Community discussions

Search found 121 matches

by rafa_lore
Mon Apr 22, 2013 3:28 pm
Forum: Wireless Networking
Topic: "Data from unknown device xx:xx:xx:xx:xx:xx, sent deauth" ?
Replies: 38
Views: 40929

Re: "Data from unknown device xx:xx:xx:xx:xx:xx, sent deauth

Hello
Thanks fuggii, yes I have upgrade every firmware that is in the network! At the moment I didn't have problems! But always happened when I'm not in the office. So I'm waiting if its fail, at the moment every is OK
Thank
Rafael Lore
by rafa_lore
Wed Apr 17, 2013 4:59 pm
Forum: Wireless Networking
Topic: CPE disconnects because "unknown", but in local ACL!
Replies: 7
Views: 1257

Re: CPE disconnects because "unknown", but in local ACL!

Hello I'm having the same problem, but no with Android or similar! I use the Mikrotik node to connect client TP-Link, Edimax and Ubiquiti. And in a lot of node with a lot of Routerboard I'm having the same problem! The client start with this and then stay connected with the node, but stay in Tx/Rx R...
by rafa_lore
Wed Apr 17, 2013 4:34 pm
Forum: Wireless Networking
Topic: Data from unknown device
Replies: 7
Views: 5544

Re: Data from unknown device

Hello I'm having the same problem, but no with Android or similar! I use the Mikrotik node to connect client TP-Link, Edimax and Ubiquiti. And in a lot of node with a lot of Routerboard I'm having the same problem! The client start with this and then stay connected with the node, but stay in Tx/Rx R...
by rafa_lore
Wed Apr 17, 2013 4:29 pm
Forum: General
Topic: Data from unknown device, sent deauth
Replies: 3
Views: 2542

Re: Data from unknown device, sent deauth

Hello I'm having the same problem! I use the Mikrotik node to connect client TP-Link, Edimax and Ubiquiti. And in a lot of node with a lot of Routerboard I'm having the same problem! The client start with this and then stay connected with the node, but stay in Tx/Rx Rate in 1Mbps/1Mbps and can't do ...
by rafa_lore
Wed Apr 17, 2013 4:28 pm
Forum: Wireless Networking
Topic: Wi-Fi on MikroTik RB2011UAS-2HnD-IN
Replies: 42
Views: 24379

Re: Wi-Fi on MikroTik RB2011UAS-2HnD-IN

Hello I'm having the same problem, but no with Android or similar! I use the Mikrotik node to connect client TP-Link, Edimax and Ubiquiti. And in a lot of node with a lot of Routerboard I'm having the same problem! The client start with this and then stay connected with the node, but stay in Tx/Rx R...
by rafa_lore
Wed Apr 17, 2013 4:18 pm
Forum: Wireless Networking
Topic: "Data from unknown device xx:xx:xx:xx:xx:xx, sent deauth" ?
Replies: 38
Views: 40929

Re: "Data from unknown device xx:xx:xx:xx:xx:xx, sent deauth

I'm having the same problem!!! but with a lot of clients. I use TP-Link and Ubiquiti And when its start, nobody can conect. They stay in 1M in Tx/Rx Rate and do nothing
HELPP!!!
Thanks
Rafael Lore
by rafa_lore
Fri Sep 02, 2011 7:33 pm
Forum: Virtualization
Topic: Tor Metarouter
Replies: 9
Views: 13475

Re: Tor Metarouter

Hello I've been looking to implement TOR in my network and I see your WIKI. I have some question: 1 - Which are the different beetwen Bridge and Relay? In a Nat network with PPPoE and 3 ISP, which is better? 2 - Did you have problem with HTTS, VPN? And with Megaupload, RapidShare, etc? Thank you ver...
by rafa_lore
Mon Feb 28, 2011 3:15 pm
Forum: General
Topic: 3 WAN PCC setup with failover example! Comments please!
Replies: 9
Views: 9795

Re: 3 WAN PCC setup with failover example! Comments please!

Thanks!! You said: [I use routing marker since this router is also QoS and in forward chain is making connection marks followed by package markers. You can mark package only once. This way they don't interfere. (You can mark twice, but only last one then is valid)] I ask about it! how do you do this...
by rafa_lore
Sat Feb 19, 2011 12:13 am
Forum: General
Topic: 3 WAN PCC setup with failover example! Comments please!
Replies: 9
Views: 9795

Re: 3 WAN PCC setup with failover example! Comments please!

A question Why do you not insert basic route with a distance bigger? If something is not mark it will not work. I my opinion you must insert: add dst-address=0.0.0.0/0 gateway=pppoe-out1 distance=4 check-gateway=ping add dst-address=0.0.0.0/0 gateway=pppoe-out2 distance=5 check-gateway=ping add dst-...
by rafa_lore
Wed Nov 18, 2009 1:45 am
Forum: General
Topic: Routing with Load Balancing
Replies: 3
Views: 909

Re: Routing with Load Balancing

Thanks fewi
I thing so, but like MKT make miracles, I think that may be a solution for this
Thanks fewi
Rafael Lore
by rafa_lore
Wed Nov 18, 2009 1:00 am
Forum: General
Topic: Routing with Load Balancing
Replies: 3
Views: 909

Routing with Load Balancing

Hello I'm trying to load the traffic of my users with 3 Internet connection, I divided the connections like this: Connection 1 - WAN1: It´s you for all traffic sweepings, like P2P, RapidShare..., ftp, and everything strange. Connection 2 - WAN2: Common connection, but heavy connections, (here is the...
by rafa_lore
Sat Nov 07, 2009 2:12 pm
Forum: Beginner Basics
Topic: Inconsistent Counter Filter! :(
Replies: 5
Views: 866

Re: Inconsistent Counter Filter! :(

JAJAJAJA seguro Maxi, trate de tirarle agua bendita y salio humo, nose si sera porque la estoy exorsizando o se me quemo!!! jajaja
YEs I think that is a bug!!
Thanks
Rafael Lor
by rafa_lore
Fri Nov 06, 2009 6:13 pm
Forum: Beginner Basics
Topic: Inconsistent Counter Filter! :(
Replies: 5
Views: 866

