Community discussions

Search found 62 matches

by unlimitedme
Tue Jan 11, 2011 1:33 pm
Forum: General
Topic: [ASK] Router could not be ping from external network
Replies: 7
Views: 947

Re: [ASK] Router could not be ping from external network

Thanks SurferTim, it work like a charm!
i cant believe a simple default route is mandatory.
by unlimitedme
Mon Jan 10, 2011 2:56 pm
Forum: General
Topic: [ASK] Router could not be ping from external network
Replies: 7
Views: 947

Re: [ASK] Router could not be ping from external network

so you mean to say, if i add the ip default route
then any external network will be able to ping that public address?

i have contact my isp, they said they only able to ping that ip from the gateway's ip address.

i will add the default route, and let you know the result.
by unlimitedme
Mon Jan 10, 2011 2:27 pm
Forum: General
Topic: [ASK] Router could not be ping from external network
Replies: 7
Views: 947

Re: [ASK] Router could not be ping from external network

Hi SurferTim, as requested [admin@MikroTik] > /ip route pr Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 ADC 111.XX.YY.ZZZ/30 111.XX.YY.ZZZ ether1 0 [a...
by unlimitedme
Mon Jan 10, 2011 1:47 pm
Forum: General
Topic: [ASK] Router could not be ping from external network
Replies: 7
Views: 947

[ASK] Router could not be ping from external network

HI, I just bought a RB450G, remove the default configuration (bridges) and put the ip public address in eth1, then connect it to a switch where my ISP radio were plugged. however, i could not ping that ip public address from any external network. i do not setup any firewall rule. I use RouterOS 4.16...
by unlimitedme
Fri Aug 08, 2008 5:55 am
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

cybernet,
Thank you for your post, yes i am using unmanageable switch, so i want to overcome this situation.
I do not understand about your post,
If you have same situation, maybe you can post what you have accomplish.
For now, we are using EOIP.

Do you have other solution?

Thank you
by unlimitedme
Thu Aug 07, 2008 7:13 am
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

cybernet,
What you said is just an ordinary way to bridge two network over wireless, and that was not my question.
Thanks anyway for your post.
by unlimitedme
Thu Jul 31, 2008 6:58 am
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

jorj, I will try to use EOIP then, i will let you know the result. onnoossendrijver, Interesting, i will see if we can bridge EOIP with a VLAN. Diganet, Why use managable swith, if we can elaborate it with MikroTik? wpeople, we have minimal ethernet port resource on the AP and the client, so i am lo...
by unlimitedme
Wed Jul 23, 2008 9:33 am
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

wpeople,

how to create multiple wds for each client?
please take a look at my updated picture.
thanks a lot for your kind reply
by unlimitedme
Mon Jul 21, 2008 12:15 pm
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

Normis/Janis/Everyone, Please help... I have try to draw my scenario, please give me advice. I am using RouterOS 3.11 on both radio clients and Access Point radio http://img295.imageshack.us/img295/1249/vlanvg6.jpg Please advice, any reply will be highly appreciated Thank you note: i updated the pic...
by unlimitedme
Mon Jul 21, 2008 12:00 pm
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

meno, i think your case is similar with my case. can you tell me, how many progress that you made? i have try the following: on client radio: bridge port : vlan from ether , vlan from wlan on router A behind client radio: bridge port : vlan from ether1, ether 2 but the connection between client radi...
by unlimitedme
Sun Jul 20, 2008 2:32 pm
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

hytanium, Thank you so much for your reply... I am not quite sure about the wds bridging. What do i need to use as default bridging in the wlan for each network ? Because there is only 1 wlan on the each side of the radio. [Router A,B,C]**via LAN cable**[Client]~~~via wireless~~~[AP]**Via Lan cable*...
by unlimitedme
Wed Jul 16, 2008 8:08 am
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

please help anyone?
by unlimitedme
Sun Jul 13, 2008 4:18 pm
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Re: Multiple VLAN ID over wireless link, possible?

