MikroTik

james21

hi all i m liitle bit confused to configure for multicast. i have following setup: vlc server---->ether1 (router A )--->AP------->(router B) ether1--->vlc player router A :OS 3rc14 AP : OS 2.9.50 router B : OS 3rc14 so is it work like that? if work then can anyone give me example? thanx in advance. ...

james21

hi

ashish: all the cleints r connectd to base station.

butche:yes i n not use firewall rules over there .no NAT anything at base station.

so whats the solution for that?
i become confused.

plz give me reply.

james21

thanx both of u ashish and butche

according to ur conversation i have to add 3 routes at BASE STATION

dst-add=192.168.10.0/24 gateway=10.10.1.1

dst-add=192.168.20.0/24 gateway=10.20.1.1

dst-add=192.168.30.0/24 gateway=10.30.1.1

am i right?

james21

hi all i m confused to give route at base station. here its my network diagram. 1.JPG how client1 and client2 can access to SERVER ip address 192.168.20.5???? i have to add some routes at Base station.but i can not understand. plz any one help me for routing???? i hope someone help me to sort it out...

james21

hi all , i m little bit confused to configure web proxy. i can not understand abt max-ram-cache-size ,max-cache-size, reserved-for-cache and reserved-for-ram-cache. how can i set (calculate) max ram cache size. i read manual they said if u have memory less than 60 MB u can't enable webproxy. in rout...

james21

thnak u dear

james21

hi all
i want to downgrade my MT RB 333 from router OS 3rc13 to 2.9.50 .
so is it possible to downgrade?
in MT website in download 300 series 2.9.50 OS its not available.
so from where i get 2.9.50 version?

plz anyone try it before suggest me.

thanx
james

james21

hi all MT guru's i m new in mikrotik and i want to share internet connection from one side to another. my network configuration is below: i have public ip and public gateway but i can not undestand from where i can start: 12.JPG i need really help plz plz any one guide me. thanx in advance, james

james21

hi , i did according to u and i can ping it dns ip and public ip in client1 side. i give rules in firewall according to u. internet is not working client side. Client1: 212.75.249.64/29---->ether2(public ip ) & Gateway=212.75.49.61 10.7.254.1/24---->wlan1 10.7.254.10/25----->ether1 routes: 0.0.0...

james21

thanx my dear.

james21

ya u r wright dear.

james21

hi carlos

thanx again.

for example
i have one PUBLIC IP 212.x.x.x and i have MT router boards
so form where can i start??

just give me example plz so i can understand easily.

i hope u help me and i will success to esablish my network

james

james21

hi first of all thanx for quick response. i got the public ip from ATM cisco router. according to ur conversation i have to give one connection from ATM to Mikrotik (C1) ethernet port??? but before i have to give public ip to mikrotik i have to put one HUB and other HUB ports r connected to LAN. pub...

james21

hi all
i think this is very simple for all MT guru's i need little bit help.

i have to provide internet connection from C1 to C2.

base station side i m using Compact Flash (Level 6).

so any one help me for following network setup:
i m using ip address just for example.

james21

thanx ashish. if i m using 5 GHz atheros card which connect to base station and is this possible to configure for hotspot or not??? and hotspot user use wirelss lan adapter (802.11 a/b/g) which support 5GHz band freq. so is it possible to connect hotspot or not??? i m not use another atheros card 2/...

james21

hi all i m little bit confused abt configuring hotspot. i m using AP (Mikrotik)with 5 GHZ frequency band and client connect with same band.i have to configure hotspot at my client CPE (Mikrotik) so how can i configure that?? so how can hotspot users connect with 5 GHz band frequency???? hotspot user...

james21

hi all i want to downgrade the system router OS 3rc13 to 2.9.50. i downgrade it already but when i downgrade the remote client CPE my wireless card become Disable and obviously i disconnect from remote client and i have to travel abt 25 km . so is there any other solution can i downgrade the system ...

james21

hi all
i have mikrotik RB 333 and i have to configure for Hotspot .so plz any one guide me how can i make setup? and which frequency band am i use for hotspot?

if any one guide me step by step i really appreciate .

i hope anyone help me.

thanx in advance.
james

james21

hi
i have compact flash (Level 6) with router OS 2.9.44 when i upgrade my system to 3rc13
i have problem with

1. Unstable signal strength
2. regular packet loss.

plz i need help to solve this problem.

only one solution i think i have to degrade the OS...?

thanx in advance
james

james21

hi i have compact flash (Level 6) with router OS 2.9.44 when i upgrade my system to 3rc13 i have problem with 1. Unstable signal strength 2. regular packet loss. and anybody tell me Copact flash working in Dual core processor or not? so if any one have the solution plz help me. thanx in advance. james

james21

hi all, i have Compact Flash(Level 6) with Router OS 2.9.44 i have to upgrade to version 3rc13 i tried all possible way to upgrade but i can not.so any one tell me whats the problem . and anyone tell me Which motherboard supports Compact flash so i can get better performance?Duo core 2 support CF or...

james21

hi all ,
i have compact flash with Router OS 2.9.44 ,i want to upgrade my system to 3rc14
so how can i upgrade my system?i try to upgrade but ı can not.

