikrotik + External Proxy

I have pretty much similar config to the setup but i used mangle-route mark instead of DST-NAT (it works both ways).

though I'm having trouble capturing the traffic from proxy using mangle rule + simple queues. :?
by ilius168
Sat Nov 15, 2008 4:34 pm
Forum: General
Topic: Reinstall via Burn ISO CD
Replies: 5
Views: 763

Re: Reinstall via Burn ISO CD

Simple question, but no one interest to answer it. Thanks similar questions being asked many times, that maybe why :P 1. Installing ROS via CD.ISO will not cause to loose SOFT-ID, unless you do low level format on the Disk (CF or HDD) 2. Reconfigure the box all over from beginning, will not change ...
by ilius168
Mon Oct 20, 2008 5:31 am
Forum: RouterBOARD hardware
Topic: ros 3.15 is out
Replies: 15
Views: 3046

Re: ros 3.15 is out

speed.jpg very cool speed with 3.15 - even more then the eths are built for on the rb532 ;-)) this showed at least as log as it took me to see it and make a screenshot ... it has slowed down again ;-( I think this has been buggy since 3.10, it happens especially when the unit is rebooted, last for ...
by ilius168
Fri Oct 17, 2008 2:57 am
Forum: RouterBOARD hardware
Topic: rb600 3xr2 1xr5
Replies: 5
Views: 1100

Re: rb600 3xr2 1xr5

sounds like another defect unit of RB 600's

http://forum.mikrotik.com/viewtopic.php?f=3&t=22265
by ilius168
Tue Oct 14, 2008 1:20 pm
Forum: RouterBOARD hardware
Topic: PANIC: HELP! MY RB 1000 doesn't reboot!
Replies: 2
Views: 871

Re: PANIC: HELP! MY RB 1000 doesn't reboot!

Check the output from console, perhaps you can reinstall RB1000 with netinstall.
thanks. It works now. by doing hard reset more than 6 times... :?
by ilius168
Tue Oct 14, 2008 7:12 am
Forum: RouterBOARD hardware
Topic: PANIC: HELP! MY RB 1000 doesn't reboot!
Replies: 2
Views: 871

PANIC: HELP! MY RB 1000 doesn't reboot!

HI all,
My RB doesn't reboot after power failure. It only beep once, the green light come up once then off as normal, the blue light is on.

Tried netinstall but didnot detect anything....

:panic mode on:
by ilius168
Sat Oct 11, 2008 4:57 am
Forum: RouterBOARD hardware
Topic: RB433AH DISK USAGE FULL?
Replies: 4
Views: 1299

Re: RB433AH DISK USAGE FULL?

Thx. But i finally reset the unit and it seems normal now. I did suspect the proxy stored something without my knowledge :D because i did use internal proxy with parent proxy, but disabled it has been disabled then. Here is the proxy setting from my backup /ip proxy set always-from-cache=no cache-ad...
by ilius168
Sun Oct 05, 2008 5:52 am
Forum: General
Topic: Ubuntu and Winbox
Replies: 14
Views: 7536

Re: Ubuntu and Winbox

="Montana"I have changed my computer to Ubuntu 8.04 desktop and have installed Wine 1.0 along with Winbox 2.2.13 Well every thing seem to get started but I cant connect. Winbox starts, I put in the address and it said it was connecting but it never does, it just times out. Mike had the same problem...
by ilius168
Sat Oct 04, 2008 11:47 am
Forum: RouterBOARD hardware
Topic: RB433AH DISK USAGE FULL?
Replies: 4
Views: 1299

RB433AH DISK USAGE FULL?

Hi. I have a RB 433AH for loadbalancing 4 upstream using mangle(nth) and mark routing(eth1). Also a route to proxy server (eth2). Distributing at ether3. It seems somehoe the disk usage adds up very quickly (to 100%), while cpu usage and memory usage are at its moderate (25% & 34kb). Is this conside...
by ilius168
Fri Sep 26, 2008 2:38 pm
Forum: General
Topic: WINBOX GUI need a bit of touch up
Replies: 29
Views: 3467

Re: WINBOX GUI need a bit of touch up

what kind of 'optimised' windows is that? 100MB installed?? :shock:

where do i get it?
by ilius168
Fri Sep 26, 2008 2:36 pm
Forum: RouterBOARD hardware
Topic: HOT RB411AH ??
Replies: 0
Views: 695

HOT RB411AH ??

Has anyone experienced a hot RB411AH? I'm testing a RB411AH indoor, standard setups for a wireless station mode and bridge. It rebooted itself once, when i checked, the heatsink was very hot to touch, even to the board. Is it normal? (this is my only one indoor RB411AH, the rest are outdoor, so neve...
by ilius168
Thu Sep 25, 2008 11:28 am
Forum: General
Topic: WINBOX GUI need a bit of touch up
Replies: 29
Views: 3467

Re: WINBOX GUI need a bit of touch up

i have two words for you.. Asus eeePC :)
don't mind me asking, which type of eeepc you are using? Thinking of getting one for myself, maybe the 4G series, but worried that it doesn't take windows xp on the little space (4GB).
Cheers :D
by ilius168
Tue Sep 23, 2008 2:28 pm
Forum: General
Topic: Where is the CHANGE_LOG file?
Replies: 3
Views: 955

Re: Where is the CHANGE_LOG file?

changelog.jpg
ow, i'm blind... :D

Thx!
by ilius168
Tue Sep 23, 2008 3:02 am
Forum: General
Topic: Proxy in ros 3.11 ?
Replies: 5
Views: 1459

Re: Proxy in ros 3.11 ?

did you contact support as recommended?
Yes, and i got responds, that i might have a bad hard drive, tried reformatting and did not fix.

The log appears to be random, once unit is rebooted, then it's gone for awhile and comes back for maybe 100lines then disappeared again.
by ilius168
Tue Sep 23, 2008 2:57 am
Forum: General
Topic: WINBOX GUI need a bit of touch up
Replies: 29
Views: 3467

Re: WINBOX GUI need a bit of touch up

exactly the problem i'm having with winbox.....
by ilius168
Tue Sep 23, 2008 2:54 am
Forum: General
Topic: Where is the CHANGE_LOG file?
Replies: 3
Views: 955

Where is the CHANGE_LOG file?

Hi, I want to see the changes of v.3.14 but couldnt find the change_log file anywhere. ANy idea? I'm having trouble with simple queues, whenever i mistakenly enter the parameters, simple queues simply not showing any traffic nor counter. but if it hits max then color still goes red (meaning, the sim...
by ilius168
Thu Sep 11, 2008 3:27 am
Forum: Wireless Networking
Topic: mini pci support for 411/411a
Replies: 5
Views: 1582

Re: mini pci support for 411/411a

A NEW QUESTION

1. current ROS version is 2.9.x shd i change it to 3.13 which one is better and more stable for point to multipoint connecttions.
doesn't RB 4xx already come with ROS v3.x??
I fine v.3.10 the most stable.
by ilius168
Wed Sep 10, 2008 3:02 am
Forum: Wireless Networking
Topic: unstable ping with nstream
Replies: 27
Views: 6998

Re: unstable ping with nstream

nice explanation, thank you!
by ilius168
Wed Sep 10, 2008 2:36 am
Forum: General
Topic: ssh & telnet
Replies: 2
Views: 616

Re: ssh & telnet

by ilius168
Wed Sep 10, 2008 1:15 am
Forum: General
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 12
Views: 1634