QpoX, Thank you for your reply, i have read those thread before. but those thread use multiple interface wlan. My situation is like this: [Router A]**via LAN cable**[Client]~~~via wireless~~~[AP]**Via Lan cable**[Router B] on Router A: 2 ether on Client (routerboard) : 1 ether, 1 wlan on AP (routerb...
by unlimitedme
Sat Jul 12, 2008 7:43 am
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 25890

Multiple VLAN ID over wireless link, possible?

Dear all, i have been trying to create a multiple VLAN connection over an existing wireless link, but every time i create a VLAN, and add the existing WLAN interface to VLAN, then the wireless connection will be broken, and disconnect. The reason i do this, because i have multiple router behind the ...
by unlimitedme
Fri Mar 21, 2008 3:10 pm
Forum: General
Topic: ROS 3.3 on x86,modify ip conn track causing always reboot?
Replies: 2
Views: 1081

Re: ROS 3.3 on x86,modify ip conn track causing always reboot?

sergejs/normis/janis,

please help...
by unlimitedme
Wed Mar 19, 2008 8:18 am
Forum: General
Topic: ROS 3.3 on x86,modify ip conn track causing always reboot?
Replies: 2
Views: 1081

Re: ROS 3.3 on x86,modify ip conn track causing always reboot?

knock knock, anyone?

please help...
by unlimitedme
Sun Mar 16, 2008 4:57 am
Forum: General
Topic: ROS 3.3 on x86,modify ip conn track causing always reboot?
Replies: 2
Views: 1081

ROS 3.3 on x86,modify ip conn track causing always reboot?

Dear All, I've changed the ip firewall conn track value into this: ip firewall connection tracking> pr enabled: yes tcp-syn-sent-timeout: 1s tcp-syn-received-timeout: 1s tcp-established-timeout: 1d tcp-fin-wait-timeout: 5s tcp-close-wait-timeout: 5s tcp-last-ack-timeout: 1s tcp-time-wait-timeout: 1s...
by unlimitedme
Wed Feb 27, 2008 4:07 pm
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Re: Mikrotik doesn't detect my ethernet card

still no response from mikrotik team......

normis/janis ? please help...
by unlimitedme
Sat Feb 23, 2008 5:19 am
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Re: Mikrotik doesn't detect my ethernet card

gmsmstr,

well, i'm sure many people out there having this issue as well and hopefully i'm not the only one that post about it.
i hope mikrotik support would listen about this issue.
by unlimitedme
Fri Feb 22, 2008 10:46 am
Forum: Wireless Networking
Topic: low bandwidth on wireless bridge
Replies: 4
Views: 1355

Re: low bandwidth on wireless bridge

same with me.

knock knock...any info from sergejs or normis?
by unlimitedme
Fri Feb 22, 2008 8:56 am
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Re: Mikrotik doesn't detect my ethernet card

gmsmstr,

yes, i hope so. Because this motherboard was already out on 2007.
Thanks
by unlimitedme
Thu Feb 21, 2008 4:27 am
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Re: Mikrotik doesn't detect my ethernet card

thanks gmsmstr.

normis, i have send the supout.rif, hopefully it will be added on next release.
thank you.
by unlimitedme
Wed Feb 20, 2008 4:48 pm
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Re: Mikrotik doesn't detect my ethernet card

normis,

where should i send the supout.rif?
by unlimitedme
Wed Feb 20, 2008 6:47 am
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Re: Mikrotik doesn't detect my ethernet card

i attach some screen shot from resource window

Image

the Mikrotik recognize it, but it doesn't show on interface list
by unlimitedme
Wed Feb 20, 2008 5:15 am
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Re: Mikrotik doesn't detect my ethernet card

Dear maximan,

the chipset is 10/100Mb Attansic PCIe LAN.
Do Mikrotik not support this chipset?

thanks
by unlimitedme
Tue Feb 19, 2008 3:57 pm
Forum: General
Topic: Mikrotik doesn't detect my ethernet card
Replies: 13
Views: 4471

Mikrotik doesn't detect my ethernet card

to normis and everybody,

i'm using pc as my router machine, the motherboard is ASUS P5GC-MX, the new Mikrotik 3.3 still can not detect driver for my on board ethernet LAN card.Please help...

