MikroTik

neu

It seems to be your Radius Reply message order was reversed.
This has to be fixed at RADIUS side not in Mikrotik RouterOS side.
You may refer your Radius Documentation.

Or you may try this RADIUS cum CRM package called neuCRM http://neucrm.com

neu

Poor signal strength Or interference is also the reason for switching in to 6Mbps data rates.

neu

This may happen, and it will take some time to update the usage. Usage statistics are being updated periodically over per-defined time interval.
If update interval set to 5minutes, your usage statistics shows 5 minutes delayed status only.

neu

There is a excellent documentation with examples, please refer
https://aacable.wordpress.com/2011/07/2 ... t-by-zaib/
it is more informative. And i have tested, it works fine.

neu

Consider using $(username)

neu

add action=dst-nat chain=dstnat comment="DMZ forward" dst-address-type="" to-addresses=192.168.1.101 to-ports=80 in the above line of code you haven't specified neither in-interface nor wan ip-address. my working NAT configuration is : /ip firewall nat add action=dst-nat chain=dstnat comment="web s...

neu

/ip firewall nat add action=dst-nat chain=dstnat comment="Web server A" in-interface=ether1 \ dst-port=80 protocol=tcp to-addresses=192.168.1.10 to-ports=80 /ip firewall nat add action=dst-nat chain=dstnat comment="Web server B" in-interface=ether1 \ dst-port=8080 protocol=tcp to-addresses=192.168....

neu

Tried Deleting via Winbox ?

neu

WAN network IP and LAN network IP ( any 2 network IP) could not be same. You are breaking the networking rule.
Plan for different network IP address.

neu

Your connectivity is little confusing. I assumed you are using ADSL 4 LAN port modem for Internet, and from LAN1 your connecting Mikrotik Router. And LAN2 - LAN 4 you are connecting other nodes. If you are setting Modem in Bridge mode, your Mikrotik has to initiate the PPPoE connection and get Publi...

neu

This problem can be for many reasons, security key in your wireless profile, interference, poor signal, channel overload, access list restriction.

I hope this will some how helpful: https://wiki.mikrotik.com/wiki/Manual:W ... Debug_Logs

neu

Please ensure your data is passing through mikrotik. If your sending , receiving nodes are connected and accessible on Layer 2 MAC address, traffic will not pass through mikrotik. In this case data transferred directly.
Queues will be applied only if traffic passing through mikrotik.

neu

This is happening because, when proxy server trying to access the internet through your Mikrotik Router, this traffic also again redirected to same your proxy server. It is repeating again and again, that is why its looping. On Web proxy Redirection rule at Mikrotik router, set src-address=10.1.99.0...

neu

Congrats !

neu

It seems that you are trying to import bulk list of IP Address into Mikrotik IP Address list. This is not efficient method of writing firewall rules. Mikrotik is not a Database server. Your list size should be very thin. Because Mikrotik RouterOS should compare your each packet with this IP Address ...

neu

It should work. I am connecting many linux hosts via Mikrotik VPN. Assumed: You(Win7) ------> Miktotik(thro VPN) -----> Linux Host. right? Some how i can judge where the issue will be... please check assigned ip addr (for pptp tunnel in win7) may be blocked or no route to your Linux host. Or in othe...

neu

Why not? Mikrotik has solution.
You can restrict winbox can be accessible from range of IPs.

mt.png

neu

Please ensure, have you checked the "One session per Host" option.

neu

Is that happening only in Mobile Phone or in Laptop/Desktop computer also?

neu

This can be achieved by using external software package like neuCRM.
Create users, assign static ip to this user, and apply necessary firewall rule to client IPs.

neu

Here is a nice document for 2 WAN load balancing and Fail over.
https://aacable.wordpress.com/2011/07/2 ... t-by-zaib/
I have used, its working fine.

neu

Please ensure you are getting Public IP from your ISP.
You can only able to access your local Server from Internet, if your WAN has assigned with Public IP.

neu

Please note that DHCP request works on Network Layer(Layer2). So your DHCP Server and your DHCP Client node must be in Same network, ie. Layer2

neu

A Complete Solution for User management: Easy to use user friendly design. Web based: Attractive UI and Reports Accessible from Desktop PC, Tablet, Mobile. Inbuilt RADIUS for AAA functions Billing, Customer Care, Accounts Customer Selfcare Web portal with configurable permissions ISP, Reseller - Bus...