Re: Help Needed: Multiple WAN but 1 gateway

Don't be confused....read and understand. ;-)
reading.... ;)
by ilius168
Wed Sep 10, 2008 1:13 am
Forum: General
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 12
Views: 1634

Re: Help Needed: Multiple WAN but 1 gateway

gateway-state=reachable,unreachable This means ether4 is unreachable. Are you using check-gateway on that route ? It can't be blue otherwise that route isnt active in the first place. actually both were reachable, dunno why when this was copy pasted as unreachable then.... :-? 4 A S ;;; Modem 2 dst...
by ilius168
Tue Sep 09, 2008 10:40 am
Forum: General
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 12
Views: 1634

Re: Help Needed: Multiple WAN but 1 gateway

@ changeip I did try the gateway interface feature, assigned an interface to the gateway. But the mikrotik always by default choose the interface where the ip should belongs. say, i have this ip: 124.47.10.11/24 at interface ether1 and the gateway 124.47.10.1 (default) 124.47.10.21/24 at interface e...
by ilius168
Tue Sep 09, 2008 3:23 am
Forum: General
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 12
Views: 1634

Re: Help Needed: Multiple WAN but 1 gateway

unfortunately the wan IP address is assigned by the ISP automatically, so that we could not changed the ip. JFYI, these modems are provided by the same ISP, because of each modems are the same package plans (ie 4mbps each modem), they are set to go to 1 gateway (in this case: 125.47.10.1) It's meant...
by ilius168
Mon Sep 08, 2008 8:39 pm
Forum: General
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 12
Views: 1634

Re: Help Needed: Multiple WAN but 1 gateway

so an extra router is a must to get another set of ip to make it different from its original ip (network)?
by ilius168
Mon Sep 08, 2008 10:46 am
Forum: General
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 12
Views: 1634

Help Needed: Multiple WAN but 1 gateway

Following is the rough drawing of the network. http://img134.imageshack.us/img134/521/net1ob8.th.jpg traffic always go thru ether1 eventhough i set the gateway interface. note: it is now four modems with 1 same gateway, meaning i have to use 3 mini router to overcome the problems, which is pretty wa...
by ilius168
Fri Sep 05, 2008 11:10 am
Forum: Wireless Networking
Topic: unstable ping with nstream
Replies: 27
Views: 6998

Re: unstable ping with nstream

so is there anyway to overcome the latency problem when using nstreme?

cos' we have users that is all the time looking at the ping time and started complaining, but in fact the ping time doesn't always effect internet (cmiiw).
by ilius168
Thu Sep 04, 2008 4:00 am
Forum: General
Topic: Simple Queue Buggy in V3.13?
Replies: 1
Views: 623

Simple Queue Buggy in V3.13?

HI all, Anyone has experienced this: Whenever the limit in simple queue is set, the graphic showed no traffic, but the actual bandwidth is limited accordingly to the limit set in the queue until the router is rebooted. (it even not captured in MRTG) Running ROS v3.13 on RB 1000u. Same thing happenin...
by ilius168
Tue Aug 26, 2008 9:39 am
Forum: RouterBOARD hardware
Topic: R52 & R52H Power ?
Replies: 5
Views: 2418

Re: R52 & R52H Power ?

knew that
by ilius168
Tue Aug 26, 2008 7:26 am
Forum: RouterBOARD hardware
Topic: R52 & R52H Power ?
Replies: 5
Views: 2418

R52 & R52H Power ?

What is the actual power of R52 & R52H? When it is set to default, it stated max was 19dBm @ 1mbps to lowest, to 16dBm @ 54mbps. While on R52H max was 25dBm @ 1mbps to 17dBm @ 54mbps. Does that means the R52 max txpower @ 19 dBm which is around 80mW and R52H Max @ 25dbm (320mW) But somehow in most l...
by ilius168
Fri Aug 22, 2008 6:47 am
Forum: General
Topic: Proxy in ros 3.11 ?
Replies: 5
Views: 1459

Re: Proxy in ros 3.11 ?

any news regarding web proxy development? still getting the same error message here.... 10:44:08 web-proxy,error stat('/var/cache/7/da/7da1c4e6db16723e14f58b1acc8b4d09' ) failed: Input/output error 10:44:09 web-proxy,error stat('/var/cache/7/df/7df00207d7f7593e2b4cce20d9295641' ) failed: Input/outpu...
by ilius168
Thu Aug 14, 2008 11:07 am
Forum: General
Topic: v3.12 crashing on x86
Replies: 42
Views: 10260

Re: v3.12 crashing on x86

wew, it won't even work installing fresh from ISO to my CF, it finished installing all the stuff it needs then reboot, i only see Loading system with initrd Uncompressing Linux... Ok, booting the kernel that's it. Doing the same after reinstalling. the bug is getting bigger since 3.11 :D need a bett...
by ilius168
Wed Aug 06, 2008 7:15 pm
Forum: Wireless Networking
Topic: unstable ping with nstream
Replies: 27
Views: 6998

Re: unstable ping with nstream

Same here i have got a few RB411A connected using CM9 (and many other) cards. It seems like the latency gone unstable with nstreme enabled, from 1 digit to sometimes 3 digits, while it's stable at 1ms without. Though throughput is much higher with nstreme. Is there any setting i need with nstreme? A...
by ilius168
Thu Jul 24, 2008 3:51 am
Forum: General
Topic: Proxy in ros 3.11 ?
Replies: 5
Views: 1459

Proxy in ros 3.11 ?

Greetings, I have these messages on my x86 using ros 3.11. What does it means? No such messages when using ros 3.10. Thx ) failed: Value too large for defined data type 05:35:48 web-proxy,error stat('/var/cache/7/bf/7bffcca3723aec020e7272d34d8d20bc' ) failed: Value too large for defined data type 05...
by ilius168
Mon Jul 21, 2008 3:59 pm
Forum: RouterBOARD hardware
Topic: RB 1000u with 2 CF slots? where?
Replies: 2
Views: 922

Re: RB 1000u with 2 CF slots? where?

You need to open the rackmount case and unscrew the board from it and on the bottom you will see the second CF slot. ow so the one on the bottom will be permanent? would it be nice to have an sata/ide converter, so we can have a hdd inside the empty rackmount casing. or make a daughter board for ex...
by ilius168
Sun Jul 20, 2008 4:28 am
Forum: RouterBOARD hardware
Topic: RB 1000u with 2 CF slots? where?
Replies: 2
Views: 922

RB 1000u with 2 CF slots? where?

As the topic says,

where can i find the second CF slot for RB 1000u?
by ilius168
Fri Jul 18, 2008 1:57 am
Forum: General
Topic: Ros v3.x : WInbox question
Replies: 5
Views: 1734

Ros v3.x : WInbox question

Hi,
How to make columns to appear permanently in winbox?
So that it appears on winbox everytime it's started.

eg:
I want to show column Rx and Tx in simple queue but permanently.

Thanks!
by ilius168
Tue Jul 15, 2008 11:46 am
Forum: RouterBOARD hardware
Topic: RB 600A discontinued?
Replies: 3
Views: 917

Re: RB 600A discontinued?

I got info from our supplier, saying that RB 600A is not to be produced possibly until august, and might discontinue. :-/
---
by ilius168
Tue Jul 15, 2008 5:01 am
Forum: RouterBOARD hardware
Topic: RB 600A discontinued?
Replies: 3
Views: 917

RB 600A discontinued?

