Did I understand this correctly, this is a home setup? If so, wow, how to NOT setup for Netflix :D What do you mean? and yes it's kind of both home and work :-) What I am saying, tyo me personally, it is a bit of a complicated setup for Home Office environment, you have Routers doing routing, swith...
Is ether6 trunk (all tagged) or hybrid (some untagged together with tagged) port? If it's trunk then it woukd perhaps work better if that port wasn't member of bridge. If it's hybrid, I'd make it trunk by creating another VLAN, used for passing otherwise untagged traffic over trunk connections. N.b...
Just a quick thought, since you are using a Cisco AP, it doesn't have any client-isolation or vlan filtering on it that is blocking vlan subnets from communicating does it? I don't thing so since I didn't set up anything like that just a simple setup as far for Cisco AP Can't it be firewall on lapt...
I believe you need to enable vlan filtering on the bridge. By default, Mikrotik allows communications between any routed interfaces. You would have to use firewall rules to drop any traffic between LAN segments you did not want. https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Fil...
So here is the current config . There is few other Wi-Fi vlans for 5GHz radio but If I know what I'm missing for vlan10 I'm, sure I can fix the on the other one.... # apr/26/2018 23:39:47 by RouterOS 6.41.3 # software id = 5GSV-WY2I # # model = RouterBOARD 3011UiAS # serial number = /interface bridg...
configuration for IP Interface and IP Address is not complete. The native LAN must have an address and interface as well. and showing your NAT rules would help. My best guess, is the problem is likely to be a source NAT issue, try this add chain=srcnat action=masquerade out-interface=ether2 Edit: t...
I'm assuming the VLAN networks are specifically used for WIFI and the rest of the network is normal LAN traffic. In general, I thought that at the router level without a specific drop rule VLAN members would be able to connect to other VLAN members through layer 3 routing? In other words, even if y...
Hello, I got this issue that I'm trying to figured out. I have main network that sits on 10.0.0.0/24 also I have 2 additional networks WiFi Home 10.0.10.0/24 and WiFi Guest 10.0.20.0/24 everybody can get on internet but I would also like to network 10.0.10.0/24 to be able to access network 10.0.0.0/...