Re: Inconsistent Counter Filter! :(

I upgraded to RO v4.2 and is the same, later I downgraded to 3,24 and continuous equal! Is something with the bridge, just enable it and the counters jump! if work without the bridge is no problem! but I need the bridge, is to do QOS totally transparent! That it could be?
Thanks again
Rafael Lore
by rafa_lore
Fri Nov 06, 2009 5:52 pm
Forum: Beginner Basics
Topic: Inconsistent Counter Filter! :(
Replies: 5
Views: 866

Re: Inconsistent Counter Filter! :(

Well looking the problem I saw that when I disable the bridge, the problem disapear, but I have to use a bridge!!! :(
Normis do you what could happen?
Thank
Rafael Lore
by rafa_lore
Fri Nov 06, 2009 2:13 am
Forum: Beginner Basics
Topic: Inconsistent Counter Filter! :(
Replies: 5
Views: 866

Inconsistent Counter Filter! :(

Hello I'm configuring a RB493 and when I started working in ip firewall filter I saw that counter was extremelly strange. It had count millon of packet!! So I restarted the RB and is the same, its start with the counter with littel number!! :( And not only start with big number also start with NEGAT...
by rafa_lore
Thu Aug 27, 2009 6:14 pm
Forum: General
Topic: OSPF routed PPPOE Network
Replies: 6
Views: 913

Re: OSPF routed PPPOE Network

Hello Did you find a solution to have a OSPF network an the pppoe server in the other extrem? I'm trying the same and I can't :(
I don't want to make a bridge networks!!! I want ro prevent broadcast and strange thinks that happend when you bridge a network
I hope you can help me!!
Thank
Rafael Lore
by rafa_lore
Wed Apr 01, 2009 12:55 am
Forum: Scripting
Topic: Script to identify conficker (virus infected) users
Replies: 43
Views: 18027

Re: Script to identify conficker (virus infected) users

Thanks very much AUG, problems solved
Rafael Lore
by rafa_lore
Tue Mar 31, 2009 7:58 pm
Forum: Scripting
Topic: Script to identify conficker (virus infected) users
Replies: 43
Views: 18027

Re: Script to identify conficker (virus infected) users

Hello As omega-00 told, I have a problem with resolve names, it give an error and the script stop working! How can I solve this problem? I look in the other post and there is not solution! Look this is the problem! :put [:resolve tleksfchxqb.com] failure So when MKT read its, stop working with the s...
by rafa_lore
Fri Feb 27, 2009 11:44 am
Forum: General
Topic: v3.20 Bug Or Hardware failure
Replies: 7
Views: 1138

Re: v3.20 Bug Or Hardware failure

Yes I updated the bios, and I have the same problem!
Yesterday I changed this routerboard with a Server x86, with ROS V 3,20, and sudenly stop working, so to prevent bad moment I downgrade to version 3.11, and is working without problem
Thank
Rafael Lore
by rafa_lore
Fri Feb 27, 2009 12:31 am
Forum: General
Topic: v3.20 Bug Or Hardware failure
Replies: 7
Views: 1138

Re: v3.20 Bug Or Hardware failure

Hello
I'm having the same problem with a RB 43AH, and I asked it in this topic
http://forum.mikrotik.com/viewtopic.php?f=3&t=29759
And as you see, there is no reply!
Rafael Lore
by rafa_lore
Thu Feb 26, 2009 11:54 pm
Forum: General
Topic: Ip firewall for encapsulated PPPoE packets - ROS V3.20
Replies: 3
Views: 679

Re: Ip firewall for encapsulated PPPoE packets - ROS V3.20

Hello mrz
I was studing the graphic and now I have a question:
If I'm not confuse PPPoE encrypt the packets, so how it work in the diagram? its like IPsec? or like a simple routing between ethernet?
thanks!!
Rafael Lore
by rafa_lore
Wed Feb 18, 2009 2:56 pm
Forum: RouterBOARD hardware
Topic: Kernel failure with ROS 3.20 in 433AH
Replies: 3
Views: 1152

Kernel failure with ROS 3.20 in 433AH

Hello My RB433AH that was working with a PPPoE Server in ROS v 3.11 without any problem. When I saw the new changelog of v 3.20 I upgrade it and start working very unstable.I started looking what happend and I saw in terminal a lot of this message: "system,error,critical System rebooted because of k...
by rafa_lore
Wed Feb 18, 2009 2:40 pm
Forum: General
Topic: Ip firewall for encapsulated PPPoE packets - ROS V3.20
Replies: 3
Views: 679

Re: Ip firewall for encapsulated PPPoE packets - ROS V3.20

Thanks is a wonderfull wiki!
Rafael Lore
by rafa_lore
Mon Feb 02, 2009 4:43 pm
Forum: General
Topic: Ip firewall for encapsulated PPPoE packets - ROS V3.20
Replies: 3
Views: 679

Ip firewall for encapsulated PPPoE packets - ROS V3.20

Hello I read what is new in v 3.20 and I saw: "*) allow to use ip firewall for encapsulated PPPoE packets;" This is wonderfull!! Now we can work with PPPoE packets, that ws imposible! An now the question are: 1) where it is in the Packet Flow diagram? 2) how we have to work with its? Thank in advanc...
by rafa_lore
Tue Dec 30, 2008 3:43 am
Forum: General
Topic: PPPoE can't assing IP, it alway uses IP that are used
Replies: 7
Views: 1919

Re: PPPoE can't assing IP, it alway uses IP that are used

Hello
There is not solution for this problem, look this topic that talk about it
http://forum.mikrotik.com/viewtopic.php?f=2&t=25567
I think that is something with the kernel. I hope that MKT Team solve its problem
Bye
Rafael Lore
by rafa_lore
Fri Oct 31, 2008 5:30 pm
Forum: General
Topic: some doubts on Packet Flow Picture
Replies: 2
Views: 680

Re: some doubts on Packet Flow Picture

Thank very much!!
And do you know how can I mark the route to each service?
Thanks
Rafael Lore
by rafa_lore
Fri Oct 31, 2008 6:08 am
Forum: General
Topic: some doubts on Packet Flow Picture
Replies: 2
Views: 680

some doubts on Packet Flow Picture

Hello I'm trying to resolve a big problem that I have looking the Packet Flow picture of the manual, and I found that is missing the result of a condition in the middle of the diagrams. Looks in the picture, there is mark with a red cycle where is the problem. packet_flow.jpg I hope that someone cou...
by rafa_lore
Fri Oct 31, 2008 5:52 am
Forum: General
Topic: Question about PPPoE ans Mark-Route
Replies: 0
Views: 484