Heard that RB 600A is discontinuing?
Can someone from routerboard.com (mikrotik) confirm this? ??
Thanks.
by ilius168
Tue Jul 15, 2008 12:29 am
Forum: General
Topic: 3.11 "restore" erorr ?!
Replies: 9
Views: 2292

Re: 3.11 "restore" erorr ?!

I too got problems with v3.11:

1. the x86 machines get kernel panic message after rebooting form upgrade.
2. this script doesnt work in netwatch, while it works in ROS v3.10 and below
/ip route set [/ip route find comment "Route 2"]  disable=no
by ilius168
Wed Jul 09, 2008 7:27 am
Forum: The Dude
Topic: Permissions
Replies: 3
Views: 1960

what is the minimum rights for dude?

Just wondering if we can set a user with minimum right just for dude (monitoring) purposes. But what is the minimum rights? tried read (standard), the dude become stall.

:?
by ilius168
Tue Jul 08, 2008 11:55 am
Forum: The Dude
Topic: New to dude: username & password
Replies: 11
Views: 32223

Re: New to dude: username & password

Please excuse me for being dumb. I'm trying to use the dude client, set up a few server out of a sudden it seems crashed. (the scroll bar doesn't stop moving) and i had to do task kill via task manager. then restart the dude, but it keep on connecting and disconnecting until i ask for reset. PS: (On...
by ilius168
Tue Jul 08, 2008 9:56 am
Forum: The Dude
Topic: New to dude: username & password
Replies: 11
Views: 32223

Re: New to dude: username & password

yes i have installed dude3.08b, but couldn't see Users
by ilius168
Tue Jul 08, 2008 9:49 am
Forum: The Dude
Topic: New to dude: username & password
Replies: 11
Views: 32223

Re: New to dude: username & password

uhm... where to find Dude interface?
:)
by ilius168
Tue Jul 08, 2008 9:15 am
Forum: The Dude
Topic: New to dude: username & password
Replies: 11
Views: 32223

New to dude: username & password

Greetings all,
I've just added dude package into my ROS (v3.10) and new to using dude.
It ask for username and password when i entered: http://R_ipaddress/dude
i did and it just stays loading.....

Do i need to setup anything before to be able to access the dude webserver?

Thanks!
by ilius168
Tue Jun 24, 2008 3:06 am
Forum: RouterBOARD hardware
Topic: RB 44G gives problems??
Replies: 0
Views: 722

RB 44G gives problems??

Hi I have RB 44G installed on 1 of our router. It's doing something strange: 1. Router become frequently rebooted (30minutes average) 2. The traffic reading can reach >100Mbps even the real traffic was only 1-2Mbps. 3. DHCP Clients don't bound automatically, must do disable/enable trick on the inter...
by ilius168
Tue Jun 17, 2008 12:20 pm
Forum: RouterBOARD hardware
Topic: RB 411 one batch fail?????
Replies: 3
Views: 961

Re: RB 411 one batch fail?????

nothing happens when using serial cable. not sure if i did it wrongly.

I was using hyperterminal underwindows tried all popular baud rate. but no response neither....
by ilius168
Tue Jun 17, 2008 5:01 am
Forum: RouterBOARD hardware
Topic: RB 411 one batch fail?????
Replies: 3
Views: 961

Re: RB 411 one batch fail?????

Manage to get some up and running by using netinstall, but 4 units were still not booting. Although it beep but netinstall did not detect its existence.....

Still no reply from mikrotik yet....
by ilius168
Mon Jun 16, 2008 12:59 pm
Forum: RouterBOARD hardware
Topic: RB 411 one batch fail?????
Replies: 3
Views: 961

RB 411 one batch fail?????

HI, I have got one batch of RB 411 (10pcs), all could not reboot, both green & blue lights are up. These units were previously tested and upgraded ok. Tried netinstall, it took along time to install a npk file, ended up with "Installing failed" Sent email to support, but got no reply till today! Ple...
by ilius168
Fri Jun 13, 2008 4:03 pm
Forum: Wireless Networking
Topic: missing 'compression' in RB 433?
Replies: 3
Views: 1316

missing 'compression' in RB 433?

Has the compression feature in wireless been missing in RB 433?
by ilius168
Thu Jun 12, 2008 6:51 pm
Forum: Wireless Networking
Topic: Wireless FAQ
Replies: 68
Views: 58576

Re: Wireless FAQ

Nice one!! :D
by ilius168
Sun Jun 08, 2008 1:29 pm
Forum: General
Topic: DHCP Client blanks - no response
Replies: 3
Views: 786

Re: DHCP Client blanks - no response

:D
by ilius168
Sat Jun 07, 2008 11:49 am
Forum: General
Topic: DHCP Client blanks - no response
Replies: 3
Views: 786

Re: DHCP Client blanks - no response

anybody please.... it's annoying, that i have to restart the router to get the dhcp setting to appear (in winbox or telnet)......

i'm using RoS 3.10, with 3 dhcp-client setup.
by ilius168
Fri Jun 06, 2008 5:21 pm
Forum: General
Topic: DHCP Client blanks - no response
Replies: 3
Views: 786

DHCP Client blanks - no response

Hi I have 3 dhcp setup for 3 interfaces. I'm having trouble getting dhcp setup to appear in winbox nor in the terminal (like the ROS hang, but it's not), but it is fine when there are only 2 interfaces. is this mikrotik bugs? thought there's a fix in 3.10 *) fixed bug - DHCP server did not return DH...
by ilius168
Thu Jun 05, 2008 7:51 am
Forum: Scripting
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 2
Views: 862

Re: Help Needed: Multiple WAN but 1 gateway

wrong room, can someone move me please ... :oops:
by ilius168
Thu Jun 05, 2008 7:39 am
Forum: Scripting
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 2
Views: 862

Help Needed: Multiple WAN but 1 gateway

Hi All, I have 4 cablem modem that i want to feed into 1 router (mikrotik), all modem are DCHP mode. First two modems are fine, because they have different gateway, but when i feed the next modem, it's got the same gateway as the second modem, last modem has the same gateway as the first. I'm using ...
by ilius168
Thu Jun 05, 2008 3:41 am
Forum: RouterBOARD hardware
Topic: Upgrading old boards to 3.x
Replies: 11
Views: 1825

Re: Upgrading old boards to 3.x

Yes, make sure they are running 2.9.51 first before upgrading.

ow? why is that?
by ilius168
Wed Jun 04, 2008 7:28 am
Forum: RouterBOARD hardware
Topic: RB 1000U 12V? or 24v?
Replies: 3
Views: 1157

Re: RB 1000U 12V? or 24v?

wow

It works!

thanks!


But i wonder if mikrotik/routerboard were not testing it before deploy.....

hm....
by ilius168
Tue Jun 03, 2008 5:45 pm
Forum: RouterBOARD hardware
Topic: RB 1000U 12V? or 24v?
Replies: 3
Views: 1157

RB 1000U 12V? or 24v?

Hi all, Just got my first RB 1000u. nice packed unit. But it's doesn't fired up? WHen i checked it has a 12v-3A adaptor in it, measured it was correct. and did not turn on. then i switch to 24v 3A adaptor, it works. Is RB 1000u meant to use 12 v or 24v? It stated 12v on the website..... :-? Any comm...
by ilius168
Sun Jun 01, 2008 5:41 pm
Forum: General
Topic: Loadbalance: Dynamically?
Replies: 2
Views: 771

Loadbalance: Dynamically?

