Can you elaborate a little bit?it has some dst nat based on my requirement
Neither have you.And clearly you haven't read the forum posts.../routing/route print detail
/ip route/print detail
/routing/route/print detail
/interface ethernet switch vlan
add independent-learning=yes ports=ether1,ether4 switch=switch1 vlan-id=101
/interface bridge vlan
add bridge=bridge comment=LAN tagged=bridge,sfp5,sfp-sfpplus4,sfp-sfpplus3 untagged=sfp4 vlan-ids=30
/interface/bridge/ set vlan-filtering=yes 0
/container/config/set username=myusername password=mypassword
RB 4011 after upgrading to v7.9 does not connect using SFP S+DA0001. It has been tested on other RB4011's, and they all have the same problem.
https://mikrotik.com/product/rb4011igs_rmPassive DAC (MikroTik S+DA0001/S+DA0003) are not supported.
/ip/firewall/filter export
add action=accept chain=input connection-state=established,related
Second last paragraph on the very first post:feature request: Administrator portal or customers menu as the old one.
there won't be a separate administrators portal as in the old User Manager.
*) disk - improved external storage file system mounting, formatting and naming;
/container/envs/add key=cap-add name=MYCONTAINER value=NET_ADMIN
/container/envs/add key=device name=MYCONTAINER value=/dev/net/tun
/container/shell 0
add dst=/var/log/nginx name=openspeed src=/disk1/openspeed/var
What IPSec problem?Hi, ipsec problem are fixed ? somebody knows ?
Very useful informations for help you,
a post full of details....
*) chr - fixed booting with added additional SCSI disk;
This brings us one step closer to Zerotier on CHR. Is there any documentation on how to enable tun/tap devices for a container?*) container - added tun/tap support for containers;
You can run Zerotier in a Docker container on CHR.Still no timeline for supporting other architectures? I bought a Hap ac3 just to try it out and it works great! But I'm literally waiting for you guys to support x86/CHR before purchasing any more licenses!
Yep. Had a snapshot so reverted back. Any idea what command I should actually use not to brick the vm again?reload last vm backup you made before do that test
mikrotik container failure: not allowed by device-mode
system/device-mode/update mode=home
Warning: cpu not running at default frequency
"ZeroTier IP addresses and routes can overlap public IP space."What does "Allow Global" do?
Then it's not sorted then is it? If it was it would be in the changelog!MPLS / VPLS sorted??
I cant find anything in the changelog
You need to remove any extra packages you have installed first.It stuck on "calculating download size..." when trying to update from any ROS 6.
There was/is an issue with some DACs not working on some devices. This might be your issue.Like mentioned in original post, did this, still the same issue.
Big jump in Linux kernel version. What else would you expect?High memory usage on Caplite and RB750gr3 after 7.1b6
(About 16 MB more than version 6.49 )
6.49 => 44.1MB free memory
7.1b6 => 27MB free memory
Indeed. I only disabled it for a moment to test if it might have been a firewall issue. And indeed it was! See the post I marked as resolved.disabling that rule is very dangerous. better add accept rule from zerotier1 interface
/ip/firewall/filter/add chain=input dst-address=127.0.0.1 action=accept
I tried adding the firewall entries but no luck unfortunately. Maybe it's a bug?I found the official MikroTik docs really helpful for getting ZeroTier going: https://help.mikrotik.com/docs/display/ROS/ZeroTier
@Normis thank you and kudos for bringing this to life....time to fire up my CHR for testing, before I try to fry my RB4011
Facing issues with ospf. It keeps flapping.
primary-band: B3@20Mhz earfcn: 1700 phy-cellid: 292
ca-band: B20@10Mhz earfcn: 6300 phy-cellid: 85
Sure - I'm using LibreNMS. SNMP monitoring of RouterOS.Hey - Could I ask how you accessed those graphs ? Is it within the RouterOS Software or some other 3rd party?