pls tell me i m very thankful to u.

thanx in advance
james

james21

hello friends, i m little bit confused at one point.i don't know from where to start.plz help me. i have following network design ATM ------->Hub/switch---------->MT RB 333-----> AP (532A RB)------>client (532A RB) ATM--->212.X.X.X MT RB333-----> 10.9.X.X AP---------->10.9.X.X client----->10.9.X.X i...

james21

hi
i get the email from mikrotik support that they added MULTICAST PACKAGE in RC6 .
but i could not find that.
so when mikrotik introduce Multicast pacakage?
i really need it.

thanx
james

james21

hi all mikrotik gurus,
this is simple problem for u.
i have problem with signal strength
it varies -65 dBm to -80 dBm .so how can i get stable signal strength?
signal to noise is 18 dBm
Tx/Rx CCQ is 36/24.

plz anyone help me i will be appreciate.

plz plz help me.
james

james21

thank u ashish.

james21

hi
i want to setup hotspot with mikrotik.so is it possible can i make setup with MT or not?
i don't have knowledge abt database.is it required radius server for that?
if someone guide me its really appreciate.plz send some example to configure hotspot with mikrotik routers.

thanx in advance
james

james21

thanx for everything.

james21

yes my friend i know i have to add clients in access list. but my question is my AP connecting to base station and its working fine but below in the image u can see that i have to make other link (which is opposite direction to first AP) to same base station with using 2 mini pci cards.so is it poss...

james21

yes i want to connect clients form that side.
so is it possible to make link with same base station or not?
or is there any other solution?
i hope u will give me quick response.

james21

hello friends i connect my AP to AP using WDS static mode.my all access points are working fine but i have question i m already made point to point link with base station and i want to make one point to point link with other side with same base station so how can i make that i hope any one help me t...

james21

hello friends i connect my AP to AP using WDS static mode.my all access points are working fine but i have question i m already made point to point link with base station and i want to make one point to point link with other side so how can i make that i hope any one help me to solve my problem.i m ...

james21

thanx for ur reply my dear. if i want to configure station mode side cpe which is renote side ,for example i want to add any routes then how can i add using winbox form my side. i know i can use mac-telnet but i want to use winbox to control to client side. but i got solution i m using wright now du...

james21

hi
its very easy question for mikrotik gurus.
can anyone tell me how can i control/access my station clients from one place.
i have to use dude/winbox for that?if yes then how can i use it?
plz help me

thanxs in advance
james

james21

hi balimore after long time i m sending u message.my all access point working fine and ur tips its good to establish my network.thanx for that.now i have one question i want to provide internet connection to my clients.so how can i provide them?and which protocol can i used for that?can u give me so...

james21

hi balimore i m very thankful to u for ur tips and its working nice.but i have still one question my dear i hope u will help me to solve. i m connecting two AP like this AP1----------->mode=ap-bridge wds-mode=static wlan1----------->10.1.0.1 ether1--------->10.1.2.1 bridge1---------->192.168.0.1 (wd...

james21

hi normis i m stucked at one point i hope some one will help me. i m connecting 2 AP using WDS static.its working fine.i have one question is it possible to connect client (station mode) to AP or not?if it possible then how can i connect? i m trying to connect like this: but i can't AP----->wireless...

james21

thanx for everything and this tips its helpful for me.

i tried for vpn and its working fine my dear.

james21

thanx again for quick response. i m going to connect two AP using WDS static.i have question abt 1. if i get gateway from isp at which side i put security to secure my router 2.is it required to secure both AP 3.i m connecting two AP like this AP1----------->mode=ap-bridge wds-mode=static wlan1-----...

james21

hello my dear i tried to connect two AP and its working fine. i have one question abt WDS again my dear when i create WDS interface, i have to write wds-address or not? and in wireless tables in wds mode i have to select WDS-default bridge or not? second, i m using 4 atheros cards so can i bridge al...

james21

now i understand my dear.thanx and i m new comer in MT, i hope in the future if i will have any problem u will try to help me. i have one more question abt WDS. i m connecting two AP using wds static.so i get the bandwidth at one access point.so i have to secure my router at both AP or just i have t...

james21

thank u for ur quick response. according to ur conversation virtual ap used in VLAN. am i correct my dear? i already configure VLAN.but when i config. virtual ap and i want to connect this with my client i can't?so is it required same ssid for virtual and as well as for wlan? thanx in advance again ...

james21

hi all

what r the importants of virtual ap?in which situation we use virtual ap?

how can i configure virtual ap for my MT route rboard?

and how can i connect client (MT router board) to this virtual ap?

thanx in advance

james21

thank u normis.

james21

hi ,

can anyone tell me IN WDS what is diff. between static and dynamic.

it will affect on performance or not?

james21

thank u my dear
first of all i m very thankful to u.
i will try and i hope it will work fine.

thanx again

james21

hi i m new in MT. i have 3 office and i want to connect all of them through VPN.i have 3 RB532 A with R52 atheros. i m using 128MB compact flash and 4 wireless card in pc for access point. so plz anybody tell me how can i connect access point to access point and that access point ? is it possible to...

Search found 47 matches