Community discussions

Search found 51 matches

by rgpmikrotik
Sat Apr 30, 2016 12:21 am
Forum: Forwarding Protocols
Topic: Dual WAN routing policy + mangle rules [not working]
Replies: 10
Views: 34008

Re: Dual WAN routing policy + mangle rules [not working]

I have the same problem for the incoming traffic, have you solve this?
by rgpmikrotik
Wed Jul 30, 2014 12:44 am
Forum: Beginner Basics
Topic: 3 places with vpn, routing problem
Replies: 1
Views: 502

3 places with vpn, routing problem

Hello, I have 3 mikrotiks, just one of them has fixed ip, so i create 2 servers pptp in this router, then i conect the others routers to this vpn servers. The lans ip are: 192.168.10.0/24 for the firs router 192.168.20.0/24 for the second one 192.168.30.0/24 for the last one. The problem I have is t...
by rgpmikrotik
Thu Sep 13, 2012 11:09 pm
Forum: General
Topic: understanding traffic
Replies: 2
Views: 429

understanding traffic

Hello I have an WISP with this architecture: | ----- |------ ----RB1000------cisco2960--- |------ |------ where the RB 1000 is a pppoe server connected to the cisco switch and then every nodes are conected to the same switch, APs and SMs are mikrotik. THE PROBLEM I HAVE IS THAT: if i connect directl...
by rgpmikrotik
Fri Jul 27, 2012 10:07 pm
Forum: General
Topic: ISP Firewall
Replies: 5
Views: 1268

Re: ISP Firewall

I´m looking for the same info
by rgpmikrotik
Thu Jul 19, 2012 10:55 pm
Forum: General
Topic: linux in mikrotik
Replies: 3
Views: 689

linux in mikrotik

Hello,

Is possible to install linux in a routerboard? I have used openwrt with metarouter but I'm asking if I can install linux as if the routerboard would be a pc.

thanks in advance
by rgpmikrotik
Thu Jun 21, 2012 10:29 pm
Forum: General
Topic: Generating a .pcap from Mikrotik - ERROR
Replies: 1
Views: 1196

Generating a .pcap from Mikrotik - ERROR

Hello, I´m using a RB 1100 AH X2, I´m trying to generate a .pcap from the RB using these commands: /tool sniffer set file-name=example /tool sniffer set memory-limit=10000 file-limit=100000 /tool sniffer start /tool sniffer packet print /tool sniffer stop The problem is that when I open with wiresha...
by rgpmikrotik
Thu May 24, 2012 1:04 am
Forum: General
Topic: multiple pppoe clients over the same interface
Replies: 1
Views: 469

multiple pppoe clients over the same interface

Hello,

is possible to use multiple pppoe clients over the same interface??

thanks in advance.
by rgpmikrotik
Wed May 23, 2012 11:19 pm
Forum: General
Topic: dnat count packets error
Replies: 1
Views: 371

dnat count packets error

Hello, I have created a dnat rule in a RB750, it works fine, but from winbox the packet counter for the rule just count 1 packet, no all the packets, if I delete the active connection then It count 1 packet again, but the counter stop after the first packet of the connection. Can I do something for ...
by rgpmikrotik
Tue Jan 03, 2012 2:16 pm
Forum: General
Topic: bridge untagged and tagged from same port NEED FIX YEAR AGO!
Replies: 13
Views: 9337

Re: bridge untagged and tagged from same port NEED FIX YEAR

Code: interface FastEthernet0/1 description VLAN Trunk with native (untagged) VLAN switchport trunk native vlan 100 switchport trunk allowed vlan 100,101 switchport mode trunk ! interface FastEthernet0/2 description Access port (no tagging) on VLAN 100 switchport access vlan 100 ! interface FastEth...
by rgpmikrotik
Mon Dec 26, 2011 9:51 pm
Forum: General
Topic: vlans question
Replies: 0
Views: 275

vlans question

Hello, I will use this scheme for ilustrate what I want to do: (0)______ ...............\____RB 750___(1)(2) (2)_____ / Where : (X): X specifies de vlan tag .: the dot character is only related with the order of the scheme it has no relevance I have incoming both kind of traffic from my network, vla...
by rgpmikrotik
Fri Jun 11, 2010 10:52 pm
Forum: General
Topic: RB750 vs RB750G
Replies: 10
Views: 3727