Hi all,


I'm currently do loadbalance using routing mark, just wondering if MT can do loadbalance dynamically? Like hardware loadbalancer.


It'd be nice if there's any directions or tips, thanks!
by ilius168
Fri May 23, 2008 5:31 pm
Forum: General
Topic: How to check/monitor Second Drive for Proxy
Replies: 2
Views: 608

Re: How to check/monitor Second Drive for Proxy

anybody with some answer?

multiple wan with one proxy anybody? :D
by ilius168
Fri May 23, 2008 2:04 pm
Forum: General
Topic: Mangle P2P traffic still not working
Replies: 5
Views: 989

Re: Mangle P2P traffic still not working

You should mangle first traffic that is running on known ports, like HTTP, MAIL etc. Then mangle all other traffic an make priroity. It's one way of doing. But isn't that there're too many ports that need to be marked (eg, gaming ports) and won't lots of mangle rules make the cpu works more? Thanks...
by ilius168
Fri May 23, 2008 2:01 pm
Forum: General
Topic: Mangle P2P traffic still not working
Replies: 5
Views: 989

Re: Mangle P2P traffic still not working

14 ;;; Mark P2P Traffic
chain=forward action=mark-connection new-connection-mark=P2P - Conn passthrough=yes
p2p=all-p2p

Make the chain=prerouting
Done that, not working neither...
by ilius168
Fri May 23, 2008 4:53 am
Forum: General
Topic: Mangle P2P traffic still not working
Replies: 5
Views: 989

Mangle P2P traffic still not working

HI all, I've been struggling with P2P traffic limiting, somehow some traffic were not trapped (mangled) why? When i do torch, there are alot of ports > 6000, most likely P2P. Checked with client, that they are using limewire. Using ROS v. 2.9.51 (not in hurry to move to v3 as yet:D) Thanks. here is ...
by ilius168
Wed May 21, 2008 6:11 pm
Forum: RouterBOARD hardware
Topic: RB 1000 Upgrade RAM to 1GB?
Replies: 8
Views: 2418

RB 1000 Upgrade RAM to 1GB?

HI
Can the SODIMM RAM on RB 1000 be upgraded to 1GB?

I'd appreciate any comments thx!
by ilius168
Tue May 20, 2008 6:26 am
Forum: General
Topic: WINBOX GUI need a bit of touch up
Replies: 29
Views: 3467

Re: WINBOX GUI need a bit of touch up

I expect WINBOX should not force user to use big screen right? imagine you have a space in the rack that's only fit a 14inch monitor if everyone have to fully learned command line, the what's the use of winbox? .....come on..... :P it should be easily fixed, just move the submenu to the centre of th...
by ilius168
Tue May 20, 2008 4:58 am
Forum: General
Topic: WINBOX GUI need a bit of touch up
Replies: 29
Views: 3467

Re: WINBOX GUI need a bit of touch up

.. especially for v3 ROS with full packages installed..... the main menu seems to be more than v2.9... can see the submenu (from TOOLS or SYSTEMS ....) even with big screen....

any comment mikrotikers?

:D

EDIT: I'm Using WINBOX v. 2.13
by ilius168
Mon May 19, 2008 3:17 pm
Forum: General
Topic: WINBOX GUI need a bit of touch up
Replies: 29
Views: 3467

WINBOX GUI need a bit of touch up

I wonder if someone ever notice that it is somehow difficult to use winbox on any crt lower resolution screen than 1024x768. for example: Tools menu, i am unable to find netwatch because of its location place right on the bottom of the screen. the last submenu from tools is pingspeed, can't see the ...
by ilius168
Mon May 19, 2008 3:05 pm
Forum: General
Topic: How to check/monitor Second Drive for Proxy
Replies: 2
Views: 608

How to check/monitor Second Drive for Proxy

Hi

How to check/monitor Second Drive for Proxy?

As in capacity used, left, health etc...
even graphing for the drive.. like disk usage for the system drive..

Thx!


PS: Is it possible to have 1 proxy with multiple WAN?
by ilius168
Fri May 16, 2008 5:34 am
Forum: General
Topic: Scanning signals remotely with station unit!
Replies: 5
Views: 916

Re: Scanning signals remotely with station unit!

are you sure we can do the scan by using telnet?

Doesn't the station disable wireless connection before it started scanning? (meaning can't do it remotely, VIA wireless connected network)
by ilius168
Mon May 12, 2008 10:35 am
Forum: RouterBOARD hardware
Topic: RB411 restart
Replies: 7
Views: 1784

Re: RB411 restart

Used 8602 (AR5312), 3601/3602 (AR5212) without any problem.
Is it true 411 doesnt support older chipsets? I don't see that written in the user guide.
by ilius168
Wed Apr 30, 2008 5:06 am
Forum: Wireless Networking
Topic: Superchannel with RB411 & XR5 Problem
Replies: 4
Views: 1320

Re: Superchannel with RB411 & XR5 Problem

I've got XR 5 operating at 5,600Mhz, it's true what CarulloS said that the scan list has to be entered manually (smaller ranger) on the station side, or else it wouldn't connect at all (or at least takes long time to associate). However I've used 28v 2.5A adaptors when using XR5, i find it's perform...
by ilius168
Tue Apr 29, 2008 4:36 pm
Forum: RouterBOARD hardware
Topic: Rb600 reboot fix
Replies: 47
Views: 18171

Re: Rb600 reboot fix

THe RB 600 started more regularly now, BIOS upgraded to 2.14, ROS 3.7
ANI turned off....

it's believed to be defect unit... let's see what happen after we get a new RB600....

HEADACHE..... :x
by ilius168
Mon Apr 28, 2008 2:21 pm
Forum: RouterBOARD hardware
Topic: Rb600 reboot fix
Replies: 47
Views: 18171

Re: Rb600 reboot fix

try to switch off ANI in wireless card
What's ANI?
by ilius168
Mon Apr 28, 2008 6:27 am
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 17866

Re: rb600 make reboot every day

my RB 600 rebooted again after 12h uptime, firmware upgraded to 2.14, but it seems to be rebooting more regularly now...

Sent an email to support.

Need your help, please. Thx
by ilius168
Sun Apr 27, 2008 2:58 am
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 17866

Re: rb600 make reboot every day

My RB 600 done the same, but it seems to happen on station side. I'm on ROS 3.7, BIOS 2.13 uptime 4h. Had 8d uptime before last (thought it fixed the reboot problems) While on AP side, i have 8d uptime since BIOS Upgrade . Had experienced none reboot problem (even before BIOS upgrade). Just upgraded...
by ilius168
Sat Apr 26, 2008 2:57 am
Forum: RouterBOARD hardware
Topic: Rb600 reboot fix
Replies: 47
Views: 18171

Re: Rb600 reboot fix

Mine also did the same after upgrading to 2.13, ROS V. 3.7
Happened only on station side.

jan/01 07:00:05 system,error,critical router was rebooted without proper shutdown by watchdog tim
er 
by ilius168
Sat Apr 12, 2008 2:46 pm
Forum: Wireless Networking
Topic: Watchdog Timer
Replies: 3
Views: 3881

Re: Watchdog Timer

so i supposed the problem is the same as

http://forum.mikrotik.com/viewtopic.php?f=7&t=22868

Strangely enough that it only happen to station side, never happen on AP.