thank you
by unlimitedme
Wed Dec 19, 2007 9:06 am
Forum: The Dude
Topic: Translating THE DUDE
Replies: 147
Views: 44069

Re: Translating THE DUDE

chupaka,

i'm on it..
by unlimitedme
Tue Dec 18, 2007 6:10 pm
Forum: The Dude
Topic: Translating THE DUDE
Replies: 147
Views: 44069

Re: Translating THE DUDE

normis,

how about indonesian? (bahasa) ?
may i do it?
by unlimitedme
Tue Nov 27, 2007 4:49 am
Forum: General
Topic: How I Can Set ICMP Ping at Same Latency
Replies: 4
Views: 1269

Re: How I Can Set ICMP Ping at Same Latency

sergejs,

can this scenario being applied in a bridge wireless networks?

thanks
by unlimitedme
Sat Nov 24, 2007 8:32 am
Forum: RouterBOARD hardware
Topic: 532A
Replies: 6
Views: 1661

Re: 532A

normis right, the new 532 series was already at 400Mhz.
for the old ones, you can try overclock it.
by unlimitedme
Wed Oct 10, 2007 12:12 pm
Forum: General
Topic: biggest harddrive for webproxy
Replies: 30
Views: 2519

Re: biggest harddrive for webproxy

For enterprise system, the money was not the issue,
Service Level Agreement and QoS that matters the most.
But, for small-medium company system, usually they think more about cost reduction.

Either way, it proves to us that our Mikrotik can run for every type of company.
So, why bother arguing it? :)
by unlimitedme
Wed Oct 10, 2007 11:58 am
Forum: The User Manager
Topic: Time based - remaining time wrong
Replies: 2
Views: 1256

Re: Time based - remaining time wrong

uptime limit=1h and credit with time equal to 1w
by unlimitedme
Tue Oct 09, 2007 7:45 am
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 60826

Re: Which Billing System Is The Best ???

well, i havent find a way to differentiate the user queue for local or oversea in usermanager.
It's just one queue for the user.

:?
by unlimitedme
Mon Oct 01, 2007 12:07 pm
Forum: Wireless Networking
Topic: Routed Networks, not bridging interface
Replies: 9
Views: 1511

Re: Routed Networks, not bridging interface

knock,,knock... anyone?
by unlimitedme
Wed Sep 26, 2007 7:56 am
Forum: General
Topic: How to manage multiple Access Points when using WDS
Replies: 19
Views: 2765

Re: How to manage multiple Access Points when using WDS

i am very confuse with your setup,
NATing with bridge??? :shock:
by unlimitedme
Wed Sep 26, 2007 7:50 am
Forum: Wireless Networking
Topic: Transparent bridge
Replies: 2
Views: 755

Re: Transparent bridge

JJCinAZ, i have setup a routed network, it's like this: Network A (10.1.5.0/24) | | Router A (mode=station) | | Router B (mode=ap-bridge) | | Network B(10.1.2.0/24) the direction is from network A to network B, the link was ok, it shows connected. - how to forward all network A, so network B can see...
by unlimitedme
Tue Sep 25, 2007 10:47 am
Forum: Scripting
Topic: Putting router to sleep for a some time...
Replies: 4
Views: 992

Re: Putting router to sleep for a some time...

IMHO,
it is better if you use some power surge protector, rather than make it "sleep".
by unlimitedme
Fri Sep 21, 2007 1:11 pm
Forum: Wireless Networking
Topic: Routed Networks, not bridging interface
Replies: 9
Views: 1511

Re: Routed Networks, not bridging interface

@warwick09, thanks for replying. actually i was only wanted to create a routed network, since bridging allows my client to see each other network, and they tend to mess with other's file/folder. example: ISP (ether1=10.1.1.254) | BOX1(wlan1 = 192.168.10.1, ether1=10.1.1.1, mode = AP)---client1 | | c...
by unlimitedme
Thu Sep 20, 2007 11:20 am
Forum: Wireless Networking
Topic: Help - NStreme2 terrible throughput
Replies: 71
Views: 6129