RB750 vs RB750G

Hello,

I want to know the differences between the RB 750 and RB750G, the only one is the gigabit support?

thanks in advance
by rgpmikrotik
Wed Jun 02, 2010 8:33 pm
Forum: Virtualization
Topic: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH
Replies: 10
Views: 11829

Re: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH

I`think this are the sources:

http://downloads.openwrt.org/sources/

and these the tools?

http://downloads.openwrt.org/docs/build ... ation.html

Is that the only way??

thanks in advance
by rgpmikrotik
Wed Jun 02, 2010 3:21 pm
Forum: Virtualization
Topic: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH
Replies: 10
Views: 11829

Re: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH

A ok, so, how to do this? can you explainme how to do that?, I don´t know how to generate an .ipk package for metarouter since my pc.

thanks in advance
by rgpmikrotik
Wed Jun 02, 2010 3:17 am
Forum: Virtualization
Topic: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH
Replies: 10
Views: 11829

Re: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH

I could't find asterisk.ipk for metarouter for the rb433ah, so i tried to compile by myself, but when i try make asterisk I have an error, it seems that make is not installed, what can I do?: /bin/ash: make: not found here I show you mi installed packages: root@OpenWrt:/usr/src/# opkg list-installed...
by rgpmikrotik
Mon May 31, 2010 7:37 pm
Forum: Virtualization
Topic: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH
Replies: 10
Views: 11829

Re: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH

a, ok, I want to install asterisk, I sould compile by myself? I mean make, make install etc?

thanks in advance
by rgpmikrotik
Sat May 29, 2010 9:58 pm
Forum: Virtualization
Topic: METAROUTER + OPENWRT = OPKG ERROR IN RB433AH
Replies: 10
Views: 11829

METAROUTER + OPENWRT = OPKG ERROR IN RB433AH

Hello, I have installed openwrt with metarouter in a RB433AH, i used the precompiled version openwrt-mr-mips-rootfs.tgz.tar downloaded in mikrotik . I have internet access in openwrt. The problem is that: in /etc/opkg.conf I have: src/gz snapshots http://downloads.openwrt.org/snapshots/trunk/mr-mips...
by rgpmikrotik
Thu May 20, 2010 3:52 pm
Forum: Virtualization
Topic: METAROUTER IN RB750 + OpenWRT + Asterisk
Replies: 3
Views: 5309

METAROUTER IN RB750 + OpenWRT + Asterisk

Hello, I wan´t to install openWRT in a RB750, it has 32mb of RAM and 64 mb of flash, is that possible?, I think 16mb for Mikrotik RouterOS and 16 MB for openWRT. I would use the precompiled package of openWRT provided by Mikrotik for using with Metarouter, so, as I understood I don´t need patches. I...
by rgpmikrotik
Tue Jul 03, 2007 6:02 pm
Forum: Wireless Networking
Topic: BRIDGE AP
Replies: 2
Views: 653

BRIDGE AP

Hello I want to configure 2 mt as bridge, but i can´t find info about the configuration, please tell me where to begin, thanks
by rgpmikrotik
Mon Jul 02, 2007 5:16 pm
Forum: General
Topic: PPPOE SERVER + bandwith control
Replies: 1
Views: 765

PPPOE SERVER + bandwith control

Hello, I have my mt working as PPPoE Server, so it uses the global-in global out and global total for my clients bandwith. I want to limit the total bandith so I should use the physic interfaces (eth2 and eth3), but eth3 doesn´t work in my queue tree because the pppoe virtual interfaces are created,...
by rgpmikrotik
Wed Jun 27, 2007 4:52 pm
Forum: Wireless Networking
Topic: HotSpot
Replies: 1
Views: 549