I'll try upgrading then. Thanks!
by ilius168
Sat Apr 12, 2008 5:18 am
Forum: Wireless Networking
Topic: Watchdog Timer
Replies: 3
Views: 3881

Watchdog Timer

Hi all, My routerboard (RB 600) rebooted itself for no reason, and have this message on its log: 07:00:05 system,error,critical router was rebooted without proper shutdown by watchdog timer While i checked, it is appeared to be there by default on all of my RB 600. Is this the right setting shall i ...
by ilius168
Thu Mar 20, 2008 2:52 am
Forum: Wireless Networking
Topic: Nstreme Problems!
Replies: 19
Views: 2581

Re: Nstreme Problems!

i find that when using nstreme loaded with traffic, latency becomes stable.

---
but would anyone suggest what is the best setting for using nstreme?
by ilius168
Tue Mar 11, 2008 3:44 am
Forum: General
Topic: WEB PROXY - again...
Replies: 1
Views: 589

WEB PROXY - again...

I have a MT 2.9.50 proxy enabled on 40GB HDD, 512RAM, Pentium IV but i'm wondering why it doesn't used up the whole HDD space, show on mrtg it only uses 29.8Mib. Here is my proxy setting, i see the "reserved for cache" is only upto 30MB, how to change that? enabled: yes src-address: 0.0.0.0 port: 80...
by ilius168
Sat Mar 01, 2008 7:10 pm
Forum: RouterBOARD hardware
Topic: RB not rebooting
Replies: 4
Views: 1030

RB not rebooting

My RB 133 first rebooted and set. But after shutdown (with shutdown command) the unit became not bootable. Both blue and green lights are on, no beeping, Trie reset & soft reset, but doesn't help. Does it mean it's dead? Can i user terminal to make it alive again? Too much trouble to send it out for...
by ilius168
Wed Jan 02, 2008 4:27 pm
Forum: Beginner Basics
Topic: How to erase log
Replies: 5
Views: 1509

Re: How to erase log

ah .. it works thank you!

but... can it be erase just 1 or a few lines?
by ilius168
Wed Jan 02, 2008 4:22 pm
Forum: Beginner Basics
Topic: WinBox issues
Replies: 8
Views: 2382

Re: WinBox issues

have u tried untick "load previous session" in winbox loader?
by ilius168
Wed Jan 02, 2008 4:02 pm
Forum: Beginner Basics
Topic: How to erase log
Replies: 5
Views: 1509

Re: How to erase log

is this a command line or instruction??

where can i set store line?

ps: i'm using 2.9.49

thx
by ilius168
Wed Jan 02, 2008 1:36 pm
Forum: Beginner Basics
Topic: How to erase log
Replies: 5
Views: 1509

How to erase log

Hi, how to erase log created?
Saw the instruction somewhere, but forgot where...

No luck with search...


thx
by ilius168
Mon Dec 24, 2007 10:24 pm
Forum: Wireless Networking
Topic: Superchanel Licence
Replies: 13
Views: 2451

Re: Superchanel Licence

what happen if an RB breakdown and got replaced, while a superchannel license was installed seperately (not via the reseller) in the RB before replacement?
by ilius168
Sun Dec 23, 2007 3:59 pm
Forum: General
Topic: [Questions] IP Addressing
Replies: 2
Views: 563

Re: [Questions] IP Addressing

hum... I'll do some drawing & post them here, might explain the questions better.

Thanks ;)
by ilius168
Sun Dec 23, 2007 3:54 pm
Forum: RouterBOARD hardware
Topic: Does RB 133c supports WDS-SLAVE
Replies: 5
Views: 1478

Re: Does RB 133c supports WDS-SLAVE

:D or else, nobody would buy Level 4 Licenses :lol:
;) ;)
by ilius168
Sun Dec 23, 2007 6:31 am
Forum: General
Topic: WISPS HOW TO MANAGE BILLING AND PAYMENTS.
Replies: 3
Views: 1038

Re: WISPS HOW TO MANAGE BILLING AND PAYMENTS.

There're a few software that can do the job, free or paid.

checkout:
http://www.alepo.com/isp-billing.shtml - paid

or search for cwisp2 - free (under linux)

and many more
by ilius168
Sun Dec 23, 2007 6:25 am
Forum: General
Topic: [Questions] IP Addressing
Replies: 2
Views: 563

[Questions] IP Addressing

Hi, Our provider has given us Point to Point Public IP Address (/30), and a few blocks of Public IP Addresses, consist of /29, /28, /27 subnets. So that they let us to the bandwidth managing on our own to each ip addresses, with the gateway of each client are actually in our router. My question is, ...
by ilius168
Sun Dec 23, 2007 6:11 am
Forum: RouterBOARD hardware
Topic: Does RB 133c supports WDS-SLAVE
Replies: 5
Views: 1478

Re: Does RB 133c supports WDS-SLAVE

Great, it works!!
by ilius168
Sun Dec 23, 2007 6:05 am
Forum: RouterBOARD hardware
Topic: RB133 very slow with v3.0
Replies: 5
Views: 1411

Re: RB133 very slow with v3.0

Slow =

- loading the os, from start, slower than using 2.9.46 (it's original)
- after os loaded, telnet to the unit takes longer then 2.9.x
- in winbox, it takes a while to display everything up (such as interface information, traffic, ip addresses, even slower when there're queue set-up.
by ilius168
Fri Dec 21, 2007 3:29 am
Forum: RouterBOARD hardware
Topic: RB133 very slow with v3.0
Replies: 5
Views: 1411

RB133 very slow with v3.0

RB133 very slow with v3.0, is this normal?
Tried on a few RB 133 (& c's) all the same, slow...

Thx
by ilius168
Fri Dec 21, 2007 3:23 am
Forum: RouterBOARD hardware
Topic: ROS 3.X on RB333, rebooting it self
Replies: 10
Views: 1816

Re: ROS 3.X on RB333, rebooting it self

I got the same problem with 'some' of my RB 333, everytime i changed setting, the RB reboot itself after the changes were applied.
It happened ONLY when using winbox. it's fine with telnet.
Using 18V adaptor with NMP8602 mPCI, firmware upgraded to RC10 & RC11, from its standard RC4.
by ilius168
Mon Dec 10, 2007 4:00 pm
Forum: Beginner Basics
Topic: Licenses
Replies: 5
Views: 1434

Re: Licenses

Damn... samething here......

Upgraded (thought to be an upgrade!!), my RB 333 with new licence (asked for superchannel) but given a level 4 license. Now my RB333 have only 23hrs left with 0 level.

What to do... can't wait for 3-4 business day..... please help.

Thanks in advance!
by ilius168
Fri Dec 07, 2007 1:05 pm
Forum: Wireless Networking
Topic: [Help] VOICE (UDP) over RB333 < 2km
Replies: 11
Views: 1322

Re: [Help] VOICE (UDP) over RB333 < 2km

The problem may not be the pps capability, it could be just the throughput problem. Currently the traffic never hits as high as 75,000pps, max that we've observed were <2000pps (around 800-900kbps). No firewall running, just plain routing & simple queue for 5 ip addresses, just for graphing purposes...
by ilius168
Fri Dec 07, 2007 2:06 am
Forum: Wireless Networking
Topic: [Help] VOICE (UDP) over RB333 < 2km
Replies: 11
Views: 1322

Re: [Help] VOICE (UDP) over RB333 < 2km

Hi thanks all for the tips! Had traffic load of 800kbps, ping stays at 1 digit. Using 2.4Ghz-only-G band with superchanels seems to work. CCQ is 100%/98% most of the time. Bandwidth tested 28mbps oneway while average 13mbps on both tx/rx. (too bad, G-Turbo mode doesn't work on my RB 333) traffic = t...
by ilius168
Thu Dec 06, 2007 3:06 am
Forum: Wireless Networking
Topic: 2.4GHz-G-Turbo Missing in RBs?
Replies: 5
Views: 1607

Re: 2.4GHz-G-Turbo Missing in RBs?

