any suggestions for my problem? I will be grateful for any hints

Switch config: # jan/18/2021 12:26:32 by RouterOS 6.46.1 # software id = 0LAN-B0MR # # model = CRS354-48P-4S+2Q+ # serial number = B8440B40A8FE /interface bridge add admin-mac=C4:AD:34:BD:0E:FD auto-mac=no name=a1tv add admin-mac=C4:AD:34:BD:0E:FD auto-mac=no comment=defconf name=bridge /interface e...

@Buelo, Kid Control is MAC Address based. You might run into problems because a lot of devices are using random MAC addresses for privacy purposes. @borislav, can you share your config ( /export hide-sensitive file=anythingyoulike )? Only situation where I ran into DHCP problems, it was because of ...

Same problem here. I have two separate clients, both with RB1100AhX4 router and CRS354-48P-4S+2Q+RM switch, connected to ether2 of the router. All client devices use the router dhcp server, but through the switch. In the beginning everything was working, but two weeks later problems started. In both...

Hi everybody, As an amateur in this field, I am asking the following question: can CRS354-48P-4S+2Q+RM be used as a router, not only smart switch, if configured properly? There is a place where I have a network with 30-40 FTP cables, and instead of using router + switch, I want to combine everything...

Thank you for the support.

I fixed it.
Yes, with adding the second policy, changing the policy levels to unique, and doing the same with the draytek vigor on the other side (I had forgotten to add the second subnet there...)
Case closed!

/ip ipsec policy print Flags: T - template, X - disabled, D - dynamic, I - invalid, A - active, * - default 0 T * group=default src-address=::/0 dst-address=::/0 protocol=all proposal=default template=yes 1 A src-address=192.168.0.0/24 src-port=any dst-address=192.168.22.0/24 dst-port=any protocol=...

Hello, I have the following situation: A Mikrotik router in my office, with two LAN networks: LAN 1: from ether2 to ether16 with bridge 192.168.0.0/24 LAN 2: from ether17 to ether24 with bridge1 192.168.15.0/24 The Mikrotik router in my office is connected via IPSec tunnel to my Draytek Vigor 2920 i...