Can the PPPoE client also ping 220.127.116.11 successfully?setting a computer to 18.104.22.168 and connecting it to the switch allows me to ping the client's public IP
with which key usage flags?3. Create server certificate.
When importing the CA created without a CRL host I would expect the flags to be ATIn Client:
1. Import CA certificate (LAT)
Supposedly fixed in 6.48, from the changelogEven with fresh versions of ROS, reset configuration sets internal IP to bridge, BUT QuickSet sets internal IP to ether2. I have never figured out the real reason.
Yes, for the CRS226 to retain wire-speed switching. As the CCR1016 doesn't have a hardware switch just use the usual VLAN-aware bridge setup for that.Or other methods as mentioned here https://wiki.mikrotik.com/wiki/Manual:C ... s_examples
That would become a single point of failure - takes out both WAN connections. Engineering redundancy solutions which does not make your setup less reliable is not straightforward.Hmm what about a managed switch in between?
They were examples of subnets attached to the VLAN interfaces at each end. Your original example has two VLANs but only one subnet at each end which is insufficient.What are: 192.168.11.0/24 + 192.168.12.0/24 and Remote: 192.168.21.0/24 + 192.168.22.0/24 ?
Be aware that if you add an EoIP interface with an MTU<1500 to a bridge it will impact any traffic between local bridge ports too, usually breaking things.I have set 1300 MTU on the EoIP tunnel. Additional rule set MSS to 1250.