Community discussions

MikroTik App

Search found 9 matches

by vovko
Fri Nov 13, 2020 12:22 pm
Forum: General
Topic: option 82 mikrotik
Replies: 0
Views: 193

option 82 mikrotik

hi. i use 82 option at server linux. it is not comfortable sometimes. Because server can locate very far from l2 area and he serves a lot of districts. But i have some amount of mikrotiks on the each of area. how to setup this feature on mikrotik? I asked this question before and a did't get answer....
by vovko
Fri Jan 10, 2020 4:13 pm
Forum: SwOS
Topic: CRS317-1G-16S+RM
Replies: 0
Views: 2997

CRS317-1G-16S+RM

Hi, i took CRS317-1G-16S+RM and i want to use his in my network. In this switch will be configured vlans only, and all traffik will be 5g approximately, on the different ports totaly . I afraid a little bit to use this switch because i did not use him before. Network area is very important where i w...
by vovko
Wed Nov 28, 2018 4:05 pm
Forum: Forwarding Protocols
Topic: help me with BGP
Replies: 8
Views: 1433

Re: help me with BGP

/routing bgp peer add name=AS41601 remote-address=10.100.100.2 remote-as=41601 ttl=default Why peer IP is 10.100.100.2? Why not 89.255.65.67? Do you have direct peering between your iBGP routers? ip =10.100.100.1 use to the RID=95.1(Juniper). it is not correct to use grey ip, but this scheme is wro...
by vovko
Wed Nov 28, 2018 11:04 am
Forum: Forwarding Protocols
Topic: help me with BGP
Replies: 8
Views: 1433

Re: help me with BGP

config RID67: /routing bgp instance set default as=41601 router-id=89.255.95.67 /routing bgp network add network=89.255.95.0/24 synchronize=no add network=89.255.65.0/24 synchronize=no /routing bgp peer add name=AS64512 out-filter=CF-Out remote-address=198.51.100.69 tcp-md5-key=xxxxxxxx ttl=default ...
by vovko
Wed Nov 28, 2018 10:24 am
Forum: Forwarding Protocols
Topic: help me with BGP
Replies: 8
Views: 1433

Re: help me with BGP

There is 0.0.0.0/0 gw 89.255.95.1 in the RID 95.67. default gw can't to create problem in it?

The connections RID67 and RID68 to side AS64512 by IP IP tunnels


Also RID67 has firmware 6.42.1 and RID68 is 6.40.3. it is normal? or it can to do problems?
by vovko
Wed Nov 28, 2018 10:18 am
Forum: Forwarding Protocols
Topic: help me with BGP
Replies: 8
Views: 1433

Re: help me with BGP

In order to forward updates between iBGP peers, they have to be fully meshed by TCP sessions. Are they fully meshed? In order to prevent full routing list from .68, create routing filter with the first rule accept 0.0.0.0/0 and second rule to discard anything. I don't quit clear that you written &q...
by vovko
Tue Nov 27, 2018 10:52 am
Forum: Forwarding Protocols
Topic: help me with BGP
Replies: 8
Views: 1433

Re: help me with BGP

In order to forward updates between iBGP peers, they have to be fully meshed by TCP sessions. Are they fully meshed? In order to prevent full routing list from .68, create routing filter with the first rule accept 0.0.0.0/0 and second rule to discard anything. I don't quit clear that you written &q...
by vovko
Mon Nov 26, 2018 4:18 pm
Forum: Forwarding Protocols
Topic: help me with BGP
Replies: 8
Views: 1433

help me with BGP

Fullview i take only one mikrotik RID 89.255.95.68 on and i don't have to redistribute fullview to the next . After i install two BGP sessions with other provider AS64512. He gives me 130000 prefixes to the each mikrotik. And i have to exchange these routes between mikrotiks. How i can do it? the pr...
by vovko
Tue May 08, 2018 2:59 pm
Forum: General
Topic: dhcp relay option 82
Replies: 0
Views: 550

dhcp relay option 82

Hi! i am from Russia. My English is poor. I need help setting up the mikrotik dhcp server with option 82.
I have a network constructed on switch d-link. I Need to the mikrotik understand the requests from the switch ports d-link.