HotSpot

Hello, I´m configurating my MT as hotspot and it´s working well. But I can´t do that my clients see a popup showing the connection status (time, Bytes, IP, etc), how I have to do?
Thanks
by rgpmikrotik
Wed Jun 27, 2007 3:56 pm
Forum: General
Topic: HotSpot
Replies: 2
Views: 594

HotSpot

Hello, I´m configurating my MT as hotspot and it´s working well. But I can´t do that my clients see a popup showing the connection status (time, Bytes, IP, etc), how I have to do?
Thanks
by rgpmikrotik
Fri Jun 01, 2007 3:43 pm
Forum: General
Topic: Bridge
Replies: 1
Views: 488

Bridge

Hello, my Mt has 2 ethernes interfaces configurated as a bridge interface. All it´s working well. But I have a question, the gateway of my client can be either my MT (as bridge) or the next gateway (wich provides internet to my MT), how do I configurate it? (the traffic always passes trougth my MT)T...
by rgpmikrotik
Fri Jun 01, 2007 3:03 pm
Forum: General
Topic: Mangle and queues
Replies: 0
Views: 458

Mangle and queues

Hello, I was seeing the packet flow diagram and when I test the performance I found somethings I don´t understand: 1.Why if i put the packet mark in the forward chain the my queue can´t take place in global-total??? 2.Why if i put the packet mark in the postrouting chain the my queue can´t take plac...
by rgpmikrotik
Wed May 30, 2007 4:39 pm
Forum: General
Topic: Bridge
Replies: 0
Views: 424

Bridge

Hello, i have my MT with 2 ethernet interfaces, which are configurated as a bridge. Now I want to separate the Upload/Download traffic, so I put the marks in the forward chain, then I put the upload quueue in Global-out and the download in Global-total (both interfaces are in the postrouting chain, ...
by rgpmikrotik
Tue May 29, 2007 6:43 pm
Forum: General
Topic: Bridge Interface
Replies: 0
Views: 397

Bridge Interface

Hello, I´m using my mtk with 2 ethernet interfaces, and i´m doing source nat. I read that you can use a bridge interface, so only 1 Ip address is necessary for my Mt, I´ll try to configurate my Mtk as bridge, but i wan´t to know the advantages and disadvantages that has my mtk working like that (bri...
by rgpmikrotik
Tue May 29, 2007 5:36 pm
Forum: General
Topic: GIZMO + NAT
Replies: 0
Views: 371

GIZMO + NAT

Hello, i´m using a MT as router for my local net: Inet---------MT---------Local net So I want to mark the up/down traffic for gizmo separatelly, but i want to use the ports used in internet (the publics, no the local ports asigned by my MT), in the download traffic that is easy, I put the mark in th...
by rgpmikrotik
Tue May 29, 2007 3:24 pm
Forum: General
Topic: The same mark for different ports
Replies: 1
Views: 492

The same mark for different ports

Hello, I´m using queue tree, and I want to use the a software for Voip (gizmo), this soft uses:
TCP 5005
TCP 7070
UDP 64064
UDP 5004
etc

Can I use different packet mark rules (in mangle) with the same mark name? So I define just one queue.
by rgpmikrotik
Tue May 29, 2007 3:19 pm
Forum: General
Topic: Connection-mark
Replies: 3
Views: 765

Connection-mark

Hello I wan´t to know when is necessary to use connection marks, I´m using just packet marks without connection marks and I can´t see why I should use connection marks (What is the difference in using them?). Thanks
by rgpmikrotik
Tue May 29, 2007 2:55 pm
Forum: General
Topic: Problem with queue download/upload configuration
Replies: 4
Views: 1012

Re: Problem with queue download/upload configuration

yoy can do queue tree and they work together with the simle queue dinamically created by pppoe server. I think you are putting the queue in the wrong interface or you are marking the packets in a wrong place, please see the way wich follows the packets when enters to your MT: http://www.mikrotik.com...
by rgpmikrotik
Mon May 28, 2007 5:32 pm
Forum: General
Topic: mangle up/down traffic
Replies: 5
Views: 1381

