I might not understand what we're trying to achieve. that routing mark rule is to make the pptp tunnel to use a specific route, Not you lan traffic, just the tunnel itself , since there is no relevant routing mark for your local traffic, it will still go trought your main route. Thats still a good a...

Modify the following. add distance= 1 gateway=192.168.51.1 routing-mark=markpptpclient I have implemented your suggestions but unfortunately it still doesn't work. All traffic including vpn connection goes through lte1. This is my code at the moment /ip firewall address-list add address=my.server.dd...

There is no need to specify the port and protocol, thus with the dst-adress-list should be more than enought to route trought a specific wan, ps, unmark "passtrought" This is my config (relevant part) at the moment that unfortunately doesn't work: /ip firewall address-list add address=my.s...

Solved, VLAN TAGGIN.

Managed to do it using only the hardware switch.

needs: a) Route a a PPTP Client to Central PPTP Server over specified WAN. b) The Central PPTP Server has a public IP Address that regulary changues. c) Divide traffic between 2 wan. (I'd like to discuss this one later if you want cause its more advanced) b) You need a way to constantly feetch your ...

Like this. on your ip>route>rules show2.PNG show 1.PNG Should allow your two CIDR ranges to talk to each other. Right, that's what I want 192.168.20.0/24 to comunicate to 192.168.30.0/24 and vice versa right? Where is it added? Im not an expert on routing, But I faced the same issue before, Besides ...

Im not an expert on routing, But I faced the same issue before, Besides the language barrier, all you need: 192.168.20.0/24 to comunicate to 192.168.30.0/24 and vice versa right? Just add the src-address and dst-address on your rules for the main table. one to allow 192.168.20.0/24 to talk to 192.16...

update.


I was trying to reach 2 subnets in the same broadcast area, probably it has something to do with the mac addresses.

Hi, i'm having a very hard time triying to solve this. I receive from my provider 8 Ethernet links and all i wan to do is pick them up trought a single interfase. I bough a switch a CRS326-24G-2S+ I'm trying to set up the trunking with hardware offload but at the moment I add another physical untagg...

Basics: R1- eth01- IPv6 --- 2001:db8::1/64 ------------------ eth1 2001:db8::2/64 R2 PtP Scenario between routers above, Now for my lan is something like this: ((Router 1 )) eth02 ((Advertise )) 2001:db3::1/64 -------------- My pc. / ((Router 2 )) eth02 ((Advertise)) 2001:db9::1/64. I get my V6 Adre...

viewtopic.php?f=2&t=93517&hilit=It%27s+ ... on#p466594

This dude might have the solution

Just add a Dst-nat to all ports to a specific IP . It's a NAT RULE, You won't be publishing the IP yourself, however everything coming from public x.x.x.x including ports will be fordwarded trought NAT to your local x.x.x.x. Just asign your Customer to a static IP so you won't mess up giving the NAT...