Question about PPPoE ans Mark-Route

Hello I'm trying to implement a new work, where the clients will connect to the server ussing PPPoE connections and then deppending in the service (http, ftp, mail, etc) will have different routes. I configurated the PPPoE Server without any problem! My problem appears, when I need to route the traf...
by rafa_lore
Wed Oct 01, 2008 6:13 pm
Forum: General
Topic: very strange 3.x,4.x,5.x freeze and crash with pppoe
Replies: 78
Views: 19922

Re: very strange 3.x freeze and crash with pppoe

Really I'm very unhappy with MKT, because there are a lot of people with this problem and we don't have any solution or something saying that they are working in its!!
At the moment I'm working with this problem in an extremelly unstable network, and I don't know what to say to my client.
Rafael Lore
by rafa_lore
Tue Sep 23, 2008 5:24 pm
Forum: General
Topic: Best practice with pppoe+MTU
Replies: 17
Views: 24957

Re: Best practice with pppoe+MTU

Hello
The best MTU you have to find for your networks, Look this page
http://help.expedient.com/broadband/mtu_ping_test.shtml
or
http://www.dslreports.com/faq/5793

Bye
Rafael Lore
by rafa_lore
Mon Sep 15, 2008 2:58 am
Forum: General
Topic: PPPOE DIE even on 3.13
Replies: 50
Views: 9596

Re: PPPOE DIE even on 3.13

Hello I don't have any VAP, in the server where I have PPPoE, is only PPPoE Server with a public interface and an internal interface. I have done this configuration to other people and works perfectly!!!. And when I do to my network its CHASH :shock: . I think that are some situation that occurs tha...
by rafa_lore
Sat Sep 13, 2008 8:07 pm
Forum: General
Topic: QoS with PPPoE
Replies: 4
Views: 1583

Re: QoS with PPPoE

Hello well here is the link where explain how to make QoS with PPPoE http://wiki.mikrotik.com/wiki/Queue_with_Masquerading_and_Internal_Web-Proxy I started doing like explain its, and now I'm only work in mangle with prerouting. If you want help tell me that I pass my email and start working Rafael ...
by rafa_lore
Fri Sep 12, 2008 7:54 pm
Forum: General
Topic: PPPOE DIE even on 3.13
Replies: 50
Views: 9596

Re: PPPOE DIE even on 3.13

That is true!! there is not solution to ower problem!! If you want normis I give full access to a MKT that present its problems. I think that the problems is the communication between MKT and Radius Server
Thanks
Rafael Lore
by rafa_lore
Thu Sep 11, 2008 4:28 pm
Forum: General
Topic: QoS with PPPoE
Replies: 4
Views: 1583

Re: QoS with PPPoE

Hello
Look iin MKT wiki, there is a way to do what you are looking
Rafael Lore
by rafa_lore
Thu Sep 11, 2008 4:09 pm
Forum: General
Topic: very strange 3.x,4.x,5.x freeze and crash with pppoe
Replies: 78
Views: 19922

Re: very strange 3.x freeze and crash with pppoe

Well all of us are looking to solve the same problem.
I tried everything that you say and nothing. Change hardware, reconfigured, change version of RouterOS, and the same.
As you said, I'm using a FreeRadius Server
Well we hope that its problem will be resolved in v 3.14
Good Luck MKT Team
Rafael Lore
by rafa_lore
Thu Sep 11, 2008 4:05 pm
Forum: General
Topic: 3.13 crashing on x86
Replies: 2
Views: 1836

Re: 3.13 crashing on x86

I'm another MKT Users that have the same problems!!! and I came trying everything to solve its and nothing. If someone know how to solve it, please HELP US!!
Rafael Lore
by rafa_lore
Thu Sep 11, 2008 3:39 pm
Forum: General
Topic: PPPoE can't assing IP, it alway uses IP that are used
Replies: 7
Views: 1919

Re: PPPoE can't assing IP, it alway uses IP that are used

Hello thanks in the help!! I'm using RouterOS v 3.13, and also I tried with v 3.11. And about you ask sergejs: Wait, why there are two clients who use the same IP address ? I ask the same, because MKT give this IP automatically from the pool Do you have big enough address-pool, that all clients can ...
by rafa_lore
Wed Sep 10, 2008 9:43 pm
Forum: General
Topic: PPPOE DIE even on 3.13
Replies: 50
Views: 9596

Re: PPPOE DIE even on 3.13

No no!! This reemplace only extended the agony by three hours, and the crashed!!! If I restarted the RB, died again, so I came back to my old configuration!! The problems appears to me, when I use Public IP Address, but if I give my client Private IP Address and then make a masquerade in the Server,...
by rafa_lore
Wed Sep 10, 2008 8:24 pm
Forum: General
Topic: PPPOE DIE even on 3.13
Replies: 50
Views: 9596

Re: PPPOE DIE even on 3.13

Hello I'm having the same PROBLEM!!! and I said its in other post!!. Is exactly like all of you say, I client can work perfect and when it start have a lot of connections, the PPPoE Server close that connections, and the only way to solve this problems is to reconnect the user, but imagine, to expla...
by rafa_lore
Wed Sep 10, 2008 7:12 pm
Forum: General
Topic: PPPoE can't assing IP, it alway uses IP that are used
Replies: 7
Views: 1919

PPPoE can't assing IP, it alway uses IP that are used

Hello Like I'm contineous writting, I'm implementing an PPPoE server with Public IP address, and now I have a little problem. :( When a client try to connect the PPPoE Server accept the connection, and give an IP of the pool-address, that it's used, and then kill that client. Look I will paste the l...
by rafa_lore
Wed Aug 20, 2008 3:48 pm
Forum: General
Topic: Strange problem with Proxy and PTP
Replies: 9
Views: 1746

Re: Strange problem with Proxy and PTP

Hello I think that I confuse when you said: WebProxy in v3 may use your internal IP address for public connections - this bug is known (at least upto v3.11) but may be still not solved since early v3.x... I understood that MKT have a mistake or a hole, and won't works with Public IP address. And wit...
by rafa_lore
Wed Aug 20, 2008 4:52 am
Forum: General
Topic: PPPoE +Publics IP + ARP questions!
Replies: 0
Views: 673

PPPoE +Publics IP + ARP questions!

