Community discussions

MUM Europe 2020

Search found 610 matches

by cibernet
Tue May 31, 2016 6:09 am
Forum: Forwarding Protocols
Topic: Second VPLS not working with TE MPLS
Replies: 0
Views: 543

Second VPLS not working with TE MPLS

Hi, how are you, after a few years out of the networking word, I'm back :P. Ok, so, now the issue :) I have a LAB setup to test MPLS over OSPF, with TE tunnels, the problem is that, only one VPLS is active (DATA), the other one (VOIP), stays down. I have setup 2 loopback address, so I can send data ...
by cibernet
Tue Apr 29, 2008 8:48 am
Forum: General
Topic: save of Logging file
Replies: 1
Views: 660

Re: save of Logging file

How can I save the events ( history ) logs in web interface & delete this file after that to let the router work faster when I want see the log file ,, also , after saving this data ...which application will display this data ( using windows) Hi, you can use a remote sylog server, search the forum,...
by cibernet
Tue Apr 29, 2008 8:43 am
Forum: Wireless Networking
Topic: Wireless Sniffer...
Replies: 2
Views: 1738

Re: Wireless Sniffer...

No, you can`t do that...
by cibernet
Wed Nov 21, 2007 2:27 pm
Forum: General
Topic: help
Replies: 1
Views: 539

Re: help

can anyone share his export of mikrotik (specially the mangle + all the queues)
Can you please tell us what is your particular problem?
by cibernet
Mon May 21, 2007 9:40 am
Forum: General
Topic: StarOS AP to Mt clients
Replies: 3
Views: 999

You might be better off changing putting MT on the AP , Staros drops off all the clients every time you want to add a route , change an address etc.
I second this
by cibernet
Sun May 20, 2007 5:29 am
Forum: General
Topic: RB532A for link aggregation - How's the performance?
Replies: 8
Views: 1266

rb500 series support only 2 pcmcia interfaces.
2 miniPCI interfaces.
by cibernet
Sun May 20, 2007 5:19 am
Forum: Wireless Networking
Topic: Correct Power setting for SR5
Replies: 4
Views: 1303

What about the SR9?

On auto, mine shows 26dB tx with 2.9.38.

Even running DD-WRT x86 version, it displayed up to 28dB when listing tx power.

Dunno about Madwifi in regular Linux, haven't tried it yet.

SR9 have a power offset of 12db, see the pdf for more information.

Best regards
by cibernet
Sun May 20, 2007 3:52 am
Forum: General
Topic: use another dns to my network
Replies: 2
Views: 799

Re: use another dns to my network

hi friends

i have a problem with my dns server and i have mk in my network and want to use another dns from a friend , is there a rule to permit my network use the dns of my friend??? , i made somes rules but is not working

thanx
Change the dns server address under IP - DNS.

Regards.
by cibernet
Sun May 20, 2007 3:44 am
Forum: Wireless Networking
Topic: UBNT power settings
Replies: 1
Views: 889

Re: UBNT power settings

So we're supposed to leave the power settings at default for the maximum safe power. What if we want less than maximum power? I like the greater power output at 54 mb, but do not want the higher power at lower modulations. Has any work been done in v3 so that the power settings are more accurate? S...
by cibernet
Sun May 20, 2007 3:35 am
Forum: Wireless Networking
Topic: WDS Limited
Replies: 2
Views: 972

Re: WDS Limited

Does anyone know how many AP's running WDS you can have connected to one RB532 With Router OS with one radio card ?

The links are all AP's running WDS to the main AP only and no WDS between AP's

Cheers


Piri
WDS creates latency, i suggest not to connect more than 8 WDS clients.

Best regards
by cibernet
Sun May 20, 2007 3:31 am
Forum: Wireless Networking
Topic: Correct Power setting for SR5
Replies: 4
Views: 1303

Re: Correct Power setting for SR5

I have a PtP link with a -47 rssi. I need to turn the power down to get it around -65. I have read on the forum that the power settings in Mikrotik are not correct with the SR5. I have the power turned down to 8db which brings it to -57, but what are the correct values for determining the correct p...
by cibernet
Sun May 20, 2007 3:29 am
Forum: Wireless Networking
Topic: Wireless logging on to MT user manager using winbox?
Replies: 2
Views: 764

Re: Wireless logging on to MT user manager using winbox?

Hi, is it possible to logon to the user manager/console wirelessly? Ta
What do you mean? You can connect to the userman from everywhere you have ip connection to the router (userman).

Best regards
by cibernet
Sun May 20, 2007 3:24 am
Forum: General
Topic: Preventing !
Replies: 1
Views: 707

Re: Preventing !

Hi all i have to quastion .. first : how could i prevent an MAC address in my hotspot to use the service second : how could i prevent my user in my hotspot to visit some spicific site . thanks for reading and/or answering .. BEST REGARDS LEO Check the documentation here: http://www.mikrotik.com/tes...
by cibernet
Sun May 20, 2007 3:20 am
Forum: General
Topic: StarOS AP to Mt clients
Replies: 3
Views: 999

Re: StarOS AP to Mt clients

Sorry posted to wrong area... Does any one know if the 10mhz channel option is compatable with StarOS cloaking? I have a situation where I have a running StarOS AP and need to connect Mikrotik clients. It seems to work fine in standard (20MHZ) channels but have not gotten it to work with the smalle...
by cibernet
Sun May 20, 2007 3:17 am
Forum: General
Topic: Traffic shaping pppoe sessions
Replies: 2
Views: 1190

Re: Traffic shaping pppoe sessions

Does mikrotik have the ability to queue or traffic shape pppoe sessions terminated from a core device (Redback) not by mikrotik? I understand that some appliances cannot decipher pppoe packets because of it's encapsulation. Can mikrotik do this? Any help is appreciated. No, you can´t do that. Best ...
by cibernet
Sun May 20, 2007 3:13 am
Forum: General
Topic: where is RouterBoard rstp-bridge-test in ver 2.9.42?
Replies: 1
Views: 765

Re: where is RouterBoard rstp-bridge-test in ver 2.9.42?

Seems to be missing from the RouterBoard versions.

Its there for the i86 boards for the new version.

Is it still available????
You can download it from here: http://www.mikrotik.com/download/rstp-b ... .43-ns.npk

Regards
by cibernet
Sun May 20, 2007 3:11 am
Forum: General
Topic: Upgrade
Replies: 1
Views: 670

Re: Upgrade

I need to upgrade to 2.9.42 from v2.9rc7 .

Is there a fee for this?

?

Thanks,
Check this link: http://wiki.mikrotik.com/wiki/All_about_licenses

Best Regards
by cibernet
Mon May 14, 2007 10:55 am
Forum: General
Topic: RouterOS 2.9.43 Released
Replies: 24
Views: 3329

RouterOS 2.9.43 Released

What's new in 2.9.43: *) routing-test - changes that are aimed at increasing perfomance and reducing memory usage: limit number of outstanding bgp updates, sending feeds to many peers uses bounded amount of memory; *) fixed bug - telephony was crashing whenever voice-port was changed; *) ups - fixed...
by cibernet
Fri Mar 23, 2007 1:00 am
Forum: RouterBOARD hardware
Topic: Where is RouterBOOT 2.7??
Replies: 4
Views: 2423

Holding down the button will boot with the 2.7 BIOS but if the RB532 gets rebooted it goes back to 2.6. The only option under "system routerboard" are for 2.6 so no way to set it permenantly there. When will 2.7 be online?
Try this: http://www.routerboard.com/files/rb-2.7/adm5120-2.7.fwf

Regards
by cibernet
Thu Dec 21, 2006 3:07 am
Forum: Wireless Networking
Topic: HotSpot setup on WDS network
Replies: 8
Views: 2224

Re: otro foro en español , foro in spanish

otro foro en español , forum in spanish

http://www.noczero.com/foromikrotik/phpBB2/
You're on a personal crusade... :roll: :lol:
by cibernet
Thu Dec 21, 2006 3:04 am
Forum: Wireless Networking
Topic: Link NLOS
Replies: 5
Views: 1720

visita el foro mikrotik en español http://www.noczero.com/foromikrotik/phpBB2
1- Don´t double post.
2- As I said on other topic "STOP SPAMMING"
by cibernet
Thu Dec 21, 2006 3:00 am
Forum: Wireless Networking
Topic: inexperienced
Replies: 7
Views: 1365

Re: inexperienced

Hello expert Friends! I am an inexperienced apprentice of the wireless connections, single needed to know if somebody of this community knows how to speak Castilian, because not eh found nobody that can make understand me completely like administering my ap´s. Greetings! :lol: visita el foro mikrot...
by cibernet
Tue Dec 05, 2006 11:24 pm
Forum: Wireless Networking
Topic: 2327------ client 2.462
Replies: 4
Views: 1134

Re: 2327------ client 2.462

can a AP with 2327 of frequency connect to a dlink dwl 2100 acces point with 2.462 frequency as a client???
No........

ok :)

is there any range can connect with 2327 other that its self
no.....
by cibernet
Tue Dec 05, 2006 10:46 pm
Forum: Wireless Networking
Topic: 2327------ client 2.462
Replies: 4
Views: 1134

Re: 2327------ client 2.462

can a AP with 2327 of frequency connect to a dlink dwl 2100 acces point with 2.462 frequency as a client???
No........
by cibernet
Mon Dec 04, 2006 7:04 am
Forum: The User Manager
Topic: Language Support for Usermanager
Replies: 13
Views: 4136

ok, let's vo........this. ---- NO, i need userman friendly for customizing, and i need fast routing and access, for me international langugue is enough.. ,.....if not, how much memory for it, too much download file scripts..... and bandwith too..???? ......i think, RouterOS is not same MSWindows pe...
by cibernet
Mon Nov 27, 2006 3:03 pm
Forum: Wireless Networking
Topic: Problems with interference on WiFi?
Replies: 11
Views: 1936

Re: Problems with interference on WiFi?

This sounds like the answer to all our problems!

And the formulas are there to prove it!

http://j-walk.com/other/wifispray/

Especially recommended for all beginners in MikroTik! Lower your noise floor without changing hardware!


8) :lol: 8)
IT WORKS!!!!!!!!!!!!! :D
by cibernet
Sun Nov 26, 2006 4:15 am
Forum: Wireless Networking
Topic: RB532, CM9, and high pings
Replies: 28
Views: 5551

2) also today I'm going to plug a mPCI card used on the 2000AP+ into RB523. I hope that the RB support Texas Instrument Chipset. 3) I want to try INTEL chipset PROSET 2200 wireles mPCI of my laptop monted on the RB. Those chipsets are not supported by MikroTik. check here http://www.mikrotik.com/do...
by cibernet
Sat Nov 25, 2006 1:06 am
Forum: Wireless Networking
Topic: Link at 8Km
Replies: 2
Views: 962

Re: Link at 8Km

Hy..I want to build a Link with 2 Mikrotik RB532 and two MiniPCI SR5 at 400 mw and 2 Parabolic dishes of 29dbi at a distance at 8 Km.I want to transport over this Link 60-80 Mbps but only in a single way not in full duplex mode.Please give me an advice if such a Link is possible.. You will need a p...
by cibernet
Wed Nov 22, 2006 1:13 pm
Forum: General
Topic: New RouterOS BETA is out: v3.0beta3
Replies: 74
Views: 18455

Re: CPU Load 100%

i changed our test station to v3beta3 alls working fine but i see the cpu load stays on 100% all the time its a rb500

done bandwidth test everything great only cpu load at 100%

???????
disable the "dude" package...

Best regards
by cibernet
Wed Nov 22, 2006 8:50 am
Forum: General
Topic: Shared elements of Windows
Replies: 3
Views: 1191

Re: Shared elements of Windows

Hello People: I have a RouterBorard 532 with 4 APs (wlan1, wlan2, wlan3, wlan4) with a Bridge (bridge1) where are these 4 APs. I want that each one of my clients has exit to Internet and that cannot use shared resources of Windows using my APs like bridge between its machines. I want that they sing...
by cibernet
Thu Nov 16, 2006 5:22 pm
Forum: General
Topic: PPPoE Issue (2.9.35)
Replies: 8
Views: 1697

cibernet - did you try with the new (presumably fixed) ppp package for 2.9.35 Normunds posted yesterday?