Re: Help - NStreme2 terrible throughput

dingram,

have you try changing channel?
It might be the interference from other wireless antenna around you.
by unlimitedme
Thu Sep 20, 2007 11:13 am
Forum: Wireless Networking
Topic: Routed Networks, not bridging interface
Replies: 9
Views: 1511

Re: Routed Networks, not bridging interface

hello everybody? please help... :(
by unlimitedme
Tue Sep 18, 2007 6:22 am
Forum: Wireless Networking
Topic: Routed Networks, not bridging interface
Replies: 9
Views: 1511

Re: Routed Networks, not bridging interface

Dear Gunzoid,

so it means, only AP - station mode right?
and how about protect each client, so they can not see each other?
by unlimitedme
Mon Sep 17, 2007 7:04 am
Forum: Beginner Basics
Topic: How to link 2 networks
Replies: 4
Views: 1559

Re: How to link 2 networks

avisdel,
if you wanted to link 2 different networks,
try to use bridge interface.
by unlimitedme
Mon Sep 17, 2007 6:53 am
Forum: General
Topic: ping latency high
Replies: 6
Views: 1067

Re: ping latency high

CMIIW,
as i know, you can assign a specific queue for ICMP or ping packet, so it wont get stuck at the same queue.

try it if you like.
by unlimitedme
Mon Sep 17, 2007 6:33 am
Forum: Wireless Networking
Topic: Routed Networks, not bridging interface
Replies: 9
Views: 1511

Re: Routed Networks, not bridging interface

Dear Znuff, thank you for your reply! yes it is, that is what i am trying to create. -how about the wlan mode? on Box 2 (client), i set the wlan as station-wds mode and on box 1(ap), i set the wlan as ap mode. and i am not doing any bridge port, or create any bridge at all. - i am also wanted to pre...
by unlimitedme
Sat Sep 15, 2007 5:50 am
Forum: Wireless Networking
Topic: Routed Networks, not bridging interface
Replies: 9
Views: 1511

Routed Networks, not bridging interface

Hi all, I have manage to bridge different network and same network, but recently i have been reading about routing network. The objective now is the mikrotik box can act as router not switch anymore (today it was using bridge interface between each box). Is this possible? or i am just day dreaming? ...
by unlimitedme
Tue Sep 11, 2007 5:21 pm
Forum: General
Topic: Packets being routed out instead of local [RESOLVED]
Replies: 12
Views: 1217

Re: Packets being routed out instead of local [RESOLVED]

stuntshell,

what do you mean by looking the table of each network segment?
please explain in config.

thanks
by unlimitedme
Wed Sep 05, 2007 9:24 am
Forum: Beginner Basics
Topic: plzzzzz so ergent
Replies: 9
Views: 1805

Re: plzzzzz so ergent

- you were running ppoe-client on public interface?
- can you print out the route?
/ip route print
by unlimitedme
Wed Sep 05, 2007 9:23 am
Forum: General
Topic: ICMP connections, bypass QoS?
Replies: 9
Views: 2345

Re: ICMP connections, bypass QoS?

downloading via ICMP?
please explain it.
by unlimitedme
Mon Aug 27, 2007 9:47 am
Forum: Wireless Networking
Topic: WDS, Transparent bridge.
Replies: 9
Views: 2607

Re: WDS, Transparent bridge.

Dear balimore,

do you have example VLAN on wireless network?
Thank you so much
by unlimitedme
Mon Aug 27, 2007 8:05 am
Forum: Wireless Networking
Topic: WDS, Transparent bridge.
Replies: 9
Views: 2607

Re: WDS, Transparent bridge.

sorry balimore,
i am not clear enough, it was station-wds mode on each client router.
the problem is, network client B and C can see each other,
they were supposed to only see their network only, not other network.

any idea? as i am still a noob on mikrotik. :(

Thank you
by unlimitedme
Mon Aug 27, 2007 6:28 am
Forum: Wireless Networking
Topic: WDS, Transparent bridge.
Replies: 9
Views: 2607

Re: WDS, Transparent bridge.