Hello everybody!! I have some dude about PPPoE and ARP with public IPs. :? At the moment, I have my Wireless Networks, with a PPPoE server giving internal IPs, and I'm trying to change it, to have in each AP a PPPoE server (thanks to the advantages of MKT). I have configure a Linux with Freeradius a...
by rafa_lore
Tue Aug 19, 2008 7:42 pm
Forum: General
Topic: Strange problem with Proxy and PTP
Replies: 9
Views: 1746

Re: Strange problem with Proxy and PTP

Hello To wait that MKT Team solve this problem!! Is bad to think that? :? Sorry that I bother you, what I tried to make a Public network, I give to my clients "Public IPs", so I don't have to make NAT. And when you said: so add that rule with 'src-address=router_internal_ip' What do you mean? to the...
by rafa_lore
Tue Aug 19, 2008 3:15 pm
Forum: General
Topic: Strange problem with Proxy and PTP
Replies: 9
Views: 1746

Re: Strange problem with Proxy and PTP

Hello
I didn't tried that rule because I'm ussing public IP.
But you said what is my problem
WebProxy in v3 may use your internal IP address for public connections
I didn't know that, so I have to wait
Thanks a lot!!!
Rafael Lore
by rafa_lore
Tue Aug 19, 2008 4:41 am
Forum: General
Topic: Strange problem with Proxy and PTP
Replies: 9
Views: 1746

Re: Strange problem with Proxy and PTP

Hello Chupaka
Thanks!!! Always helping me!!! Thanks a lot!!!
Not I don't need that rule because I'm using Public IP, so I make only a ip route and nothing more. Now I have some class C of IP, so I'm trying to implement its.
Another idea?
Thanks
Rafael Lore
by rafa_lore
Sun Aug 17, 2008 12:57 am
Forum: General
Topic: Strange problem with Proxy and PTP
Replies: 9
Views: 1746

Strange problem with Proxy and PTP

Hello everybody I'm writting to ask, if somebody had the same problem that I will describe: Well, at the moment, I have a wireless point to point, configurated in bridge mode in ROS 2.9.46, where I transport the Internet to another place where I have two MKT PPPoE Server in ROS 3.11, where I have PP...
by rafa_lore
Wed Aug 13, 2008 4:43 pm
Forum: General
Topic: How can I see if my micro-sd is working in a RB433AH
Replies: 3
Views: 2392

Re: How can I see if my micro-sd is working in a RB433AH

Yes sorry I'm using RB433AH
When I use this command said:
/ip proxy check-drive micro-sd
drive will be checked shortly
And nothing more!!
Thanks!!
Rafael Lore
by rafa_lore
Wed Aug 13, 2008 5:32 am
Forum: General
Topic: How can I see if my micro-sd is working in a RB433AH
Replies: 3
Views: 2392

How can I see if my micro-sd is working in a RB433AH

Hello I'm changing all my Routerboard with RB433AH. And I bougth 2 Gb micro-sd Kingston. I was reading in this forum the compatibility with the micro-sd and in some place said that could works and in other not!! So, how can I see if it recognized?? :? If I go to "ip --> proxy --> webproxy settings" ...
by rafa_lore
Thu Jul 17, 2008 5:26 pm
Forum: General
Topic: Problems with Web-Proxy in 3.11
Replies: 3
Views: 980

Re: Problems with Web-Proxy in 3.11

Thanks!!!
Its start working!!! thank you very much
Rafael Lore
by rafa_lore
Wed Jul 16, 2008 9:47 pm
Forum: General
Topic: Problems with Web-Proxy in 3.11
Replies: 3
Views: 980

Problems with Web-Proxy in 3.11

Hello everybody I'm having a problem with the proxy in version 3.11. I used to works with 3.0RC14 and the proxy works well. Now I update to version 3.11, because in pppoe, now, I have the option to insert automatic the client that connect to the address-list, intested of do it with a script. That wo...
by rafa_lore
Wed Apr 23, 2008 3:26 pm
Forum: General
Topic: PPPoE Server + Layer 7 CRASH!!!
Replies: 9
Views: 1335

Re: PPPoE Server + Layer 7 CRASH!!!

hello sergejs When I disable L7 it's start working wonderfull!!! without any problems. What I did is to enable only SkyPe Regexpr, and work!!! I have this MKT in a big server, 1 GB of RAM, core 2 dou, so is not that the machine can support its!!! When work with L7 the processor is only in 20 %, but ...
by rafa_lore
Tue Apr 08, 2008 3:09 pm
Forum: General
Topic: MKT PPPoE + Freeradius without MySql
Replies: 6
Views: 3295

Re: MKT PPPoE + Freeradius without MySql

Thanks!!
I resolved it, using a profile in the MKT, so from it take the paramaters that I don't assing
Rafael Lore
by rafa_lore
Thu Apr 03, 2008 2:20 am
Forum: General
Topic: MKT PPPoE + Freeradius without MySql
Replies: 6
Views: 3295

Re: MKT PPPoE + Freeradius without MySql

Hello Rafiq
Do you know how to assing the Remote-IP
thank
Rafael Lore
by rafa_lore
Tue Apr 01, 2008 3:29 pm
Forum: General
Topic: MKT PPPoE + Freeradius without MySql
Replies: 6
Views: 3295

Re: MKT PPPoE + Freeradius without MySql

Thanks Rafiq
And do you know, which is the paramater for the freeradius to indicate the Remote-IP
Thank
Rafael Lore
by rafa_lore
Mon Mar 31, 2008 10:10 pm
Forum: General
Topic: MKT PPPoE + Freeradius without MySql
Replies: 6
Views: 3295

Re: MKT PPPoE + Freeradius without MySql

Trying adn trying, I pass that error!!! The only things that I did was in the MKT PPPoE Server, use only authentication PAP, in the /etc/freeradius/user add the name of the pool that is in the MKT But know stop in another place. The FreeRadius stop in Sending Accounting-Responde of id 54 to x.x.x.x ...
by rafa_lore
Mon Mar 31, 2008 8:33 pm
Forum: General
Topic: MKT PPPoE + Freeradius without MySql
Replies: 6
Views: 3295

MKT PPPoE + Freeradius without MySql

Hello, I'm trying to configure a radius Server with FreeRadius, but without MySQL. What I want is to use the user of Linux. It's possible? I configurated my MKT and the Freeradius Server, thay are working. The MKT send the request to the Freeradius, but I can login!!. My problems is how I configurat...
by rafa_lore
Wed Mar 26, 2008 9:27 pm
Forum: General
Topic: PPPoE Server + Layer 7 CRASH!!!
Replies: 9
Views: 1335

PPPoE Server + Layer 7 CRASH!!!