Best regards,
Christian Meis
No, but i will, and post the verdict here :P


Best Regards
by cibernet
Thu Nov 16, 2006 2:23 am
Forum: General
Topic: PPPoE Issue (2.9.35)
Replies: 8
Views: 1697

Same issues here (ROS 2.9.35), users disconects every minute... Sent .rif file to MT.-


Best Regards
by cibernet
Wed Nov 15, 2006 4:47 am
Forum: General
Topic: 2.9.35 PPPoE - Still ghosting
Replies: 11
Views: 2460

Re: 2.9.35 PPPoE - Still ghosting

Just wanted to let the MT people know that we are seeing ghosting and connection initiation problems with PPPoE on 2.9.35 - from the changelog, it looks like you've been fighting this for a whle now. If you'd like a support.rif please send me an email and I'd be happy to provide it. You should send...
by cibernet
Fri Nov 10, 2006 1:28 pm
Forum: General
Topic: upgrade the version
Replies: 3
Views: 975

IOS? :P
by cibernet
Wed Nov 08, 2006 3:19 am
Forum: General
Topic: Routers reboot a couple of times a day
Replies: 2
Views: 1033

Re: Routers reboot a couple of times a day

I have a number of RouterOS devices that seem to reboot a couple of times a day. All of them are built on x86 hardware of different types (different motherboards, ethernet cards, etc). The Routerboard devices that I have don't seem to have this problem and stay up for months and months. Its only th...
by cibernet
Thu Nov 02, 2006 7:56 pm
Forum: RouterBOARD hardware
Topic: RB 532 Power!
Replies: 2
Views: 1506

Re: RB 532 Power!

Hi all, We will plan to use RB 532A AP mode.. However when i travel in this forums found some entry that said RB532 can't handle more than 20 high BW user.. So i wonder your experiments.. I will plan use PPPoE and also want BW Limitation with RB 532.. Additionally use one more card to backbone conn...
by cibernet
Fri Oct 27, 2006 4:18 am
Forum: The Dude
Topic: Upgrading RouterOS via Dude
Replies: 6
Views: 3178

Re: Upgrading RouterOS via Dude

I've looked at a couple of posts regarding upgrading the networked elements in the dude (running Router OS) but haven't really found a 'how-to'. I've got a bunch of systems (x86 and RB532s) and I can't seem to find 'how to use the upgrade/force-upgrade feature' in the Dude. Auto-upgrade referencing...
by cibernet
Fri Oct 27, 2006 2:03 am
Forum: General
Topic: blocking extensions for p2p
Replies: 1
Views: 982

Re: blocking extensions for p2p

hi

is there a way to block specific extension files (not all) used by p2p softwares?

10x
No

Regards
by cibernet
Thu Oct 19, 2006 1:50 pm
Forum: General
Topic: RouterOS 2.9.33 Released
Replies: 2
Views: 1359

Re: upgrade from 2.9.24 to 2.9.33

can i upgrade without any action first ?, i mean must i backup the existing configuration in my router ?


thx
deden
Yes.. but is good to save a backup just in case...


Regards
by cibernet
Thu Oct 19, 2006 1:43 pm
Forum: General
Topic: RouterOS 2.9.33 Released
Replies: 2
Views: 1359

RouterOS 2.9.33 Released

What's new in 2.9.33: *) fixed bug - dhcp client could use empty MAC address on vlan over wlan interface; *) added support for Option G3 PCMCIA card (Vodafone UMTS); *) fixed bug - PPPoE server could lock up after reboot if many clients were connecting at a same time; *) fixed bug - sometimes ghost ...
by cibernet
Tue Oct 17, 2006 11:31 pm
Forum: Wireless Networking
Topic: Standalone Senao AP
Replies: 1
Views: 685

Re: Standalone Senao AP

I have been using my Senao for internet service in my locality and will like to incoporate Mikrotik router soonest. Please, I need to know how to configure an ethernet card as WLAN and interface for my standalone Senao AP with the Mikrotik RouterPC OS. I will appriciate suggestion and configuration...
by cibernet
Tue Oct 17, 2006 11:27 pm
Forum: RouterBOARD hardware
Topic: Overclocking the rb532...opinions?
Replies: 23
Views: 10376

I just have upgrade RB 532 with mt 2.9.31 to 2.9.32 and there is no cpu-frequency=330MHz !
MT said that will be fixed on 2.9.33

Regards
by cibernet
Fri Oct 13, 2006 1:53 am
Forum: Wireless Networking
Topic: CPE unit.
Replies: 33
Views: 3838

Re: Nat

I am just checking and NAT is not setup

Mark
Well, you need to NAT....
ip firewall nat add chain=src-nat out-interface=wlan1 action=masquerade
by cibernet
Fri Oct 13, 2006 12:49 am
Forum: Wireless Networking
Topic: CPE unit.
Replies: 33
Views: 3838

Re: CPE unit.

Hi, I have setup a CPE unit. The ethernet interface has a static address and the wlan has a dhcp client setup. The wlan has been allocated an ipaddress from the dhcp server. The problem I am having is that no traffic seems to be routing from the ethernet side. i.e I cannot browse the internet. Plea...
by cibernet
Thu Oct 12, 2006 8:34 pm
Forum: General
Topic: How to sum two or three wireless link?
Replies: 7
Views: 2461

Hi Cibernet,

I've found bonding examples on wiki, exactly what I need!

Thank You for help!

Paolo
:D
by cibernet
Thu Oct 12, 2006 8:06 pm
Forum: General
Topic: How to sum two or three wireless link?
Replies: 7
Views: 2461

Re: How to sum two or three wireless link?

Hi, It's possible to sum two radio links for increase the bandwidth? I need to transport a 20 Mbit/sec DSL connection to about 20 Km of distance... for obtain a great, stable and redundant wireless link, I've thought to activate two or three radio link and sum it. It's possible? If yes, how I can m...
by cibernet
Thu Oct 12, 2006 7:55 pm
Forum: General
Topic: Upgrading 2.8.27 to 2.9.32
Replies: 4
Views: 2836

Re: Upgrading 2.8.27 to 2.9.32

Check the licence... and contact support@mikrotik.com also read: http://wiki.mikrotik.com/wiki/All_about_licenses The license is fine, the box works great, I want to upgrade to 2.9. I've read that page.. It says nothing about 2.8, or my issues from the logfile, so its of little help to me. I figure...
by cibernet
Thu Oct 12, 2006 7:14 pm
Forum: General
Topic: Upgrading 2.8.27 to 2.9.32
Replies: 4
Views: 2836

Re: Upgrading 2.8.27 to 2.9.32

Upon following the upgrade guide, and placing the needed package files into the mikrotik, and rebooting, i get this.. oct/12/2006 15:58:55 installation failed: license doesn't support new version of system oct/12/2006 15:58:55 installation failed: license doesn't support new version of advanced-too...
by cibernet
Thu Oct 12, 2006 6:52 pm
Forum: General
Topic: RouterOS 2.9.32 Released
Replies: 16
Views: 4441

RouterOS 2.9.32 Released

What's new in 2.9.32: *) fixed bug in PPPoE, PPTP and L2TP - rate limiting queue addition failed sometimes; *) fixed bug in PPPoE, PPTP and L2TP - after reboot 100s of users reconnecting can make some connections non working; *) fixed bug in PPPoE, PPTP and L2TP - some logged out users could still b...
by cibernet
Fri Sep 29, 2006 4:11 am
Forum: General
Topic: how to mark packets comming to a host in lan (nat)
Replies: 5
Views: 5126

i know that, but my router knows which packets are for 172.16.0.27 (my local pc)... how can I mark them in mangle... so then apply some speed limits in queue tree... sorry if my questions are stupids, but this forum is my only source of learning MT stuff... Check the interface... youre using WAN as...
by cibernet
Fri Sep 29, 2006 1:11 am
Forum: General
Topic: how to mark packets comming to a host in lan (nat)
Replies: 5
Views: 5126

Re: how to mark packets comming to a host in lan (nat)

i've got this in mangle and 2 & 3 work, 0 and 1 not. i want to mark every incomming packet from internet to host 172.16.0.27 to do something with them in QUEUE TREE every packet from 172.16.0.27 is well marked... but not packets to 172.16.0.27 0 ;;; Excedidos_Download_Connection chain=prerouting in...
by cibernet
Wed Sep 27, 2006 10:33 pm
Forum: General
Topic: Proxy default expiration time
Replies: 1
Views: 1075

Re: Proxy default expiration time

Hi, i just read in docs that web sites that don't specify caching instructions expire from cache in 72 hours. We had a problem with a customer that said that some pages did not update until 72 hours had passed. Can we change that default expiration time? Do you have any other suggestion? Thanks Try...
by cibernet
Sat Sep 23, 2006 8:05 pm
Forum: Wireless Networking
Topic: missing post!
Replies: 5
Views: 1206

I thought some threads were disappearing..i just figured i read the info else where...

mods: what is the policy on thread removal?

tks
http://forum.mikrotik.com/faq.php
by cibernet
Thu Sep 21, 2006 8:03 pm
Forum: General
Topic: Winbox Feature suggestion.
Replies: 37
Views: 13332

Re: Winbox Feature Suggestion

Another issue: passwords should not be revealed in winbox. It is very annying when i open dialog with passwords shown and someone is near me. I am not used to an idea that passwords are readable so I have no habbit not to open such dialog with third party presence, and it is quite strange if I have...
by cibernet
Wed Sep 20, 2006 2:33 am
Forum: General
Topic: QOS for Upload
Replies: 5
Views: 1864

Re: QOS for Upload

Recently i started using RouterOS 2.9.6, everything is nice, i like the system. Before it i used m0n0wall and smoothwall, they are great, but i needed more functionality. So, i installed the system and tried to prioritize upload traffic. I have a cable connection with 1000 kbits donwstream and 400 ...
by cibernet
Sun Sep 17, 2006 3:11 am
Forum: The User Manager
Topic: R&D making mikrotik work with Emerald Radius
Replies: 1
Views: 1902

Re: R&D making mikrotik work with Emerald Radius

Hi Guys, Has anyone ever been successful in making mikrotik hotspot authentication to work with Emerald radius? I am partially successful because the mikrotik and the emerald communicate with each other. My problem, is that i keep on getting the "Port not allowed" error. Even if the ports are defin...
by cibernet
Thu Sep 14, 2006 2:41 am
Forum: General
Topic: HOW MAX CLINTS CAN CONECT WALN
Replies: 1
Views: 1420

Re: HOW MAX CLINTS CAN CONECT WALN

I have lan card Wireless chipsit type is Atheros 5212
routerOs 2.9.27 level 6

how max clints can conect online and work ??????
1)Wrong forum to post
2)Search the forum archive, it was been discused many times before
by cibernet
Tue Sep 12, 2006 10:07 pm
Forum: General
Topic: How Prevent User Change IP Address?
Replies: 3
Views: 1938

Re: How Prevent User Change IP Address?

Hi all, I'm Newbie in Mikrotik, i have question about Mikrotik Router. - I use Access point Mikrotik 2.9XX,How to prevent/Block user change IP Address each other base Mac Adress? - Does Mikrotik have feature to solve ip conflict? How to solve my problem? anyone can help me? thank's for help. Static...
by cibernet
Tue Sep 12, 2006 8:23 pm
Forum: Wireless Networking
Topic: AP client subnet !!!!
Replies: 19
Views: 3030

mmmmmmmm , no one using ap clients ?? so hoe does ur client connect to ur networks ??
C' on dude, if you don't ask SMART questions no one will give you an answer, BTW you should google about TCP/IP networiking and will find an answer

Best regards
by cibernet
Tue Sep 12, 2006 8:18 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 26638

Sorry, Another thing, I want to have one WAN to be used only for VOIP. I know I have to bond ports 5060-5061 to that wan but How do I do that? Can you explain or send me the code on how to do this? Thanks Use routing marks, and use that's marks to route the traffic to the desired gateway.. Regards
by cibernet
Tue Sep 12, 2006 8:16 pm
Forum: General
Topic: How Prevent User Change IP Address?
Replies: 3
Views: 1938

Re: How Prevent User Change IP Address?

Hi all, I'm Newbie in Mikrotik, i have question about Mikrotik Router. - I use Access point Mikrotik 2.9XX,How to prevent/Block user change IP Address each other base Mac Adress? - Does Mikrotik have feature to solve ip conflict? How to solve my problem? anyone can help me? thank's for help. Static...
by cibernet
Tue Sep 12, 2006 6:10 pm
Forum: General
Topic: hotspot radius problem
Replies: 3
Views: 1262

Re: hotspot radius problem

gospoda iz cti prosili ukazat chto dolgno bit v pakete posilaemom ot radius servera na otkluchenie polzovateley hotspot. podskagite zachem vi udalaete moi soobsheniya iz foruma ?
Official language is ENGLISH...

