Community discussions

Search found 22 matches

by AlexT
Tue Jan 29, 2019 4:40 pm
Forum: General
Topic: hAP ac^2 problem
Replies: 7
Views: 956

Re: hAP ac^2 problem

This is all output /tool profile cpu = all
Probably, cpu2 and cpu3 did not get here due to the fact that they were not involved at the time of the "profiling"
by AlexT
Tue Jan 29, 2019 2:57 pm
Forum: General
Topic: hAP ac^2 problem
Replies: 7
Views: 956

Re: hAP ac^2 problem

The posted config does not correspond to description of your tests (e.g. ether4 is not mentioned at all in posted config). When you start your tests, what does /tool profile cpu=all show? Any CPU maxed-up? iperf-client is running on a laptop that is enabled by 1 Gbps link to ether2; a torrent clien...
by AlexT
Tue Jan 29, 2019 2:09 pm
Forum: General
Topic: hAP ac^2 problem
Replies: 7
Views: 956

Re: hAP ac^2 problem

# jan/29/2019 14:21:00 by RouterOS 6.43.8 # software id = XXXX-XXXX # # model = RouterBOARD D52G-5HacD2HnD-TC # serial number = XXXXXXXXXXX /interface bridge add name=bridge1 /interface wireless set [ find default-name=wlan1 ] ssid=MikroTik set [ find default-name=wlan2 ] ssid=MikroTik /interface w...
by AlexT
Tue Jan 29, 2019 10:44 am
Forum: General
Topic: hAP ac^2 problem
Replies: 7
Views: 956

Re: hAP ac^2 problem

When I plugged a 100 Mbps laptop into catalyst 3560E, and cat3560E hooked up 1 Gbps link into a mikrotik- everything worked perfectly.

How to make mikrotik work normally when devices with different link speed are connected to it?

P. S. do not suggest using cat3560E :)
by AlexT
Mon Jan 28, 2019 5:46 pm
Forum: General
Topic: hAP ac^2 problem
Replies: 7
Views: 956

hAP ac^2 problem

There is hAP ac ^ 2 with 1 Gbps uplink in ether1 (DHCP client); The 1st laptop is connected by a 100 Mbps link in ether2 on mikrotik; 2nd laptop connected with 1 Gbps link in ether3 on mikrotik; 3rd laptop connected with 1 Gbps link in ether4 on mikrotik; Mikrotik has default configuration (except f...
by AlexT
Fri Jul 13, 2018 3:32 pm
Forum: Announcements
Topic: v6.42.6 [current]
Replies: 102
Views: 29670

Re: v6.42.6 [current]

Clearing the winbox cache has not helped, but deleting files from %AppData%\Roaming\Mikrotik\Winbox - helped.
Guys, thanks for the help!
by AlexT
Fri Jul 13, 2018 10:04 am
Forum: Announcements
Topic: v6.42.6 [current]
Replies: 102
Views: 29670

Re: v6.42.6 [current]

ROS v6.42.6.
WinBox v3.16.
After upgrade:
hAP lite:
hAP lite.png
hAP AC^2:
hAP AC^2.png


Where is the information on the write sectors?


Previously, it was shown in WinBox, now only in the console:
term.png
by AlexT
Tue May 29, 2018 2:56 pm
Forum: Beginner Basics
Topic: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.
Replies: 6
Views: 1450

Re: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.

Probably, the scheme is working (I did not check it), but it requires using an external server with a proxy. Is there a way to make the mikrotik as a reverse proxy (without external server)?
by AlexT
Fri May 25, 2018 7:00 am
Forum: Beginner Basics
Topic: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.
Replies: 6
Views: 1450

Re: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.

Thank you very much for your participation in solving my question! As soon as something turns out I'll write.
by AlexT
Thu May 24, 2018 8:55 pm
Forum: Beginner Basics
Topic: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.
Replies: 6
Views: 1450

Re: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.

You can try it with a http reverse proxy that rewrites the host header to the correct one (unitv.xxxxxx.net).
Can you briefly describe the scheme using the reverse proxy for my task?
by AlexT
Wed May 23, 2018 10:05 am
Forum: Beginner Basics
Topic: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.
Replies: 6
Views: 1450

Re: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.

It seems that I found out what the problem is, but I have not yet figured out how to circumvent it in a universal way. The essence of the problem is as follows: The second provider, with whom I thought the NAT rule did not work (and it worked quite correctly), uses for broadcasting IPTV software Ast...
by AlexT
Mon May 21, 2018 2:37 pm
Forum: Beginner Basics
Topic: The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.
Replies: 6
Views: 1450

The NAT rule for viewing IPTV from a provider's UDP-to-HTTP server from outside the provider's network.