Hello I want to know if I'm the only one who have problem with Layer 7. When MKT start working with its I tried and crashed. Yesterday I again implemented the mangle packet with Layer 7, and mangle fantastic, queue tree work excelent. But in some moment the server PPPoE start killing clients and the...
by rafa_lore
Wed Mar 26, 2008 9:17 pm
Forum: General
Topic: proxy doesnt work well in v3.6
Replies: 15
Views: 1771

Re: proxy doesnt work well in v3.6

Well lets see, My configuration is different, first of all I redirect the traffic to my proxy with 3 X ;;; toda la red x.x.x.x/y redirect proxy chain=dstnat action=redirect to-ports=8080 src-address=x.x.x.x/y dst-port=80 protocol=tcp and then I masquarade: ;;; basic nat sobre red x.x.x.x/y chain=src...
by rafa_lore
Wed Mar 26, 2008 3:49 pm
Forum: General
Topic: proxy doesnt work well in v3.6
Replies: 15
Views: 1771

Re: proxy doesnt work well in v3.6

hi Rudy And how do you it works? do you have this roule in Ip firewall nat: 3 X ;;; toda la red 10.10.0.0/16 redirect proxy chain=dstnat action=redirect to-ports=8080 src-address=10.10.0.0/16 dst-port=80 protocol=tcp 4 ;;; basic nat sobre red 10.10.0.0/16 chain=srcnat action=masquerade src-address=1...
by rafa_lore
Wed Mar 26, 2008 3:26 pm
Forum: General
Topic: Web-Proxy doesn't works in 3.4, 3.6, so I have to use 3.14RC
Replies: 0
Views: 409

Web-Proxy doesn't works in 3.4, 3.6, so I have to use 3.14RC

Hello everybody Last week I upgraded my routeros from 3.14RC to 3.4 and the web-proxy didn't work, so I downgraded. Today again to 3.6, and the same!!! I think I've the nat roules well, because when I downgrade start works. I have to do something special with this version? Or which version do you th...
by rafa_lore
Wed Mar 26, 2008 3:00 pm
Forum: General
Topic: proxy doesnt work well in v3.6
Replies: 15
Views: 1771

Re: proxy doesnt work well in v3.6

Hello!!
It's true that web-proxy doesn't work. Recently I upgrade to routeros 3.6 from3.14 RC. an doesn't workssss!!!
If I downgrade its start work, and with the new version not!!!
someone know what happend!!
Thanks
Rafael Lore
by rafa_lore
Tue Mar 11, 2008 2:53 pm
Forum: General
Topic: HotSpots user priorization
Replies: 6
Views: 1328

Re: HotSpots user priorization

I recently read your wiki and is wonderfull, thank!!
I not only implemented it in HotSpot, yesterday I changed fully a PPPoE with its!!! and is working
Thanks
Rafael Lore
by rafa_lore
Mon Mar 10, 2008 3:30 pm
Forum: General
Topic: Prioritising traffic by Hotspot user profile
Replies: 3
Views: 1030

Re: Prioritising traffic by Hotspot user profile

hello
today give me the solution, look in
http://forum.mikrotik.com/viewtopic.php ... 53#p106953
I think that it will works
Rafael Lore
by rafa_lore
Mon Mar 10, 2008 3:28 pm
Forum: General
Topic: HotSpots user priorization
Replies: 6
Views: 1328

Re: HotSpots user priorization

Alaa Tahnks you very much!!!!!!!!!!!!!!!!!!!!!
I didn´t know that I can use its in the part of speed
Thank again!!!
Rafael Lore
by rafa_lore
Mon Mar 10, 2008 4:58 am
Forum: General
Topic: HotSpots user priorization
Replies: 6
Views: 1328

HotSpots user priorization

Hello everybody All the day I was trying doing something this hotspot that in PPPoE is simple. I have different users profile, which basically give the speed to the clients. I have free users, 512kbps users and 1024kbps user. I want to give priorization to thats groups, so the 1024k groups have the ...
by rafa_lore
Mon Mar 10, 2008 4:19 am
Forum: General
Topic: Prioritising traffic by Hotspot user profile
Replies: 3
Views: 1030

Re: Prioritising traffic by Hotspot user profile

Hello I have been trying find old he day the problem that you describe, and I couldn't solve. How do you do it? I have a similar scence, where I have the free client, and other client with diferent speed
Thank
Rafael Lore
by rafa_lore
Sat Mar 08, 2008 1:06 am
Forum: General
Topic: Upgrade License
Replies: 26
Views: 3575

Re: Upgrade License

Hello what say hulk-bd is really true, the support of MKT is wonderfull, thankssss
What I only did is to ask if it's possible to transfer the license.
Bye and forget the problems
Rafa
by rafa_lore
Thu Mar 06, 2008 2:34 pm
Forum: General
Topic: Upgrade License
Replies: 26
Views: 3575

Re: Upgrade License

Hello Like say jcremin, gmsmstr you are so confuse!!! We are people that works, do what we can!! and not have a lot of money to buy license everytime!!! Paying U$S 250 and the other license (U$S 45) is too expensive!! Well I think I'll have to buy a new one, but I want to use that disk!! How can I t...
by rafa_lore
Tue Mar 04, 2008 7:24 pm
Forum: General
Topic: Upgrade License
Replies: 26
Views: 3575

Re: Upgrade License

Yes like say hulk-bd pay only teh upgrade!!!!
And How can I do the transfer license? so I continue using this disk with the server and I use L4 in another
Rafael Lore
by rafa_lore
Tue Mar 04, 2008 2:02 pm
Forum: General
Topic: Upgrade License
Replies: 26
Views: 3575