Regards...
by cibernet
Tue Sep 12, 2006 12:55 am
Forum: Wireless Networking
Topic: rb100 serie versus rb500
Replies: 2
Views: 926

Re: rb100 serie versus rb500

I'm at the point of ordering more rb's for extension of my wireless network (Small wisp). Presently using 3x rb112 based unids. Why is rb500 serie still used for wireless purpose when 112 does the same for less money? Or has the 500 serie advantage above the 100 serie? Check the diferences on: http...
by cibernet
Mon Sep 11, 2006 5:59 pm
Forum: General
Topic: Nat - Masquarade
Replies: 1
Views: 1058

Re: Nat - Masquarade

My ISP gives me several public ip adresses. I have several subnets in my lan. What i want to do is to masquarade each subnet with a diferent public ip address. so i can have for example: subnet 192.168.0.0/24 masquarade behind xx.xx.xx.xx subnet 192.168.1.0/24 masquarade behind xx.xx.xx.xy subnet 1...
by cibernet
Sat Sep 09, 2006 9:50 pm
Forum: Wireless Networking
Topic: 2.4 GHz/AMP 400mw
Replies: 12
Views: 1868

:P
by cibernet
Tue Sep 05, 2006 10:09 pm
Forum: General
Topic: configuring cache from the beginning
Replies: 9
Views: 2220

'Web-proxy test' package provides even more useful information, 'ip proxy connections print' gives quite detailed input about current connections to the proxy.
Yes.. but have bugs... not for production...
by cibernet
Tue Sep 05, 2006 6:02 pm
Forum: General
Topic: configuring cache from the beginning
Replies: 9
Views: 2220

10x cibernet for your reply

the counter in the firewall - nat is counting now.
is there a way to know that the cache is really working?

10x again
Check the Webproxy Status....
ip webproxy monitor
by cibernet
Tue Sep 05, 2006 12:49 am
Forum: General
Topic: configuring cache from the beginning
Replies: 9
Views: 2220

1) Enable "Transparent Proxy"
2) Check the "in interface" it should be "LOCAL" not public....


Regards
by cibernet
Mon Sep 04, 2006 8:58 pm
Forum: General
Topic: Deny a IP
Replies: 3
Views: 1101

Re: Deny a IP

Hello...

How can I establish firewall rule (maybe input rule) for my DHCP server deny a IP to certain MAC address?
Yes you can...

Regards
by cibernet
Sun Sep 03, 2006 11:09 pm
Forum: General
Topic: how to manage yahoo compose mail upload
Replies: 4
Views: 1252

Re: how to manage yahoo compose mail upload

anytime somone is trying to attach a file my gateway keep timeout any remedy to this
??? :roll:
by cibernet
Sat Sep 02, 2006 4:53 am
Forum: RouterBOARD hardware
Topic: dhc server
Replies: 1
Views: 1163

Re: dhc server

please how do i configure my router to use dhcp server. i have license 4 os installed my pc.
Here: http://www.mikrotik.com/docs/ros/2.9/ip/dhcp


Best Regards
by cibernet
Fri Sep 01, 2006 4:45 pm
Forum: RouterBOARD hardware
Topic: router software crashed
Replies: 1
Views: 1130

Re: router software crashed

PLEASE HELP!

Using FTP: I tried upgrading a routerboard 230 from 2.84 to 2.9. I copied the routerboard install files and rebooted the router. I know have corrupted mikrotik software that does not boot at all. Any help would be ggreatly appreciated.
Try netinstall

Best Regards
by cibernet
Fri Sep 01, 2006 7:57 am
Forum: General
Topic: DHCP Access List
Replies: 1
Views: 1402

Re: DHCP Access List

Hello... I write you to ask about if possible to do the following: I have 200 PC in network and DHCP Server (Mikrotik) with a pool of 10 IP address por use of special users. All my network use static IP address, but if some one change its network configuration to obtain dynamic IP they will have ac...
by cibernet
Fri Sep 01, 2006 5:42 am
Forum: General
Topic: traffic prioritizing can't work correct
Replies: 8
Views: 1888

Thanks for reply, again. After i have readed manual carefully and try it again and again , I feel desperate really . why traffic priority can't work correct? I suggest the author of RouterOS manual to test what he wrote again! Follow the manual , the trafic prioriy of tree queue can't work correct....
by cibernet
Wed Aug 30, 2006 4:04 am
Forum: Wireless Networking
Topic: Need some help pls...
Replies: 3
Views: 717

Re: Need some help pls...

Hi all, Ill be happy if anyone can help me out. I am restructuring my network to only allow permitted macs in Access List under wireless to access that AP. When i copy all my macs there and remove the default authenticate botton on the wireless interface, it only seems to permit about 4 or 5 units ...
by cibernet
Tue Aug 29, 2006 10:42 pm
Forum: Scripting
Topic: how to make advertise like hotspot have?
Replies: 6
Views: 1836

:? Well... i get your point... but not post too many times the same... :P
by cibernet
Tue Aug 29, 2006 10:35 pm
Forum: General
Topic: Mangle Routing + Policy Routing Issue in 2.9.29
Replies: 2
Views: 1165

Re: Mangle Routing + Policy Routing Issue in 2.9.29

I'm having a problem in one of my routers that mangles public addresses from one isp out their gateway, but routes normal traffic out another gateway. I just upgraded this router to 2.9.26. This router was 2.9.18 when it was working. Anyone else have similar problems? If so, anyway to remedy the si...
by cibernet
Mon Aug 28, 2006 11:36 pm
Forum: General
Topic: traffic prioritizing can't work correct
Replies: 8
Views: 1888

Re: traffic prioritizing can't work correct

Sorry, I am not good at english. This is my problem: I creat a super simple TREE QUEUE, it inclued two leaves (leaf1/leaf2) only. When leaf2 need , i want leaf2 can use all bandwidth of my RouterOs. When leaf2 don't need , leaf1 can use all bandwidth that leaf2 not use. This is my rules(RouterOs is...
by cibernet
Mon Aug 28, 2006 11:28 am
Forum: Wireless Networking
Topic: problem with mikrotik and WDS
Replies: 3
Views: 870

Re: problem with mikrotik and WDS

Excuse my ingles badly, but he is urgent. Senao had 5 covering a main town, one and 4 repeaters. Buy rb532 and I put 2 to him minipci, one of 5,8 and another one of 2,4 400 Mhz of mw. Minipci of 2,4 reemplazaria to senao original. It works perfect but I cannot cause that it works with senao like wd...
by cibernet
Sun Aug 27, 2006 3:31 am
Forum: RouterBOARD hardware
Topic: RB532 Locks up on boot with APC UPS Attached
Replies: 9
Views: 2768

2.9.29 with the matching 2.9.29 UPS package.

Thanks,
Eric
Ummm... send support.rif to support@mikrotik.com


Best Regards
by cibernet
Sun Aug 27, 2006 3:23 am
Forum: RouterBOARD hardware
Topic: RB532 Locks up on boot with APC UPS Attached
Replies: 9
Views: 2768

Re: RB532 Locks up on boot with APC UPS Attached

Hi, I've seen a few posts that seem to be related to the same bug I'm trying to get around. It's getting cold up her in Northern Maine, and today I replaced a PC with a IDE flash module running Mikrotik with an RB532/A with 6-port daughtercard. When I boot the unit with an APC SmartUPS 1500VA attac...
by cibernet
Sun Aug 27, 2006 3:18 am
Forum: Wireless Networking
Topic: mikrotik os tx power readings
Replies: 7
Views: 1764

well the informations regarding the zcom xg-622h are very conflicting. zcom china tells you on their website 100mw, zcom uk tells you in their productflyer for their costumers 500mw,on their website its 316mw and i got told by a zcomax sales person (zcom uk subsidary) that 28.2 dbi (630mw!) at 1mbp...
by cibernet
Thu Aug 24, 2006 6:33 am
Forum: General
Topic: Only allow specific Address
Replies: 3
Views: 1089

Re: Anyone Can Helpp Me

Anyone Can Help Me Pleasee
You should first read http://www.mikrotik.com/docs/ros/2.9/ip/filter
before...

Best Regards
by cibernet
Thu Aug 24, 2006 6:30 am
Forum: General
Topic: Parent Proxy question ..
Replies: 9
Views: 1671

cibernet , thanx for help
ok , what is the advantage of using this proxy url ?? i can get the internet wether if i use it or not.
URL? are you talking about te IP address of the Proxy Server?
by cibernet
Thu Aug 24, 2006 3:56 am
Forum: General
Topic: Parent Proxy question ..
Replies: 9
Views: 1671

ok , if i put this url in my browser , does it passthrough MT web proxy ?
:shock: :roll: :lol: :?
by cibernet
Thu Aug 17, 2006 2:05 am
Forum: General
Topic: explanation of LOG messages
Replies: 4
Views: 1849

Re: explanation of LOG messages

Is there any documentation of the explanation of the messages that appear in en log...?? for example, what does this mean? wlan1: data from unknown device 00:0E:2E:54:EF:77, sent deauth Well...: wlan1: interface data from unknown device 00:0E:2E:54:EF:77: the data from device with that mac address ...
by cibernet
Thu Aug 10, 2006 2:34 am
Forum: Wireless Networking
Topic: [solved] what to do!? Routing question
Replies: 14
Views: 2205

Re: what to do!?

Hi! I got 3 APs (3 x Micronet SP918GK) and i wont to bridge them! I think with EoIP, right? I purchansed 3 TP-LINK cards TL-WN651G (Atheros AR5213). Now plz help with that EoIP bridge... 1st AP ip is 192.168.2.121 and interface wlan1 2nd AP ip is 192.168.2.122 and interface wlan2 3th AP ip is (gues...
by cibernet
Wed Aug 09, 2006 10:46 pm
Forum: Wireless Networking
Topic: Radio Mobile - Antenna files
Replies: 15
Views: 8301

I contacted Pac Wireless a while back to get antenna plots for some of their antenna's.. I converted the info they gave me into Radio Mobile .ant files.. Here are the plots for the 24db grids and the 13/19db panels in vertical polarity. I'll give Pac Wireless a call and see if they can get anymore ...
by cibernet
Sat Aug 05, 2006 9:22 am
Forum: General
Topic: Bridge Filter bug on Terminal
Replies: 7
Views: 1319

:D we will probably make a fix for this in 2.10.
:wink:
by cibernet
Sat Aug 05, 2006 9:20 am
Forum: General
Topic: Porn Block List
Replies: 4
Views: 5804

Re: Porn Block List

Does anyone have a porn block list?? There was once a topic on this.

Thanks

http://forum.mikrotik.com/viewtopic.php ... block+list

Best regards
by cibernet
Sat Aug 05, 2006 12:10 am
Forum: General
Topic: User manager
Replies: 3
Views: 1251

Re: fixed

i fixed this thing i was forgetting to select the use radius in secrets but now i am facing another problem user is not getting the ip i am choosing , the log says 0:57:59 pppoe,ppp,info <pppoe-0>: waiting for call... 20:57:59 pppoe,ppp,info <pppoe-joe>: authenticated 20:57:59 pppoe,ppp,info,accoun...
by cibernet
Wed Aug 02, 2006 5:11 pm
Forum: General
Topic: Traffic Shapping 2.9.17
Replies: 1
Views: 759

Re: Traffic Shapping 2.9.17

We have a Routeros 2.9.17 version like border router in our network.
How can I limit the traffic (2mb DW / 2mb US) for two datacenter subnets ???.

Thanks a lot.
http://www.mikrotik.com/docs/ros/2.9/root/queue
by cibernet
Tue Aug 01, 2006 5:56 pm
Forum: General
Topic: High CPU Load
Replies: 1
Views: 895

Re: High CPU Load

Is this normal for CPU usage? http://fileholder.net/cpu_usage_gateway.JPG This is on a P4 2.6Ghz with 1Gbyte RAM on Mikrotik 2.9.27. Its running as a gateway router and transparent cache. It connects to the Internet via a Cisco with 4 T1 circuits. It also does p2p queuing and some firewalling. It s...
by cibernet
Tue Aug 01, 2006 5:54 pm
Forum: General
Topic: Identify download using port 80
Replies: 8
Views: 1675

Hi,

is it possible for PPPoE users to use burst-limit, burst-time, max-limit ???