Hello! There is a NAT rule for viewing IPTV from the provider's UDP-to-HTTP server from outside the provider's network (ie from the Internet): ;;; iptv for remote clients       chain=dstnat action=dst-nat to-addresses="IP of the UDP-to-HTTP provider server" to-ports=4022       protocol=tcp in-interf...
by AlexT
Thu May 10, 2018 2:27 pm
Forum: General
Topic: Blocking IPv6 through the EoIP tunnel
Replies: 4
Views: 779

Re: Blocking IPv6 through the EoIP tunnel

which ports use NDP?
by AlexT
Thu May 10, 2018 1:58 pm
Forum: General
Topic: Blocking IPv6 through the EoIP tunnel
Replies: 4
Views: 779

Blocking IPv6 through the EoIP tunnel

Hi!
How to disable ipv6 advertise through the EoIP tunnel?
In the bridge settings, where the EoIP tunnel was added, I successfully blocked DHCPv4 (drop udp on 67-68), but I can not understand how to block the IPv6.
Please, help.
by AlexT
Fri Apr 20, 2018 4:07 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113322

Re: v6.43rc [release candidate] is released!

*) wireless - improved compatibility with BCM chipset devices; [/color] Is that one for Broadcom IPQ4018 based cAP ac and hAP ac^2 devices? Broadcom is not Qualcomm Perhaps this item implies better compatibility of client devices with the BCM chip (for example: smartphones, tablets, laptops, etc.).
by AlexT
Fri Apr 20, 2018 3:00 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 113322

Re: v6.43rc [release candidate] is released!

*) winbox - show "Switch" menu on cAP ac devices;
*) winbox - show correct "Switch" menus on CRS328-24P-4S+;

How about displaying a "Switch" menu on hAP ac^2?

P. S. I hoped that this version will improve the work of Wi-Fi in the above device... Maybe in the next version...
by AlexT
Wed Apr 11, 2018 4:14 pm
Forum: RouterBOARD hardware
Topic: hAP ac² High temperature
Replies: 50
Views: 10686

Re: hAP ac² High temperature

Hmm.. Not sure is this a (known?) bug or something else, but with 6.41.3 on hAP ac^2 it seems that the system/health is not printing anything: [x@y] > system health print [x@y] > Also Health-page in Winbox shows only buttons, not any actual data. Not so big deal for me, but just mentioned. :) hAP a...
by AlexT
Sun Apr 01, 2018 10:48 am
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 31202

Re: v6.41.3 [current]

hAP ac², 6.41.3: [xxx@router] > /interface wireless spectral-scan wlan1 failure: this device can not do spectral scan [xxx@router] > /interface wireless spectral-scan wlan2 failure: this device can not do spectral scan and one more thing 2.4 GHz https://thumb.ibb.co/bWT2kS/Tx_Power_2_4.png 5.2 GHz h...
by AlexT
Sat Mar 31, 2018 8:43 pm
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 31202

Re: v6.41.3 [current]

And what about this (hAP ac²)?
Where can I see "Overall stats", "Rx Stats" and "Tx Stats" for wired interfaces?
Is
/interface ethernet print stats
and
/interface ethernet switch print stats
not what you want?
From console is ok, but what about show this in winbox & web-iface?
by AlexT
Fri Mar 30, 2018 10:48 pm
Forum: General
Topic: hAP ac² LAN->WiFi 5GHz performance issue.
Replies: 23
Views: 5288

Re: hAP ac² LAN->WiFi 5GHz performance issue.

I have the same problem with hap ac2. 2.4 GHz and 5.2 GHz work poorly, speed is unstable.
by AlexT
Fri Mar 30, 2018 11:42 am
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 31202

Re: v6.41.3 [current]

Switch menu was removed recently because the hw accelerated bridges are the way mikrotik goes these days.
It's clear, but it's bad.

And what about this (hAP ac²)?
Where can I see "Overall stats", "Rx Stats" and "Tx Stats" for wired interfaces?
by AlexT
Thu Mar 29, 2018 10:20 am
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 31202

Re: v6.41.3 [current]

Hi!
hAP ac², 6.41.3.

Where is the switch menu in winbox/web-iface?
Where can I see "Overall stats", "Rx Stats" and "Tx Stats" for wired interfaces?

P. S. Compared with my first mikrotik device (hAP lite classic (RB941-2nD)), the wireless 2.4 GHz in hAP ac² sucks