I'm using NMP8602 mPCI on both PC Router and my RBs. Same mPCI same chipset. Both operating using superchannel frequency mode (i assume there's no country restriction on this mode right?). Here are some info on PC Router, v.2.9.38 0 interface-type=Atheros AR5413 chip-info="mac:0xa/0x5, phy:0x61, a5:...
by ilius168
Sun Dec 02, 2007 12:39 am
Forum: Wireless Networking
Topic: 2.4GHz-G-Turbo Missing in RBs?
Replies: 5
Views: 1607

Re: 2.4GHz-G-Turbo Missing in RBs?

Oops, wrong room, can someone please move my post to wireless section? :D
by ilius168
Sun Dec 02, 2007 12:33 am
Forum: Wireless Networking
Topic: 2.4GHz-G-Turbo Missing in RBs?
Replies: 5
Views: 1607

2.4GHz-G-Turbo Missing in RBs?

Hi All,
just realised, 2.4GHz-G-Turbo mode has been missing in RBs, but available when using PC Router with wireless PCI (AR5413 chipsets), v.2.9.27 & 2.9.38

Can someone from MT please confirm? or if there're settings that i've missed with RB?

Thanks!
by ilius168
Sat Dec 01, 2007 3:04 am
Forum: Wireless Networking
Topic: [Help] VOICE (UDP) over RB333 < 2km
Replies: 11
Views: 1322

Re: [Help] VOICE (UDP) over RB333 < 2km

We had about 43-45 calls when it hits 700kbps, but sometimes 63calls but most calls dropped because the latency hits 3 digits stable.... :( Haven;t noted the pps, but i'm sure it;s pretty high. I'll check again. Use pc routers with same mPCI signal strengh was the same -39db - -45dbi, higher thruput...
by ilius168
Thu Nov 29, 2007 8:06 pm
Forum: Wireless Networking
Topic: [Help] VOICE (UDP) over RB333 < 2km
Replies: 11
Views: 1322

Re: [Help] VOICE (UDP) over RB333 < 2km

i'm only operating it on 18db tx power.

using NMP8602 mPCI...

:(
by ilius168
Thu Nov 29, 2007 8:04 pm
Forum: Wireless Networking
Topic: Routerboard trouble...
Replies: 19
Views: 3634

Re: Routerboard trouble...

if you got another mt installed somewhere (RB or ROuterOS) & working, connect those two routers, then try IP Neighbor, see if the messed up router is there, then right click on it and select mac-telnet.

hope this help
by ilius168
Thu Nov 29, 2007 7:07 pm
Forum: Wireless Networking
Topic: [Help] VOICE (UDP) over RB333 < 2km
Replies: 11
Views: 1322

[Help] VOICE (UDP) over RB333 < 2km

Hi all, We are trying a link for a voice (VOIP) provider using RB 333. Distance around 2km, LOS. using 2ghz-10Mhz band. signal strength for both side were -39db to -41db The problem is, whenever the traffic hits 700kbps or more, the ping time goes high above 600ms. then drops after 10-20pings. (This...
by ilius168
Tue Nov 27, 2007 2:56 pm
Forum: General
Topic: Hide Neighbors, how?
Replies: 3
Views: 2065

Re: Hide Neighbors, how?

/ ip firewall filter add chain=output action=drop src-port=5678 protocol=udp comment="" disabled=no Thanks! It works with the firewall rule. This is what i would like to achieve: User (a client) with winbox (or router installed) within their network, that i dont want them to be able to see any mikr...
by ilius168
Tue Nov 27, 2007 2:27 am
Forum: General
Topic: Hide Neighbors, how?
Replies: 3
Views: 2065

Hide Neighbors, how?

How to avoid Mikrotik devices (router or wireless), from being seen, in IP Neighbour or Winbox login?
(disabling Discovery Interface will only stop a router to see other Mikrotiks, but not vice versa)

Can do it with having vlan setup on each device, but is it the only way?


Thx
by ilius168
Mon Nov 26, 2007 4:17 pm
Forum: RouterBOARD hardware
Topic: Router OS doesnt want to change date
Replies: 2
Views: 827

Re: Router OS doesnt want to change date

oh won't it lose all the settings while it doesn't have any battery :D
(no it doesn't :D)
by ilius168
Mon Nov 26, 2007 3:49 pm
Forum: RouterBOARD hardware
Topic: Router OS doesnt want to change date
Replies: 2
Views: 827

Router OS doesnt want to change date

Hi,
I have few times experience on some router os that doesn't like the time or date being changed.

Just got the new router board with v3.0rc6 installed, still the same, time & date not changed.


[admin@MIKROTIK] /system clock> pri
            time: 07:10:46
            date: jan/01/1970
by ilius168
Sun Nov 25, 2007 1:09 am
Forum: RouterBOARD hardware
Topic: Does RB 133c supports WDS-SLAVE
Replies: 5
Views: 1478

Does RB 133c supports WDS-SLAVE

Does RB 133c supports WDS-SLAVE, since it only comes with Level 3 OS that doesnt support Mode as AP?

Thx
by ilius168
Fri Oct 19, 2007 4:04 am
Forum: General
Topic: [ASK] Route ONLY specific ports
Replies: 2
Views: 554

Re: [ASK] Route ONLY specific ports

Hi, Here are some codes that i use (currently disabled). In Firewall Mangle: 8 X chain=prerouting action=mark-routing new-routing-mark=Priority passthrough=yes src-address=192.168.18.9 dst-port=443 protocol=tcp dst-address-list=!SEL 9 X chain=prerouting action=mark-routing new-routing-mark=Priority ...
by ilius168
Thu Oct 18, 2007 6:16 am
Forum: General
Topic: [ASK] Route ONLY specific ports
Replies: 2
Views: 554

[ASK] Route ONLY specific ports

Hi All,
I have ADSL + FO connection, and i wish to Route ALL traffic other than, say, 5050, 443 (for Yahoo Messenger), to ADSL.

Tried mangle traffic uses ports 5050, 443, then route mark, doesn't work.

Tried drop all connection that uses 5050, 443 in ADSL's ether also not working.

Any idea, thanks!
by ilius168
Wed Oct 17, 2007 11:02 am
Forum: General
Topic: WEBPROXY again :D
Replies: 8
Views: 1181

Re: WEBPROXY again :D

Player on PC caches files already received through streaming. On repeated request it does not use streaming at all, it just shows already downloaded file. Yeap that's what i meant "what already downloaded", thought it would do the same with proxy. But i think i got your idea that if proxy does cach...
by ilius168
Tue Oct 16, 2007 7:33 pm
Forum: General
Topic: WEBPROXY again :D
Replies: 8
Views: 1181

Re: WEBPROXY again :D

I think it's because in case on internet video you are not downloading certain files, you are streaming data. that can't be cached. but when you do a streaming, once the video is finsihed, then you replay the video again, it uses what's stored on the pc's cache. Doesn't that mean proxy should be ab...
by ilius168
Tue Oct 16, 2007 7:20 am
Forum: General
Topic: Winbox stops responding in wine
Replies: 5
Views: 837

Re: Winbox stops responding in wine

could it be the firewall still block the port for winbox?
by ilius168
Tue Oct 16, 2007 6:12 am
Forum: General
Topic: WEBPROXY again :D
Replies: 8
Views: 1181

Re: WEBPROXY again :D

Tried that, if you notice the object size currently is 40960kb = 40.96Mb.
Doesn't work..