Dejan :roll:
Yes..
by cibernet
Mon Jul 31, 2006 7:51 pm
Forum: General
Topic: customers want print screen the winbox
Replies: 2
Views: 1987

Re: customers want print screen the winbox

HI! i have customer, and this customers want a command or something for print the winbox, i know, i can use the button screenprint in the keyboard, and paste in word, but the customer want print directly of winbox. Best regards Tell your customer that MT its not M$ Word.... Best Regards
by cibernet
Mon Jul 31, 2006 7:34 pm
Forum: General
Topic: Bridge Filter bug on Terminal
Replies: 7
Views: 1319

It's not a bug. So the choice seems to be pretty limited, yeah? :D [eugene@SM_BGP] interface bridge filter> add chain forward mac-protocol= Protocol name or number MacProtocol ::= [!]Protocol Protocol ::= ProtocolName | ProtocolNumber ProtocolName ::= ProtocolName36 | MacProtocol MacProtocol ::= ar...
by cibernet
Mon Jul 31, 2006 3:28 am
Forum: General
Topic: Bridge Filter bug on Terminal
Replies: 7
Views: 1319

Bridge Filter bug on Terminal

2.9.27 RSTP Bridge test There is a problem when I try to add in the terminal the pppoe-discovery and pppoe-session protocols, they dont exist... but on winbox they do.. So i add them on winbox, and the i export on terminal: [admin@Gaona Master] interface bridge filter> export / interface bridge fil...
by cibernet
Tue Jul 25, 2006 4:38 pm
Forum: General
Topic: New website design
Replies: 0
Views: 503

New website design

Nice :D
by cibernet
Wed Jul 19, 2006 7:47 am
Forum: Wireless Networking
Topic: changing channel
Replies: 2
Views: 725

Re: changing channel

Hi !

Haw can I change channel from configuration mode ?

Thanks !
Read before...http://www.mikrotik.com/docs/ros/2.9/
by cibernet
Mon Jul 17, 2006 12:20 am
Forum: The User Manager
Topic: Secondary HDD for log's
Replies: 7
Views: 3092

Point out the logs to a syslog server / device.. One interesting idea is a oice of freeware called syslog2odbc.. it accepts syslog messages and sends them to an ODBC store IE Access db or my favorite SQL server where you can slice and dice the logs at will !!! Things that make you go HMMMMMM..... C...
by cibernet
Thu Jul 06, 2006 2:46 pm
Forum: The User Manager
Topic: can i use User Manager on Lan or Wan?
Replies: 6
Views: 3238

Re: can i use User Manager on Lan or Wan?

hi MT ,

i have a question about User manager , can i use User Manager on Lan or Wlan?

i want to use it for people on the lan or wlan by user name and password .
so does it work or not?
Yes, you can use it
by cibernet
Mon Jul 03, 2006 5:16 pm
Forum: RouterBOARD hardware
Topic: Hyperlan2
Replies: 5
Views: 2171

Re: Hyperlan2

http://www.mikrotik.com/docs/ros/2.9/guide/driverlist

Thank's , but do you know what is hyperlan2 ?


bye
Yes.....
by cibernet
Mon Jul 03, 2006 4:55 pm
Forum: General
Topic: virus scanner
Replies: 17
Views: 3864

سايلنت ........ انت وين بالعراق ؟؟؟ اني بالعراق - بغداد ... samsoft08 at yahoo.com
:roll:
by cibernet
Sat Jul 01, 2006 2:55 pm
Forum: RouterBOARD hardware
Topic: Hyperlan2
Replies: 5
Views: 2171

Re: Hyperlan2

Hi guys,

There is no support for hyperlan2 in routerOS ?

Thank's
http://www.mikrotik.com/docs/ros/2.9/guide/driverlist
by cibernet
Fri Jun 30, 2006 9:50 pm
Forum: General
Topic: linux underneath
Replies: 4
Views: 782

You can add packages but only .npk (of mikrotik)
Maxi
well is there an external site other than mikrotik that offers these packages?
No
by cibernet
Fri Jun 30, 2006 9:38 pm
Forum: General
Topic: limit all traffic but email?
Replies: 3
Views: 989

Re: limit all traffic but email?

I have 2 Ethernet port “bridged” MT acting as a Bandwidth Control Unit, limiting traffic by IP address via simple queues. My email server is on another network. I have the email server's IP address and I'm using the standard ports; 110 and 25. How can I continue to control all NON-email traffic but...
by cibernet
Fri Jun 30, 2006 9:23 pm
Forum: General
Topic: linux underneath
Replies: 4
Views: 782

Re: linux underneath

So.. its time for the million dollar question. we all know RouterOS is running on top of the linux kernel. I've seen many Router Software packages such as Smoothwall, IPCop, Clarkconnect and others and they all run on Linux. Those above allow you to telnet into the router box and add linux programs...
by cibernet
Thu Jun 29, 2006 12:17 am
Forum: General
Topic: 2.9.26 Bug o what?
Replies: 0
Views: 523

2.9.26 Bug o what?

RouterOS 2.9.26, it hang up and cannot pass traffic exept MSN, VOIP, heres the error screen: "KERNEL: assertion (CL) -> magic= HTB_CMAGIC failed at sch_htb.c (????)" I thing its related to QUEUES... Has any see that error before? I will do a netisntall to see if the problem dissapears.. (it`s a remo...
by cibernet
Wed Jun 28, 2006 3:55 pm
Forum: The User Manager
Topic: 802.1x support
Replies: 5
Views: 3474

How about adding support to the wireless access lists? what do you want us to add? You already can add a user with the MAC address as username and use the User Manager to authenticate your wireless AP clients to the User Manager database. The atributes: Interface Ap TX limit Client TX limit Authent...
by cibernet
Wed Jun 28, 2006 3:07 pm
Forum: The User Manager
Topic: 802.1x support
Replies: 5
Views: 3474

no, we don't have such functionality yet. Maybe in future we will think about adding such features.
How about adding support to the wireless access lists?

Best regards
by cibernet
Wed Jun 28, 2006 8:35 am
Forum: The User Manager
Topic: Secondary HDD for log's
Replies: 7
Views: 3092

Secondary HDD for log's

It would be nice if we can set that all the data from the log (sessions) to be stored on another disk (HDD) because, we use DOM with MT.

Best regards
by cibernet
Mon Jun 26, 2006 9:42 am
Forum: General
Topic: P2P - ARES
Replies: 18
Views: 4701

you can limit p2p that way - set bandiwth for http, ftp and other well known protocols and for the rest of traffic set harsh limits ;) so - any unknown protocol will be limited - ares, encrypted bittorent etc.
Yes, that would be a good workaround, but, not a solution...
by cibernet
Mon Jun 26, 2006 9:40 am
Forum: General
Topic: NTP Client on RB112?
Replies: 3
Views: 685

Stupid me! :)

Yes, the package was disabled ...
Thanx, cibernet :)
;)
by cibernet
Mon Jun 26, 2006 6:56 am
Forum: General
Topic: P2P - ARES
Replies: 18
Views: 4701

Re: P2P - ARES

I´ve been searching in the forum and only found old theads about ARES P2P blocking. I´m testing MT ... i´m new in this. I´m doing some basic P2P limiting and blocking.... everything works fine with emule,,,, but i can't block or limit ARES... I´m testing MT 2.9.26 demo version any help? ps.sorry fo...
by cibernet
Mon Jun 26, 2006 5:18 am
Forum: General
Topic: NTP Client on RB112?
Replies: 3
Views: 685

Re: NTP Client on RB112?

Am I totally blind or what? :) I simply cant found NTP client on RB112. This is a real pain, as I use graphing and the graphs shows bad dates. RB forgots the manually entered date/time after reboot ... logs shows bad dates ... I would like to fix this if anyhow possible! Please, help! Check if the ...
by cibernet
Mon Jun 26, 2006 12:24 am
Forum: The User Manager
Topic: Could not determine local IP address
Replies: 2
Views: 12672

Re: Could not determine local IP address

I have setup user manager and after working thorugh the forum entries I have managed to get the user authenticating, but immediately afterwards the user disconnects with an error. In the Mikrotik logs I get an error stating"could not detect local IP address" eg: 16:25:30 pppoe,ppp,info <pppoe-0>: w...
by cibernet
Sun Jun 18, 2006 12:47 am
Forum: The User Manager
Topic: Inaccurate time accounting?
Replies: 2
Views: 2246

Re: Inaccurate time accounting?

I configured a user with a prepaid time of 2 hours. Used that to authenticate a SSH login to the RouterOS machine. After finishing a short session (duration 48s, displayed correctly) I'm displayed a remaining time of "1h:58m:57s" ??? Best regards, Christian Meis I see the same problem :( hope MT fi...
by cibernet
Thu Jun 15, 2006 5:02 pm
Forum: The User Manager
Topic: Time packs
Replies: 3
Views: 2562

so you want some kind of scheduled tasks or scripting that will be executing such operations?
Yes, scheduled tasks would be great. :)

Regards
by cibernet
Wed Jun 14, 2006 12:49 am
Forum: Wireless Networking
Topic: problem linking 2 rb 112 whit atheros Atheros 5213
Replies: 24
Views: 2822

well, I'm here again still don't running. How must I post the configs? Have I to execute export and put the output here?
yes
by cibernet
Wed Jun 14, 2006 12:08 am
Forum: The User Manager
Topic: Time packs
Replies: 3
Views: 2562

Time packs

Any chance to add, a time package (ex. 10 hours) that will automatic given over a period of time (ex. a month) so we can forget to renew the credits in the next period. and the option to extend it (the client used all the credit but we want to purchase only an extension of the current period) Best r...
by cibernet
Mon Jun 12, 2006 11:28 pm
Forum: The User Manager
Topic: [AP Bridge] not pinging
Replies: 1
Views: 1960

Re: [AP Bridge] not pinging

I have configured 2 RB532 in this mode: mode=ap-bridge band=5Ghz frequency=5180 SSID=abnet Wds-mode=dynamic Wds-default-bridge=bridge1 The ether1 of first AP have IP 10.0.0.1/24 The ether1 of second AP have IP 10.0.0.2/24 why I not ping from first AP to the second AP and viceversa ? Stephen Wrong f...
by cibernet
Sat Jun 10, 2006 7:07 pm
Forum: General
Topic: Time Format
Replies: 14
Views: 3693

name="zaher" target-addresses=192.168.0.4/32 dst-address=0.0.0.0/0 interface=all parent=none direction=both priority=8 queue=default-small/default-small limit-at=0/0 max-limit=24000/80000 total-queue=default-small time=17h-1h30m,sun,mon,tue,wed,thu,fri,sat This is a sample conf of my simple Q. My q...
by cibernet
Sat Jun 10, 2006 4:33 pm
Forum: General
Topic: Time Format
Replies: 14
Views: 3693

[xxxx@DeltaNet] system ntp server> print enabled: no broadcast: no multicast: no manycast: no [xxxx@DeltaNet] system ntp client> print enabled: no mode: unicast primary-ntp: 0.0.0.0 secondary-ntp: 0.0.0.0 status: stopped these are the conf of my NTP but again i think this has nothing to do with NTP...
by cibernet
Sat Jun 10, 2006 7:36 am
Forum: Wireless Networking
Topic: Wireless bridge and AP
Replies: 1
Views: 851

Re: Wireless bridge and AP

Hi there! This is my first entry in this forum, so i would like to say Hi to everyone and a big thanks to all the people who contribute here. I recently bought two routerboards with 2 atheros minipci to both boards. I need to make the following configuration: On routerboard1 the internet access is ...
by cibernet
Sat Jun 10, 2006 7:31 am
Forum: General
Topic: Time Format
Replies: 14
Views: 3693

Re: Time Format

Why when i put time limit at my simple Qs the rules dont work? For example: start time=17:30:00(5 and 30 afternoon)/End time=00:00:00 (midnight) Is my understanding of this format correct or not?and if it is correct why the rules dont work when i put that time in its place? Thanks in advance. zaher...
by cibernet
Fri Jun 09, 2006 12:56 am
Forum: Wireless Networking
Topic: Point to Point
Replies: 2
Views: 827

Re: Point to Point

Hi,

Can someone please point me to a docunment for connecting 2 5ghz radio's together. I would like to setup a point to point connection. One end will connect to an ehternet connection and the other a AP-Bridge.

Thanks in advance Mark
Seach the forums... has been asked so many times before.....
by cibernet
Fri Jun 09, 2006 12:52 am
Forum: Wireless Networking
Topic: Configuring RB112 for AP Bridge and what about the client??
Replies: 7
Views: 1568

Re: Oops.

