Community discussions

MikroTik App

Search found 8 matches

by anschluss
Wed Sep 02, 2020 1:53 am
Forum: General
Topic: Trouble with remote access
Replies: 7
Views: 353

Re: Trouble with remote access

I can remote log in to my router using L2TP-IPSec, on my LAN, can ping and Winbox access my Mikrotik APs, but I cannot WinBox access my main router. Let me guess: while you defined suitable rules to forward traffic to your LAN, you probably forgot to set up input rules to allow the ppp interface ac...
by anschluss
Sat Apr 25, 2020 4:26 am
Forum: General
Topic: RB4011 and RB1100 AHx4 "bricks" randomly
Replies: 151
Views: 29988

Re: RB4011 and RB1100 AHx4 "bricks" randomly

From what I gather here, it doesn't sound like there is a magic software version yet. The one post I saw that piqued my interest was reducing the clock rate. For those that have tried it, what were the results? No more problems since reducing the CPU freq to 1200 Mhz; running for two months now.
by anschluss
Mon Mar 02, 2020 4:09 pm
Forum: General
Topic: RB4011 and RB1100 AHx4 "bricks" randomly
Replies: 151
Views: 29988

Re: RB4011 and RB1100 AHx4 "bricks" randomly

We've run into this with a few clients that run the 4011 and have used the following as a workaround while we work on a ticket with MikroTik. It seems to be more stable in the few we have tested. Set the CPU frequency to 1200mhz system routerboard settings set cpu-frequency=1200 Thanks very much fo...
by anschluss
Fri Jan 31, 2020 7:14 pm
Forum: Announcements
Topic: v6.45.8 [long-term] is released!
Replies: 87
Views: 64242

Re: v6.45.8 [long-term] is released!

I think some confusion and unrest may relate to the wording chosen in the release notes. Previously (up to and including 6.44.6) the changelog started with "MAJOR CHANGES IN v[new release no.]" and did not state any since version number. The current heading for the v6.45.8, however, starts with a li...
by anschluss
Tue Nov 05, 2019 2:43 am
Forum: General
Topic: Slow speed through gre+ipsec tunnel
Replies: 11
Views: 3676

Re: Slow speed through gre+ipsec tunnel

I am not an network appliance test engineer - I am just a consultant setting up network equipment. If after more than a day of tinkering according to advice from more knowledgable people I cannot achieve decent speed, I simply have to give up for economic reasons. While it may be true that under wha...
by anschluss
Mon Nov 04, 2019 4:00 am
Forum: General
Topic: Slow speed through gre+ipsec tunnel
Replies: 11
Views: 3676

Re: Slow speed through gre+ipsec tunnel

No problem, here you go, not that it makes a huge difference: > iperf3 -s -f M ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.55.55, port 61613 [ 5] local 192.168.1.22 p...
by anschluss
Sun Nov 03, 2019 3:05 pm
Forum: General
Topic: Slow speed through gre+ipsec tunnel
Replies: 11
Views: 3676

Re: Slow speed through gre+ipsec tunnel

Hello, the same problem here - two ccr1009 over 1 Gbit/sec fiber links attached to the same switch. This is the result of a bandwith test performed on a weekend with no other load on the network: Receive test across GRE/IPsec tunnel (with CPU load): GRE receive bandwith test.png Send test across GRE...
by anschluss
Sun Dec 16, 2018 4:05 pm
Forum: RouterBOARD hardware
Topic: RB4011
Replies: 378
Views: 99813

Re: RB4011

https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table#SFP.2B_interface_compatibility_settings_with_SFP_optical_transceivers [..] settings are needed to be set on both linked devices for required interfaces Disable auto negotiation on both ends of link and the flapping will stop (te...