Re: Upgrade License

But the "old disk" have only 2 month!!! and is a wonderfull disk, is a IBM
by rafa_lore
Tue Mar 04, 2008 1:22 am
Forum: General
Topic: Upgrade License
Replies: 26
Views: 3575

Re: Upgrade License

Thank MAXI o pongo gracias nomas!!!
And how I do to recover that license, to use on another disk?
Rafael Lore
by rafa_lore
Mon Mar 03, 2008 8:36 pm
Forum: General
Topic: Upgrade License
Replies: 26
Views: 3575

Upgrade License

Hello MKT Team
Like 2 month I installed a License level 4 in a new server, I now I have more that 150 clients, It's possible to upgrade the license to level 6? I have the actual license in a IBM server with an originally disk, so I want to continue using that disc.
Thanks
Rafael Lore
by rafa_lore
Sat Jan 19, 2008 11:55 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello
Try disabling the multi-procesor
system multi-procesor=no
I solved with this
Rafael Lore
by rafa_lore
Sun Jan 13, 2008 8:17 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello Jorge
I think that my principal problem is that I used multiprocesor active.
During this week I will try to active the layer 7, and that I will post here
bye
Rafael Lore
by rafa_lore
Thu Jan 10, 2008 1:43 pm
Forum: General
Topic: RouterOS stop working with a Server PPPoE in RC13
Replies: 4
Views: 854

Re: RouterOS stop working with a Server PPPoE in RC13

Problem RESOLVED!!!
Janis told that I had to disable multi-procesor and tried without Layer 7, and now is working PERFECTLY, since 2 day I don't have any problems!!!!
Thanks everybody
Rafael Lore
by rafa_lore
Thu Jan 10, 2008 1:43 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Problem RESOLVED!!!
Janis told that I had to disable multi-procesor and tried without Layer 7, and now is working PERFECTLY, since 2 day I don't have any problems!!!!
Thanks everybody
Rafael Lore
by rafa_lore
Tue Jan 08, 2008 2:55 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello Normis
Today I have done all test of the hiren boot CD, and no error was found. I tested RAM, DISK, PROCESSOR, and that test thar probe everything!! So the Server is OK
Thank
Rafael Lore
by rafa_lore
Tue Jan 08, 2008 12:45 am
Forum: General
Topic: RouterOS stop working with a Server PPPoE in RC13
Replies: 4
Views: 854

Re: RouterOS stop working with a Server PPPoE in RC13

Hi Chupaka !!
Yes I'm using Web-Proxy. Also PPPoE server, Mangle with Layer 3 and 7, and Queue tree
Do you think that the Web-Proxy is the problem?
Regards,
Rafael Lore
by rafa_lore
Mon Jan 07, 2008 2:36 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello Normis.
Yes I'm sure because, this server was working like 3 months with windows 2003 without problems, but perhaps it broke, so today I will make a full control, with some program.
Thanks Normis
Rafael Lore
by rafa_lore
Sat Jan 05, 2008 5:22 am
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

NOTTTTTTTTTTTTT!!!!!!!!!!!!!!! :( Is the same!!! With RC9 its stop working, The only thing that is better, is that with RC13 its stop working 5 times in a day, and with RC9 stop only 2 times!!!! But its stop!!, and my client will kill me!! :? I'll wait that the MKT Team resolve a license that I lose...
by rafa_lore
Thu Jan 03, 2008 5:58 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello everybody
I solve parts of the problem. I got back to RC9, and now is more stable. Now the server always respond. The only strange that it do, is to suddenly disconect every client, and I have to restart to permit that they conect. Someone know WHY?
Thanks
Rafael Lore
by rafa_lore
Mon Dec 31, 2007 5:52 am
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello!! Happy New Year!!!!
Sorry I don't understand you, when you said:
Use maximum RAM of 512MB
Now I have 1 Gb of RAM, so you say that I have to extrat a module and have only 512? I have to manange like about 170 client!!
Thank you
Rafael Lore
by rafa_lore
Sat Dec 29, 2007 4:13 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello
First of all I use with multiprocessor support turned off and the processor was at 100% the I activated and down to 40 %
Thank
Rafael Lore
by rafa_lore
Fri Dec 28, 2007 9:22 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Hello
I tried 13, 12, 11 and 10. A friend tall me that he have 170 client with a RC9, so I will tried it
Thank
Rafael Lore
by rafa_lore
Thu Dec 27, 2007 6:20 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

Re: RouterOS RC13 stop working

Yes exactly!!!!
I tried with other RouterOS v3, and is the same!! We will need to forget Layer 7, the reason that I upgrade!!!
MKT Team, do you know why its happening?
thank
Rafael Lore
by rafa_lore
Thu Dec 27, 2007 3:04 pm
Forum: General
Topic: RouterOS RC13 stop working
Replies: 23
Views: 3848

RouterOS RC13 stop working

Hello everybody I'm using a Server IBM, with 1 GB of RAM and a processor of Dual 2 Core, with RC13 to serve 150 pppoe connections. But it have a problem, randomly the RouterOS stop works!! I can’t see the router via network, and I tried ingress via console, and nothing. The only way that it respond ...
by rafa_lore
Thu Dec 27, 2007 2:56 pm
Forum: General
Topic: RouterOS stop working with a Server PPPoE in RC13
Replies: 4
Views: 854

RouterOS stop working with a Server PPPoE in RC13

Hello everybody I'm using a Server IBM, with 1 GB of RAM and a processor of Dual 2 Core, with RC13 to serve 150 pppoe connections. But it have a problem, randomly the RouterOS stop works!! I can’t see the router via network, and I tried ingress via console, and nothing. The only way that it respond ...
by rafa_lore
Tue Dec 25, 2007 12:12 am
Forum: General
Topic: IDE Flash stop!! and lose my License!!
Replies: 5
Views: 796

Re: IDE Flash stop!! and lose my License!!

Thank UniKyrn!!! Yes looking that I won't have a quickly respond, I will buy a new one, and continous figthing, that they recognise the license that I bought. The Flash that is broke is a IDE Flash that sell MKT, so is an originally from MKT. But If they say me that I have to send they the flash, as...
by rafa_lore
Mon Dec 24, 2007 9:23 pm
Forum: General
Topic: IDE Flash stop!! and lose my License!!
Replies: 5
Views: 796

Re: IDE Flash stop!! and lose my License!!