Re: mangle up/down traffic

I have:: My ISP --------------- My MT-------------Clients (192.168.1.0) I´m doing nat, I was doing that: For Upload: --Firewall Mangle: src add 192.168.1.0/24 mark packet --Queue Tree: parent:global-in For Download: --Firewall Mangle: dst add 192.168.1.0/24 mark packet --Queue Tree: parent:global-ou...
by rgpmikrotik
Mon May 28, 2007 4:53 pm
Forum: General
Topic: mangle up/down traffic
Replies: 5
Views: 1381

Re: mangle up/down traffic

I think i´m finding the problem, Can I put more than 1 mark in the same chain to a packet?, how can i mark all the upload traffic, and then put to the packets another mark (for example tcp packets, etc)?
by rgpmikrotik
Mon May 28, 2007 3:57 pm
Forum: General
Topic: mangle up/down traffic
Replies: 5
Views: 1381

mangle up/down traffic

Hello, i´m trying to use queue tree, i could mark the packets for an especific protocol (ej tcp) and i could put these packets in diferent queues for the upload and download traffic (for tcp). Now i want to do that but first i´d like to mark all the traffic upload in a queue and all the download in ...
by rgpmikrotik
Mon May 28, 2007 2:59 pm
Forum: General
Topic: Passthrough
Replies: 2
Views: 760

Passthrough

Hello, i don´t understand which is the role of the option "passthrough" placed in "mangle", you can put yes/no, what does it mean?? thanks.
by rgpmikrotik
Thu May 24, 2007 5:32 pm
Forum: General
Topic: packet flow
Replies: 1
Views: 551

packet flow

I have my MT working with 2 interfaces ethernet, one public (conected to my Isp) and the other private (conected to my local net), and I´m doing src-nat. My doubt is in the grafic which is in packet flow (in MT page), input interface is my public interface and output interface is my private interfac...
by rgpmikrotik
Wed May 23, 2007 4:37 pm
Forum: General
Topic: BW limitations + QoS with simple queues
Replies: 4
Views: 950

I´m doing nat, and how can i do for apply an tree for upload and other for download, I can do it.
by rgpmikrotik
Wed May 23, 2007 4:18 pm
Forum: General
Topic: BW limitations + QoS with simple queues
Replies: 4
Views: 950

I was wrong, mt check the first rule and then doesn´t see the queue for each user
by rgpmikrotik
Wed May 23, 2007 4:08 pm
Forum: General
Topic: BW limitations + QoS with simple queues
Replies: 4
Views: 950

BW limitations + QoS with simple queues

I was looking that with simple queues i can work with marks (made in mangle) and with priority, besides I can choose another simple queue as parent for a simple queue (like queue tree). So I cuold be thinking in implementing both, bandwith control and QoS using just simple queues (coul´d I?), in thi...
by rgpmikrotik
Tue May 22, 2007 5:14 am
Forum: General
Topic: Simple Queue Catch All
Replies: 20
Views: 3919

1) I´m using only simple queues for the total bandwith & for each user bandwith, so, when a queue is matched, then the follow is executed, the process doesn´t finish. (at least that work) 2)When you configure simple queue you can choose another simple queue as parent. What is the diference with queu...
by rgpmikrotik
Mon May 21, 2007 6:41 pm
Forum: General
Topic: When i have to use queue tree???
Replies: 2
Views: 645

When i have to use queue tree???

I have my mikrotik working as a pppoe server, it makes dinamically simple queues for each client. I am controling the total bandwith with another simple queue. My question is: When is essencial using queue trees??, can i do with simple queues the same as i can with queue tree?? why is called "simple...
by rgpmikrotik
Thu May 17, 2007 6:01 pm
Forum: General
Topic: Q in pppoe interfaces
Replies: 0
Views: 392

