Same probleme in 7.4 .....

Upgrading CCR1009-7G-1C-1S+(tile) from 6.49.6 (Stable) to 7.4 (Stable), stopped working micro sd card.
It's a shame and problematic when there is a Dude to install on it

well seen!

Perfect
It's Work !

Thx mducharme !!

very good i will try tonight.
This is strange because I am doing the exact same configuration on a WireGuard server installed on an Ubuntu.
It allowed me to communicate the clients together.

Hello,

Yes, I am also having the same problems,
I can't find any solution,

1 Client works well
but when a second Peers is created, the first Peers no longer works.
Why ?

Hi All,
Do you have any idea?

Thx

Hi All, I would like to use the string functions to make filters in my label. I would like to do that, but I am almost sure that it is not possible, because I am in a ros_command [Interface.Name]: [ros_command(":put ([interface ethernet monitor [Interface.Name] once as-value]->\"sfp-vendor...

Perfect,
Thx for your help

Hi All,

It works very well,
Perfect

Hi All,
Perhaps,
to be more clear I only want to display a value in the monitor function.

Thx for your Feedback

Hello, I don't understand why The Dude does not display the result of this command with as-value With Winbox [admin@SW1] > :put ([interface ethernet monitor sfpplus1 once as-value]->"sfp-vendor-part-number") S+85DLC03D With label The Dude [ros_command(":put ([interface ethernet monito...

Hi Zacharias,

Ok, thx, my fault, yes it works correctly.
Do you know what the DP means?

Otherwise,
if someone knows the Rate sets well,

I would like to understand each indication

1S or 2S ==> ??
OFDM:6-54 ==> OK, supported rate
BW:1x-4x ==> ??
SGI:1x-4x ==> ??
HT:0-15 ==> ??
VHTMCS:SS1=0-9,SS2=0-9 ==> ??

Yes indeed,
it was a test phase,
today it's good without WPA, very good note!

Hello, I just took the test, 1.PNG With Export /caps-man channel add band=2ghz-onlyn control-channel-width=20mhz frequency=2437 name="2Ghz-n 2437-2462/20" secondary-frequency=2462 add band=2ghz-onlyn control-channel-width=20mhz frequency=2462 name="2Ghz-n 2462/20" add band=5ghz-o...

Thanks for your feedback,

But except, error on my part, impossible to list the frequencies by a comma ","

Hi, I would like to use this list. /caps-man channel add band=2ghz-g/n control-channel-width=20mhz frequency=2437 name="2Ghz-g/n 2437/20" add band=2ghz-g/n control-channel-width=20mhz frequency=2462 name="2Ghz-g/n 2462/20" add band=5ghz-onlyac control-channel-width=20mhz frequenc...

Thanks for your feedback, Here is my error, I did not select the "Local Forwarding" and "Client to Client Forwarding" Capture.PNG Now I have this new problem. I currently have 2 CAPs, I think in the end, to have 4 in all the house, especially to cover properly in 5Ghz. But I woul...

Hello, I carefully followed several tutorials on how CAPsMAN works. I think I have made a good configuration. But, as soon as I connect to the wifi, nothing works and the Winbox disconnects from the CAP with ethernet, why ?? Here is the configuration of the CAPsMAN # apr/12/2020 18:12:46 by RouterOS...

ok, thanks for your feedback.
I will take CRS. if the network has to evolve.

Thx for your feedback,
it is in a building,
length of the fiber is about 150,200m.
it's purely technical. on my diagram I drew some PCs. but it is equipment with a fixed ip.
No internet.
Ring with 1GB SFP+

a diagram

The network is in L2. 5 (RouterOS or SwitchOS) connected together with a multimode LC fiber loop. on each device some devices connected. I just wrote on the forum "Ring topology" and I'm lost now. https://forum.mikrotik.com/search.php?keywords=Ring+topology https://forum.mikrotik.com/viewt...

Thanks for your return,

Yes it is a simple network in L2.

is there a better solution than RSTP, and easy to implement?
I read some post, I'm lost between, OSPF, MPLS, VPLS.

if you have experience using these protocols.

if the redundancy is better in the event of a break, I can take RouterOS

thx

Hello, I am new to the forum, and I would like to call the network specialist. I have a network ring fiber LC (Multimode) to achieve, with 5 (SwitchOS or RouterOS). (closed network not on internet) On each device, just some RJ45 device. I have the choice between two models: CSS326-24G-2S + RM (Switc...