Thank andrewluck!! Yes I send a email to support, but they send me a request me and say: "There might be no answer to your ticket, if it has been submitted without supout.rif file attached. To get your request answered, please reply to this e-mail with the supout.rif file attached." But I formated t...
by rafa_lore
Mon Dec 24, 2007 4:41 am
Forum: General
Topic: IDE Flash stop!! and lose my License!!
Replies: 5
Views: 796

IDE Flash stop!! and lose my License!!

Hello everybody First of all Merry Christmas!!! I'd bougth a IDE Flash with the licence incorporated since 6 month, and was working fantasting. Today suddenly it stop!! A see the monitor and say boot sector broken!!! so I read sometime, that the licence is keep in the disk, so I downloaded the Route...
by rafa_lore
Fri Dec 07, 2007 8:39 pm
Forum: General
Topic: User Manager and PPPoE
Replies: 1
Views: 479

User Manager and PPPoE

Hello Everybody I'm writing to ask how many user with PPPoE can I manage with User Manager and with mikrotik only, so with winbox. I've a licence 4 and my client connect with the server via PPPoE. I want manage like about 250 user and if its posible with user manager, so which licence I need, for Us...
by rafa_lore
Tue Dec 04, 2007 2:23 pm
Forum: General
Topic: mark connection or mark packet with Layer 7
Replies: 4
Views: 994

Re: mark connection or mark packet with Layer 7

Thank you very much Sergejs
Wonderfull, I will Mark the connection with L7 and somethings with L3, and the mark the packet that have that mark connection
Thank
Rafael Lore
by rafa_lore
Tue Dec 04, 2007 4:15 am
Forum: General
Topic: Layer 7, can't mangle
Replies: 3
Views: 1160

Re: Layer 7, can't mangle

Someone can help me PLEASE!!!!!!!!
by rafa_lore
Tue Dec 04, 2007 4:07 am
Forum: General
Topic: PCQ and prioritizing
Replies: 17
Views: 2865

Re: PCQ and prioritizing

Well if you want to do this look tis page
http://www.butchevans.com/readarticle.php?article_id=15
It's was my first idea, but is so difficult so I made only simple queue tree. Please if you make it work TELL ME!!!
Is a wonderfull idea, you can work in each clients
Rafael Lore
by rafa_lore
Tue Dec 04, 2007 1:42 am
Forum: General
Topic: PCQ and prioritizing
Replies: 17
Views: 2865

Re: PCQ and prioritizing

Hello
If I thing that I'm undestanding, you forget to insert the max limit and Limit at, like in the next picture
queue tree.jpg
Well I hope it help you
Rafael Lore
by rafa_lore
Mon Dec 03, 2007 10:36 pm
Forum: General
Topic: mark connection or mark packet with Layer 7
Replies: 4
Views: 994

mark connection or mark packet with Layer 7

Hello everybody I want to know you experience with L7. The question is how to works in mangle: 1 - Someone say that first we have to mark the connections and finally the packet 2 - Another say that we only have to mark the packet to work with L7 Which is the best way to works? Normis what do you say...
by rafa_lore
Mon Dec 03, 2007 10:31 pm
Forum: General
Topic: PCQ and prioritizing
Replies: 17
Views: 2865

Re: PCQ and prioritizing

Hello Chupaka
I don't undestand you, but I think that you are forgetting to say the parent queue to that queue you create at final.
Rafael Lore
by rafa_lore
Sun Nov 18, 2007 6:04 pm
Forum: General
Topic: PPPoE Server + Proxy
Replies: 4
Views: 1304

Re: PPPoE Server + Proxy

Hello I couldn't wait this afternoom. I tried what you say Chupaka and is OK, it worked, Thank But I have another question!! What happend if I have 3 ethernet card, where the configuration is this: 1 - DEDICADO, where I have my principal access to internet 2 - ADSL, where I have an access of xDSL to...
by rafa_lore
Sun Nov 18, 2007 5:45 pm
Forum: General
Topic: PPPoE Server + Proxy
Replies: 4
Views: 1304

Re: PPPoE Server + Proxy

Thank you very much!!!
this afternoom I'll try this, I think thas is my problem
Thank
Rafael Lore
by rafa_lore
Sun Nov 18, 2007 1:57 am
Forum: General
Topic: NTP client dosn't work....
Replies: 3
Views: 1163

Re: NTP client dosn't work....

Hello
Sorry I will make a stupid question!!
In ip firewall filter, do you enable the port 123, to permit pass the ntp protocol?
I had the same problem and I solve it making a rule to enable pass this port
Bye
Rafael Lore
by rafa_lore
Sun Nov 18, 2007 1:54 am
Forum: General
Topic: PPPoE Server + Proxy
Replies: 4
Views: 1304

PPPoE Server + Proxy

Hello everybody!! I'm making a PPPoE server with proxy, the client can connect without problem to the pppoe server and can use internet perfectly. But I want to use the proxy and it is imposible. In IP FIREWALL NAT I have this rules: [admin@MikroTik] /ip firewall nat> print Flags: X - disabled, I - ...
by rafa_lore
Sun Nov 04, 2007 10:21 pm
Forum: General
Topic: Layer 7, can't mangle
Replies: 3
Views: 1160

Layer 7, can't mangle

Hello I'm writting to ask what I'm doing wrong because I tried everythink with layer 7 and I can make it work!!! First of all I introduce the script of the page http://www.mikrotik.com/download/l7-protos.rsc to insert the layer 7 rule. The I make this rule: 0 ,,,HTTP - Layer 7 chain=prerouting src-a...
by rafa_lore
Sun Nov 04, 2007 9:37 pm
Forum: General
Topic: why 2 pppoe-server??
Replies: 4
Views: 734

Re: why 2 pppoe-server??