Thanks ashish
by ilius168
Tue Oct 16, 2007 5:36 am
Forum: General
Topic: WEBPROXY again :D
Replies: 8
Views: 1181

WEBPROXY again :D

Just wondering how to make webproxy to-cache large files such as video files, like flv.youtube, google video, and other types of file? At the moment, it seems like it's only caching jpegs, gifs and some static text. Thx WebProxy setting: enabled: yes src-address: 0.0.0.0 port: 8080 hostname: "proxy"...
by ilius168
Tue Oct 16, 2007 5:11 am
Forum: General
Topic: [HELP!!] Bruceforce ATTACKS!
Replies: 3
Views: 731

Re: [HELP!!] Bruceforce ATTACKS!

the help i need here is how to stop this fxxxer's IP not entering the router... and trying to login or whatever it's doing ... it filled up my syslog files :(

no the IP is not in the allow address list ...



-- Finally done it with drop rules in ip route
3 dst-address=61.178.88.106/32 action=drop
by ilius168
Tue Oct 16, 2007 3:54 am
Forum: General
Topic: [HELP!!] Bruceforce ATTACKS!
Replies: 3
Views: 731

[HELP!!] Bruceforce ATTACKS!

Hi All, Having trouble dropping a bruce force attack from this IP 61.178.88.106 via ftp. Done drop input anything not from our address lists Done the way shown in wiki thx guys! just to show a few lines of log: (it comes almost every second! quite annoying) 07:35:51 system,error,critical login failu...
by ilius168
Sun Oct 14, 2007 6:41 am
Forum: RouterBOARD hardware
Topic: RB to replace PC-ROUTER
Replies: 2
Views: 1113

RB to replace PC-ROUTER

Hi, I'm just wondering would it make anydifference if i replace ,my pc router to a RB (say RB532A) that does the following tasks? Shall i stay with pc? My current PC Specs & the Jobdesc: IBM P3 - 850Mhz RAM 512Mbps CF - 512MB RB44 Router OS v. 2.9.46 Got 3 WAN, doing Load Balanced Running BGP peers ...
by ilius168
Fri Oct 05, 2007 2:59 pm
Forum: General
Topic: New to - PPPOE
Replies: 1
Views: 419

New to - PPPOE

Hi All,

i'm new to PPPOE, that i heard it's good to avoid ip changing by clients. DOne by following the manual, and it works, BUT.... i couldn't find way to do bandwidth limiting. Any advice please? :)

What is the advantage and disadvantage of using PPPOE?

Thanks guys!
by ilius168
Thu Sep 20, 2007 10:21 pm
Forum: General
Topic: MT + External Proxy
Replies: 4
Views: 896

Re: MT + External Proxy

Didnt quite get you. :D

Yes i'm doing load balance, by src address list and dst address list. (mark routing)

thx
by ilius168
Thu Sep 20, 2007 3:20 pm
Forum: General
Topic: MT + External Proxy
Replies: 4
Views: 896

Re: MT + External Proxy

Problem 1: Unless the user specifies to use the proxy at the server within their browser, then they'll be able to surf. The redirect rule of course needs to !NOT include the proxy server itself. Tried to use proxy in the user's browser, but ended up the user is not routed to another gateway that he...
by ilius168
Fri Sep 14, 2007 6:13 pm
Forum: General
Topic: MT + External Proxy
Replies: 4
Views: 896

MT + External Proxy

Hi All, Just encounter another problem, Got an external proxy (linux suse + squid 2.6stable5) with MT 2.9.46. I'm redirecting all 80 traffic to proxy server (192.168.1.3) MT IP address 192.168.1.1 Client Address: 192.168.10.1/24 (& more) Some client is routed to another gateway, some use the default...
by ilius168
Fri Sep 14, 2007 4:19 am
Forum: General
Topic: Limewire
Replies: 12
Views: 2225

Re: Limewire

why not try this rule, apply to the greedy client's ip only though!
this allow only 5 connection to an IP, Hope this help.
1   ;;; Limit connection to 5
     chain=forward action=drop tcp-flags=syn src-address=192.168.1.119 
     protocol=tcp connection-limit=6,32 
by ilius168
Thu Sep 13, 2007 4:38 pm
Forum: General
Topic: One Way Satellite
Replies: 20
Views: 2041

Re: One Way Satellite

oAnd I don't think the DVB provider gives private IP cause you'll need a public IP address to route their downlink.
Unfortunately, i got a NATted IP address of 10.11.1.154 while gateway ip is 10.11.0.1
There's a real Public IP address though, but can the ISP 2 use it?
by ilius168
Wed Sep 12, 2007 11:33 pm
Forum: General
Topic: One Way Satellite
Replies: 20
Views: 2041

Re: One Way Satellite

Got your idea, but questions came up. Would it be still working if the one way DVB is down, i meant automatically download goes thru the 2nd ISP's gateway , or do we have to tell the ISP to change the configuration? and would i still be able to do downloading from the 2nd isp with these configuratio...
by ilius168
Tue Sep 11, 2007 4:37 pm
Forum: General
Topic: One Way Satellite
Replies: 20
Views: 2041

Re: One Way Satellite

yes... hulk bd... put your thing here, waiting.... :D
by ilius168
Tue Sep 11, 2007 4:30 pm
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1155

Re: Is this strange?

thank you all for the responds and advice. I think i just found a solution, where i limit the number of connection to 5, hell it did stop the greedy client from download at its queue limit & the webproxy is not working to the max bandwidth anymore. here is the code i use 65 ;;; Limit connection to 5...
by ilius168
Mon Sep 10, 2007 9:19 pm
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1155

Re: Is this strange?

why are you running the web proxy in your 1st router? let me ask you something are all your clients connected to your distributed router (2nd MT OS) and get their IP from this router? I think you can enable the web proxy in your 2nd router and make a dst-nat for it only, and disable the 1st web pro...
by ilius168
Mon Sep 10, 2007 9:11 pm
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1155

Re: Is this strange?

Well mikrotik's web-proxy 2.9.X is a stripped version of squid so you loose a lot of functionality... since you say that the weird traffic is being routed to a known client's address then its not an attack on the router's web proxy but rather a client being greedy .... why not block rapidshare's si...
by ilius168
Mon Sep 10, 2007 8:05 am
Forum: General
Topic: Upgrade from 2.9 to 3.0
Replies: 5
Views: 1811

Re: Upgrade from 2.9 to 3.0

Is ver 3.rc 04 ready to be used in actuall network? Or good for trying only?

I'm using 2.9.45. Not very good at handling the router yet :">

Cheers
by ilius168
Mon Sep 10, 2007 7:41 am
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1155

Re: Is this strange?

I'm sure this is something to do with WEB-PROXY, once i disable the redirecting to web proxy (port 80 -> port 8080), the traffic seems to be fine (incoming traffic = outgoing traffic). According to some information from squid, there is a term "half open connection" or "half close client" not sure if...
by ilius168
Mon Sep 10, 2007 4:27 am
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1155

Re: Is this strange?