I guess I jumped the gun a little... I'm still having problem configuring the station. When I create an AP with the RB112 and an SR2, I can connect to it from several different wireless devices in my office, doesn't matter what brand. Even when I put the other SR2 card into my laptop, I can connect...
by cibernet
Fri Jun 09, 2006 12:40 am
Forum: The User Manager
Topic: point to point connection
Replies: 1
Views: 2102

Re: point to point connection

Hi, Can someone please point me to a docunment for connecting 2 5ghz radio's together. I would like to setup a point to point connection. One end will connect to an ehternet connection and the other a AP-Bridge. Thanks in advance Mark This is the user manager forum... post in the wireless forum....
by cibernet
Thu Jun 08, 2006 7:39 am
Forum: Wireless Networking
Topic: what is the max clients 532
Replies: 1
Views: 698

Re: what is the max clients 532

i have a ap what is the maximum clients i can connect it has a sr2 and a cm9
i have heard 50 per radio but would like some real world input
Deppens on too many factors... search the forums you will find some posts talking about it, 50 it`s a good number...


Regards
by cibernet
Wed Jun 07, 2006 9:22 pm
Forum: Wireless Networking
Topic: problem linking 2 rb 112 whit atheros Atheros 5213
Replies: 24
Views: 2822

I had tyied whit the config in http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks and it dosn't work. I suppose that the page have some bugs, because I don't obtain the results showing there, in addition when I add the bridge port using winbox, the connection via ethernet was lost, and...
by cibernet
Tue Jun 06, 2006 7:37 am
Forum: Wireless Networking
Topic: atheros AR5212 PCI problem
Replies: 3
Views: 1129

Re: atheros AR5212 PCI problem

Hi all I use MT OS version 2.9.6 installed on PC Engines GmbH and Atheros AR5212 PCI card. I have a strange problem. Sometimes AR5212 PCI card is regconized and sometimes not regconized. If i unplug the power or shutdown MT OS then put the power on, the card is not regconized. But if i click System...
by cibernet
Tue Jun 06, 2006 6:42 am
Forum: General
Topic: Load Balancd Policy
Replies: 1
Views: 597

Re: Load Balancd Policy

Dear All... Any one have an idea to implement Load balance on this configuration I have two VSAT ISPs first with 4Mbps and second with 2Mbps I need a configuration lets me configure the router to do load balance also to direct the service automatically to one of the ISPs if the other fails... If u ...
by cibernet
Tue Jun 06, 2006 6:34 am
Forum: General
Topic: configuration page in other location ?
Replies: 1
Views: 511

Re: configuration page in other location ?

How to ?
I have a network, with one public IP address, behind microtic is addresses pool 192.168.0.x and AP (not MT) in 192.168.0.254
And my quastion is, how to configure main server (on MT), to can see this AP in 192.168.0.254 in other locations (some in the world) ?
VPN?
by cibernet
Tue Jun 06, 2006 6:30 am
Forum: The Dude
Topic: dude platforms supported?
Replies: 1
Views: 1211

Re: dude platforms supported?

Hi there...Does it only run on Windoze? Is it possible to get a compile for OS/2 (eComStation)? (If not by you is the source avail?)

Thanks,

Leon Zetekoff
BackWoods Wireless
Blandon, PA :P
It can run on linux too (wine)

Regards
by cibernet
Tue Jun 06, 2006 6:28 am
Forum: General
Topic: RSTP documentation
Replies: 2
Views: 723

Re: RSTP documentation

Is there any?
It's not in the manual (yet)


Regards...
by cibernet
Tue Jun 06, 2006 6:22 am
Forum: Wireless Networking
Topic: problem linking 2 rb 112 whit atheros Atheros 5213
Replies: 24
Views: 2822

well, sorry, I want to say out of this site. I have found the manual of mikrotik, but is very large to study and I need a solution quikly. I'll do now the config that you send me in the previous post, but if you now how to do that the devices works one in ap mode and the other in station mode I lik...
by cibernet
Tue Jun 06, 2006 6:10 am
Forum: Wireless Networking
Topic: problem linking 2 rb 112 whit atheros Atheros 5213
Replies: 24
Views: 2822

Re: re

and I haven't found nothing out this forum
Well, you should read it.... here's the link http://www.mikrotik.com/docs/ros/2.9/
by cibernet
Tue Jun 06, 2006 5:54 am
Forum: Wireless Networking
Topic: problem linking 2 rb 112 whit atheros Atheros 5213
Replies: 24
Views: 2822

Re: problem linking 2 rb 112 whit atheros Atheros 5213

I all!!!! I need some help to find the solution to link 2 rb 112 whit atheros Atheros 5213. I'm new with mikrotick and only need a basic poit to point connection, I was tried with every interfaces (web, console and winbox) but I can't find the correct setup. I can ping whit mac's but not whit ip. I...
by cibernet
Fri Jun 02, 2006 6:02 am
Forum: The User Manager
Topic: time scheduling for clients via ip address
Replies: 1
Views: 1923

Re: time scheduling for clients via ip address

Guys, I have a feature i want to add to my wireless network.Can anyone help me on how i can configure my MT server to allow clients at specific times to access the internet through the MT server. I have MT server that connects to clients on 192.168.2.0 network thru wireless, I want configure the cl...
by cibernet
Thu Jun 01, 2006 1:19 pm
Forum: Wireless Networking
Topic: WDS backbone
Replies: 9
Views: 2178

Re: WDS backbone

Hi all! I'm new mikrotik user! I have one cable connection (ethernet) and I would want to carry several the Internet cover on points being used one wireless backbone, in which every node it is access point and repeter at the same time. I must use WDS, right? The situation is like this: http://malac...
by cibernet
Thu Jun 01, 2006 1:07 pm
Forum: General
Topic: totally transparent proxy
Replies: 3
Views: 1719

Re: totally transparent proxy

I have a network (10.53.0.0/24). The users uses proxy (10.53.0.1:3128). The proxy has an adsl link and a leased line. When an visitor comes, he cannot use web, because he don't know our proxy address or he has other proxy settings (for example 10.53.2.1:3128 or 10.52.100.254:3128 etc) All visitors ...
by cibernet
Thu Jun 01, 2006 1:03 pm
Forum: General
Topic: different speeds.
Replies: 5
Views: 1290

its in the documentation... read it sometime :)

56000 - bytes
56k - kilobytes
56m - 56mbytes
etc etc etc
i would when i have time. also, what section if you can point me in the right direction.

can i actually type it as it is above? 56m or 56k ?
http://www.mikrotik.com/docs/ros/2.9/
by cibernet
Thu Jun 01, 2006 6:33 am
Forum: RouterBOARD hardware
Topic: Overclocking the rb532...opinions?
Replies: 23
Views: 10376

What is the official procedure to switch the default frequency to 330/333? Mine always reverts back to 264/266. Thanks, Dave From de routerboard manual: Changing CPU Frequency By default, the RouterBOARD 500 series boards are equipped with 266MHz processors, which may be overclocked to 333MHz with ...
by cibernet
Wed May 31, 2006 5:10 am
Forum: Wireless Networking
Topic: Doubts about Mikrotik support device list
Replies: 4
Views: 877

Re: Doubts about Mikrotik support device list

Hi all,

Does any one know if mikrotik 2.9.7 supports dwl520 v.E1 or TEW-228PI (Chipset RTL8180L) ? if yes, does it work as AP or only clients ?

Thanks,
Anderson
HERE: http://www.mikrotik.com/docs/ros/2.9/guide/driverlist
by cibernet
Tue May 30, 2006 5:59 pm
Forum: RouterBOARD hardware
Topic: Overclocking the rb532...opinions?
Replies: 23
Views: 10376

Re: Overclocking the rb532...opinions?

I'm curious to hear from anyone who is running overclocked rb532 boards (in particular at 333MHz) and if they've had in stability issues with them? I haven't really seen any complaints at all with doing this, but have not run any production boards at this speed yet. Anyone care to post their experi...
by cibernet
Tue May 30, 2006 5:57 pm
Forum: The User Manager
Topic: Userman limitation
Replies: 8
Views: 4031

Userman limitation

Is there any limitation (active sessions) that the userman can handle now (beta) ? or follows what is here http://www.mikrotik.com/software.php

Regards
by cibernet
Sun May 28, 2006 6:54 pm
Forum: General
Topic: change routeros SSH and WINBOX listen port
Replies: 3
Views: 1690

Re: change routeros SSH and WINBOX listen port

Hy all! I'm relatively new to routeros! It's a great stuff! But I could not find a way changing it's FTP server, SSH server or WINBOX listening port. I'm receiving huge amount of SSH try attacks (most of them caused by scripts and viruses from internet) on the default 22 port, and I'd prefer moving...
by cibernet
Sun May 28, 2006 6:48 pm
Forum: General
Topic: public queue
Replies: 1
Views: 615

Re: public queue

hello all, i have mikrotik server that has 2 NIC one is public and the other is the local one, i need to limit traffic for the public interface, or limiting the download that is used by the mikrotik for the local users from the public interface, thanks Read: http://www.mikrotik.com/docs/ros/2.9/roo...
by cibernet
Wed May 24, 2006 5:13 am
Forum: RouterBOARD hardware
Topic: NeighborViewer block
Replies: 2
Views: 1872

Re: NeighborViewer block

hi,

i've some problem, i just want my mikrotik not detected in NeighborViewer, can u help me to make firewall to this??


thx
Disable de MAC server..
by cibernet
Wed May 24, 2006 5:10 am
Forum: General
Topic: mactelnet blok
Replies: 2
Views: 876

Re: mactelnet blok

can ur help,


how to blol mactelnet and macping in mikrotik

thx
:roll: :?:
by cibernet
Wed May 24, 2006 4:48 am
Forum: General
Topic: How to disallow p2p packets in mt router?
Replies: 4
Views: 1400

Re: How to disallow p2p packets in mt router?

/ip firewall filter add chain=forward p2p=all-p2p action=drop
Regards...
Thanks a lot, it works :)
:wink:
by cibernet
Wed May 24, 2006 1:17 am
Forum: General
Topic: Bandwidth limiting...need some good examples
Replies: 9
Views: 3320

I need some help before now my network was very bad untill us use the config below it work but there are some site that don't just work and are not able to sign in to http://www.mail.yahoo.com hotmail .com gmail.com and yahoo messenger when i increase the pcq rate thelink will be slow and can't eve...
by cibernet
Wed May 24, 2006 1:14 am
Forum: General
Topic: connection bandwidth limiting
Replies: 8
Views: 2577

I need some help before now my network was very bad untill us use the config below it work but there are some site that don't just work and are not able to sign in to http://www.mail.yahoo.com hotmail .com gmail.com and yahoo messenger when i increase the pcq rate thelink will be slow and can't eve...
by cibernet
Mon May 22, 2006 4:11 pm
Forum: Wireless Networking
Topic: Connection refused
Replies: 11
Views: 9142

Re: Connection refused

.. what version of the Winbox loader are you using? The Winbox loader is V2.2.8 freshly provided by the RouterOS itself. I've also tried clearing out the C:\Documents and Settings\username\Application Data\Mikrotik\Winbox folder first a few times but it makes no difference. I can provide an SSH log...
by cibernet
Mon May 22, 2006 3:38 pm
Forum: Wireless Networking
Topic: Connection refused
Replies: 11
Views: 9142

Re: Connection refused

Check if there is some firewall rule that is blocking port TCP 8291.. Thanks Cibernet but the only firewall entry of any kind that I can see is : chain=srcnat out-interface=ether1 action=masquerade which is there so that I can share the Public IP on the wireless interfaces. Ummm... that`s strange.....
by cibernet
Mon May 22, 2006 3:23 pm
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2438

but wihtout bursting!!! you can set rate limit on the profile you are creating. so how to appply bursting? You should read the manual and try to do it before... rate-limit (text; default: "") - Rate limitation in form of rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-rate] [rx-burst-threshold[/tx-burst...
by cibernet
Mon May 22, 2006 1:49 pm
Forum: Wireless Networking
Topic: Connection refused
Replies: 11
Views: 9142

Re: Connection refused

I've seen this question asked before but have seen no solutions. I have a 2.9.24 RouterOS unit whose ethernet IP I can access no problem via SSH, WWW, FTP etc. but I can't connect using Winbox on the same IP. I can connect using Winbox on it's Wireless interfaces okay but not on its ethernet interf...
by cibernet
Mon May 22, 2006 10:53 am
Forum: General
Topic: users, and access to services
Replies: 4
Views: 1071

next quastion, of this topic, how to make a folders, or some like this to user ?

ex.

user : folder:

Gabrysia --> Gabrysia


Adn this user have only access to her folder ?!
You can´t do that... RouterOS it´s a router... not a file server..