neu

The best choice is PCC method of load balancing cum fail over method.
Refer this link: https://aacable.wordpress.com/2011/06/0 ... t-by-zaib/
He has done a excellent documentation.

neu

Before an upgrade: 1) Remember to make backup/export files before an upgrade and save them on another storage device; 2) Make sure the device will not lose power during upgrade process; 3) Device has enough free storage space for all RouterOS packages to be downloaded. and take the backup in text f...

neu

rb750 series is a low memory router cannot store many files. so kindly u have to uncheck the accounting fron ppp secretes or from radius and accounting is also eating a lot of processor. well said. In this case you can go for external RADIUS server for Authentication, Accounting. If you need more f...

neu

If you need more flexible solution try http://neucrm.com, its a professional customer management software package.

neu

This might be previous logged users session was not terminated in User Manager. Adjust the interim update time as minimum interval, say 5 mins to 15 mins.

If you need more flexible solution try http://neucrm.com, its a professional customer management software package.

neu

Change the "X- disabled" status to Active by login via Winbox or Webfig or SSH.

neu

New version is really nice.

neu

Yes, you can relay DHCP request.
The only condition is that it your Client and DHCP server must be in same network. Please note that DHCP request only works in Layer 2 stack.

neu

Now the requirements are, User friendly, accessible from all devices(mobile, tablet), fully featured for current trend. So I suggest you go for neuCRM. http://www.neuCRM.com Web based: Attractive UI and Reports Accessible from Desktop PC, Tablet, Mobile. Inbuilt RADIUS for AAA functions Billing, Cus...

neu

Yes. It is possible to signup as self registration in MikroTik RouterOS Hotspot. And while self registration users can be verified with OTP sent via SMS & Email. The only thing is that, you must edit the MikroTik default Hotspot Login Page. It can be accessible via FTP. On MikroTik Hotspot Login Pag...

neu

Yet another comfortable solution is neuCRM software package. Its fully compatible with MikroTik RouterOS. The powerful features like Radius, API, CoA, PoD, etc which are available in MikroTik RouterOS is efficiently utilized in neuCRM. neuCRM uses freeradius as a RADIUS server, because freeradius is...

neu

There is a ready made software package called neuCRM (http://neucrm.com) for RADIUS AAA Function, CRM, Billing, User Management on Web front GUI, customer web-selfcare portal, SMS & Email Alerts, Online Payment Gateway Integrated, Reseller business model, Prepaid/Postpaid, Quick WiFi Hotspot Setup w...

Search found 36 matches

Re: Radius + Static ip + ikev2 posibble bug

Re: Radio "data rates"

Re: UserManager Statistics does not match actual usage of users

Re: Dual Wan (Load Balancing) over router board ( RB951G-2HnD )

Re: Customizing user-manager signup mail Subjet: with user login variable ...please help....

Re: Double NAT port forwarding

Re: Forwarding port 80/tcp stopped working

Re: i cannot delete files uploaded via FTP

Re: How to Configure Miktotik ROS conneted to a cisco 890 router to only act as a hotspot

Re: DHCP and PPPOE an same interface

Re: disconnected, received deauth

Re: simple queue for winbox connection itself

Re: web proxy issue

Re: DHCP WAN gateway - unavailable for additional static route?

Re: Convert Text File to Address List

Re: Linux hosts in VPN

Re: Urgent feature request: Bind IP services to a specific IP / Interface

Re: USER MANAGER

Re: RouterOS Hotspot samsung problem

Re: Limit time for users

Re: Equal Bandwidth PCQ per IP

Re: Port forwarding behind CGNAT

Re: DHCP client issue

Re: Setting up hotspot on several interfaces [SOLVED]

Re: 2 WAN failover stuck

Re: upgrading RouterOS

Re: RADIUS accounting request not sent: no response Please help

Re: Mikrotik router board as external user manager

Re: UserManager Session stuck

Re: Can not log in to user manager

Re: Winbox 3.13 released!

Re: dhcp relay from wifi to another lan device [SOLVED]

Re: Which Billing System Is The Best ???

Re: HotSpot/Userman - Signup (Self Registration) for a free account with no payment

Re: mikrotik custom hotspot template

Re: windows applications for user management