I'm using local ip on router one, even the sat is local IP. I've done blockage to the proxy. (webproxy access). It appears to me, once the client finished downloading (from rapidshare, 80.239.151.x) the traffic also stop. I wonder if this is the effect of the proxy that act as buffer. (Stored whatev...
by ilius168
Sun Sep 09, 2007 12:48 pm
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1155

Re: Is this strange?

forgot to add: i used DST-NAT to redirect all port 80 traffic to Router 1 port 80 6 ;;; PROXY via Satellite chain=dstnat action=dst-nat to-addresses=192.168.5.1 to-ports=80 src-address=192.168.1.0/24 dst-port=80 protocol=tcp While in Router 1, DST NAT all port 80 to port 8080 (web proxy) 1 chain=dst...
by ilius168
Sun Sep 09, 2007 12:44 pm
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1155

Is this strange?

Dear All, Could anyone tell me if this look strange? http://img65.imageshack.us/img65/7254/proxylc4.th.jpg Router 1 MT 2.9.45 Interface <VSAT> connected to the Modem Interface <Distribution> connected to a distribution router (router 2) NAT WEB PROXY enabled Router 2 MT 2.9.45 Bandwidth Management t...
by ilius168
Sun Sep 02, 2007 6:41 pm
Forum: Beginner Basics
Topic: changing drive = changin license?
Replies: 1
Views: 808

changing drive = changin license?

Dear All,
1. I'm wondering if i want to change my mikrotik installed on CF and changed to DOM, do you have to buy another license or can i move it just as is?

2. How to make MT recognize SATA drives?

thanks!

PS: I'm using MT ver. 2.9.45
by ilius168
Sun Aug 26, 2007 6:49 am
Forum: General
Topic: WebProxy LOG
Replies: 9
Views: 2844

Re: WebProxy LOG

How to enable WebProxy LOG. I want to store it remotelly. i think you can use syslog daemon from MT. Point the logging (/system logging) to the ip address where you have the syslog daemon, port 514 . DOne it before, but the problem is the log in syslog couldn't save by it self automatically, so eve...
by ilius168
Mon Aug 20, 2007 6:10 pm
Forum: General
Topic: Split UpStream & Downstream
Replies: 14
Views: 2158

Re: Split UpStream & Downstream

if the FO would allow your customer subnet through their source-filters (or if they are too ignorant to have any), you should be able to do this without any active routing protocols. Then you would just need to do default route one way and let the returning traffic come the other way. If you NAT yo...
by ilius168
Wed Aug 08, 2007 5:20 pm
Forum: General
Topic: [HELP] P2P Traffic Limiting
Replies: 4
Views: 1698

Re: [HELP] P2P Traffic Limiting

tried that, didn't work either :( i currently have 2 other mangle rules for other traffic limiting (Sat & Int). I wonder if these effecting the P2P mangles. 3 ;;; Mark packets via VSAT chain=postrouting action=mark-connection new-connection-mark=VSAT-Conn passthrough=yes out-interface=Satellite 4 ch...
by ilius168
Wed Aug 08, 2007 7:38 am
Forum: General
Topic: [HELP] P2P Traffic Limiting
Replies: 4
Views: 1698

[HELP] P2P Traffic Limiting

Hi All, I'm trying to limit P2P traffic for my network. Tried few tricks from the manual & forums but didn't work. following is the mangle rule i'm currently used: 1 chain=postrouting action=mark-connection new-connection-mark=P2P Conn passthrough=yes p2p=all-p2p 2 chain=prerouting action=mark-packe...
by ilius168
Wed Jul 18, 2007 2:57 am
Forum: General
Topic: Split UpStream & Downstream
Replies: 14
Views: 2158

Re: Split UpStream & Downstream

Your Screwed... :-(

That i know... thanks!

Good answer though, mate!! :P
by ilius168
Wed Jul 18, 2007 2:55 am
Forum: General
Topic: MAU tau dunk fungsi2 PPP secret, PPTP-server,etc
Replies: 6
Views: 2771

Re: MAU tau dunk fungsi2 PPP secret, PPTP-server,etc

fungsi ppp secret di mikrotik apa yak ?

fungsi pptp-server n pptp-client di mikrotik apa ?

thks
thinking of everyone is using translator?

s.u.i.d
by ilius168
Mon Jul 16, 2007 1:54 am
Forum: General
Topic: Split UpStream & Downstream
Replies: 14
Views: 2158

Re: Split UpStream & Downstream

I do this but you need BGP (or your ISP's help)

Filteres need to be open for both ISP's for your IP Range
What if the ISP is not friendly with BGP ? :-(
by ilius168
Sun Jul 15, 2007 7:11 am
Forum: General
Topic: Split UpStream & Downstream
Replies: 14
Views: 2158

Re: Split UpStream & Downstream

Dear Smith,
I believe there's way can be done, as some isp' do use DVB which is one way only (downstream) while upstream via FO or other method.

How can we do it with MT?

my current setup is:

SAT
|
MT-------- Clients
|
FO
by ilius168
Sun Jul 15, 2007 7:05 am
Forum: General
Topic: How to erase graphic history(MRTG)
Replies: 2
Views: 841

Re: How to erase graphic history(MRTG)

Yup done!
I've done it before but i used undo instead of re-enter the ip :D

Thanks!
by ilius168
Fri Jun 01, 2007 3:25 am
Forum: General
Topic: Proxy server without PUBLIC IP address
Replies: 1
Views: 476

Proxy server without PUBLIC IP address

Dear all,

Can we run web proxy (or external proxy) without having to use PUBLIC IP Address?

Thanks
Iv
by ilius168
Tue May 15, 2007 7:36 pm
Forum: General
Topic: How to erase graphic history(MRTG)
Replies: 2
Views: 841

How to erase graphic history(MRTG)

Hi All,

How to remove the mrtg history of an IP?

Thanks in advance
by ilius168
Wed Apr 25, 2007 2:38 am
Forum: General
Topic: Traffic Counter Help.
Replies: 4
Views: 2196

Did you mean using Traffic Counter v1.9 or 'just' using IP Accounting with Web Access?
by ilius168
Mon Apr 23, 2007 6:14 pm
Forum: General
Topic: Traffic Counter Help.
Replies: 4
Views: 2196

I guess not
by ilius168
Sun Apr 22, 2007 3:59 am
Forum: General
Topic: Traffic Counter Help.
Replies: 4
Views: 2196

Traffic Counter Help.

HI,
Can anyone advise how to use traffic counter please?
I've just downloaded from MT website & run, but it doesn't connect to my MT router.

Thx.
by ilius168
Wed Apr 18, 2007 7:11 pm
Forum: General
Topic: Split UpStream & Downstream
Replies: 14
Views: 2158

Split UpStream & Downstream

Hi, how do i split up stream to gateway1 and downstream to gateway2...
Thx :)
by ilius168
Sat Apr 14, 2007 5:43 pm
Forum: Wireless Networking
Topic: PtP Link 65 km and at least 48 mb/s
Replies: 73
Views: 11893

Hi marxs, nice DC Converters there, but again, how do we feed the 24DC?? :? btw, this is how i build my pc based MT, with standard AC powersupply (120W) inside an custom build acrylic box. though i find that it's not such a good idea to have AC up on the tower and it generates quite a high heat with...