dear all, to make all of you clear of my network, MAIN GATEWAY (NETWORK primary - AP Bridge) || || WDS || || ROUTER A (AP Bridge)----WDS------ROUTER B (Station) || || WDS || || ROUTER C (Station) - Is it have to do with masquerade each network B and C? - so the client behind the router can not see e...
by unlimitedme
Mon Aug 27, 2007 6:08 am
Forum: Wireless Networking
Topic: WDS, Transparent bridge.
Replies: 9
Views: 2607

Re: WDS, Transparent bridge.

mneumark,

thank you for your reply.
How to use VLAN on a wireless network like i have?Can you give me a hint?
I have read the manual about VLAN, but it does not show any example for wireless.
Please help.
by unlimitedme
Sun Aug 26, 2007 3:16 pm
Forum: Wireless Networking
Topic: WDS, Transparent bridge.
Replies: 9
Views: 2607

WDS, Transparent bridge.

Guys, I have these kind of networks, Network A has 2 physical interface, as Access Point -ether1 (10.1.1.250/24) -wlan1 (mode = ap-bridge) -wdsbridge1 (192.168.10.253/24) Network B has 2 physical interface, as Client1 -ether1 (10.1.2.250/24) -wlan1 (mode = station) -wdsbridge1 (192.168.10.252/24) Ne...
by unlimitedme
Mon Aug 13, 2007 6:44 am
Forum: Wireless Networking
Topic: Backhaul and non-satisfactory results
Replies: 19
Views: 3109

Re: Backhaul and non-satisfactory results

mneumark,

may i have your setup configuration please?
i'm doing WDS now, and i wanted to try your setup.
thank you
by unlimitedme
Tue Aug 07, 2007 6:51 am
Forum: Wireless Networking
Topic: Bridge two networks, NOT Wds, only Layer 3
Replies: 15
Views: 2039

Re: Bridge two networks, NOT Wds, only Layer 3

how much tx/rx the rate?
any significant increase compare with wds?
by unlimitedme
Tue Aug 07, 2007 6:43 am
Forum: Wireless Networking
Topic: WDS, how to NAT each network?
Replies: 2
Views: 790

Re: WDS, how to NAT each network?

thanks, i have got it work and running.
by unlimitedme
Mon Aug 06, 2007 1:10 pm
Forum: Wireless Networking
Topic: Client profiles, how do you do it?
Replies: 3
Views: 627

Re: Client profiles, how do you do it?

Does those client connect to the same base station?

Never try it though,
how about create queue for each client mac address ?
by unlimitedme
Mon Aug 06, 2007 1:07 pm
Forum: Wireless Networking
Topic: 1.5km link 108mbps
Replies: 8
Views: 1508

Re: 1.5km link 108mbps

In theory,
if you bond those 2 physical interface, you will get about +40MB,
but in reality, it will drop to 50%,
try to use Nstreme2, maybe you will get better performance
by unlimitedme
Mon Aug 06, 2007 12:53 pm
Forum: Wireless Networking
Topic: Bridge two networks, NOT Wds, only Layer 3
Replies: 15
Views: 2039

Re: Bridge two networks, NOT Wds, only Layer 3

i'm kinda confuse with your setup, maybe you could explain it better, 1. set wireless side A with ap-bridge mode, and side B with station mode, correct? 2. do not create bridge port, correct? 3. side A: Ether1 = ISP ip address (public) WAN1 = 192.168.70.1/24 (private) a router with IP: 192.168.190.0...
by unlimitedme
Mon Aug 06, 2007 8:38 am
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 33204

Re: CPE-Antenna alignment via customer / Application available?

Chris, would you mind email me those app too? (unlimited_question2004 at yahoo dot com)
thx a lot
by unlimitedme
Sun Aug 05, 2007 9:53 am
Forum: Wireless Networking
Topic: WDS, how to NAT each network?
Replies: 2
Views: 790

WDS, how to NAT each network?

Hello all, i'm a new members in this forum, i have been reading the manual and succesfully create WDS between 2 network. Network A: ether1: 10.1.1.252 wireless-bridge: 192.168.10.252 Network B: ether1: 10.1.1.253 wireless-bridge: 192.168.10.253 My question are: - How to NAT the network behind each r...