Community discussions

Search found 18 matches

by kristsd
Thu Oct 03, 2019 8:09 am
Forum: RouterBOARD hardware
Topic: As for the equipment purchased in the past two years, it's broken and can't be repaired now.
Replies: 6
Views: 834

Re: As for the equipment purchased in the past two years, it's broken and can't be repaired now.

Unfortunately that will not be possible. All warranty/non-warranty related cases must be addressed to distributor from which you bought the device. Is there no other way, or can you let the dealer return the equipment to the factory for repair? I'm afraid that will not be possible. Manufacturer war...
by kristsd
Tue Oct 01, 2019 1:45 pm
Forum: Beginner Basics
Topic: Login Problems
Replies: 13
Views: 997

Re: Login Problems

I meant without any other configuration - firewall or something else.I have an ip in the same subnet but the problem remains!!!!!!
When you connect via MAC telnet to the device -
Are you able to ping the IP from the subnet IP you have given to the device you are not able to connect via IP telnet?
by kristsd
Tue Oct 01, 2019 10:32 am
Forum: Beginner Basics
Topic: Login Problems
Replies: 13
Views: 997

Re: Login Problems

kristsd i will try to hard reset and just re-create user admin with my own password and no configuration at all and see what will happen.
It is very strange behaviour!!!!
Without a configuration you woun't be able to connect through IP telnet.. only MAC telnet.
by kristsd
Tue Oct 01, 2019 9:53 am
Forum: Beginner Basics
Topic: Login Problems
Replies: 13
Views: 997

Re: Login Problems

Are you able to connect via Telnet if you re-create admin user with full access?
If you are not able to connect with the newest winbox version, problem could be in the configuration.
by kristsd
Fri Sep 13, 2019 1:06 pm
Forum: Wireless Networking
Topic: what is the optimum wireless configuration?
Replies: 8
Views: 1260

Re: what is the optimum wireless configuration?

i will try what you suggest
but i expect stable connection with high speed 80 90 mbps
as i'm 2m far away from Wireless router
You could try reducing tx-power and setting tx-power-mode=all-rates-fixed
to see if that improves the connection ( bear in mind, it will also reduce coverage )
by kristsd
Thu Sep 12, 2019 9:32 am
Forum: Beginner Basics
Topic: Remote update hAP lite
Replies: 14
Views: 1131

Re: Remote update hAP lite

i suggest the following procedure: make backups try disabling hotspot and wireless package to free ram memory, then reboot to leave the device "fresh" (max free memory available) only copy the packages needed to establish the remote connection in your case maybe system, ppp, security, and do the up...
by kristsd
Wed Sep 11, 2019 11:43 am
Forum: Beginner Basics
Topic: Remote update hAP lite
Replies: 14
Views: 1131

Re: Remote update hAP lite

Two options - 1. Removing packages 2. Save configuration somewhere to later apply it. Remove config from device. ( make sure to save IP address and route to be able to connect to the device remotely ), Make sure "/file" is clear and then make a reboot twice, and you will be able to download .npk pac...
by kristsd
Mon Sep 09, 2019 1:35 pm
Forum: General
Topic: PWR-LINE PRO
Replies: 9
Views: 809

Re: PWR-LINE PRO

You could try to re-link both of the devices.
Hold 5 – 8 seconds. A new security key is generated. This is needed to remove a PWR-LINE PRO device from an existing PWR network.
after that, re-link -
Hold 0.5 – 3 seconds. For 120 seconds will try to communicate with another PWR-LINE PRO device.
by kristsd
Fri Aug 30, 2019 9:20 am
Forum: Wireless Networking
Topic: LHG 60 clone from ubiquti
Replies: 13
Views: 2062

Re: LHG 60 clone from ubiquti

http://cdn.shopify.com/s/files/1/1439/1 ... 1566495874

From their webpage source - also twice as expensive, 299$ for a single unit.
by kristsd
Wed Jul 03, 2019 10:14 am
Forum: General
Topic: Logging issue
Replies: 2
Views: 192

Re: Logging issue

Does this happen only in logs every time you connect to the device? Does it also open as many terminals?
To me this looks like a logging issue, could you check your logging settings?
If you can't find anything that could be the cause of it, contact support@mikrotik.com with supout.rif file.
by kristsd
Wed Jul 25, 2018 4:11 pm
Forum: Wireless Networking
Topic: hAP AC lite (952Ui-5ac2nD) - no phone can see 5GHz ac
Replies: 11
Views: 2722

Re: hAP AC lite (952Ui-5ac2nD) - no phone can see 5GHz ac

Is there a chance that those phone's that can't connect has been locked to a specific area?
I can't find much information about galaxy s6 wireless module, but all for what i know, my galaxy s7 do support connections to 5ghz band, 40mhz channel width, with 5180/5500/5800 freq.
by kristsd
Wed Jul 25, 2018 2:29 pm
Forum: Wireless Networking
Topic: hAP AC lite (952Ui-5ac2nD) - no phone can see 5GHz ac
Replies: 11
Views: 2722

Re: hAP AC lite (952Ui-5ac2nD) - no phone can see 5GHz ac

Try to lock it to 20mhz channel with 5180/5500 frequency. Try to use "Join network" in you phone using your ssid and password, if the network isn't visible, doesn't mean it hasn't detected it. If above options doesn't do much, i would try to create a hotspot from both of the phones and see what freq...
by kristsd
Wed Jul 25, 2018 12:22 pm
Forum: RouterBOARD hardware
Topic: Hap ac Lite Reset
Replies: 7
Views: 3688

Re: Hap ac Lite Reset

It's simple, to netinstall just be sure you have unplugged the board from any power source, begin holding the reset button, and while you keep holding the reset button - plug the board to the power source, keep holding till you see it show up on netinstall tool.
by kristsd
Tue Jul 17, 2018 8:25 am
Forum: Wireless Networking
Topic: Dynadish 6 Frequency (Solved) [SOLVED]
Replies: 3
Views: 650

Re: Dynadish 6 Frequency [SOLVED]

You should select the right band in order to set the right frequency.
by kristsd
Fri May 18, 2018 9:20 am
Forum: Beginner Basics
Topic: Problem connecting to a wireless network as a client. [SOLVED]
Replies: 4
Views: 451

Re: Problem connecting to a wireless network as a client. [SOLVED]

Hello, have you set up your AP correctly?
by kristsd
Wed May 16, 2018 8:22 am
Forum: General
Topic: 6.42rc37 CCR Disk full - can't upgrade
Replies: 3
Views: 738

Re: 6.42rc37 CCR Disk full - can't upgrade

You could try upgrading through a Netinstall, as i think your total HDD size is somewhat less than it should be, that should fix the issue.
by kristsd
Mon May 14, 2018 12:36 pm
Forum: General
Topic: 6.42rc37 CCR Disk full - can't upgrade
Replies: 3
Views: 738

Re: CCR Disk full - can't upgrade

Hey,
To what version of ROS are you trying to upgrade?