Q in pppoe interfaces

hello, if i put a queue tree with a pppoe interface (client) as a parent (eg:<pppoe-pueba>) with max limit 256k, this is the up/down bandwith or both up and down are limited at 256k (eg the limit is 128/128 if the client pppoe is trying to downloading and uploading at higher rates)
by rgpmikrotik
Thu May 17, 2007 5:32 pm
Forum: General
Topic: Source and dest nat
Replies: 2
Views: 523

if i put that in to port my mkt doesn´t change the original port? sip works with random ports, so i want to keep the original port
by rgpmikrotik
Thu May 17, 2007 4:37 pm
Forum: General
Topic: Parent queue help
Replies: 12
Views: 1900

excusme, but if you make a simple queue you can´t use it as parent for another child queues, i´m wrong?
that is because i´m using a pppoe server (mtk) wich generate dinamically simple queues for each client, and i want to make diferent childs for each client but i couln´t, coul i do it?
by rgpmikrotik
Wed May 16, 2007 6:02 pm
Forum: General
Topic: Source and dest nat
Replies: 2
Views: 523

Source and dest nat

I want to know if i can do s/d nat with my mtk but without changing the ports used, only the ip address, that is for putting an sip telephone in my private network (wich uses random ports), using only one private IP address (doing NAT).
by rgpmikrotik
Wed May 16, 2007 4:40 pm
Forum: General
Topic: tree queue vs simple queue
Replies: 1
Views: 670

tree queue vs simple queue

if i have a queue tree and a simple queue wich one is executed at first? can´t i choose a simple queue as parent for a queue tree? i`m trying to use that for pppoe clients (simple queues are generated dinamically by my mkt pppoe server) to limit their bandwith not only for example 256k but also defi...
by rgpmikrotik
Wed May 16, 2007 4:35 pm
Forum: General
Topic: Qos for pppoe clients
Replies: 2
Views: 935

if i want to provide for every client for example

20kbps for http
10kbps http
etc

how can i do it? i have to do tree queues statically for every clients?
by rgpmikrotik
Tue May 15, 2007 6:28 pm
Forum: General
Topic: SIP + NAT
Replies: 1
Views: 663

SIP + NAT

hello i´m doing nat with a mtk, if i want to use VoIP (SIP) i can work with the port used for singaling (5060) and the rtp ports between 8000-20000. There is another way?
can i use sip doing nat??
by rgpmikrotik
Tue May 15, 2007 5:17 pm
Forum: General
Topic: Unknown messages when I conect my Mkt in Internet
Replies: 6
Views: 1118

ok, i think i understood, it doesn´t do nothing with the forward traffic, thanks
by rgpmikrotik
Tue May 15, 2007 4:57 pm
Forum: General
Topic: Unknown messages when I conect my Mkt in Internet
Replies: 6
Views: 1118

I had that configuration by default name port available from ftp 21 0.0.0.0/0 ssh 22 0.0.0.0/0 telnet 23 0.0.0.0/0 ssh 22 0.0.0.0/0 www 80 0.0.0.0/0 I disabled ssh, wich i had problems, if i had have problems with www for expample and i disable here www available for 0.0.0.0/0 my clients wont be abl...
by rgpmikrotik
Tue May 15, 2007 4:33 pm
Forum: General
Topic: Unknown messages when I conect my Mkt in Internet
Replies: 6
Views: 1118

thank you i´ll try to do it.
That is the same of making a filtering in ip/firewall?
by rgpmikrotik
Tue May 15, 2007 4:14 pm
Forum: General
Topic: Unknown messages when I conect my Mkt in Internet
Replies: 6
Views: 1118

Unknown messages when I conect my Mkt in Internet

Hello i´m configurating an mtk as a pppoe server for an ISP, it has 2 interfaces, 1 for the private net, an the other is conected to internet with a public IP address. The problem is that when i conect the public interface to internet, a lot of messages appears that i don´t understand (from diferent...
by rgpmikrotik
Tue May 15, 2007 4:02 pm
Forum: General
Topic: Qos for pppoe clients
Replies: 2
Views: 935

Qos for pppoe clients

Hello, I have configured an mtk as a ppoe server, that generates dinamically diferents simple queues for each client pppoe. I want to use a tree queue for each client. In the profile of pppoe client i would like to choose not only a bandwith for up/down, besides i want to administrate this bandwith ...