Community discussions

MikroTik App

Search found 12 matches

by iHyenDeer
Fri Jun 04, 2021 12:01 pm
Forum: Beginner Basics
Topic: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]
Replies: 12
Views: 812

Re: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]

I might not understand what we're trying to achieve. that routing mark rule is to make the pptp tunnel to use a specific route, Not you lan traffic, just the tunnel itself , since there is no relevant routing mark for your local traffic, it will still go trought your main route. Thats still a good a...
by iHyenDeer
Thu Jun 03, 2021 5:27 am
Forum: Beginner Basics
Topic: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]
Replies: 12
Views: 812

Re: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]

Modify the following. add distance= 1 gateway=192.168.51.1 routing-mark=markpptpclient I have implemented your suggestions but unfortunately it still doesn't work. All traffic including vpn connection goes through lte1. This is my code at the moment /ip firewall address-list add address=my.server.dd...
by iHyenDeer
Wed Jun 02, 2021 7:32 pm
Forum: Beginner Basics
Topic: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]
Replies: 12
Views: 812

Re: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]

There is no need to specify the port and protocol, thus with the dst-adress-list should be more than enought to route trought a specific wan, ps, unmark "passtrought" This is my config (relevant part) at the moment that unfortunately doesn't work: /ip firewall address-list add address=my.s...
by iHyenDeer
Wed Jun 02, 2021 8:10 am
Forum: SwOS
Topic: Transportiong Physical interfaces to VLANS using the switch chip [SOLVED]
Replies: 2
Views: 803

Re: Transportiong Physical interfaces to VLANS using the switch chip [SOLVED]

Solved, VLAN TAGGIN.

Managed to do it using only the hardware switch.
by iHyenDeer
Wed Jun 02, 2021 8:04 am
Forum: Beginner Basics
Topic: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]
Replies: 12
Views: 812

Re: Routing pptp through a specific (dedicated) gateway in dual gateway system [SOLVED]

needs: a) Route a a PPTP Client to Central PPTP Server over specified WAN. b) The Central PPTP Server has a public IP Address that regulary changues. c) Divide traffic between 2 wan. (I'd like to discuss this one later if you want cause its more advanced) b) You need a way to constantly feetch your ...
by iHyenDeer
Wed Jun 02, 2021 6:54 am
Forum: Beginner Basics
Topic: 2 ISP >> 2LAN [SOLVED]
Replies: 42
Views: 1746

Re: 2 ISP >> 2LAN [SOLVED]

Like this. on your ip>route>rules show2.PNG show 1.PNG Should allow your two CIDR ranges to talk to each other. Right, that's what I want 192.168.20.0/24 to comunicate to 192.168.30.0/24 and vice versa right? Where is it added? Im not an expert on routing, But I faced the same issue before, Besides ...
by iHyenDeer
Wed Jun 02, 2021 5:37 am
Forum: Beginner Basics
Topic: 2 ISP >> 2LAN [SOLVED]
Replies: 42
Views: 1746

Re: 2 ISP >> 2LAN [SOLVED]

Im not an expert on routing, But I faced the same issue before, Besides the language barrier, all you need: 192.168.20.0/24 to comunicate to 192.168.30.0/24 and vice versa right? Just add the src-address and dst-address on your rules for the main table. one to allow 192.168.20.0/24 to talk to 192.16...
by iHyenDeer
Sat Feb 13, 2021 1:01 pm
Forum: SwOS
Topic: Transportiong Physical interfaces to VLANS using the switch chip [SOLVED]
Replies: 2
Views: 803

Re: Transportiong Physical interfaces to VLANS using the switch chip [SOLVED]

update.


I was trying to reach 2 subnets in the same broadcast area, probably it has something to do with the mac addresses.
by iHyenDeer
Sat Feb 13, 2021 12:41 pm
Forum: SwOS
Topic: Transportiong Physical interfaces to VLANS using the switch chip [SOLVED]
Replies: 2
Views: 803

Transportiong Physical interfaces to VLANS using the switch chip [SOLVED]

Hi, i'm having a very hard time triying to solve this. I receive from my provider 8 Ethernet links and all i wan to do is pick them up trought a single interfase. I bough a switch a CRS326-24G-2S+ I'm trying to set up the trunking with hardware offload but at the moment I add another physical untagg...
by iHyenDeer
Sat Jun 27, 2020 4:41 am
Forum: Beginner Basics
Topic: IPv6 Static routes I need some advice.
Replies: 0
Views: 513

IPv6 Static routes I need some advice.

Basics: R1- eth01- IPv6 --- 2001:db8::1/64 ------------------ eth1 2001:db8::2/64 R2 PtP Scenario between routers above, Now for my lan is something like this: ((Router 1 )) eth02 ((Advertise )) 2001:db3::1/64 -------------- My pc. / ((Router 2 )) eth02 ((Advertise)) 2001:db9::1/64. I get my V6 Adre...
by iHyenDeer
Tue Mar 24, 2020 11:01 pm
Forum: General
Topic: MAC alias for WAN Eth1
Replies: 15
Views: 4599

Re: MAC alias for WAN Eth1

by iHyenDeer
Fri May 03, 2019 1:07 am
Forum: Forwarding Protocols
Topic: How to assign routed public ip
Replies: 2
Views: 2289

Re: How to assign routed public ip

Just add a Dst-nat to all ports to a specific IP . It's a NAT RULE, You won't be publishing the IP yourself, however everything coming from public x.x.x.x including ports will be fordwarded trought NAT to your local x.x.x.x. Just asign your Customer to a static IP so you won't mess up giving the NAT...