Regards...
by cibernet
Mon May 22, 2006 10:42 am
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2438

I suggest using PCQ to apply the limitation on your /24 network. because creating a simple queue for each user one by one is really annoying.
you can use the rate-limit to create a dynamic simple queue too...
by cibernet
Mon May 22, 2006 10:38 am
Forum: General
Topic: instalation help need !
Replies: 10
Views: 1942

Install it (MT) from floppy, it's very easly then some iso's ang cd's... Open a flopy maker and write a floppy discs .... then make this very simples command forward .. P.S. really with floppy i have't problems . It´s a lot easy with the bootable .iso.... but you have to know how to burn a CD :lol:...
by cibernet
Mon May 22, 2006 5:43 am
Forum: General
Topic: validity option in hotspot
Replies: 1
Views: 820

Re: validity option in hotspot

any body help me how to configer time limite in hotspot.every think is ok on hotspot but i have some problem 1. i am fix one user 50 hours but i want set that user use it in 30 day. and after 30 days he is not use it. in hotspot i didn't fide any option if any body know about it plz help me 2. if i...
by cibernet
Mon May 22, 2006 2:33 am
Forum: Wireless Networking
Topic: RB wlan ap-bridge
Replies: 3
Views: 1033

Re: RB wlan ap-bridge

I am trying to get my rb work as an ap for my winxp labtob. I setup the wlan1, can see it on the labtob, can connect. I get an ip, the dns and the gateway. But can not ping anything. I the the ip route stats, i can set the routes but it is not active. Any help ?? Regard Brian Please read the manual...
by cibernet
Mon May 22, 2006 2:28 am
Forum: General
Topic: Rate Limit p2p and udp
Replies: 3
Views: 1942

Re: Rate Limit p2p and udp

Hello When I rate limit my udp even to 10000 per sec, my dns server & msn stopps working Also, when rate limit p2p whatever I chose P2p will no longer connect Does anyone have a sampel what they use to limit p2p and udp? I don't want to limit speed, I do that with queue and priority I'm just intres...
by cibernet
Mon May 22, 2006 2:26 am
Forum: General
Topic: Having trouble with P2P marking
Replies: 6
Views: 2418

Ok well i think i got it sorted as far as mangle goes What i'm wanting to do is set it up so that p2p whores can run 24/7 but if the traffic is needed else where it goes there say we have a 2mbit CIR pipe, P2P is using 2mbit and a user goes to a speed test site, i wasn the speed test to show 2mbit,...
by cibernet
Mon May 22, 2006 2:22 am
Forum: General
Topic: How to disallow p2p packets in mt router?
Replies: 4
Views: 1400

Re: How to disallow p2p packets in mt router?

I want to disallow my users to use such applications as DC++, bittorretn etc. Can this be done by mt router?

Thanks.
/ip firewall filter add chain=forward p2p=all-p2p action=drop
Regards...
by cibernet
Mon May 22, 2006 2:18 am
Forum: General
Topic: instalation help need !
Replies: 10
Views: 1942

Re: instalation help need !

When boot MT cd(2.9.17 burned from .iso) I got kernel and comand promth. What to do next ?? In earlier version 2.8.26 It bring me setup where I just select MT components and installation is finished. I think this is simple for anyone :) Please.. read : http://www.mikrotik.com/docs/ros/2.9/guide/bas...
by cibernet
Mon May 22, 2006 2:15 am
Forum: General
Topic: mtu
Replies: 2
Views: 1020

Re: mtu

hello
am have same of site open pl tell me where to going, if want set to mtu in mikrotik router,because some is open througt nat connect.
:roll:
by cibernet
Sun May 21, 2006 1:23 am
Forum: RouterBOARD hardware
Topic: rstp-test ??
Replies: 3
Views: 1830

Re: rstp-test ??

after upgrade my RB532a for OS 2.9.24 dont locate package rstp-test i need this package, i dont locate for download in http://www.mikoritk.com.

Help-me !!
if you use the routeros package you have to enable it from system>packages or download the all-packages and install the rstp-bridge test...
by cibernet
Sun May 21, 2006 1:19 am
Forum: Wireless Networking
Topic: Speed is slow on my p4 PC to rb532
Replies: 8
Views: 1316

Re: Speed is slow on my p4 PC to rb532

I am setting up a large high school with PtP connections to all the builbings and I just started testing the 2.6Ghz P4 main AP which has 2 SR2 cards now but I am going to replace them with 4 CM9 cards. The client ends are rb532s with CM9 cards. The thing that is making my crazy is that all I can ge...
by cibernet
Sun May 21, 2006 1:16 am
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2438

Re: pppoe

i have address list from 10.11.1.1-10.11.1.254 this is chosen by a pppoe profile i disabled bandwith rate on the profile kept it empty and i created a simple queue with destination address 10.11.1.0/24 and putted the burst speeds i think my error is that is should be target address instead of desti...
by cibernet
Sat May 20, 2006 10:52 pm
Forum: RouterBOARD hardware
Topic: RB532 WDS and SR2 and SR5 cards
Replies: 3
Views: 1540

Re: RB532 WDS and SR2 and SR5 cards

I've found that when trying to do dynamic WDS with SR2's and SR5's and then putting them under a bridge running RSTP it will show the card as being a disabled port. Everything works with CM9 just fine. I've tried 2 different pwr. supplies that are rated at 3amps. I only run with 1 card(thats all I ...
by cibernet
Sat May 20, 2006 8:46 am
Forum: Wireless Networking
Topic: How to set AD-HOC mode to PCI wireless card?
Replies: 7
Views: 1183

ap-bridge is not possible on Level 4...
Wrong.... check here...: http://www.mikrotik.com/software.php
by cibernet
Sat May 20, 2006 8:18 am
Forum: Wireless Networking
Topic: How to set AD-HOC mode to PCI wireless card?
Replies: 7
Views: 1183

How to set up that PCI wireless network card as AP?
http://www.mikrotik.com/docs/ros/2.9/interface/wireless
by cibernet
Sat May 20, 2006 7:47 am
Forum: RouterBOARD hardware
Topic: WIreless radiocards loosing wireless on routerboard
Replies: 17
Views: 4054

We have a RB532 (MT 2.9.18 ) with the daughtboard and on it we put two 400mW 2,4GHz cards and a CM9 card (3 cards altogether).
Too much.... you can put MAX 2 SR cards on ONE RB... (and without the doughterboard...) or you could blow up the regulator on the RB...


Regards....
by cibernet
Sat May 20, 2006 5:48 am
Forum: Wireless Networking
Topic: Backup and Restore
Replies: 5
Views: 1028

Re: Backup and Restore

Is there any other way to replicate configurations on multiple MT Wireless APs without changing MAC addresses?
Use the "export" commnad....

Regards
by cibernet
Sat May 20, 2006 3:47 am
Forum: General
Topic: History, of ping's
Replies: 1
Views: 553

Re: History, of ping's

I wan't to have a some history of ping's , to some hosts.

Where can I make it ?
I use winbox, and 2.9.23 MT

Lucas
Use the log command in firewall to log ICMP traffic..

Regards
by cibernet
Sat May 20, 2006 3:38 am
Forum: RouterBOARD hardware
Topic: frequent disconnections
Replies: 3
Views: 1414

please i dont think i understand. do you mean the queues are causing it. it happens to systems with out queues also
I think he means that the wireless card is overloaded... too much wireless clients..

Regards
by cibernet
Sat May 20, 2006 3:33 am
Forum: Wireless Networking
Topic: Backup and Restore
Replies: 5
Views: 1028

Re: Backup and Restore

I am trying to copy configuration from one MT Wireless AP to another. I used backup and saved the file on a PC. Then I copied the file to another MT Wireless AP and did a restore. My problem is this restored the router configuration, however the wireless settings were not restored except the SSID. ...
by cibernet
Sat May 20, 2006 3:29 am
Forum: General
Topic: Limit ARES with 2.9.24 ???
Replies: 1
Views: 716

Re: Limit ARES with 2.9.24 ???

Time ago I saw that I cannot limit ARES, and other p2p, Bandwith...

So I ´m using a DROP rule for WAREZ P2P...

With the new OS can I limit ARES bandwidth ?

Regards.
No, you can only drop it

Regards
by cibernet
Sat May 20, 2006 3:27 am
Forum: General
Topic: Can you set MAC address of Mikrotik on Bridge interface?
Replies: 4
Views: 8451

Re: Can you set MAC address of Mikrotik on Bridge interface?

Hello, I am building a bridged network using the new rstp-test package where a main Mikrotik will provide DHCP and PPPoE services to the rest of the network. On the other Mikrotik bridges, I am using a combination of filters and destination-nat based on the main Mikrotik's MAC address to contain br...
by cibernet
Fri May 19, 2006 10:49 am
Forum: General
Topic: Problem with DHCP under MT
Replies: 5
Views: 1400

ok, it's right..., thanks... but, I have another qastion ! I configue a subnet mask (..../16), like 255.255.0.0 and a MT (in DHCP) give to DHCP client sub 255.0.0.0 , why ? Can I make a something, to protect a network, that My client's can't change a IP addresses ? for example, in My network, some ...
by cibernet
Fri May 19, 2006 6:11 am
Forum: General
Topic: Traceroute
Replies: 2
Views: 644

Re: Traceroute

Maybe I am just stupid - I don't know. When I run a traceroute I am used to seeing both the IP and the DNS name. In Mikrotik it appears to be a one or the other scenario. Is there a way to see both?
no... :roll: (i think)..
by cibernet
Fri May 19, 2006 2:56 am
Forum: General
Topic: Burst, make's nothing
Replies: 3
Views: 836

Re: Burst, make's nothing

I configure speed like this : (simple queue ->general) up down Max limit : 64 128 Burst: burst limit 64 128 burst threshold 64 512 burst time 7s 7s and thet's make nothing, I don't feel this 512 speed in first 7s connection... What's not right ??? Lucas Read the manual, you will find an example how...
by cibernet
Sat Apr 15, 2006 7:48 pm
Forum: General
Topic: ip web proxy
Replies: 4
Views: 1060

Note:i will never use queues at all coz they dont work well.
and i will never use p2p filters coz it never stops p2p downloaders.
Come on dude, READ THE MANUAL, after posting such of LIE.... i think you need more knowledge....


Regards
by cibernet
Sat Apr 15, 2006 4:10 am
Forum: RouterBOARD hardware
Topic: New user needs help!!
Replies: 4
Views: 12700

Re: New user needs help!!

I am new to the Mikrotik router. My experience is with Cisco equipment. Is there a command like show run that will show me the entire router configuration?
Manual http://www.mikrotik.com/docs/ros/2.9/
by cibernet
Fri Apr 14, 2006 10:11 am
Forum: General
Topic: MT incorrectly reporting memory?
Replies: 4
Views: 916

Re: MT incorrectly reporting memory?

I am setting up a new router to replace my old one (better cpu, more memory, etc). I have an IBM desktop board with Intel 1.8ghz processor and 3 x 512mb PC133 SDRam installed. I am using a 64mb DoM with 2.9.20 installed. In MT, it incorrectly states that the memory is < 1gb even though the IBM Bios...
by cibernet
Wed Apr 05, 2006 12:23 pm
Forum: General
Topic: RouterOS 2.9.19 Released
Replies: 9
Views: 1787

RouterOS 2.9.19 Released

What's new in 2.9.19: *) fixed BGP memory leak in routing package; *) implemented write-sect-total for RB500; *) added feature to access hotspot servlet pages by suffix ".cgi"; *) fixed bug in sniffer; *) changed simple queues to work better together with pppoe; *) added WinBox support in webproxy-t...
by cibernet
Tue Apr 04, 2006 11:00 pm
Forum: General
Topic: RSTP-TEst Package for ROuterboard 500 ?
Replies: 5
Views: 3871

Re: RSTP-TEst Package for ROuterboard 500 ?

Is there any available ?
yes....
by cibernet
Sun Apr 02, 2006 11:05 pm
Forum: Wireless Networking
Topic: What’s the problem with the sr2
Replies: 8
Views: 1727

It’s not a noisy because it’s a quiet little town, where we are the only service providers. So, the SR2 haven’t been a perfect solution in your experience? Then why are those so preferred? Is this the case only with SR2s or all the Atheros cards give messed up pings like this one? When my Prism car...
by cibernet
Sun Apr 02, 2006 8:19 pm
Forum: Wireless Networking
Topic: How many access point support an apbride mode in omni
Replies: 1
Views: 897

Re: How many access point support an apbride mode in omni

dear if i connect mikrotic apbridge in omni/sector antenna , how many acess point it support in remote end
Deppends on distance, bandwidth, antennas, radios, ect ect... about 50 clients you can get aprox..