Hello I think that you can only have a pppoe server for each interface, an principaly if you use pppoe server without name
Bye
Rafael Lore
by rafa_lore
Tue Oct 30, 2007 3:29 am
Forum: General
Topic: Mangle & queue MESSENGER stuff
Replies: 4
Views: 1013

Re: Mangle & queue MESSENGER stuff

Hola Capo si es posible con layer 7 no hace falta marcar la conexion de una marcas el paquete y listo
En ingles - In english Hello, yes it's possible you only have to mark the packet, it's not necesary mark the conecttion
Thank
Bye
Rafael Lore
by rafa_lore
Tue Oct 09, 2007 4:52 am
Forum: General
Topic: Traffic Prioritization with Queue trees
Replies: 5
Views: 2935

Re: Traffic Prioritization with Queue trees

HI Alex
I think that is better to make a QUEUE TREE mother of download and upload, and then inserting the other queue depending of that queue mother
Look for in yhe wiki and you will see a better example
Bye
Rafael Loré
by rafa_lore
Sun Oct 07, 2007 7:50 pm
Forum: The User Manager
Topic: Language support
Replies: 50
Views: 22391

Re: Language support

It would be a good option. But I want to use in the original language, because in the translation sometime the meanin of something is different.
If you want normis I can help you with the translaction in spanish.
Rafael Loré
by rafa_lore
Sun Oct 07, 2007 7:36 pm
Forum: General
Topic: antispam
Replies: 13
Views: 2999

Re: antispam

I've not do it with pppoe, buy look the script and you will see watch you have to change
by rafa_lore
Sat Oct 06, 2007 6:44 pm
Forum: Wireless Networking
Topic: Link becoming unavailable
Replies: 4
Views: 702

Re: Link becoming unavailable

No, because I use client of diferent type of AP,
by rafa_lore
Sat Oct 06, 2007 6:42 pm
Forum: General
Topic: antispam
Replies: 13
Views: 2999

Re: antispam

Well change the hotspot variable for what you want in PPPoE
by rafa_lore
Sat Oct 06, 2007 1:11 am
Forum: Wireless Networking
Topic: Link becoming unavailable
Replies: 4
Views: 702

Re: Link becoming unavailable

Something similiar pass me with an two AP's that was working like a year. I solved it doing a reset-configuration, and configurating manually again, not using a backUp. And since 6 month is working withuot problems
I hope it help you
Bye
Rafael Lore
by rafa_lore
Sat Oct 06, 2007 12:02 am
Forum: General
Topic: antispam
Replies: 13
Views: 2999

Re: antispam

Hello!!
Like say MRZ, look for in the Wiki, there is an articule written by Alessio that explain how to make an AntiSpam with a server HotSpot
Good Bye
Rafael Lore
by rafa_lore
Fri Oct 05, 2007 3:11 pm
Forum: General
Topic: I can't mangle packet with Layer 7
Replies: 4
Views: 2678

Re: I can't mangle packet with Layer 7

Thank Boy for your request!!! But normis, I don´t undestand you, I want to use Mangle, becuase then I will use QUEUE TREE!!. If I drop you know how be my telephone :D And another thing, mrz you say me that I have to use in forward, but I want to use different gateway for some traffic, example P2P. I...
by rafa_lore
Fri Oct 05, 2007 1:40 am
Forum: General
Topic: I can't mangle packet with Layer 7
Replies: 4
Views: 2678

I can't mangle packet with Layer 7

Hello everybody I'm studding Layer 7 with MKT, becuase is something WONDERFULL. I ask it in the MUM of Argentina, and they say me A GOOD QUESTION and nothing more. And now appears!!! But I've some problems.... :( I insert in /ip firewall layer7-protocol the instructions that are in http://www.mikrot...
by rafa_lore
Sun Sep 16, 2007 11:18 am
Forum: General
Topic: HotSpot with MAC Authentication and Web-Proxy
Replies: 1
Views: 559

HotSpot with MAC Authentication and Web-Proxy

Hello everybody, Before anything, it wanted to be thankful to Mikortiks people by the MUM organized in Argentina!!! Well in the MUM, Alessio talked about HOTSPOT, and we asked if it posible to connect to it with a router and he told that is possible and we had to insert the MAC Address insted of use...
by rafa_lore
Fri Jun 01, 2007 10:31 pm
Forum: Wireless Networking
Topic: Wireless with temperature at -20° C
Replies: 1
Views: 539

Wireless with temperature at -20° C

Hello everybody I want to ask if someone can help in prepare a wireless system that will be mount in a place that the temperature is around -20° C. I don't know if I have to insert a heating system, or the routerboard will work with out it? Maxi show me a photography in where the tower this snow cov...
by rafa_lore
Wed May 09, 2007 10:59 pm
Forum: General
Topic: 2 - Problems for the installation of a RouterOS in a PC
Replies: 3
Views: 874

2 - Problems for the installation of a RouterOS in a PC

Continuing with the previous subject that it was blocked. Of course I want to use legitimal RouterOS I tried first with the free version so when it manages to make it walk, to buy the license. Because in the test if I can´t I format the disk I perhap I can loose the license. I think that buying the ...
by rafa_lore
Wed May 09, 2007 3:19 pm
Forum: General
Topic: Problems for the installation of a RouterOS in a PC
Replies: 7
Views: 1220

Hi
I say that "I tried it, with the free version that you can download from the WEB" so this is a newest version, so 2.9.42. I beging with it!
To tried I used the older version
Rafael Lore
by rafa_lore
Tue May 08, 2007 11:36 pm
Forum: General
Topic: Problems for the installation of a RouterOS in a PC
Replies: 7
Views: 1220

Hello Thank very much for your answer. Yes, the only think that I have connected to the computer is the master disk and the slave CDROM. Both are in IDE1, and the disk is in MASTER. About the order of boot first is the disk and in second place the cdrom, so when I want to boot from the CD I've to or...
by rafa_lore
Tue May 08, 2007 10:43 pm
Forum: General
Topic: Problems for the installation of a RouterOS in a PC
Replies: 7
Views: 1220

Problems for the installation of a RouterOS in a PC

Hello I what to ask if someone can help me to solve a problem that I've during the installation a RouterOS in a PC. I tried to install a Router to improve a balancing of two Internet connection that I have. I tried it, with the free version that you can download from the WEB. I what to play everythi...
by rafa_lore
Tue Apr 17, 2007 5:31 am
Forum: General
Topic: winbox Crash
Replies: 7
Views: 1619

It happend to me when I use the Winbox for MAC Address. Try using the IP. To the first configuration use NeighborViewer
I hope you resolve the problem
Good Luck
Rafael Loré