Regards
by cibernet
Sun Apr 02, 2006 8:10 pm
Forum: Scripting
Topic: limit my customers to data rate or Time
Replies: 2
Views: 1311

Re: limit my customers to data rate or Time

Hello All, I am using MT 2.9.8 and I am not using HotSpot here.I m just enabling IP Addresses in firewall and Queuing in simple queue.My question is can limit my customers to data rate or Time and let them know by email when they finish 80% of their Quota.Plz suggest me a Answer. thanks Srikanth Yo...
by cibernet
Mon Mar 27, 2006 3:08 am
Forum: Wireless Networking
Topic: poll: u.fl vs. mmcx for sr2, sr5 and soldering
Replies: 28
Views: 7965

On UFL you will have about 5dB better signal than on MMCX
:roll:
by cibernet
Sat Mar 25, 2006 1:55 pm
Forum: RouterBOARD hardware
Topic: I have a problem witch rb 112 in station mode
Replies: 3
Views: 1791

Muchas gracias, Jose ignacio por tu rapida contestacion, verás tengo un par de equipos con routeros haciendo un enlace, el cual funciona sin problema, ademas tambien he configurado otro en modo punto acceso trasparente sin problemas, pero esta semana he adquirido dos rb 112 para ponerlas en modo cl...
by cibernet
Sat Mar 25, 2006 6:46 am
Forum: RouterBOARD hardware
Topic: I have a problem witch rb 112 in station mode
Replies: 3
Views: 1791

Re: I have a problem witch rb 112 in station mode

Hello, i have two rb112 but no work in station mode, i am stupid and need manual step by step to configure witch winbox. Help me, please Thanks. :( Post more information about your config, so we can help you... also, try to search and read: forum, wiki and the manual. Regards... -- José Ignacio Aco...
by cibernet
Sat Mar 18, 2006 6:54 pm
Forum: General
Topic: 2.8 to 2.9
Replies: 4
Views: 857

Re: 2.8 to 2.9

mine mikrotik this in version 2.8.10 I can low Packages 2.9.17 and install?
Yes you can upgrade to 2.9 just make sure that the upgrade licence it´s not expired


Regards
by cibernet
Wed Mar 15, 2006 2:30 am
Forum: General
Topic: Approximate 2.9.15 release date?
Replies: 1
Views: 1929

Re: Approximate 2.9.15 release date?

Greetings,

Wondering when an approximate relase date for 2.9.15 is? Still having problems on and off, would be nice to know a rough timeline and I expect that everyone else that is having problems would be very interested in also.
2.9.17 has been released.....
by cibernet
Thu Mar 09, 2006 10:17 pm
Forum: General
Topic: 2.9.16 Released
Replies: 14
Views: 6044

2.9.16 Released

What's new in 2.9.16: *) fixed ospf bugs that caused problems when multiple addresses were assigned to the same interface; *) added option for enabling TCP SYN cookies; What's new in 2.9.15: *) fixed mac address changing (improves vrrp) *) fixed dns cache, it could stop working *) added server-name ...
by cibernet
Thu Mar 09, 2006 8:28 pm
Forum: General
Topic: 2.10
Replies: 2
Views: 2081

Re: 2.10

How i can test and use Mikrotik 2.10 ???
You cant, there is no 2.10 betas right now...
by cibernet
Wed Mar 08, 2006 4:43 am
Forum: General
Topic: queue base on time
Replies: 3
Views: 850

Re: queue base on time

hello mr/mrs could anyone give an example to use queue base on time an example: ip: 192.168.11.2 from 08.00 am until 06.00 pm get bandwidth 32kbps until 64kbps......and from 06.00 pm until 08.00 am get bandwidth 64kbps until 128kbps eveyday i use mikrotik 2.9.2 thank you verymuch for sugestion seac...
by cibernet
Wed Mar 08, 2006 4:40 am
Forum: Wireless Networking
Topic: Limiting amount of registered wireless connection
Replies: 3
Views: 1047

Re: Limiting amount of registered wireless connection

Is there any way to limit the number of wireless connection per radio to say 50 to prevent a single access point from getting overloaded?


thank you
If you want to limit the max registered clients, just set the number on the wireless interface...
by cibernet
Mon Mar 06, 2006 8:41 pm
Forum: Wireless Networking
Topic: sr2 disaster???
Replies: 9
Views: 2135

Re: sr2 disaster???

Hi all, I upgraded an old smart bridges AP with an MT RB500 and sr2 card. The problem is that after doing this only about 5 of my 20 clients reconnected and even the ones that did were performing poorly. I tested the configuration with the same units I use for my clients and it seemes to be all OK ...
by cibernet
Mon Mar 06, 2006 8:37 pm
Forum: General
Topic: RB532 with 2.9.11 or 12 or 13 crashes with QUAKE3
Replies: 16
Views: 2903

Re: BUG FOUND!!

Traffic that will forcebly reboot an RB532A with 2.9.12. Only config in the RB532A: Two ethernet ports configured with IPs. One of the port to be used as a gateway to the internet . The second port to connect to a PC running Quake3 with all the lates paches. The reset of the config as default in th...
by cibernet
Mon Mar 06, 2006 5:12 pm
Forum: General
Topic: Mikrotik reboot varies times to the day
Replies: 17
Views: 2995

If you can completly turn off watchdog and see if it still reboots. One time we upgraded the ip address in watchdog got changed to 0.0.0.0 and that caused the router to reboot alot for us. Also if the ip your watching is your wireless link the link may be getting some interfearance which is causing...
by cibernet
Mon Mar 06, 2006 4:34 pm
Forum: Wireless Networking
Topic: sir i want configuration hotspot 500Mts fully wi-fi can it ?
Replies: 1
Views: 929

Re: sir i want configuration hotspot 500Mts fully wi-fi can

sir i want configuration hotspot 500 Mts including one hotel and garden
with one omni one mikrotik.Nothing else. can it provide signal in the 2 staire hotel no using accespoint.
:roll:
by cibernet
Mon Mar 06, 2006 4:31 pm
Forum: Wireless Networking
Topic: How to limit clients connections in 2.9.2 & 2.9.6
Replies: 3
Views: 1192

Re: How to limit clients connections in 2.9.2 & 2.9.6

Hi everyone, Can anybody help me how to limit the clients connections per Ip adress,I am using wireless prism 2.5,200mwa as AP , and when my clients make big number of connections , everything is going bad , AP lose efectivity. Please if anyone can help me about that .. Thanks..! First, try to upgr...
by cibernet
Mon Mar 06, 2006 4:19 pm
Forum: General
Topic: wireless-test in 2.9.13 rb500
Replies: 3
Views: 761

Naturally I did that first. I do not see that it says that wireless-test was removed.
Now its a regular package.. no more test
by cibernet
Mon Mar 06, 2006 3:00 pm
Forum: General
Topic: wireless-test in 2.9.13 rb500
Replies: 3
Views: 761

Re: wireless-test in 2.9.13 rb500

I see no wireless-test package in 2.9.13 for the rb500. Has it been removed? I have sr2s which I need to have the fix from 2.9.11 in wireless-test or I have to set manual tx rpower. Is the wireless package in 2.9.13 updated to include what was also in the test package? Please advise Look at the cha...
by cibernet
Sun Mar 05, 2006 8:37 pm
Forum: General
Topic: Mikrotik reboot varies times to the day
Replies: 17
Views: 2995

:( one of my routers reboot too, in the log i can only see: mar/04/2006 18:34:39 system,error,critical router was rebooted without proper shutdown mar/04/2006 18:37:33 system,error,critical router was rebooted without proper shutdown mar/04/2006 18:43:49 system,error,critical router was rebooted wit...
by cibernet
Wed Mar 01, 2006 5:11 am
Forum: General
Topic: the soft-key is change
Replies: 3
Views: 916

Re: the soft-key is change

after format my diesk (64M pqi DOM), my soft-key was changed my old key :m83d-icn (level 5) the new key :k3b9-zrn How to restore the key ? Another problem is Each disk format this, always changing key If you format the hd you will loose your key, and the soft-id will change too... You should read t...
by cibernet
Wed Mar 01, 2006 5:09 am
Forum: General
Topic: Feature Suggestion -> Ability to Change Proxy Error Pages
Replies: 1
Views: 1782

Re: Feature Suggestion -> Ability to Change Proxy Error P

Hi, I have brought this up before butthe ability to change proxy error pages for us is really important. To be able to change this to something more readable would be great! Thanks Joshua Already asked before... -- José Ignacio Acosta Cibernet Comunicaciones / Mikronet Joaquín V. González Salta - A...
by cibernet
Tue Feb 28, 2006 3:37 am
Forum: General
Topic: web-proxy and queue
Replies: 4
Views: 1169

I'll be very pleased if you could show me where is it. Because I can't find it. Here is one... http://forum.mikrotik.com//viewtopic.php?t=5878&highlight=unlimited+cashe -- José Ignacio Acosta Cibernet Comunicaciones / Mikronet Joaquín V. González Salta - Argentina http://www.mikronet.com.ar http://...
by cibernet
Mon Feb 27, 2006 6:19 pm
Forum: General
Topic: How to log established sessions only?
Replies: 1
Views: 503

Re: How to log established sessions only?

Can anyone tell me how to log established sessions only? For example user has connected to some host and router writes only one line to log : that this user has connected somewhere. Please help me... Use the option log under firewall Regards -- José Ignacio Acosta Cibernet Comunicaciones / Mikronet...
by cibernet
Mon Feb 27, 2006 6:16 pm
Forum: General
Topic: 2.9.12 software anyone?
Replies: 13
Views: 2018

Re: 2.9.12 software anyone?

I need a copy of the all_packages zip for 2.9.12 OS for the RB-230's If someone has an archive, would you please email to me or send a url if they know where it might live? 2.9.13-14 has caused a lot of trouble with our network and OSPF email: phil@aircanopy.net thanks! I have: routeros-x86-2.9.12....
by cibernet
Mon Feb 27, 2006 6:13 pm
Forum: General
Topic: Winbox port forwarding (2.9)
Replies: 2
Views: 1469

Re: Winbox port forwarding (2.9)

We deploy and access router at each of our sites (sputnik AP160s) which handles client login/captive portals etc. We are currnetly setting up our RB532s as transparent bridges so that the AP160s hand out DHCP addresses to clients connecting to the RB532 long range radioes. And it works great. Howev...
by cibernet
Mon Feb 27, 2006 6:11 pm
Forum: General
Topic: web-proxy and queue
Replies: 4
Views: 1169

Re: web-proxy and queue

Ello Is it posible to configure my MT 2.9.14 that a user using web-proxy downloads a file from internet and the file is cached on web-proxy it goes unlimited speed but if the file is not cached in the web-proxy then download speed is limited for example 512/128 kbps for that user. If it's posible c...
by cibernet
Sun Feb 26, 2006 5:28 am
Forum: Wireless Networking
Topic: faustrating issues on performance
Replies: 22
Views: 5053

YEAH I KNOW BUT I DONT GET VERY FAR WITHOUT THEM
Don´t use capital letters.... Try ubiquiti SR2 400mW...

Regards


--
José Ignacio Acosta
Cibernet Comunicaciones / Mikronet
Joaquín V. González
Salta - Argentina
http://www.mikronet.com.ar
http://www.cibernetcom.com.ar
by cibernet
Sun Feb 26, 2006 4:47 am
Forum: Wireless Networking
Topic: faustrating issues on performance
Replies: 22
Views: 5053

Re: faustrating issues on performance

i have an mt525 board and a 1 watt pcb amp. i have being using this kinda amp for a while but they kept on packing up after 3 weeks. the last 1 i was given "cos of my devotion" i guess has being on for a while now more than 3 weeks but the problem am having with that now is that the performance is ...
by cibernet
Sun Feb 26, 2006 4:40 am
Forum: General
Topic: Beware, clients can see your graphs !
Replies: 2
Views: 1516

Re: Beware, clients can see your graphs !

Beware of the little oversight that most people make. From version 2.9 or whichever had the graphing first, all your clients can view you graphs. And they can see how many clients you have on the network and how much bandwidth they are using. Go via web browser http://"the ip of your mikrotik:port ...
by cibernet
Sat Feb 25, 2006 6:24 am
Forum: General
Topic: bandwidth managment
Replies: 14
Views: 2969

Thanks for the reply but base on what i side i get from my ISP will that not be too much bandwidth per user 30kbps? Are you talking about 30 kilo bits or 30 kilo bytes??? Regards -- José Ignacio Acosta Cibernet Comunicaciones / Mikronet Joaquín V. González Salta - Argentina http://www.mikronet.com....
by cibernet
Sat Feb 25, 2006 5:03 am
Forum: General
Topic: bandwidth managment
Replies: 14
Views: 2969

Hello all thanks for the good work you all are doing with this forum, please i still need some help on bandwdith i 256/512 from my ISP and i have up to 80 users and some time more on my network i use simple queqe to do the bandwith sharing with 3/4kbps and some users 10/16kbps but they cant use it ...
by cibernet
Sat Feb 25, 2006 3:37 am
Forum: Wireless Networking
Topic: Questions about nstream
Replies: 1
Views: 1149

Re: Questions about nstream

Hi, after using MT in quite a legacy way (ap-bridge, with wds creating point-to-point links) i started to test nstream to see if i could get any improvement on the speed. I must say that i'm quite happy of the links but i never get more that 12/14 mbit per second usually. What seems quite strange t...
by cibernet
Sat Feb 25, 2006 3:32 am
Forum: Wireless Networking
Topic: New wireless scheduler - will MT implement it?
Replies: 1
Views: 1014

Re: New wireless scheduler - will MT implement it?

There is a new scheduler especially designed for using in wireless networks, which potentially would eliminate wireless link overusage by wireless customers by fairlu destributing badwidth and much more. The question is: is MT goint to integrate it to the MT core? One can follow the link for concep...
by cibernet
Sat Feb 25, 2006 3:31 am
Forum: General
Topic: Problem WIth a rb532 it stopped graphing
Replies: 4
Views: 706

Re: Problem WIth a rb532 it stopped graphing

It no longer graphs interfaces is there a setting i messed up tryed upgrading and it is still not graphing
Try to upgrade to 2.9.14

Regards

--
José Ignacio Acosta
Cibernet Comunicaciones / Mikronet
Joaquín V. González
Salta - Argentina
http://www.mikronet.com.ar
http://www.cibernetcom.com.ar
by cibernet
Sat Feb 25, 2006 3:27 am
Forum: General
Topic: Simple Queues
Replies: 2
Views: 729

Re: Simple Queues

I want ot use 150 simple queues with different priorities. Does this work. I there anybody with similar configuration.
Yes, it works

Regards

--
José Ignacio Acosta
Cibernet Comunicaciones / Mikronet
Joaquín V. González
Salta - Argentina
http://www.mikronet.com.ar
http://www.cibernetcom.com.ar
by cibernet
Sat Feb 25, 2006 3:25 am
Forum: General
Topic: Once more: Bandwith management
Replies: 2
Views: 739

Re: Once more: Bandwith management

Hello forum! I would be glad for some hints on hte following senario: 1. There are several access points for wireless internet access 2. Users are provided with fixed public ip addresses 3. There are different user groups, e.g. “private” or “business” 4. Traffic should be limited / priorized accord...
by cibernet
Fri Feb 24, 2006 7:44 pm
Forum: General
Topic: 2.9.14 Released
Replies: 11
Views: 1748

2.9.14 Released

What's new in 2.9.14: *) fixed upgrade from version 2.8 to keep correct order in web-proxy rule lists and radius server list; *) ping shows more types of ICMP reply messages, including destination unreachable; *) fixed some ethernet card autonegotiation/speed/duplex settings; *) RB500 ether1 interfa...
by cibernet
Fri Feb 24, 2006 4:22 pm
Forum: General
Topic: Mapping 1:1 address
Replies: 14
Views: 1955

But with MikroTik RouterOS being so poerful, you could do it the ordinary way and directly route the Internet and your LAN. This is if your LAN has the internet real IP addresses set. If you don't want to reconfig all puters in the LAN and set them IP addresses than what you're trying to do seems r...
by cibernet
Thu Feb 23, 2006 6:21 pm
Forum: General
Topic: use Microtik as print server as well
Replies: 42
Views: 23009

Re: use Microtik as print server as well

that new feature would be good
:shock: :roll:
by cibernet
Tue Feb 21, 2006 2:40 am
Forum: General
Topic: Queue - HELP, please!
Replies: 9
Views: 1529

You should not create a dynamic queue with the radius server, in that way you can do what you want with mangle ;)

Regards
by cibernet
Tue Feb 21, 2006 2:22 am
Forum: General
Topic: Mapping 1:1 address
Replies: 14
Views: 1955

... MT is way too powerful but maybe only the military are entitled to know how to use it.
Hey, after all, it`s not rocket science :)
:lol:
by cibernet
Tue Feb 21, 2006 1:29 am
Forum: General
Topic: DHCP multiple subnets one segment
Replies: 7
Views: 1332

As an add-on to this, would that require the server itself to have a separate gateway for each subnet? Example:
192.168.2.48/29
User IP: 192.168.2.50
GW IP: 192.168.2.49

Would the router need to have 192.168.2.49 in it's IP address table?
Yes
by cibernet
Mon Feb 20, 2006 11:05 pm
Forum: Wireless Networking
Topic: Recommended antennas for 70km ?
Replies: 24
Views: 7309

well , be sure that in my city ( Baghdad ) there is 100's of wirless clinets and wisp , some of the wisp's using power up to 4W !!!!!! i'm sure there is an interference , the question is how to overcome this problem ?? i cannot say its a bad link , coz its good for hours before hang up !!!! restart...
by cibernet
Mon Feb 20, 2006 11:02 pm
Forum: General
Topic: Mapping 1:1 address
Replies: 14
Views: 1955

Just use bridge....
by cibernet
Mon Feb 20, 2006 3:51 pm
Forum: General
Topic: Connection Limit question?
Replies: 9
Views: 2330

limit sessions for each user / subnet

Regards,
Yes, I understand that, but I am interested in purpose of that.
Why would I want to limit my customer`s p2p connection limit to , lets say, 10 connections? What do I gain by that?
Save bandwith... reduce congestion... ect ect...


Regards
by cibernet
Mon Feb 20, 2006 2:34 pm
Forum: General
Topic: DHCP multiple subnets one segment
Replies: 7
Views: 1332

Great,

This is exactly what I was looking for.

Thanks,

Bill
:wink:
by cibernet
Sun Feb 19, 2006 10:58 pm
Forum: Wireless Networking
Topic: RB532 + RB564 + Six SR2 ????
Replies: 11
Views: 2358

hello sirs,

thanks for the responses, please what if i try to use 2x sr2 and 1 x cm9 to achieve 3 sectors at 120 degrees

has anyone tried it that way ?
I don´t recommend you that... only if you power down one of the SR....


Regards
by cibernet
Sun Feb 19, 2006 10:51 pm
Forum: General
Topic: Mikrotik and Freeradius on one machine ?
Replies: 4
Views: 1257

Re: Mikrotik and Freeradius on one machine ?

You cant use the same BOX... but soon in about 2 months MT will include a Radius Server on MT... Regards thanks for the quick answer! do you know more about the new feature? (is it possible "old" 2.9.13 to upgrade?) first implementation ->now without radius and after upgrade to change on new system...
by cibernet
Sun Feb 19, 2006 10:48 pm
Forum: General
Topic: Different Bandwitdh per IP in Mikrotik
Replies: 9
Views: 1632

Re: Different Bandwitdh per IP in Mikrotik

Hi, I need your help very urgent, please so kind you try to solve the next problem: Nowadays, We were built a Mikrotik router computer. Now we have 29 clients in Wireless network and We hope this number continuously will increasing. Because, We would like to build so system, what Mikrotik server to...
by cibernet
Sun Feb 19, 2006 10:45 pm
Forum: General
Topic: DHCP multiple subnets one segment
Replies: 7
Views: 1332

I understand you can do that, but how does the DHCP server determine which IP address to give to a client? If the DHCP server is listening on one interface and has two pools of ip addresses to choose from, how does it know to give one client a private and one a public? There are no dhcp-relays invo...
by cibernet
Sun Feb 19, 2006 10:39 pm
Forum: General
Topic: port forward all network users!how to?
Replies: 14
Views: 1997

Hey!

You can use torrent with masquarading only!

So don't touch anything as I said, I NEVER said he should block those ports...

How can you make the masquarading?
ip firewall nat add chain=srcnat src-address=(your lan) action=masquerade
Regards....
by cibernet
Sun Feb 19, 2006 5:41 pm
Forum: General
Topic: Mikrotik and Freeradius on one machine ?
Replies: 4
Views: 1257

Re: Mikrotik and Freeradius on one machine ?

Hello together, can everybody help me? my question is: ist it possible to do on the Mikrotik system (2.9.13) the freeradiusserver together (all on one machine?) or must i realy need a 2nd machine with linux or windows and on there the radiusserver. i am new on the mikrotik & linux system, i come fr...
by cibernet
Sun Feb 19, 2006 2:51 pm
Forum: General
Topic: DHCP multiple subnets one segment
Replies: 7
Views: 1332

Re: DHCP multiple subnets one segment

If a physical LAN has more than one logical subnet, how can different groups of clients be allocated addresses on different subnets using MT's DHCP server? If not how would I implement this, what I'm attempting to achieve is using DHCP to service my CPE devices so they can get a private IP address ...
by cibernet
Sun Feb 19, 2006 2:46 pm
Forum: General
Topic: Access to webserver
Replies: 4
Views: 977

Re: Access to webserver

Hi All! Bit of a Mikrotik newbie, and have been fidling around trying to open up a port to one of my internal servers. Scenario is as follows. Static external IP 83.105.58.241 -> Mikrotik firewall ( v2.9.8 ) -> Webserver 192.168.1.242:8050 I'm trying to enable access to this machine. I've looked at...
by cibernet
Sun Feb 19, 2006 2:21 pm
Forum: Wireless Networking
Topic: SR5 and periodic Calibration
Replies: 1
Views: 1428

Re: SR5 and periodic Calibration

Does the SR5 support periodic Calibration and is worth having turned on?
Yes, the SR5 supports it, and it deppeds of your needs... if your climate changes a lot i suggest to enable it...

Regards
by cibernet
Sun Feb 19, 2006 1:59 pm
Forum: Wireless Networking
Topic: help very urgent
Replies: 2
Views: 1052

Re: help very urgent

i configure a wireless router as client with mk 2.9.10 prism 2.5 i was unable to communicate with dlink access point what is the problem pls the dlink is dwl700
Please post your configuration...


Regards
by cibernet
Sat Feb 18, 2006 11:49 pm
Forum: The User Manager
Topic: What happened with topic Mikrotik User Manager (beta)??
Replies: 30
Views: 11635

01. When the user almost reach the time limit, send an e-mail to the user. 02. The option to add the company logo and some other data. 03. The option to translate the user front-end (for checking time, volume balance, ect). 04. If it´s posible to show a pop-up when the user logs in (via pppoe). 05....
by cibernet
Sat Feb 18, 2006 6:45 pm
Forum: Wireless Networking
Topic: RB532 + RB564 + Six SR2 ????
Replies: 11
Views: 2358

Please ciber, have u tried 2 SR2 on a RB500 before and did it ork perfectly.becuse this the main problem i have with a network design for a client of mine.
I have tried 1 SR2 + 1SR5 on RB532, and its working fine


Regards
by cibernet
Fri Feb 17, 2006 12:45 pm
Forum: Wireless Networking
Topic: 2.4 fluctuation, high interefence
Replies: 6
Views: 1594

Do you suggest that lowering basic rates improves constant performance?

yes
by cibernet
Thu Feb 16, 2006 10:57 pm
Forum: Wireless Networking
Topic: Weird Traffic In Wifi Network
Replies: 4
Views: 1380

Ok sorry not doing it in the first place... MT v2.9.2 Flags: X - disabled, D - dynamic, R - running # NAME TYPE RX-RATE TX-RATE MTU 0 R ether1 ether 0 0 1500 1 R ;;; sektor sektor wlan 0 0 1500 2 R Mreza bridge 0 0 1500 3 R ;;; omni omni wlan 0 0 1500 Flags: X - disabled 0 ;;; rodic mac-address=00:...
by cibernet
Thu Feb 16, 2006 9:14 pm
Forum: Wireless Networking
Topic: Weird Traffic In Wifi Network
Replies: 4
Views: 1380

Re: Weird Traffic In Wifi Network

Hi I just read about locking MikroTik with Atheros Cards so i belive that we share the same problem... But when I watch interfaces traffic between two atheros cards (two sector antennas) is very strange, traffic goes to 15Mbs then Goes down to 100Kbs and then again up. And that is happening all the...